1 TODO/bugs in Irssi SILC client
2 ==============================
4 o Fix the silc_channels_join to parse the command like, with fe.
5 silc_parse_command_line, because currently it ignores all options,
6 including passphrase which makes autojoin impossible to +a channels.
7 Other important options are ignored too.
9 o Add local command to switch the channel's private key when channel has
10 several private keys. Currently sending channel messages with many
11 keys is not possible because changing the key is not possible by the
14 o /cumode for unknown nick does not give any error message.
17 TODO/bugs In SILC Client Library
18 ================================
20 o The PRIVATE_MESSAGE_KEY packet is not handled (it is implemented
21 though). This should be added and perhaps new client operation
22 should be added to notify application that it was received and
23 set the key only if application wishes to set (accept the key) it.
25 o Additions to do after protocol version 1.1:
27 o Fix the NICK_CHANGE notify handling not to create new entry
28 for the changed client, but take the nickname from the notify
29 (removes need for resolving as well). Protocol TODO entry 3.
31 o Add support for list of errors in command replies. Protocol
35 TODO/bugs In SILC Server
36 ========================
38 o Configuration file additions:
40 o Add support for multipe PublicKey params in connections
41 sections. For now, add this support only in Client and not
42 in ServerConnection nor RouterConnection.
44 o Add version handling, to allow, disallow certain versions to
47 o Add incoming connection frequency, incoming connection frequency
48 for single IP address, key exchange frequency, key exchange
49 frequency for single IP. Add also frequency base.
51 o Add hashed passwords to config file.
53 o Add rehashing support.
55 o If server send CUMODE_CHANGE notify (like setting founder) to router
56 and router does not have founder on channel (founder is left or there's
57 no founder on channel at all), the router will accept the server's
58 founder mode change, even though it perhaps should not do that.
60 o The router should check for validity of received notify packets from
61 servers (after all buggy servers may send notify that is actually
62 something that should have not been sent).
64 o Add a timeout to handling incoming JOIN commands. It should be
65 enforced that JOIN command is executed only once in a second or two
66 seconds. Now it is possible to accept n incoming JOIN commands
67 and process them without any timeouts. THis must be employed because
68 each JOIN command will create and distribute the new channel key
69 to everybody on the channel.
71 o Backup router related issues
73 o Channel user mode changes are notified unnecessarely when
74 switching to backup router on router crash.
76 o Lots of statistics updating is missing around the server.
78 o If client's public key is saved in the server (and doing public key
79 authentication) then the hostname and the username information could
80 be taken from the public key. Should be a configuration option!
83 TODO/bugs In SILC Libraries
84 ===========================
86 o Fix possible buffer overflows in silc_id_render function.
88 o WIN32 silc_net_create_connection_async does not work the same way
89 than on Unix. Do it with threads on WIN32. The function works but
90 is not actually async currently.
92 o Rewrite the lib/silcsim/silcsim.h. The SilcSimContext should be
93 private and silc_sim_alloc should take necessary arguments.
95 o SILC RNG does not implement random seed files, and they should be
98 o The SilcSocketConnection in the SFTP interface is actually redundant
99 and should perhaps be removed. The application can save it in the
100 context it provides, which is delivered by SFTP libary to all
103 o EPOC specific additions/changes required:
105 o lib/silcutil/epoc routines missing or not completed.
107 o Rewrite the lib/silcutil/silcprotocol.[ch] not to have
108 [un]register functions, but to make it context based all the
109 way. The alloc should take as argument the protocol type and
110 its callback (not only final callback). It is not good that we
111 have now global list of registered protocols.
113 o Global RNG should not be allowed on EPOC, since it won't
114 work. Every function in library that calls the global RNG must
115 also take the RNG context as argument so that application can
116 provide it if it doesn't want to use global RNG.
118 o Think some solution to the global crypto lists in lib/silccrypt.
119 They won't work on EPOC.
121 o Something needs to be thought to the logging globals as well,
122 like silc_debug etc. They won't work on EPOC. Perhaps logging
123 and debugging is to be disabled on EPOC.
126 TODO in Toolkit Documentation
127 =============================
129 Stuff that needs to be done in order to complete the Tooolkit Reference
132 o Lots of ROBOdoc header formatting is undone in lib/silcutil, and
135 o Write "Programming with Toolkit" document, describing how to build
136 Toolkit, how the build system works, where is everything, how
137 new (external) projects can be glued into Toolkit (use irssi as an
138 example), and how external projects can use Toolkit without gluing into
139 it (how to link etc), debugging, architecture, types, etc.
141 o Write "Platform Implementations" document to describe what platforms
142 Toolkit support, what has been implemented, what has not been, what
143 wors differently etc.
146 TODO in SILC Protocol
147 =====================
149 Current protocol version is 1.0. However, it is far from being perfect,
150 and needs to include additional features. Following protocol TODO entries
151 describe new stuff to be added to protocol versions 1.x.
153 1. Re-define the Status Payload: it is now 16 bits, split it into two
154 8 bits fields. First field includes status types from 0 - 9 and
155 10 - n *if* it is not an list of errors. If it is list of errors then
156 the first field includes 1, 2 and/or 3, and the second field includes
157 the error status 10 - n. This way it is possible to send multiple
158 errors (list of errors) and we have a way to tell the receiver that
159 there will be other errors as well. The second field is used only
160 if there is list of errors. If normal status, or normal (single)
161 error status the second field is set to zero, and must be ignored.
162 Hence, the status works same way as now except for list of errors.
163 To be included in protocol version 1.1.
165 2. Define that WHOIS and IDENTIFY commands must send list of errors
166 if multiple Client ID (or Channel ID and Server ID for IDENTIFY) was
167 requested and was not found. Each unfound entry must cause an error
168 command reply to the sender. Also define that errors must be sent
169 *after* sending successfully found entries (this way receiver may
170 ignore them). To be included in protocol version 1.1.
172 3. Define the NICK_CHANGE notify to send the changed nickname as a new
173 third argument. This will make the NICK_CHANGE notify handling easier
174 in the receiver's end (client primarily) since it removes the
175 requirement that receiver must resolve (using IDENTIFY or WHOIS) the
176 new Client ID received in the notify (because of the new nickname is
177 unknown). To be included in protocol version 1.1.
179 4. Add "request parameters" or similar to the WHOIS command, which can
180 be used to request various parameters (something not returned by
181 standard WHOIS command) about clients (info that could be fetched
182 even from clients). Additional specification (or appendix) should
183 be done to define the payload and the parameters. It could be used
184 to make the WHOIS command support various search conditions as well.
185 This would be the way to extend the WHOIS command to support various
186 new features without always making the command incompatible to previous
187 version. To be included in protocol version 1.1.
189 5. Inviting and banning by public key should be made possible. To be
190 included in protocol version 1.x.
192 6. Add perhaps SILENCE_USERS, SILENCE_OPERS channel user modes which
193 can be used to silence (moderate) normal users and opers (this set
194 only by founder). To be included in protocol version 1.1.
196 7. Channel Message Payload needs slight redesining to include the IV
197 field to the MAC generation of the payload. It is authenticated
198 by the packet's MAC but not by the payload's MAC. Since the IV
199 belongs to the payload, its integrity should be protected by the
200 payload MAC and not alone by packet MAC. To be included in protocol
203 8. Remove the administrative commands from the protocol all together.
204 It does not make sense for the protocol to define how a server is
205 reconnected or shutdown, since they are implementation and
206 configuration issues. Besides protocol provides only limited set of
207 administrative commands and cannot define all that one could imagine.
208 To be included in protocol version 1.1.
210 9. Add SILC_MESAGE_FLAG_REPLY for being other side to the
211 SILC_MESSAGE_FLAG_REQUEST. Add generic SILC_MESSAGE_FLAG_DATA, which
212 can include generic payload, which can include generic data. The
213 payload definition is left out for now. To be included in protocol
216 10. Check command reply error status types in various commands,
217 specifically NO_FOPRIV is missing from many commands. To be
218 included in protocol version 1.1.
220 11. Change the wording in Private Message Key Payload definition to
221 describe the problems of trusting the payload, and to indicate that
222 the receiver may not accept the key in the payload, and to describe
223 other means of distributing a key.
225 12. The router to router connection diagram in spec-xx is showing the
226 primary routers direction to wrong direction. Swap it.