1 Sun Sep 2 17:17:24 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
3 * Fixed WIN32 configuration in the ./configure script.
4 Fixed to include xti.h on environments that has it.
5 Patches by Carsten Ilchmann and andrew.
7 Sat Sep 1 00:29:33 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
9 * Changed the silc_id_create_client_id to be collision
10 resistant. It is now assured that there cannot be created
11 two same client ID's. I suspect that some weird bugs in
12 the server were actually caused by duplicate Client IDs.
13 Affected file silcd/serverid.[ch]. A router receiving
14 new ID now also assures and informs the sending server
15 if the ID caused collision.
17 * Changed the silc_id_create_channel_id to also assure that
18 there are no collisions.
20 Wed Aug 29 17:55:01 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
22 * Statement about ignoring the Mutual Authentication flag when
23 performing rekey with PFS was a bit misleading. It is ignored
24 if it was set in the initial negotiation, it cannot be even
25 set in the rekey. Fixed in the ke-auth draft. Started the
26 new versions of the protocol drafts in the doc/.
28 Sun Aug 26 14:59:15 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
30 * Fixed a bug in silc_client_command_identify_save when saving
31 new channel information. The channel name was no duplicated
32 and caused crash on exit. Affected file is
33 lib/silcclient/command_reply.c.
35 Fri Aug 17 23:07:45 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
37 * Fixed the getkey command handling in the server. Send just
38 empty OK reply to the sender if the key could not be fetched
39 (but everything else was ok, like the key just was not available).
40 Changed the public key parameter to optional in the protocol
41 specs so that empty OK reply can be sent. Affected file
44 Added a message to Irssi SILC client to tell to user if the
45 server did not return a public key.
47 Tue Aug 14 07:29:27 CEST 2001 Pekka Riikonen <priikone@silcnet.org>
49 * Fixed a channel key regeneration bug. It registered new
50 timeout tasks exponentially until all system resources were
51 used. Affected file silcd/server.c.
53 Sun Aug 12 20:48:14 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
55 * Added the SILC Document generator to the scripts/silcdoc.
56 It can be used to generate the Toolkit Reference Manual out
57 of the source tree. Internally it will also use the RoboDoc
58 generator now imported in util/robodoc.
60 Sun Aug 12 12:28:17 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
62 * Added couple of return's in rekey protocol if error orccurred
63 during the protocol. The execution must be terminated.
64 Affected file silcd/protocol.c. Also, terminate the protocol
67 Sat Aug 11 12:36:02 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
69 * The client's Client ID was created initally from the wrong
70 nickname (it could have been in format nick@host) in the
71 silc_server_new_client. Affected file silcd/packet_receive.c
73 Sat Aug 11 00:29:57 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
75 * Added some SILC_LOG_ERROR's to various error conditions
76 if client could not be added to ID cache. Affected files
77 silcd/packet_receive.c and silcd/server.c.
79 * When client's sock->user_data is freed, NULL also the
80 client->router and client->connection pointers. Added check
81 for these pointers being NULL to various places around the
82 code. Affected file silcd/server.c.
84 * Added client->data.registered == TRUE checks to various
85 places around the code to assure that unregistered client's
86 are not handled when it is not allowed. Affected file
89 * Added `bool registered' fields to all
90 silc_idlist_[server|client]_get_* routines to indicate whether
91 the fetched client needs to be registered or not. Affected
92 file silcd/idlist.[ch].
94 * Add your own entry as registered to the ID cache in the
95 server. Affected file server.c.
97 * Fixed a bug in silc_server_new_server. The SilcServer was
98 set as the new server's context instead of SilcServerEntry.
99 This naturally caused some weird bugs.
101 Thu Aug 9 18:28:37 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
103 * Do not delete the channel rekey task when adding it
104 for in silc_server_create_channel_key.
106 * Changed the silc_server_create_channel_key to return
107 TRUE or FALSE to indicate the success of the channel key
110 Thu Jul 26 11:32:31 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
112 * Fixed MSVC++ project files and added missing files to
113 Makefiles under win32/.
115 Wed Jul 25 18:43:54 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
117 * Do not add TCP_NODELAY flag if the operating system
118 does not have it defined. Affected files are
119 lib/silcutil/[unix/win32]/silc[unix/win32]net.c.
121 * Fixed buffer overflow from Irssi SILC Client. Affected
122 file irssi/src/fe-common/core/themes.c.
124 * Fixed double free in client library in the file
125 lib/silcclient/client.c when disconnecting from server.
127 * Applied double free patch from cras to Irssi SILC client.
128 Affected files irssi/src/core/[modules/expandos].c
130 * Fixed the disconnection handling to Irssi SILC Client.
131 The application must call silc_client_close_connection
132 in ops->connect client operation in case of failure of
133 the connection. Affected file is
134 irssi/src/silc/core/client_ops.c.
136 * Do not set sock->protocol to NULL in the function
137 silc_client_close_connection after executing the protocol's
138 final callback since the sock might not be valid anymore.
139 Affected file lib/silcclient/client.c.
141 Wed Jul 25 16:04:35 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
143 * Do not enable SILC_THREADS if the linking with libpthread
144 did not happen. Affected file configure.in.pre.
146 * Added notion to protocol specification that server must
147 verify the sent authentication payload with CMODE when
148 setting the channel founder key. Implemented it to the
149 server. Affected file silcd/command.c.
151 Mon Jul 23 18:31:43 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
153 * Added _EXTRA_DIST SILC distribution variable to the
154 distributions file. It is used to conditionally add extra
155 files or directories to the specific distribution. Affected
156 files ./prepare, Makefile.am.pre and distributions.
158 Removed the `_' from the start of the distribution names.
161 * Added README.WIN32 for instructions to compile the Toolkit
164 Mon Jul 23 10:12:37 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
166 * Fixed a double free in disconnection in the server. Affected
167 file is silcd/server.c.
169 * Fixed the lib/silcske/groups.c to work now also with GMP
170 MP library. The string conversion did not work when using
171 specific base and the base is indicated in the string as well.
173 * Created win32/ directory which now includes MSVC++ specific
174 stuff so that toolkit (DLLs) may be compiled with MSVC++.
175 It will appear only in the toolkit distribution
177 Sun Jul 22 19:40:30 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
179 * Changed the key material distribution function in case when
180 the hash output is too short. The data is now concatenated
181 a bit differently than it used to. Made the change to the
182 SKE protocol specification.
184 * Added better GMP detection to configure.in.pre. A patch
187 Fri Jul 20 13:16:00 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
189 * Fixed a minor bug in SKE that might cause some problem on
190 some platforms. Affected file lib/silcske/silcske.c.
192 * Added the cookie checking for initiator in the SKE. It checks
193 that the responder returns the sent cookie unmodified. The
194 affected file is lib/silcske/silcske.c. Added new SKE
195 error type INVALID_COOKIE that can be sent during the
196 negotiation. Fixed some memory leaks as well.
198 * Added the "invalid cookie" error message to Irssi SILC client's
201 Thu Jul 19 21:44:31 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
203 * Added `task_max' field to the SilcClientParams to indicate
204 the maximum tasks the scheduler can handle. If set to zero,
205 default values are used. Affected file lib/silcclient/silcapi.h.
207 * Fixed memory leaks in silc_client_close_connection. Affected
208 file lib/silcclient/client.c.
210 * Added silc_client_del_client_entry to client library to free
211 all memory of given client entry. Affected file is
212 lib/silcclient/idlist.[ch].
214 * Added new functions silc_client_del_channel and
215 silc_client_del_server to delete channel and server entries.
216 Affected file lib/silcclient/[silcapi.h/idlist.c].
218 * Removed silc_client_del_client_by_id from silcapi.h.
220 * Fixed the INFO command to return the server's own info
221 correctly when querying by Server ID. Affected file is
224 Thu Jul 19 14:47:30 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
226 * Removed the non-blocking settings in WIN32 code in the
227 silc_sock_[read/write] and added SleepEx instead. Affected
228 file lib/silcutil/win32/silcwin32sockconn.c. The availability
229 of input data is now checked with FIONREAD and ioctlsocket.
231 Wed Jul 18 18:34:01 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
233 * Call silc_schedule_task_del_by_context in the
234 silc_protocol_cancel instead of silc_schedule_task_del_by_callback.
235 Affected file lib/silccore/silcprotocol.c.
237 * Call silc_protocol_cancel for active protocols in the
238 silc_server_close_connection if the funtion
239 silc_server_free_sock_user_data has not been called.
240 Affected file silcd/server.c.
242 * Generic tasks cannot be deleted using the del_by_fd
243 task deleting function since generic tasks does not match
244 any specific fd. Affected file lib/silcutil/silcschedule.[ch].
246 * Added a notion to SILCOPER help file that the SILCOPER works
247 only on router server, not on normal server.
249 Wed Jul 18 09:40:04 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
251 * Added for WIN32 support for the new scheduler as well.
252 Affected file lib/silcutil/win32/silcwin32schedule.c.
254 * Fixed the SHA1 implementation to work on various platforms.
256 Tue Jul 17 23:04:10 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
258 * Rewrote the SILC Scheduler entirely. Removed the old SILC Task
259 API. It is part of the scheduler now. Everything else is
260 as previously but some functions has changed their names.
261 Checkout the lib/silcutil/silcschedule.h for the interface.
262 Updated all applications to use the new interface. Affected
263 files are lib/silcutil/silcschedule.[ch].
265 Tue Jul 17 16:53:30 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
267 * Found a bug in the SKE implementation. The HASH value,
268 specified by the protocol, was not computed correctly. The
269 public key of the responder was not added to the computation
270 even though it is mandatory. Affected file lib/silcske/silcske.c.
271 This unfortunately causes incompatibilities with older
274 * Added WIN32 specific network init and uninit functions:
275 silc_net_win32_init and silc_net_win32_uninit to init and uninit
276 the Winsock2. Affected file lib/silcutil/silcnet.h and
277 lib/silcutil/win32/silcwin32net.c.
279 * Set the socket always to nonblocking mode on WIN32 after
280 reading data or writing data. Affected file is
281 lib/silcutil/win32/silcwin32sockconn.c.
283 Mon Jul 16 22:55:26 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
285 * Fixed various compilation problems under WIN32. Affected
286 files lib/silcutil/win32/silcwin32thread.c and
287 lib/silcutil/win32/silcwin32schedule.c.
289 * Removed all _internal.h #includes from public header
290 files. Internal headers must never be included from
293 Removed also the lib/silcske/payload_internal.h file.
295 * All include files that may be needed (public and some others
296 included by the public headers) by application developers are
297 now copied to the ./includes directory. It does not copy any
298 internal headers. Affected file Makefile.defines.pre and all
299 Makefile.am's under lib/ and subdirs.
301 Thu Jul 12 17:49:31 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
303 * Do not change the ~/.silc directory's permissions automatically.
304 Affected file irssi/src/silc/core/clientutil.c.
306 Thu Jul 12 10:18:40 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
308 * Do not cancel the protocol in silc_server_close_connection
309 it might cause recursion. Now cancelled in the function
310 silc_server_free_sock_user_data. Affected file silcd/server.c.
312 * Fixed the silc_server_remove_clients_by_server to regenerate
313 the channel keys correctly finally. Added also new function
314 silc_server_remove_clients_channels to actually do it.
315 Affected file silcd/server.c.
317 * Fixed the silc_server_new_channel to not crash by giving
318 wrong router to the new channel. Affected file is
319 silcd/packet_receive.c.
321 Wed Jul 11 18:31:57 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
323 * Added SilcClientParams structure to the lib/silcclient/silcapi.h
324 which is given as argument to the silc_client_alloc now.
325 It can be used to configure the client and set various parameters
326 that affect the function of the client.
328 * The USERS command in server did not check whether the channel
329 is private or secret. Affected file silcd/command.c.
331 * Added new argument to the USERS command in protocol specification.
332 The USERS command now can take the channel name as argument
333 as well. Added support for this in client and server and
334 updated the protocol specs.
336 * Completed the GETKEY command in client. It can be now used
337 to fetch also servers public key not only some clients.
338 Affected files lib/silcclient/command[_reply].c.
340 * Added silc_client_get_server to return server entry by the
341 server name. Affected files lib/silcclient/silcapi.h and
344 * Redefined the IDENTIFY command in protocol specification to be
345 more generic. It now can be used to query information about
346 any entity in the SILC Network, including clients, servers and
347 channels. The query may be based either the entity's name
348 or the ID. Added support for this in both client and server.
350 Affected files silcd/command.c and lib/silcclient/command.c
353 * Optimized the WHOIS and WHOWAS commands in the server. Removed
354 the _from_client and _from_server functions. Affected file
357 * Added silc_client_get_channel_by_id_resolve to the file
358 lib/silcclient/silcapi.h to resolve channel information by
359 its ID. Added also silc_client_get_channel_by_id that
360 does not resolve it from the server.
362 Tue Jul 10 18:05:38 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
364 * Added SilcServerEntry context into the client library
365 to represent one server. The INFO command now allocates
366 these to save the resolved server info. For now on the
367 client library will also keep information about servers,
368 connected and resolved with INFO.
370 The INFO command now allocates the SilcServerEntry context
371 and saves the server info there. The COMMAND_REPLY in
372 the INFO now returns the parameters to application in
373 same order as defined in the protocol specification.
375 The entries are cached in the client->server_cache.
377 * The INFO command is now issued after received the Client ID
378 from the server. Affected file lib/silcclient/client.c.
380 * The CMODE_CHANGE notify may now return also an SilcServerEntry
381 to the application as the mode changer might be server.
382 It is guaranteed that NULL is not returned anymore to the
383 application. Affected file lib/silcclient/client_notify.c.
385 The ID Type is now also passed to the application so that
386 it can check whether the returned entry is SilcClientEntry
389 Added new function silc_client_get_server_by_id to return
390 the server entry by ID. Affected files are the
391 lib/silcclient/silcapi.h and lib/silcclient/idlist.c.
393 * Do not create the channel in the Irssi SILC Client when issuing
394 the JOIN command but when received the sucessful JOIN command
395 reply. Otherwise the channel might get created even though we
396 could not join it. The Affected file is
397 irssi/src/silc/core/[silc-channels.c/client_ops.c].
399 * Fixed a channel joining bug in router. The router must also
400 check the channel modes, invite and ban lists etc. when serving
401 the JOIN command sent by normal server. Affected file is
402 silcd/command.c. The router now resolves the client's
403 information from the server who sent the JOIN command if it
404 does not know it, and processes the JOIN command only after
407 * Changed the SilcCommandCb to take new argument; void *context2.
408 Affected file lib/silccore/silccommand.h
410 The second argument in the command callbacks in the server now
411 includes the SilcServerCommandReplyContext if the command was
412 called as pending command callback from the command reply.
413 Otherwise it is NULL. When called as pending the status of the
414 command reply will be checked and if it was erronous the
415 error will be sent to the original sender of the command.
416 This way the client always receives the error messages even
417 though the server was actually the one who received the error
418 when it resent the command to router, for example. Affected
419 files silcd/command[_reply].[ch].
421 * Fixed sending WHOWAS command's error message to client if
422 the requested client could not be found. It was missing.
425 * Changed the CMODE and CUMODE commands reply arguments in the
426 protocol specification. The Channel ID is now sent in both
427 of the commands to identify the channel. Implemented this
428 new feature to the client and server. Affected files
429 lib/silcclient/command_reply.c and silcd/command.c.
431 * Made better checks for invite and ban lists in the JOIN
432 command in server. Affected file silcd/command.c.
434 Mon Jul 9 18:28:34 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
436 * The server now performs the incoming host IP/DNS lookup
437 using the silc_socket_host_lookup and thus does not block
438 the server anymore. Affected file silcd/server.c.
440 * Completed the multi-thread support for SILC Scheduler in
441 the lib/silcutil/silcschedule.c.
443 * Fixed the configure.in.pre to detect the pthread correctly
446 * Fixed a deadlock in silc_task_queue_wakeup in the file
447 lib/silcutil/silctask.c.
449 Mon Jul 9 13:40:03 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
451 * Added new function silc_schedule_wakeup that is used in
452 multi-threaded environment to wakeup the main thread's
453 schduler. It needs to be used when a thread adds a new task
454 or removes a task from task queues. After waking up, the
455 scheduler will detect the task queue changes. If threads
456 support is not compiled in this function has no effect.
457 Implemented the wakeup mechanism to both Unix and WIN32
458 systems. Affected files are lib/silcutil/silcschedule.[ch],
459 lib/silcutil/unix/silcunixschedule.c and the
460 lib/silcutil/win32/silcwin32schedule.c.
462 * Added new function silc_task_queue_wakeup to wakeup the
463 scheduler by the specified task queue. Affected file
464 lib/silcutil/silctask.[ch].
466 * The silc_socket_host_lookup_start now wakes up the scheduler
467 after adding the timeout task. Affected file is
468 lib/silcutil/silcsockconn.c.
470 * The silc_socket_host_lookup is synchronous now if the threads
471 support is not compiled in. However, the callback is still
472 called asyncronously through the scheduler, anyway. Affected
473 file lib/silcutil/silcsockconn.c.
475 Mon Jul 9 00:24:45 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
477 * Added new function silc_socket_host_lookup to perform
478 asynchronous IP and FQDN lookups for the socket connection.
479 Affected files lib/silcutil/silcsockconn.[ch].
481 Sun Jul 8 18:44:53 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
483 * Added SILC_MUTEX_DEFINE to define the mutex on environments
484 that may or may not compile the mutex support in.
486 Changed the silc_mutex_alloc interface. It allocates the
487 mutex now to the sent pointer and returns TRUE or FALSE.
489 Affected file lib/silcutil/silcmutex.h.
491 * Wrote the SILC Task Queue interface to support multi-threads.
492 Affected file lib/silcutil/silctask.[ch].
494 * Wrote the SILC Scheduler to support multi-threads. Affected
495 file lib/silcutil/silcschedule.c.
497 Sun Jul 8 11:16:01 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
499 * Implemented the SILC Mutex API and SILC Thread API for WIN32
500 in lib/silcutil/win32/.
502 Sun Jul 8 00:18:15 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
504 * Defined SILC Mutex API and SILC Thread API and implemented
505 them for Unix. Affected files are
506 lib/silcutil/silcmutex.h, lib/silcutil/silcthread.h,
507 lib/silcutil/unix/silcunixmutex.c and
508 lib/silcutil/unix/silcunixthread.c.
510 Sat Jul 7 14:40:31 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
512 * Fixed the silc_server_remove_clients_by_server's channel
513 key re-generation. The hash table handling was incorrect
514 and would not work with many channels. Affected file is
517 * Fixed some memory leaks around the server code.
519 * Rewrote the silc_server_get_users_on_channel to support IPv6
520 based Client ID's. Affected file silcd/server.c.
522 * Defined the SILC_MESSAGE_FLAG_SIGNED to the protocol
523 specification. However, a separate document must be written
524 to define the detailed signing procedure and the payload
525 associated with the flag. Defined the flag to the
526 lib/silccore/silcchannel.h as well.
528 Fri Jul 6 18:26:31 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
530 * Changed the dynamic tables to static size tables in the
531 lib/silccrypt/silchmac.c.
533 * Removed GCC dependencies from the code. A patch by cras.
535 Fri Jul 6 09:39:35 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
537 * Do not show the error "Error receiving packet bla bla"
538 in server if it really was not an error (-2 means that reading
539 is pending). Affected file silcd/server.c.
541 Thu Jul 5 21:22:32 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
543 * Fixed a possible crash in silc_server_remove_clients_by_server
544 in silcd/server.c. Fixed there also some memory leaks.
546 * Fixed the silc_idlist_replace_client_id. It could replace
547 wrong key in the hash table. Affected file silcd/idlist.c.
549 * Do not check whether there are global users on the channel
550 if the channel->global_users is FALSE. Affected functions
551 silc_server_remove_from_one_channel and
552 silc_server_remove_from_channels in silcd/server.c. Also,
553 do not check if the removed client is local as we can be
554 sure that global client was not removed from the channel
555 and checking for global users is not needed.
557 * The silc_server_remove_clients_by_server now re-generates
558 the channel keys correctly for those channels that had
559 clients removed from them. Affected file silcd/server.c.
561 Tue Jul 3 11:39:20 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
563 * Found the reason of random crashes in the server. We weren't
564 ignoring the SIGPIPE signal (which can be sent in write())
565 and it crashed the server. Affected file silcd/silcd.c.
567 Fri Jun 29 20:05:25 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
569 * Assure that sock->user_data is not NULL in the function
570 silc_server_packet_send in silcd/packet_send.c.
572 * Disconnect the remote connection if it could not be added
573 to any ID lists in the server. The affected file is
576 * Check in silc_server_packet_send[_real/dest] that the
577 socket is not disconnecting and ignore the data if it is.
578 Affected file silcd/packet_send.c.
580 * Define inline to __inline on native WIN32 compilation.
581 Affected file includes/silcwin32.h.
583 * Added some explicit type casts for inline code since MSVC
584 require them. Affected files lib/silcutil/silcbuffer.h,
585 lib/trq/silcdlist.h and lib/trq/silclist.h.
587 * Print warning in log files from now on if the packet
588 decryption fails. Affected file silcd/server.c.
590 Thu Jun 28 21:30:39 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
592 * Changed the `say' client operation's interface to accept
593 new `type' argument to indicate the type of the message sent
594 by the library. The application may filter the library's
595 messages according the type. The affected file is the
596 lib/silcclient/silcapi.h.
598 * Added two new functions to lib/silcclient/silcapi.h:
599 silc_client_del_client and silc_client_del_client_by_id.
600 Affected file lib/silcclient/idlist.c.
602 * Moved the clientincludes.h from includes/ to silc/ and
603 serverincludes.h from includes/ to silcd/.
605 * The modes for the CMODE and CUMODE are now passed as
606 uint32 for application with COMMAND_REPLY. The affected
607 file is lib/silcclient/command_reply.c.
609 Wed Jun 27 22:24:47 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
611 * /WHOIS without arguments shows client's own information.
612 Affected file lib/silcclient/command.c.
614 * Changed PING to not accept any arguments. The specs
615 says that client can ping only the connected server so
616 requiring an argument is not needed. Affected file is
617 lib/silcclient/command.c.
619 Wed Jun 27 00:10:33 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
621 * Fixed a fatal bug in private message sending and reception
622 encryption and decryption when using private message keys.
623 The implementation was incorrect and did not follow the
624 specification. It causd that some of the message were
625 lost since it did not use the sending and receiving keys
626 as the protocol suggests. This has been fixed and will cause
627 incompatibilities with older clients when sending private
628 message encrypted with private message keys. Affected files
629 lib/silcclient/client_prvmsg.c, lib/silcclient/client_keyagr.c
630 and various other in Irssi SILC Client.
632 Added `responder' boolean argument to the functions
633 silc_client_add_private_message_key[_ske] to indicate when
634 the key is added as responder or initiator of the key
637 Tue Jun 26 19:23:07 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
639 * Removed the silc_ske_check_version function and created
640 a SilcSKECheckVersion callback. Added also a function
641 silc_ske_set_callbacks that is now used to set all SKE
642 callbacks. The callback functions are not given to
643 the SKE functions anymore, but this function is used to
646 * Fixed the WIN32 DLL generation in lib/Makefile.am.pre.
648 * Added `silc_version' argument to the silc_client_alloc
649 to define the version of the application for the library.
650 The library will use the version string to compare it
651 against the remote host's (usually a server) version
652 string. Affected file lib/silcclient/silcapi.h
654 * Added the KE protocol context to Key Agreement context
655 in client library so that we can abort the SKE if it
656 is in process when we get timeout. Affected file is
657 lib/silcclient/client_keyagr.c.
659 * Do not resolve the client ID forever if it returns in the
660 first time that such client does not exist. This was done
661 for example with private message. Affected file is
662 lib/silcclient/client_prvmsg.c.
664 Mon Jun 25 21:42:51 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
666 * Do not add regex.h for WIN32. The affected file
667 includes/silcincludes.h.
669 * Added WIN32 DLL generation to lib/Makefile.am.pre. It might
670 not work yet 100%. It generates the DLL's automatically
671 when compiling with --with-win32 under cygwin.
673 Sun Jun 24 19:49:23 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
675 * lib/contrib/regex.c is not compiled on WIN32.
677 * Added silc_net_get_socket_opt function to the
678 lib/silcutil/silcnet.h.
680 * Added includes/silcwin32.h for WIN32 specific includes
683 * Do not use ptime structure or any of the posix process
684 functions on WIN32 in lib/silccrypt/silrng.c.
686 * Added silc_gettimeofday to provide generic function
687 for struct timeval on all platforms. Added the function
688 to lib/silcutil/silcutil.h.
690 Sun Jun 24 12:19:52 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
692 * Moved the lib/silccore/silcsockconn.[ch] to the utility
693 library as they clearly belong there. As a plus side we
694 can make the actual socket connection routines platform
697 Added also new generic function silc_socket_read and
698 silc_socket_write (that used to be silc_packet_[read/write].
699 The implementation of these are platform specific.
701 * Added WIN32 specific routines of silc_socket_[read/write]
702 to lib/silcutil/win32/silcwin32sockconn.c.
704 Sat Jun 23 16:01:00 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
706 * Added preliminary support for native WIN32 compilation under
707 cygwin (using the -mno-cygwin option for GCC) to the
708 ./configure.in.pre. The --with-win32 now prepares the
709 compilation for native WIN32.
711 * Rewrote the SILC Scheduler interface in the file
712 lib/silcutil/silcschedule.h. The scheduler is now context
713 based and does not have anymore any global static scheduler.
714 Moved the Unix scheduler to the lib/silcutil/unix/ directory
715 and created lib/silcutil/win32 directory for WIN32 based
718 * Added Unix specific network routines to the
719 lib/silcutil/unix/silcunixnet.c and the old
720 lib/silcutil/silcnet.c includes now only generic routines.
722 Added WIN32 specific network routines to the
723 lib/silcutil/win32/silcwin32net.c.
725 * Added Unix specific utility functions from the
726 lib/silcutil/silcutil.c to lib/silcutil/unix/silcunixutil.c.
728 * Added WIN32 SILC Scheduler to the file
729 lib/silcutil/win32/silcwin32schedule.c. The code is of course
732 Fri Jun 22 10:44:14 EEST 2001 Pekka Riikonen <priikone@silcnet.org>
734 * Do not handle JOIN notify in the server if the target client
735 is not registered (idata->registered == FALSE). The affected
736 file is silcd/packet_receive.c.
738 * Update the nickrec->founder in event_cumode in the Irssi SILC
739 client. Affected file irssi/src/silc/core/silc-channels.c.
741 * Fixed the CUMODE_CHANGE notify handling in the server when
742 server and router are announcing their clients on channels.
743 Now the mode changes are saved and notified correctly. The
744 affected file is /silcd/packet_receive.c.
746 * Fixed silc_idlit_replace_[server/client/channel]_id functions.
747 They really did not replace the cache entry in the ID Cache.
748 Now they do that. Affected file silcd/idlist.c.
750 * Fixed the KICK notify handling in the Irssi SILC client to
751 update the channel records so that the kicked client does not
752 appear to be on the channel. The affected file is
753 irssi/src/silc/core/silc-channels.c.
755 * Always update the conn->current_channel when executing command
756 on a channel. Affected file irssi/src/silc/core/silc-servers.c.
758 * Fixed the KILL notify handling in Irssi SILC client to remove
759 the killed client on all channels.
761 Thu Jun 21 17:10:08 CEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
763 * Fixed the silc_parse_command_line to remove extra spaces
764 from the start and end of the arguments. Affected file is
765 lib/silcutil/silcutil.c.
767 * Cancel and free any active protocol in the function
768 silc_server_close_connection. Affected file silcd/server.c.
770 * Cancel and free any active protocol in the function
771 silc_client_close_connction. Affected file is
772 lib/silcclient/client.c.
774 * Do not execute the KILL command for clients that are in
775 history (ie. they are not in the network). Affected file is
778 * Fixed KILL notify handling, client does not crash anymore.
779 Affected file irssi/src/silc/core/silc-channels.c.
781 * Reduced the default packet buffer size from 2048 to 1024 in
782 lib/silccore/silcpacket.c.
784 * Added SILC_SKE_STATUS_FREED SKE status type and a reference
785 counter to the SKE context that is incresed when the SKE library
786 performs async operation outside the library. If the outside
787 process frees the SKE context and FREED status will be set
788 and the library will detect after the sync operation that the
789 libary is freed. The affected files are
790 lib/silcske/silcske[_status].[ch].
792 * Resolve the client entry information in the function
793 silc_client_channel_message to assure that NULL pointer is not
794 passed as client entry to the application. */
796 * Fixed the task timeout calculation to assure that there is
797 never negative timeouts. The affected file is
798 lib/silcutil/silcschedule.c.
800 * Fixed the channel user mode notification sending in server.
801 It was sent point-to-point to the router (or to server by router)
802 but it needs to be destined to a channel. The routines now
803 supports sending the channel user mode notifys to the channels
804 when announcing clients and channels. Affected files are
805 silcd/server.c and silcd/packet_receive.c.
807 * Fixed the CHANNEL_CHANGE notify handling in the client libary.
808 It did not actually replace the old channel entry in the cache.
809 Affected file lib/silcclient/client_notify.c.
811 Tue Jun 19 22:10:36 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
813 * Fixed a possible crash in silc_packet_send_prepare. It now
814 assures always that there is enough space in the buffer and
815 at the tail area of the buffer (for MAC).
817 Fixed the inbound buffer reallocation in silc_packet_read.
818 It was old code and did not handle the reallocation correctly.
821 The affected file is lib/silccore/silcpacket.c.
823 * Fixed buffer overflow in silc_parse_nickname in the file
824 lib/silcutil/silcutil.c.
826 Tue Jun 19 13:40:09 CEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
828 * make install generates new server keys only if there is not
831 Mon Jun 18 18:49:07 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
833 * Set SILC_MESSAGE_FLAG_NOREPLY when sending the away message.
834 Added check that if the NOREPLY is set then we will not send
835 the away message. This avoids infinite loop of away messages
836 if both clients are away. The affected file is
837 lib/silcclient/client_prvmsg.c.
839 * Fixed client crash if /NICK was given without arguments.
840 Affected file lib/silcclient/command.c.
842 * Server does not send the invite list in INVITE command back
843 to the client if the list was not altered. Added this notion
844 to the protocol spec as well. Affected file silcd/command.c.
846 Fixed possible crash in INVITE command by checking the
847 value of silc_server_get_client_route command.
849 * Fixed the INVITE notify type handling. The arguments are now
850 taken in correct order and client does not crash. The affected
851 file is irssi/src/silc/core/silc-channels.c.
853 Removed the "Inviting xxx to channel" message from the
854 client library away and let the application handle it.
855 Affected file lib/silcclient/command.c. Added that message
856 to Irssi SILC client's message formats.
858 * Fixed CMODE command crash in client. It now checks the
859 amount of arguments correctly and does not crash. The affected
860 file is lib/silcclient/command.c.
862 * Do not create new channel automatically in silc_channels_join
863 but check whether the channel by that name already exists.
864 Affected file irssi/silc/core/silc-channels.c.
866 * Do not send the SERVER_SIGNOFF to router if the disconnected
867 entity was the router. Affected file silcd/server.c.
869 * Added the handling of the SERVER_SIGNOFF notify to the Irssi
870 SILC client as it was missing from there.
872 Added the handling of the KICK notify to the Irssi SILC client
873 as it was missing. Added "you have been kicked" message to
874 Irssi SILC client's message modules formats.
876 Added the handing of the KILL notify to the Irssi SILC client
877 as it was missing. Added the kill message module formats
880 The affected file is irssi/src/silc/core/silc-channels.c.
882 * The router did not save the channel mode the server announced.
883 Affected file silcd/packet_receive.c.
885 * Fixed a possible crash in INFO command in server. If the
886 server did not provide the server info it crashed. Affected
887 file silcd/command.c.
889 Sun Jun 17 15:26:05 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
891 * Fixed the GETKEY command in the server to check also the
892 global list. Otherwise the GETKEY would not work correctly
893 in normal SILC server. Affected file silcd/command.c.
895 Sat Jun 16 18:00:00 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
897 * Fixed GETKEY crash, it crashed if the command did not succseed.
899 Tue Jun 12 21:36:18 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
901 * Redefined the SILC MP API in lib/silcmath/silcmp.h. The API
902 is now real and not just an macro interface to GMP.
904 Removed the entire GMP from the source tree and imported new
905 NSS MPI library instead. Reason for removing GMP is that it is
906 extremely large and compiles extremely slow. The NSS MPI
907 is only a few files and compiles in less than 10 seconds.
908 The speed is also about the same as GMP. The MPI is imported
911 If the system has GMP installed we will still use the GMP.
912 If it is not then the NSS MPI will be compiled.
914 Mon Jun 11 18:07:24 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
916 * Merged a long nickname (127 characters long) crash bugfix from
917 Irssi CVS tree. Affected file irssi/src/core/misc.c.
919 * Merged a freed memory reference bugfix from Irssi CVS tree.
920 Affected file irssi/src/core/commands.c.
922 Sun Jun 10 16:08:35 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
924 * Added the server's public key sving and verification to the
925 server when performing the SKE. This was missing and the
926 remote server's (or router's) public key was accepted without
927 checking whether we have it previously or trust it at all.
928 Affected file silcd/protocol.c.
930 Sat Jun 9 20:17:30 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
932 * Check in the silc_server_timeout_remote if protocol is active
933 and make sure that the protocol's final callback is called so
934 that all memory if freed. Affected file silcd/server.c.
936 Sat Jun 9 12:51:27 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
938 * silc_server_whois_send_reply crashed the server if the nickname
939 was 127 characters long. Affected file silcd/command.c.
941 Thu Jun 7 16:29:56 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
943 * Added sanity check to the silc_server_new_client. If the hostname
944 is provided inside username then check that the provided hostname
945 really is the same as the resolved one. If the hostname was not
946 resolved then check it from the public key. Affected file is
947 silcd/packet_receive.c.
949 * Fixed a fatal bug in Irssi SILC client. Do not send QUIT command
950 if the server disconnected us and the connection is not valid
951 anymore. Affected file irssi/src/silc/core/silc-channels.c.
953 * Moved the silc_client_[chmode|chumode|chumode_char] away from
954 the library to the lib/silcutil/silcutil.[ch].
956 Thu Jun 7 08:57:16 CEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
958 * Close log file after open. Affected file
959 lib/silcutil/silclog.c.
961 * Check whether sock == NULL in silc_client_send_packet and return
962 if it is. Affected file lib/silcclient/silcclient.c.
964 * Check rec->entry == NULL in the Irssi SILC Client before
965 sending the channel message. Affecte file is
966 irssi/src/silc/core/silc-servers.c.
968 Tue Jun 5 08:08:21 CEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
970 * Merged a splitted window bugfix from Irssi CVS tree. The
971 affected file is irssi/src/fe-text/textbuffer-view.c.
973 * Fixed the ME, ACTION and NOTICE printing in Irssi Client.
974 It did not print nickname.
976 * Improved the distributions system a bit.
978 Mon Jun 4 17:57:16 CEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
980 * Merged /WINDOW bugfix from irssi CVS tree. Affected file is
981 irssi/src/fe-text/gui-window.c.
983 * Fixed a fatal bug in Irssi SILC client. Crashed if sent message
984 to in-active server. The affected file is
985 irssi/src/silc/core/client_ops.c.
987 * Resolve the client in USERS command reply if the entry does
988 not have username resolved. The affected file is
989 lib/silcclient/command_reply.c. Also, changed the IDENTIFY
990 command to WHOIS command to really resolve stuff. The USERS
991 is not used any more in any critical section so WHOIS can
992 be used even though it might be slower than IDENTIFY.
994 * Changed the lib/silcutil/silchashtable.h header to ROBODoc
997 Sun Jun 3 14:21:32 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
999 * Changed the protocol API a bit more consistent in the
1000 lib/silccore/silcprotocol.[ch].
1002 * Changed the following headers to ROBODoc format:
1004 lib/silccore/silcpayload.h
1005 lib/silccore/silcprotocol.h
1006 lib/silccore/silcsockconn.h
1008 All core library headers are now formatted.
1010 Sat Jun 2 10:45:09 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1012 * Fixed a bug in Irssi SILC client; do not show that you are
1013 server/router operator if you really are not. Affected file is
1014 irssi/src/silc/core/client_ops.c.
1016 * Renamed silc_command_free_payload to silc_command_payload_free.
1017 Affected file lib/silccore/silccommand.h
1019 * Added silcmath.h to include the prototoypes of various routines
1020 in the lib/silcmath. Removed the old modinv.h, mpbin.h and
1023 * Changed the following headers to ROBODoc format:
1025 lib/silccore/silcchannel.h
1026 lib/silccore/silccommand.h
1027 lib/silccore/silcid.h
1028 lib/silccore/silcidcache.h
1029 lib/silccore/silcmode.h
1030 lib/silccore/silcnotify.h
1031 lib/silccore/silcpacket.h
1032 lib/silcmath/silcmath.h
1034 Fri Jun 1 22:19:37 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1036 * Added checking to the server code not to start the server if
1037 ciphers and stuff are not configured properly. Affected files
1038 silcd/serverconfig.[h] and silcd/server.c.
1040 * Changed the layout of the header files of the public interfaces
1041 in the SILC libraries. The new layout supports ROBODoc
1042 documentation tool (and some others) so that it is easy to create
1043 a library reference manual. All the other headers and source
1044 code must still follow the CodingStyle document. Also source
1045 code must not include these ROBODoc stuffs, only the headers.
1046 Furthermore, all public interface headers must now be named
1047 by using `silc' prefix, example: silcapi.h, silccipher.h.
1048 Some files were renamed due to this. All the other headers
1049 must not be used as public interfaces. I will update the
1050 CodingStyle document later. Changed following headers, so far:
1052 lib/silcclient/silcapi.h
1053 lib/silccore/silcauth.h
1054 lib/silccore/silcprivate.h
1055 lib/silccrypt/silcdh.h
1057 Fri Jun 1 10:28:09 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1061 * Removed silc_client_packet_send_flush from the client library
1062 as it is not needed. Affected file lib/silcclient/client.[ch].
1064 * Added printing of message of unresolved authentication method
1065 to the Irssi SILC client. Added it to the module formats.
1066 Removed the same message from the client library.
1068 Thu May 31 13:57:33 CEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1070 * Added new distribution feature, DISTLABEL. Every distribution
1071 can define own preprocessor label that can be used in the
1072 source code. For example: #ifdef SILC_DIST_CLIENT. Affected
1073 file distributions, acconfig.h.pre and prepare.
1075 Tue May 29 22:16:40 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1077 * Added Makefile.defines_int to include the actual definitions
1078 for Makefile.defines.in. Tested the new distribution system,
1079 created distributions and tested installation.
1081 * Added AWAY message printing to the Irssi SILC client. Added
1082 the messages to the irssi/src/fe-common/silc/module-formats.[ch].
1084 * Added SCONNECT command to call the SILC's CONNECT command.
1085 Cannot use CONNECT directly since Irssi uses that internally.
1086 Affected file irssi/src/silc/core/silc-servers.c.
1088 Added ACTION local command. It is same as ME command but takes
1089 the channel as mandatory argument.
1091 Rewrote some of the Irssi's help files to suite for SILC
1094 Mon May 28 19:05:22 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1096 * Added Makefile.defines[.in] that should for now on be included
1097 in all Makefile.am file in the source tree. That file includes
1098 all common compilation definitions for SILC source tree.
1100 Mon May 28 10:30:51 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1102 * Minor changes to the ./prepare script to change the package
1103 name according the distribution name to the configure.in.
1105 Sun May 27 22:24:57 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1107 * Created new distribution system. Added file `distributions'
1108 that defines all the distributions that can be created out of
1109 the SILC source tree. The ./prepare script now reads that
1110 file to determine how to prepare the distributions. The
1111 first argument to the ./prepare is the name of the distribution
1112 and second is the version of the distribution. If given
1113 without arguments it creates the default (toolkit) distribution
1114 with the default version (defined in ./prepare).
1116 All Makefile.am files that are subject to the distributions
1117 are now named as Makefile.am.pre. These are ./Makefile.am
1118 and lib/Makefile.am. Others may be changed later.
1120 Sun May 27 15:57:17 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1122 * Added invite list, ban list, some key management and connection
1123 error message printing to module formats in the Irssi SILC client.
1125 * Added new silc_client_set_away_message to set the away message
1126 that is back to the person who sent private message. The
1127 affected file lib/silcclient/silcapi.h and the
1128 lib/silcclient/client_prvmsg.c.
1130 Sun May 27 12:39:48 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1132 * Fixed the private message sending in the Irssi SILC client,
1133 added local command KEY to the Irssi SILC client.
1135 Added key management and key agreement message formats to the
1136 irssi/src/fe-common/silc/module-formats.[ch].
1138 Added USERS (alias WHO) printing, server/router operator
1139 indication and LIST command printing to the module formats.
1141 Sat May 26 17:43:42 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1143 * Fixed channel joining notify handling, cumode notify handling
1144 from Irssi SILC client.
1146 * Added SILC specific module-formats to the Irssi SILC client so
1147 that SILC specific message hilighting, colors etc is possible.
1148 Affected file irssi/src/fe-common/silc/module-formats.[ch].
1150 Added channel mode, channel user mode, actions, notices,
1151 whois and whowas printing to the the module-formats.c.
1153 * Fixed a bug in channel deletion in the server. The channel
1154 is not left to the cache even if the channel founder auth mode
1155 is set when there are no users anymore on the channel. Affected
1156 file silcd/server.c.
1158 * The silc_net_localhost now resolves the entire hostname including
1159 the domain name. Affected file lib/silcutil/silcnet.c.
1161 Sat May 26 12:13:37 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1163 * Changed the ask_passphrase client operation to be ascynchronous.
1164 It has now a completion callback and a context that the
1165 application must call after it has got the passphrase from
1166 the user. Affected files lib/silcclient/silcapi.h,
1167 lib/silcclient/protocol.c, lib/silcclient/command.c and
1170 Added SilcAskPassphrase callback that the application calls
1171 to deliver the passphrase to the library.
1173 * Changed the SKE protocol's SilcSKEVerifyCb to be asynchronous.
1174 The public key verification and especially a certificate
1175 verification is asynchronous procedure.
1177 Added new SILC_SKE_STATUS_PENDING status to indicate the
1178 request is pending and a callback will be called to finalize
1181 Added also SILC_SKE_STATUS_PUBLIC_KEY_NOT_PROVIDED status to
1182 indicate that remote end did not send its public key (or
1183 certificate), even though we require it. Added check for this
1184 condition in the SKE. This was a security bug, now fixed.
1186 Defined new SilcSKEVerifyCbCompletion callback that is called
1187 when the verification process is completed.
1189 The affected files lib/silcske/silcske_status.h and
1190 lib/silcske/silcske.[ch].
1192 * Changed the verify_public_key client operation to be async
1193 as well. Defined SilcVerifyPublicKey callback that is used to
1194 indicate the success of the public key verification process.
1196 Changed the server and client to use the new async client
1199 * Changed the Irssi SILC client's internal scheduler to be called
1200 twice as many times as it used to be. As a result the client
1201 should be a bit faster now. Affected file is
1202 irssi/src/silc/core/silc-core.c.
1204 * Added support to Irssi SILC client of asynchronous public key
1205 verification and passphrase inquiry. Affected file is
1206 irssi/src/silc/core/silc-core.c.
1208 Fri May 25 14:38:38 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1210 * Do not say "You have left channel %s" in client library.
1211 Moved it to the application. Affected files are
1212 lib/silcclient/command.c and silc/client_ops.c.
1214 * Fixed silc_client_get_clients. Command context was not
1215 duplicated and was freed memory in the callback. Affected
1216 file lib/silcclient/idlist.c.
1218 * Do not say "you are now talking..." on JOIN command in the
1219 client library. The appliation must handle it.
1221 * Do not say ".. changed topic to" in command reply in the
1222 client libary. The application must handle it.
1224 * Fixed TOPIC command sending in the client library.
1226 * Fixed a memory leak in silc_client_command_free in the file
1227 lib/silcclient/command.c.
1229 Thu May 24 19:08:55 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1231 * Imported a modified version of Irssi client to the source tree.
1232 The Irssi will be used to create a new client called
1233 Irssi SILC. Imported to irssi/.
1235 Added silc_core_init_finish function to the Irssi. Affected
1236 file irssi/configure.in.
1238 A lot changes in the Makefile.ams around the irssi tree.
1240 Tue May 22 22:23:49 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1242 * Do not rehash if the new size is same as the old size of the
1243 hash table, in the silc_hash_table_rehash*. The affected file
1244 lib/silcutil/silchashtable.c.
1246 * Replaced hash_table_del_by_context calls from the server
1247 (when channel->user_list and client->channels) to the
1248 hash_table_del as it is sufficient and faster.
1250 Tue May 22 17:27:16 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1252 * Added silc_hash_table_list, silc_hash_table_get and the
1253 SilcHashTableList structure to provide an alternative way to
1254 traverse the hash table. The affected files are
1255 lib/silcutil/silchashtable.[ch].
1257 * Changed the server's idlist routines to use the hash table
1258 routines to optimize the code.
1260 Mon May 21 21:46:20 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1262 * Replaced the client entry's `channel' list and channel entry's
1263 `user_list' list to hash tables for optimized lookup. Changed
1264 the code to use the hash table interface around the code.
1265 Affected file lib/silcd/idlist.[ch].
1267 * Added `auto_rehash' boolean argument to the function
1268 silc_hash_table_alloc to indicate whether the hash table should
1269 auto-rehash when it thinks is appropriate time. It will
1270 increase the hash table size if the there is twice as much
1271 entries in the table than the size of the table, and will
1272 decrease the size if there are twice as less entries than
1273 the size of the table.
1275 Mon May 21 09:51:11 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1277 * Fixed silc_xxx_get_supported to not crash at some circumstances.
1279 Sun May 20 13:45:58 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1281 * silc_idcache_purge_by_context deletes the entry now by context
1282 as it is supposed to do. Affected file lib/silccore/idcache.c.
1284 * Send the ERR_NO_SUCH_NICK in the WHOIS command reply if the
1285 client is not anymore valid (WHOWAS givens the info) and not
1286 the ERR_NO_SUCH_CLIENT_ID if the nickname still exists.
1288 Sat May 19 16:30:03 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1290 * Removed the `data' and `data_len' arguments from the ID Cache
1291 interfaces and added `name' argument. ID Cache does not handle
1292 anymore the binary data only a names associated with given ID.
1294 * When hashing a Client ID with silc_hash_id the entire ID is
1295 not hashed anymore, instead only the hash of the Client ID is
1296 hashed. This way we can access the Client ID from the cache
1297 with Client ID but with the hash of the ID (which is a hash of
1298 the nickname) as well without any difference in performance.
1300 Added also silc_idcache_find_by_id_one_ext to do one on one
1301 searching when we have the actual ID. Added also function
1302 silc_hash_client_id_compare. The affected files are
1303 lib/silccore/idcache.[ch] and lib/silcutil/silcutil.[ch].
1305 * When hashing the name associated with a ID it is always done
1306 in lowercase. This way we can access the cache without worrying
1307 about case-sensitivity, even though, for example nicknames are
1310 * Fixed a bug in server with channel message sending. It put
1311 wrong ID type as destination ID. The affected file
1312 silcd/packet_send.c.
1314 * silc_idcache_del_by_context now deletes from all hash tables
1315 by context. Affected file lib/silccore/idcache.c.
1317 Fri May 18 17:42:00 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1319 * Changed the client library to use the new ID Cache interface.
1320 Changes around the source tree.
1322 * Added silc_hash_table_rehash_ext to rehash with specific
1323 hash function. Affected file lib/silcutil/silchashtable.[ch].
1325 * Added silc_hash_string_compare to compare two strings in the
1326 hash table. Affected file lib/silcutil/silcutil.[ch].
1328 Fri May 18 11:18:45 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1330 * Added new function silc_idcache_del_by_context into the
1331 lib/silccore/idcache.[ch].
1333 * Changed the server's ID list routines to use the new ID Cache
1334 interface. Changes around the source tree.
1336 Fri May 18 08:35:31 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1338 * Added silc_hash_table_del[_by_context]_ext functions in to the
1339 lib/silcutil/silchashtable.[ch].
1341 Removed silc_hash_table_find_all* routines and added new
1342 silc_hash_table_find_foreach to replace them.
1344 Added silc_hash_table_replace_ext function as extended
1345 replacing function. Separated the simple hash table interface
1346 from the extended hash table interface in the file
1347 lib/silcutil/silchashtable.h.
1349 * Fixed minor bugs and changed it to use some of the new
1350 hash table functions in lib/silccore/idcache.c
1352 Thu May 17 18:15:12 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1354 * Added new function silc_hash_table_find_all to return all keys
1355 in the hash table by the specified key. As the hash table is
1356 collision resistant it also makes it possible to have several
1357 duplicate keys in the hash table. This function may be used to
1358 find all of the keys from the hash.
1360 Added user_context arguments to the SilcHashFunction,
1361 SilcHashCompare and SilcHashDestructor to deliver user specified
1364 Added new fuctions silc_hash_table_find[_all]_ext to do
1365 extended lookup with specified hash and compare functions and
1366 specified user contexts.
1368 Added new function silc_hash_table_add_ext to add the key
1369 with specified hash function and user context.
1371 Added new function silc_hash_table_foreach to traverse all
1372 entrys in the hash table. Added SilcHashForeach callback
1375 Added new function silc_hash_table_del_by_context to delete
1376 the entry only if the context associated with the key matches.
1378 Affected files are lib/silcutil/silchashtable.[ch].
1380 * Removed silc_hash_[server/client/channel]_id and added just
1381 silc_hash_id to the lib/silcutil/silcutil.[ch]. Added also
1382 silc_hash_id_compare to compare two ID's using as the hash table
1383 comparison function. Added also silc_hash_data to hash
1384 binary data and silc_hash_data_compare to compare it.
1386 * Removed silc_idlist_find_client_by_hash as it is not needed
1387 anymore. Affected file silcd/idlist.[ch].
1389 * Rewrote the entire ID Cache system (in lib/silccore/idcache.[ch])
1390 to use internally the SilcHashTable. The new ID Cache is a lot
1391 faster than the old one. Some of the ID Cache interface was also
1392 rewritten and obsolete and stupid functions were removed.
1394 Wed May 16 23:03:30 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1396 * Added entry_count field to the SilcHashTable to keep the number
1397 of the entries in the table. Implemented the function
1398 silc_hash_table_rehash. Added new function
1399 silc_hash_table_count. Affected file lib/silcutil/silchashtable.c.
1401 Fixed a minor bug in silc_hash_table_free.
1403 * Added silc_hash_string, silc_hash_uint, silc_hash_ptr,
1404 silc_hash_client_id, silc_hash_server_id and silc_hash_channel_id
1405 into the lib/silcutil/silcutil.[ch].
1407 Wed May 16 20:02:47 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1409 * Implemented a collision resistant hash table into the
1410 lib/silcutil/silchashtable[ch]. See the header and the source
1411 for the SilcHashTable API.
1413 Tue May 15 22:05:46 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1415 * Merged dotconf version 1.0.2 into lib/dotconf.
1417 Sun May 13 19:32:09 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1419 * Do not compile anything in lib/silcsim/* if the SIM support
1420 is not enabled. The tree should now compile without problems
1423 Thu May 10 22:49:51 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1425 * Compiled the SILC under cygwin. Compiled and tested briefly
1426 without problems. More tests needed. The SIMs didn't compile
1429 * Added various #ifdef HAVE_* stuff to lib/silccrypt/silrng.c.
1431 * Fixed possible crash in silc_get_username in the
1432 lib/silcutil/silcutil.c.
1434 Tue May 8 09:04:03 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1436 * Fixed a va_arg in silc/client_ops.c.
1438 * Oops, RC5 routines were named AES and caused some problems
1439 when not using SIM's. Affected file lib/silccrypt/rc5.c.
1441 Sun May 6 13:59:48 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1443 * Added new SilcIDIP structure into the lib/silccore/id.h and
1444 replaced the old `ip' fields from all SILC ID's to that type.
1445 This is a step towards IPv6 support.
1447 The silc_id_get_len takes now the ID as an extra argument.
1448 The silc_id_id2str, silc_id_str2id and silc_id_dup now supports
1449 both IPv4 and IPv6 based ID's.
1451 The affected files are lib/silccore/id.[ch] and other files
1452 around the tree using these routines.
1454 * Removed the ID length arguments in server from various
1455 silc_server_send_notify_* routines -> they are not needed
1458 Sat May 5 13:56:33 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1460 * Fixed memory leak in silc_encode_pem_file in the file
1461 lib/silcutil/silcutil.c.
1463 Thu May 3 21:23:50 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1465 * Check minor version as well in the SKE. Affected files are
1466 silcd/protocol.c and lib/silcclient/protocol.c.
1468 * Added --identifier option to the server so that an identifier
1469 can be when creating the public key for the server. Affected
1470 file is silcd/silcd.c.
1472 * Fixed minor decoding bug in silc_pkcs_decode_identifier in
1473 lib/silccrypt/silcpkcs.c.
1475 Wed May 2 20:50:49 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1477 * Register default ciphers and stuff when using -C option with
1478 the server. Affected file sildc/silcd.c.
1480 * Put back the servers public key filename format, it is better
1481 than the new one. For now, the client keys are saved with the
1482 new filename format. The affected file silc/client_ops.c.
1484 * Implemented the Cipher API for the rest of the ciphers that
1485 did not implement it or implemented it the wrong way.
1487 Wed May 2 13:31:26 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1489 * Register default ciphers and stuff when using the -S option
1490 in the client. Affected file silc/silc.c. Same also when
1491 creating new key pair with -C option.
1493 Tue May 1 14:18:13 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1495 * Fixed the silc_verify_public_key client operation function to
1496 save the public keys differently. The fingerprint is now
1497 used as filename and not the hostname. This way also the
1498 client keys are saved uniquely and not with hostnames. The
1499 affected file is silc/client_ops.c.
1501 * Trimmed the silc_hash_fingerprint function to remove extra
1502 whitespaces from the end of the fingerprint. The affected
1503 file is lib/silccrypt/silchash.c.
1507 * Added silc_cipher_register_default function to register all
1508 default ciphers. It can be used when configuration files
1509 does not exist and the application does not want any specific
1510 ciphers in any specific order.
1512 The SilcDList is now used as silc_cipher_list dynamically
1513 allocated cipher list. Removed the static list all together
1514 and now all ciphers must be allocated to the dynamic list.
1515 The silc_cipher_alloc routine was changed to check only the
1518 All silc_cipher_* routines that used to return int returns
1521 The affected files lib/silccrypt/silccrypt.[ch].
1523 * The same thing was done to silc_hash_* as for silc_cipher_*
1524 routines. Affected files lib/silccrypt/silchash.[ch].
1526 * The same thing was done to silc_pkcs_* as for silc_cipher_*
1527 routines. Affected files lib/silccrypt/silcpkcs.[ch].
1528 Added also silc_pkcs_[un]register[_default] functions.
1529 Removed the data_context from the PKCS API.
1531 * Added silc_hmac_register_default function to register default
1532 hmacs. Affected files lib/silccrypt/silchmac.[ch]. Added also
1533 SILC_ALL_HMACS macro that can be used with silc_hmac_unregister
1534 to unregister all hmacs at once.
1536 * Register the default ciphers, hash functions, PKCSs and HMACs
1537 if client's configuration file does not exist. The affected
1540 * The client did not load the hash functions from the SIM
1541 modules at all. Added support for this. Affected file is
1542 silc/clientconfig.c.
1544 * When decoding public key with silc_pkcs_public_key_decode, check
1545 the supported algorithm only if PKCS are registered. Affected
1546 file lib/silccrypt/silcpkcs.c. The same was done with the
1547 silc_pkcs_private_key_decode.
1549 * Fixed the SILC List routines to keep the list always in order.
1550 It used to change the list's order when traversing the list but
1551 not it preserves the order. Affected file lib/trq/silclist.h.
1553 Mon Apr 30 17:29:03 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1555 * Added the client library to use the SilcSocketConnection's
1556 reference counter (by silc_socket_dup) to prevent the bug that
1557 the socket object may be freed underneath async operation.
1559 * The name resolv library checking fixes in the configure.in.pre.
1562 * Created new version of the protocol drafts for future
1563 development. The -03 drafts are the ones that will be changed
1564 in the trunk now and the -02 will remain as they are.
1566 * Send list of CUMODE notifys to the router when announcing
1567 the channel users to the router. Affected file silcd/server.c.
1568 If the router receiving channel founder CUMODE for a channel
1569 that already has channel founder it will send CUMODE notify
1570 to the sender to remove the channel founder rights from the
1571 announced client. Affected file silcd/packet_receive.c.
1573 * The CUMODE notify may now use Server ID as well as the entity
1574 who changes the mode. Updated protocool specs.
1576 * Updated INSTALL and README files.
1578 Sun Apr 29 23:17:50 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1580 * New web pages in the http://silc.pspt.fi. The pages was
1585 Sun Apr 29 13:33:41 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1587 * Implemented the [DenyConnectin] config section in the server.
1588 Added silc_server_config_denied_conn to check whether incoming
1589 connection is denied. Affected file silcd/serverconfig.[ch].
1591 * Do not check the ports when checking the incoming configuration
1592 data if the port is 0, meaning any. Affected file is
1593 silcd/serverconfig.c.
1595 Fri Apr 20 18:58:43 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1597 * Fixed buffer overflow in silc_string_compare in the file
1598 lib/silcutil/silcutil.c.
1600 * Fixed double free in silc_server_command_leave in the file
1603 Fri Apr 20 14:00:11 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1605 * Fixed the version checking in the server. Affected file is
1608 Thu Apr 19 19:52:46 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1610 * Fixed the configuration data fetching when accepting new
1611 connections in the server. Affected file silcd/server.c.
1613 Thu Apr 19 11:40:20 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1615 * Added `sender_entry' argument to the function
1616 silc_server_packet_relay_to_channel so that we can check
1617 whether some destination actually belongs to the same route
1618 the sender belongs (ie, we must not resend the packet to the
1619 sender). Affected file silcd/packet_send.[ch].
1621 * Added `servername' field to the SilcClientEntry in the server
1622 to hold the name of the server where client is from. Affected
1623 file is silcd/idlist.h.
1625 Wed Apr 18 22:19:03 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1627 * Moved the channel message encrypting in the router betwen
1628 router connections from silc_server_channel_message to the
1629 silc_server_packet_relay_to_channel since we want to check
1630 whether we have anybody channel before encrypting anything.
1631 Affected files silcd/packet_[receive/send].c.
1633 Tue Apr 17 21:18:19 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1635 * Fixed the [AdminConnection] server config section to support
1636 multiple entries. Affected file silcd/serverconfig.c.
1638 * Added support into the server to check the validity of the
1639 incoming connection before executing any KE or authentication
1642 * The connection configuration is now saved to the KE and
1643 connection auth protocol contexts and not fetched anymore in
1644 the protocol. Affected files silcd/server.c, silcd/protocol.[ch].
1646 * The local hosts listenning address and port is also resolved
1647 now when starting the server. We want to have the socket object
1648 to include the real address and port for the listener. Added
1649 new function silc_net_check_local_by_sock into the files
1650 lib/silcutil/silcnet.[ch].
1652 * Fixed a broadcast bug in server -> do not broadcast if we
1655 * Fixed a routing bug. Do not route broadcast packets ever.
1656 Broadcast packets must be processed always and not routed since
1657 they may be destined to some other host than yourself and thus
1658 would get routed without no good reason. Affected file is
1661 * Added function silc_server_config_is_primary_route to check
1662 whether primary router connection has been configured (a router
1663 configuration that we are initiating). If there is not, we
1664 will assume that there is only two routers in the SILC network
1665 and we will use the incoming router connection as our primary
1666 route. Affected files silcd/serverconfig.[ch], silcd/server.c.
1668 * Changed the order of the broadcasting. Broadcast _after_ the
1669 packet has been processed not before. Affected file is
1672 * Fixed a [ClientConnection] parsing bug. The port was never
1673 parsed correctly thus resulting to port 0. Affected file
1674 silcd/serverconfig.c.
1676 * Fixed silc_server_send_notify_args -> it ignored the `broadcast'
1677 argument and did not set the broadcast packet flag. Affected
1678 file silcd/packet_send.c. Fixed same bug in the function
1679 silc_server_send_notify as well.
1681 * If we receive NEW_ID packet for our own ID in the server, ignore
1684 Mon Apr 16 12:10:33 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1688 * Removed the nickname from the Private Message Payload.
1689 Updated the code and the protocol specs.
1691 * Updated protocol specs for submitting to the IETF.
1693 * Tweaked the Random Number Generator a bit. Affected file
1694 lib/silccrypt/silcrng.c. Exported a new function
1695 silc_rng_[global]_add_noise which can be used to add more
1698 Sat Apr 14 16:21:32 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1700 * Do not parse packets with different timeout when protocol
1701 is active -> may cause problem with rekey. Affected file
1704 * When server receives signoff notify it must not create
1705 new channel key if the client is on any channels since the
1706 sender of the signoff notify will create it.
1708 Fri Apr 13 17:12:46 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1710 * Added printing of error messages during SKE protocol from the
1711 failure packet sent by server during SKE. Affected file
1714 * Removed the client's failure_callback handling with timeout
1715 and handle it immediately when received.
1717 * The SKE library returned wrong type in SUCCESS and FAILURE
1718 packets. They must be 32 bit MSB not 16 bit MSB.
1720 Fri Apr 13 00:09:08 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1722 * Ok, rewrote the logic of the re-key and now it seems to work.
1723 I tested it on high traffic with frequent re-keys without
1724 problems. Added hmac_receive (and renamed hmac to hmac_send)
1725 in SilcClientConnection in lib/silcclient/client.h and
1726 in SilcIDListData in silcd/idlist.h. Also, removed the
1727 SilcPacketParserContext's cipher and hmac fields as they are
1728 not needed anymore and actually caused some problems when
1729 the ciphers and hmac's changed underneath the packet parser.
1731 Thu Apr 12 14:42:51 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1733 * If re-key protocol is active then process the incoming packets
1734 synchronously since we must assure that icoming packets encrypted
1735 with the old key is processed before the new keys is set to
1736 use. This is true other packets than for REKEY packets.
1737 Affected file silcd/server.c. The same was done to client library
1738 as well, affected file lib/silcclient/client.c.
1740 Thu Apr 12 12:01:52 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1742 * Fixed bug in client and server to accept the force send if
1743 the packet is send from silc_[server/client]_packet_process
1744 function. Otherwise the packets are never delivered, oops.
1746 Wed Apr 11 22:10:15 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1748 * Disable force sending of packets when REKEY protocol is active.
1749 We must assure that no packet is sent directly when rekey is
1750 performed. All packets must be sent through packet queue.
1751 Added macro SILC_SERVER_IS_REKEY to silcd/server.h and
1752 SILC_CLIENT_IS_REKEY to lib/silcclient/client.h. Affected
1753 function is silc_[server/client]_packet_send_real to check
1756 * Replaced the SIM paths from example config files to
1757 /usr/local/modules. Also, make install creates now
1758 /usr/local/silc/logs directory to hold all the SILC server
1761 Wed Apr 11 16:59:59 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1763 * Made the configure.in.pre work on Solaris. Patch by salo.
1765 * Made all ciphers compatible with non-x86 machines. Defined
1766 CBC mode macros into lib/silccrypt/ciphers_def.h.
1768 Tue Apr 10 20:32:44 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1770 * Fixed the make install.
1772 Tue Apr 10 16:20:34 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1774 * When MAC computation fails the silc_packet_decrypt returned 0
1775 even though it was supposed to return -1. Fixed this. The
1776 affected file is lib/silccore/silcpacket.c.
1778 * Do not replace the config files in /etc/silc (in make install)
1779 if they already exist. Affected file ./Makefile.am.
1781 * Do not send re-key packets immediately but through packet queue.
1782 Affected file silcd/protocol.c and lib/silcclient/protocol.c.
1784 * Changed silc_net_check_host_by_sock to return FALSE if the
1785 IP/DNS could not be resolved. Though, it returns the IP address
1786 now even if it could not resolve it (but returns also FALSE).
1787 Affected file lib/silcutil/silcnet.[ch].
1789 Mon Apr 9 21:54:44 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1791 * Added silc_pkcs_decode_identifier to decode the public key's
1792 identifier. Affected file lib/silccrypt/silpkcs.[ch].
1793 Added also silc_pkcs_free_identifier. Added also new context
1794 SilcPublicKeyIdentifier.
1796 * Added -S option to the silc client. It is used to dump the
1797 contents of the specified public key file.
1799 * Changed the PKCS api to return the public key length when
1800 setting the public key.
1802 * Fixed a fatal bug in the public and private key file loading.
1803 Affected file lib/silccrypt/silcpkcs.c.
1805 * Execute the packet parsing for client with zero (0) timeout
1806 if the protocol is active. Affected file silcd/server.c.
1808 Sun Apr 8 19:30:56 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1810 * Made the key generation options to the silcd program. Added
1811 -C option, equivalent to client's option.
1813 * Added new [ServerKeys] config section to the server. It
1814 configures the server's public and private key.
1816 * Defined generic Public Key Payload into the protocol
1817 specification to send specific type of public keys and
1820 * Defined new command SILC_COMMAND_GETKEY to fetch a client's
1821 public key or certificate.
1823 * Implemented the GETKEY command to the server and to the
1824 client library and on user interface.
1826 Sun Apr 8 01:37:21 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1828 * Made preliminary `make install' work.
1830 Thu Apr 5 17:42:30 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1832 * Added SilcServerRekey context into silcd/idlist.h.
1834 * Added the PFS support as defined in the specification to the
1835 SKE protocol. Affected files lib/silcske/*.c.
1837 * Added `ske_group' field to the SilcServerRekey context to hold
1838 the number of the SKE group that is used with PFS in re-key.
1839 Affected file silcd/idlist.h.
1841 * Added PFS re-key support to the server. Affected file is
1844 * Added silc_protocol_cancel to cancel execution of the next
1845 state of the protocol. Affected file is
1846 lib/silccore/silcprotocol.[ch].
1848 * Added the re-key support with and without PFS to the client
1849 library. Re-key is performed once in an hour, by default.
1851 Added new protocol type SILC_PROTOCOL_CLIENT_REKEY.
1852 Added silc_client_rekey_callback and silc_client_rekey_final.
1853 Affected files are lib/silcclient/protocol.[ch] and
1854 lib/silcclient/client.[ch].
1856 * Removed the `hmac_key' and `hmac_key_len' fields from the
1857 SilcClientConnection structure; not needed. Affected file is
1858 lib/silcclient/client.h.
1862 Wed Apr 4 16:32:31 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1864 * Do not ask whether user wants to use the negotiated private key
1865 for private messages, just use it. Affected file is
1866 silc/local_command.c.
1868 * Added `send_enc_key' and `enc_key_len' fields to the
1869 SilcIDListData structure since they are needed in the re-key
1870 phase. Affected file is silcd/idlist.[ch].
1872 * Implemented the simple re-key protocol into the server.
1873 Affected files silcd/server.c and silcd/protocol.[ch]. The
1874 re-key will be performed once in an hour, by default.
1876 Added new protocol type SILC_PROTOCOL_SERVER_REKEY.
1877 Added silc_server_rekey, silc_server_rekey_callback and
1878 silc_server_rekey_final.
1880 * Removed Tunneled flag from the protocol. Updated the code
1881 and the specifications.
1883 * Adde `pfs' field to the SilcIDListData to indicate whether
1884 the PFS is to be performed in the re-key. Affected file is
1887 Tue Apr 3 21:52:42 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1889 * Defined uint8, int8, uint16, int16, uint32, int32, uint64 and
1890 int64 of at least the xintXX size. If void * is less that 4
1891 bytes uint32 * will be used. Defined bool as boolean.
1893 * Changed _ALL_ unsigned long and unsigned int to uint32,
1894 unsgined short to uint16 in the source tree.
1896 * Fixed a fatal bug in silc_server_remove_clients_by_server. Do
1897 not handle clients that has entry->data.registered == FALSE.
1898 They are not in the network anymore. Affected file is
1901 Tue Apr 3 16:39:19 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1903 * Implemented the sending of the SERVER_SIGNOFF notify in the
1904 server. Affected file is silcd/server.c.
1906 * Added silc_server_send_notify_args into silcd/packet_send.[ch].
1907 Added also silc_notify_payload_encode_args into the
1908 lib/silccore/silcnotify.[ch].
1910 * Implemented ther SERVER_SIGNOFF notify handling in the server.
1911 Affected file silcd/packet_receive.c.
1913 * Implemented the SERVER_SIGNOFF notify handling in the client
1914 library. Affected file lib/silcclient/client_notify.c. Also,
1915 implemnted the printing of the SERVER_SIGNOFF info to the
1916 application. Affected file silc/client_ops.c.
1918 * The silc_idlist_del_server now returns TRUE or FALSE to indicate
1919 if the deleting was successful. Affected file silcd/idlist.[ch].
1921 * Added support for public key authentication in the connection
1922 authentication protocol in the client library. Affected file
1923 lib/silcclient/protocol.c.
1925 * Changed the server's silc_idlist_get_clients_by_* interface
1926 to support already allocated array so that new entries may be
1927 added to pre-allocated array. Affected file silcd/idlist.[ch].
1928 This fixes some bugs with WHOIS, WHOWAS and IDENTIFY commands
1929 and command replies.
1931 * All command reply functions in the server now calls the
1932 pending command callback even if error occured. This way the
1933 error will be delivered to the client as well. Affected files
1934 silcd/command.c and silcd/command_reply.c.
1936 * Fixed INFO command to return local server's info if no server
1937 was provided. Affected file lib/silcclient/command.c.
1939 * Removed RESTART command for good. Updated the code and the
1942 * Rewrote parts of the task system. It is a bit simpler now.
1943 Removed unsued task priorities. The affected files are
1944 lib/silcutil/silctask.[ch].
1946 Mon Apr 2 20:02:33 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1948 * Moved the USERS printing from the library to the application.
1949 Affected files lib/silcclient/command.c and silc/client_ops.c.
1951 Mon Apr 2 13:13:23 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1955 * Added channel key re-key support. The re-key is perfomed
1956 only by the router and is done once in an hour. Added `rekey'
1957 field to the SilcChannelEntry in the server. Affected files
1958 silcd/server.c and silcd/idlist.h.
1960 * Added silc_task_unregister_by_context into the file
1961 lib/silcutil/silctask.[ch].
1963 Sun Apr 1 19:49:34 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1965 * Added SILC_UMODE_GONE mode to indicate when the client is not
1966 present in the SILC network. Added also support to the local
1967 command AWAY that will set this mode. Added support of showing
1968 "xxx is gone" in WHOIS command. The USERS command shows the
1969 gone status as well.
1971 * Fixed setting server and router operator privileges in the
1972 server's UMODE command. Affected file silcd/command.c.
1974 * Merged the SKE KE1 and KE2 payloads into one payload. The
1975 new KE payload is equivalent to the old KE2 payload.
1977 Cleaned up the SKE Start Payload parsing. It now uses the
1978 simple buffer unformatting to do the parsing. A lot faster
1981 Added new Mutual Authentication flag (SILC_SKE_SP_FLAG_MUTUAL)
1982 to the SKE that is used to indicate whether both of the SKE
1983 parties should perform authentication. By default only the
1984 responder performs authentication. By setting this flag also
1985 the initiator must do authentication. By default it is unset
1986 since in normal SKE case, client to server connection, only
1987 the responder should do authentication. When doing SKE between
1988 two clients both should perform authentication. Updated the
1989 code and the protocol specs.
1991 * A little fix to IDENTIFY command in the server. Search the
1992 client first by hash not nickname. Affected file is
1995 * Fixed the silc_client_close_connection to support closing
1996 the client to client connections wihtout deleting too much
1997 data. Affected file lib/silcclient/client.c.
1999 * Fixed a fatal bug in server and client; if KE1 or KE2 packets
2000 are received if protocol used to be active but is not anymore
2001 the application would crash due to NULL pointer dereference.
2002 Affected files silcd/server.c and lib/silcclient/client.c.
2004 * Added `hash' field to the SilcClientConnection to include
2005 the hash function negotiated in the SKE protocol.
2007 * Added new channel mode SILC_CMODE_FOUNDER_AUTH that is used
2008 to set the channel founder authentication data. A client can
2009 claim the founder rights later by providing the authentication
2010 data to the CUMODE command using SILC_CUMODE_FOUNDER mode.
2011 This way the channel founder can regain the channel founder
2012 privileges even it is left the channel. This works only on
2013 local server and the client must be connected to the same
2014 server to be able to regain the founder rights. Updated the
2015 protocol specs accordingly.
2017 Added support to the CMODE command in the client to set the
2018 founder auth data. Read the README to see how to set it.
2020 Added support to the CUMODE command to claim the founder
2021 rights. Read the README to see how to do it.
2023 Added support for the founder authentication to the Channel
2024 Entry in the server. Affected file silcd/idlist.h.
2026 Added support for the SILC_CMODE_FOUNDER_AUTH mode in the
2027 server's CMODE command. Affected file silcd/command.c.
2029 * Added the following new functions into lib/silccore/silcauth.[ch]:
2030 silc_auth_get_method and silc_auth_get_data.
2032 * The server now saves the remote hosts public key to the
2033 SilcIDListData pointer. Affected file silcd/protocol.c.
2035 * The normal server now does not remove the channel entry from
2036 the cache if the founder authentication data is set. It used
2037 to remove it if the founder was the last one on the channel on
2038 the server and left the channel. The auth data is saved and
2039 if the channel is re-joined later the old entry is used with
2040 the old auth data. Affected files silcd/command_reply.c and
2043 * Removed the `pkcs' field from the SilcIDListData structure
2044 in the server; it is not used. Affected file silcd/idlist.h.
2046 Sat Mar 31 15:38:36 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2048 * Fixed packet processing on slow links. Partial packets were
2049 never re-processed because the incoming data buffer was cleared
2050 by the application. Application must not directly clear the
2051 sock->inbuf, the packet processing routines handle it. Fixed
2052 this in client library and in server.
2054 Fri Mar 30 16:35:27 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2056 * Fixed the WHOIS and IDENTIFY send reply function to really
2057 check whether to send list or just one entry. Affected file
2060 * Cleaned up the LEAVE command's channel key distribution. The
2061 affected file silcd/command.c.
2063 * Changed CMODE_CHANGE's <Client ID> to <ID Payload> as server
2064 can enforce the channel mode as well. In that case the ID
2065 includes the ID of the server. The code now enforces the
2066 mode change if the router have different mode than the server.
2068 * The notify client operation with CMODE_CHANGE notify can now
2069 return NULL client_entry pointer if the CMODE was not changed
2070 by client. Application must check for this.
2072 * Added <Server ID> argument to INFO command to support server
2073 info fetching by Server ID.
2075 * Added silc_server_announce_get_channel_users to get assembled
2076 packets of channel users of the specified channel. Affected
2077 file silcd/server.[ch].
2079 * Fixed bug in CHANNEL_CHANGE notify in the server. The new ID
2080 was freed underneath the ID Cache.
2082 * Re-announce clients when the server received CHANNEL_CHANGE
2083 notify from the router. Affected file silcd/packet_send.c.
2085 Thu Mar 29 19:10:28 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2087 * Fixed a fatal bug when client does /join 1 2 3 4 5 6 the server
2088 crashed since it did not handle the fact that there is no cipher
2089 called "3" and didn't check the error condition. Now fixed.
2091 * Added SILC_MESSAGE_FLAG_REQUEST message flag as generic request
2092 flag. It can be used to send message requests.
2094 Thu Mar 29 12:26:25 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2096 * Implemented the RESTART command in the client.
2098 * Added SILC_MESSAGE_FLAG_NOTICE message flag for informational
2099 notice type messages. Added notice printing to the user
2102 * The channel keys are not re-generated if the channel's mode
2103 is PRIVKEY, ie private key on the channel exists. Affected
2104 files silcd/server.c and silcd/command.c.
2106 * Fixed a little bug in channel message delivery when channel
2107 private keys are set in the server. Affected file is
2108 silcd/packet_send.c.
2110 * Changed the setting on channel->on_channel = TRUE from the
2111 silc_client_save_channel_key to the JOIN command reply. The
2112 key payload is not received if the private channel key is set.
2113 Affected file lib/silcclient/command_reply.c and the
2114 lib/silcclient/client_channel.c.
2116 * When the CMODE_CHANGE notify is sent and the channel private
2117 key mode is removed the channel key must be re-generated in
2118 other cells as well. Added this support for the router in the
2119 silcd/packet_receive.c.
2121 * Added new local command NOTICE to send notice message on
2122 channel. Affected file silc/local_command.[ch].
2124 Wed Mar 28 23:55:54 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2126 * Added new local command ME to the client. It is used to send
2127 message to a channel with SILC_MESSAGE_FLAG_ACTION to indicate
2128 some action. Affected file silc/local_command.[ch].
2130 * Changed channel_message and private_message client operations
2131 to deliver the message flags to the application. Added also
2132 the `flags' arguments to the silc_client_send_channel_message
2133 and silc_client_send_private_message functions. Affected file
2136 Wed Mar 28 20:50:47 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2138 * Redefined the Private Message Payload to support private message
2139 keys and to support the new private message flags. Updated
2140 the protocol specs. Flags makes it possible to have for example
2141 CTCP style messages.
2143 * Added new type SilcPrivateMessagePayload and defined an API
2144 for it in the lib/silcclient/silcprivate.[ch].
2146 * Tested private message private keys successfully. Tested the
2147 private message key set, unset and list commands with the new
2150 * Redefined the Channel Message Payload to include the channel
2151 message flags (equal with private message flags) to support
2152 for example CTCP style messages.
2154 * Defined some of the message (for channel and private message)
2155 flags. Updated the protocol specs and added the flags to the
2156 lib/silccore/silcchannel.h. The type is SilcMessageFlags.
2158 Wed Mar 28 15:52:36 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2160 * Added SilcKeyAgreementStatus type to the key agreement routines
2161 to indicate the current status and error if one occured.
2162 The status types are defined in the lib/silcclient/silcapi.h.
2164 * Added new local command KEY that is used to set and unset private
2165 keys for channels, set and unset private keys for private messages
2166 with remote clients and to send key agreement requests and
2167 negotiate the key agreement protocol with remote client. The
2168 key agreement is supported only to negotiate private message keys,
2169 it currently cannot be used to negotiate private keys for channels,
2170 as it is not convenient for that purpose.
2172 * Fixed a minor pending callback setting bug in the function
2173 silc_client_get_client_by_id_resolve, now the function works.
2174 Affected file lib/silcclient/idlist.c.
2176 * Added function silc_net_get_local_port to get local bound
2177 port by socket. Added to lib/silcutil/silcnet.[ch].
2179 * Added `sockets' and `sockets_count' fields to the SilcClient
2180 object. They hold the sockets of the listenning sockets in
2181 the client. Listenning sockets may be for example the key
2182 agreement server. Affected file lib/silcclient/client.[ch].
2183 Added functions the silc_client_add_socket and the
2184 silc_client_del_socket. They are exported to the application
2187 * Added ~./silc/clientkeys to support other client's public keys.
2189 * Renamed verify_server_key client operation to verify_public_key
2190 and added one argument to indicate the type of the connection
2191 (server, client etc.).
2193 Tue Mar 27 22:22:38 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2195 * Added silc_server_connection_auth_request to handle the
2196 incoming CONNECTION_AUTH_REQUEST packet. Affected file is
2197 silcd/packet_receive.[ch].
2199 * Added silc_server_send_connection_auth_request into the
2200 silcd/packet_send.c to send the connection auth request packet.
2202 * Cleaned up the silcd/protocol.c a bit and fixed some memory
2205 * Fixed the public key authentication in responder side in the
2206 server. The `auth_data' pointer includes the SilcPublicKey
2207 not the path to the public key. Affected file silcd/protocol.c.
2209 * Implemented the public key authentication in the initiator side
2210 in the server. Affected file silcd/protocol.c.
2212 * Removed the [RedirectClient] config section from the server
2213 configuration. Is not needed and I don't want to implement it.
2215 Tue Mar 27 12:49:56 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2217 * Cleaned up the CMODE command in the server. It now works
2218 correctly and supports all the modes defined in the protocol.
2219 Affected file is silcd/command.c.
2221 * Added `hmac_name' field to the SilcChannelEntry in the server
2222 to hold the default HMAC of the channel. It can be set when
2223 creating the channel (with JOIN command). Affected files
2226 * Added <cipher> and <hmac> argument to the CMODE_CHANGE notify
2227 type to indicate the change of the current cipher and hmac
2228 on the channel. Client can safely ignore the <cipher> argument
2229 (if it chooses to do so) since the CHANNEL_KEY packet will
2230 force the channel key change anyway. The <hmac> argument is
2231 important since the client is responsible of setting the new
2232 HMAC and the hmac key into use.
2234 * Fixed the CMODE command in the client library as well.
2236 * Tested CMODE command in router environment successfully.
2238 Mon Mar 26 14:39:48 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2240 * Show the version of the remote client (or server) when connecting
2241 to the server. It is logged to the log file. Affected file
2242 is silcd/protocol.c.
2244 * Fixed the KILLED notify handling in the client library. The
2245 client must be removed from all channels when receiving the
2248 Also, do not remove the client entry when giving the KILL
2249 command but when the KILLED notify is received.
2251 * Removed silc_idlist_find_client_by_nickname from the server.
2252 Not needed anymore. Affected files silcd/idlist.[ch].
2254 * Implemented the CHANNEL_CHANGE notify type handling to the
2255 server. Affected file silcd/server.c.
2259 Mon Mar 26 12:11:14 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2261 * Added silc_server_send_notify_invite to send the INVITE
2262 notify between routers.
2264 * Implemented the INVITE command correctly to the server.
2266 * Implemented the INVITE notify type handling in the server.
2268 * Implemented the INVITE command to the client library and on the
2271 Sun Mar 25 20:27:09 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2273 * Added function silc_server_get_client_resolve to find the
2274 client entry by ID from all ID lists and then resolve it
2275 (using WHOIS) if it cannot be found. Affected file is
2278 Sun Mar 25 13:52:51 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2280 * Implemented the BAN command to the client library.
2282 * The JOIN command in the server now checks the invite list
2285 * Changed the silc_command_reply_payload_encode_va and the
2286 silc_command_payload_encode_va to support that if argument is
2287 NULL it ignores and checks the next argument. Affected file
2288 lib/silccore/silccommand.c.
2290 * Added silc_server_send_notify_ban to send the BAN notify
2291 type between routers.
2293 * Chaned the silc_notify_payload_encode to support that if
2294 argument is NULL it ignores and checks the next argument.
2295 Affected file lib/silccore/silcnotify.c.
2297 * Tested ban lists in router environment successfully.
2299 Sat Mar 24 14:47:25 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2301 * Implemented BAN command to the server, in silcd/command.[ch].
2303 * Removed the BAN and INVITE_LIST modes from the CMODE command
2306 * Added function silc_string_match to regex match two strings.
2307 Affected files lib/silcutil/silcutil.[ch].
2309 Fri Mar 23 22:02:40 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2311 * Redefined parts of the SilcChannelEntry in the server to support
2312 the new ban and invite lists.
2314 Fri Mar 23 16:25:11 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2316 * Redefined the INVITE command. The same command can be used to
2317 invite individuals to the channel but also to manage the invite
2318 list of the channel (to add to and remove from the invite list).
2319 Updated the protocol specs.
2321 * Added new command SILC_COMMAND_BAN that can be used to manage
2322 the ban list of the channel. Updated the protocol specs.
2324 * Removed the channel modes: the SILC_CMODE_BAN and the
2325 SILC_CMODE_INVITE_LIST as they were a bit kludge to be included
2326 in the CMODE command. The equivalent features are now available
2327 using INVITE and BAN commands. Updated the protocol specs.
2329 * Added new SILC_NOTIFY_TYPE_BAN notify type to notify routers
2330 in the network about change in the current ban list. The notify
2331 type is not used by the client.
2333 * Redefined parts of the SILC_NOTIFY_TYPE_INVITE command to
2334 support the invite lists.
2336 Thu Mar 22 22:52:23 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2338 * Added new function silc_string_regexify that converts string
2339 including wildcard characters into regex string that can
2340 be used by the GNU regex library. Added into the file
2341 lib/silcutil/silcutil.[ch].
2343 Added silc_string_regex_combine to combine to regex strings
2344 into one so that they can be used as one regex string by
2345 the GNU regex library. Added into the file
2346 lib/silcutil/silcutil.[ch].
2348 Added silc_string_regex_match to match two strings. It returns
2349 TRUE if the strings match. Added into lib/silcutil/silcutil.[ch].
2351 Thu Mar 22 15:29:42 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2353 * Imported GNU regex to the soruce tree into lib/contrib.
2354 Fixed some compiler warning from the regex.c.
2356 Wed Mar 21 15:27:58 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2358 * Fixed MOTD command in the server to work in router environment.
2360 * Fixed the MOTD command in the client library to support
2361 the server argument in the command.
2363 * Added `nickname_len' argument to the silc_idlist_add_client
2364 in the server, as the `nickname' argument may be binary data
2367 * Added silc_idlist_get_channels to return all channels from
2370 * Implemented LIST command to the server. Affected file is
2373 * Implemented the LIST command to the client library and on the
2376 * Added [<user count>] argument to the LIST command reply.
2377 With private channels the user count is not shown.
2379 * Updated TODO and README.
2381 Tue Mar 20 21:05:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2383 * The client entry's data.registered must be TRUE even with
2384 global client entry on global client list. The data.registered
2385 is used to check whether the client is anymore in the network,
2386 for example with WHOWAS command so it must be valid.
2388 * Fixed the WHOWAS command in the server. It now actually works
2389 in router environment. Added function into silcd/command_reply.c
2390 silc_server_command_reply_whowas_save.
2392 * Added silc_idlist_purge function to the silcd/idlist.c
2393 to periodically purge the ID Cache.
2395 * Fixed INFO command in the server. It works now in router
2396 environment. Added <server name> argument to the INFO command
2397 reply. Updated the protocol specs.
2399 * Fixed minor bug in silc_idcache_purge to not purge if the
2400 expire value is zero.
2402 * Fixed various bugs in WHOIS and IDENTIFY command handling as
2403 they were buggy because of the WHOWAS information.
2405 * Fixed local command MSG to handle the async resolving of
2406 the remote client properly. It used to fail the first MSG.
2407 Affected file silc/local_command.c.
2409 * Added `data_len' field to SilcIDCache context.
2411 Tue Mar 20 16:29:00 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2413 * Update TODO. Todo in commands in the server.
2415 Tue Mar 20 15:45:14 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2417 * Added new notify type SILC_NOTIFY_TYPE_UMODE_CHANGE that is
2418 used by routers as broadcast packet to inform other routers
2419 about the changed user mode.
2421 Implemented the notify handling in the server. Affected file is
2422 silcd/packet_receive.c. Added the function
2423 silc_server_send_notify_umode to the silcd/packet_send.[ch].
2425 * Added new generic Channel Payload and deprecated the New Channel
2426 Payload. The New Channel Payload is now the generic Channel
2429 * Added new argument `mode' to the silc_server_send_new_channel
2430 as it is required in the Channel Payload now.
2432 * Renamed the SilcChannelPayload to SilcChannelMessagePayload
2433 and created a new and real SilChannelPayload to represent the
2434 new generic Channel Payload. Implemented the encode/decode
2435 for Channel Payload. Affected file lib/silccore/silcchannel.[ch].
2437 * Added silc_server_get_client_channel_list to return the list
2438 of channels the client has joined for WHOIS command reply.
2439 Affected file silcd/server.[ch].
2441 * Implemented the channel list sending in the WHOIS command reply
2442 in server and in the client.
2444 Implemented the channel list displaying on the user interface
2445 as well. Affected file silc/client_ops.c.
2447 * Added silc_channel_payload_parse_list to parse list of Channel
2448 Payloads. It returns SilcDList list of SilcChannelPayloads.
2449 Client for example can use this function to parse the list of
2450 channels it receives in the WHOIS command reply. The caller
2451 must free the list by calling silc_channel_payload_list_free.
2452 Affected files lib/silccore/silcchannel.[ch].
2454 Mon Mar 19 21:39:15 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2456 * Added one new argument <user mode> to the WHOIS command reply
2457 to return the mode of the user in SILC. Updated the protocol
2460 Implemented it to the server and client.
2462 Mon Mar 19 18:43:06 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2464 * Fixed the mode printing on the user interface on joining.
2465 Affected file silc/client_ops.c.
2467 * Implemented the UMODE command and user modes in general to the
2468 client library and to the user interface.
2470 * Implemented the UMODE command to the server.
2472 * The server now sends UNKNOWN_COMMAND error status if client sends
2473 unknown command. Affected file silcd/command.c.
2475 * All server commands now handle the command identifier the right
2476 way when sending the command reply to the client. The client can
2477 use to identify the command replies with the identifier.
2479 Mon Mar 19 16:13:07 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2481 * Added silc_server_get_client_route to resolve the route to
2482 the client indicated by the client ID. Affected file is
2485 * Added silc_server_relay_packet as general function to relay
2486 packet to arbitrary destination. This deprecates functions
2487 like _send_private_message_key, _relay_notify etc. Affected
2488 file is silcd/packet_send.[ch].
2490 Removed silc_server_send_key_agreement,
2491 silc_server_send_private_message_key and
2492 silc_server_packet_relay_notify functions from the file
2493 silcd/packet_send.[ch].
2497 * Implemented the SILC_NOTIFY_TYPE_KILLED notify handling in the
2498 server. Affected file silcd/packet_receive.[ch].
2500 * Implemented the KILL command to the client. Implemented the
2501 SILC_NOTIFY_TYPE_KILLED notify handling in the client library.
2502 Affected files lib/silcclient/command[_reply].c and
2503 lib/silcclient/client_notify.c. Implemented the KILL notify
2504 printing in the user inteface.
2506 * Fixed a lot silc_parse_nick memory leaks from the client
2507 library in the file lib/silcclient/command.c.
2509 * Changed the silc_server_send_notify_on_channels's `sender'
2510 argument from SilcSocketConnection to SilcClientEntry to
2511 check the sender as entry and not as connection object and not
2512 to send to the client provided as argument. The affected file
2513 is silcd/packet_send.[ch].
2515 * The notify packets that are destined directly to the client used
2516 to not to be processed by the server. Now changed that and the
2517 server processes all notify packets. After relaying the packet
2518 to the client the notify packet is processed in the server.
2520 * The silc_server_free_client_data now checks whether there is
2521 pending outgoing traffic for the client and purges the data to
2522 the network before removing the client entry.
2524 Sun Mar 18 21:02:47 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2526 * Added SILC_NOTIFY_TYPE_KILLED notify type. It is sent when
2527 an client is killed from the SILC Network. Updated the protocol
2530 Added new function silc_server_send_notify_killed to the
2531 silcd/packet_send.[ch].
2533 * Added function silc_server_packet_relay_notify to relay notify
2534 packets that are destined directly to a client. In this case
2535 the server does not process the notify packets but merely relays
2536 it to the client. Affected file silcd/packet_send.[ch].
2538 Added also silc_server_packet_process_relay_notify to check
2539 whereto relay the notify. Affected file is
2540 silcd/packet_receive.[ch].
2542 * Implemented the KILL command to the server.
2546 * Added the backup schema desgined last fall to the protocol
2547 specs for everyone to see. The specification is in the
2548 *-spec-xx.txt draft and the packet type definitions for the
2549 backup routers is in *-pp-xx.txt draft. Thusly, added also
2550 new packet type SILC_PACKET_CELL_ROUTERS.
2552 * A big security problem in the implementation discovered. The
2553 signoff of an client did not cause new channel key generation
2554 which it of course should've done. The channel keys must be
2555 always re-generated when client leaves (or signoffs) the channel.
2556 The silc_server_remove_from_channels funtion now handles
2557 the channel key re-generation.
2559 * Added `sender' argument to the silc_server_send_notify_on_channels
2560 to not to send the client provided as argument. Affected file
2561 silcd/packet_send.[ch].
2563 Fri Mar 16 15:52:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2565 * Implemented OPER and SILCOPER commands into the server and
2568 * Added silc_auth_verify and silc_auth_verify_data to verify
2569 the authentication directly from the authentication payload.
2570 It supports verifying both passphrase and public key based
2571 authentication. Affected file lib/silccore/silcauth.[ch].
2573 * Added `hash' field to the SilcIDListData structure. It is the
2574 hash negotiated in the SKE protocol. Affected file is
2577 * Slight redesigning of the SilcAuthPayload handling routines.
2578 Do not send SilcPKCS but SilcPublicKey as argument.
2580 * Implemented the public key authentication support to the
2581 serverconfig. The public key is loaded from the provided path
2582 and saved as authentication data to void * pointer. Thus,
2583 changed the unsigned char *auth_data to void *auth_data;
2585 * Fixed SHUTDOWN command to send the reply before the server
2586 is shutdown. :) Affected file silcd/command.c.
2588 * Fixed fatal bug in CONNECT command. The hostname was invalid
2589 memory and server crashed. Affected file silcd/command.c.
2591 * Fixed fatal bug in CLOSE command. The server_entry became
2592 invalid but was referenced later in the command. Affected file
2595 Thu Mar 15 12:46:58 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2597 * Fixed fatal bug in failure packet handling. Server ignored
2598 the failure and thus crashed when it came.
2602 Wed Mar 14 20:37:35 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2604 * Added new SILC_CF_LAG_STRICT command flag that strictly forces
2605 that the command may be executed only once in (about) 2 seconds.
2606 The old SILC_CF_LAG flag is same but allows command bursts up
2607 to five before limiting.
2609 Added the support for CF_LAG and CF_LAG_STRICT flags to the
2610 server code. Various commands now includes the CF_LAG_STRICT
2611 flag to disallow any kind of miss-use of the command.
2613 * Fixed the silc_buffer_unformat to not to allocate any data
2614 if the length of the data is zero. It used to allocate the
2615 length + 1. Affected file lib/silcutil/silcbuffmt.c.
2617 Wed Mar 14 16:10:30 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2619 * Changed the format of AdminConnection configuration section
2620 in the server. Added username of the admin to the format.
2621 Affected files silcd/serverconfig.[ch].
2623 Added silc_server_config_find_admin into silcd/serverconfig.[ch]
2624 to return admin configuration data by host, username and/or
2627 Wed Mar 14 13:18:16 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2629 * Implemented WHOWAS command to the server. Added the functions:
2631 silc_server_command_whowas_parse,
2632 silc_server_command_whowas_send_reply,
2633 silc_server_command_whowas_from_client and
2634 silc_server_command_whowas_from_server
2636 * Added <Client ID> argument to the WHOWAS command reply. Updated
2637 the protocol specs accordingly.
2639 * Implemented WHOWAS command and command_reply to the client
2642 Implemented the WHOWAS printing on the user interface.
2644 Tue Mar 13 22:17:34 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2646 * Added new argument to the WHOWAS command reply, the real name.
2647 It is an optional argument. Updated the protocol specs.
2649 * Added SilcIDCacheDestructor callback that is registered when
2650 the SilcIDCache is allocated. The callback is called when
2651 an cache entry in the ID Cache expires, or is purged from the
2652 cache. Added into lib/silccore/idcache.[ch].
2654 Added silc_idlist_client_destructor to the silcd/idlist.[ch]
2655 to destruct the client entries when the cache entry expires.
2656 Other ID Cache's in server and in the client library ignores
2659 * If the ID Cache entry's `expire' field is zero then the entry
2660 never expires. Added boolean `expire' argument to the
2661 silc_idcache_add function in the lib/silccore/idcache.[ch].
2662 If it is TRUE the default expiry value is used.
2664 * Added silc_server_free_client_data_timeout that is registered
2665 when client disconnects. By default for 5 minutes we preserve
2666 the client entry for history - for WHOWAS command.
2668 Tue Mar 13 13:26:18 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2670 * Added support to the server to enforce that commands are not
2671 executed more than once in 2 seconds. If server receives
2672 commands from client more frequently, timeout is registered
2673 to process the commands. Affected file silcd/command.c.
2674 Added new function silc_server_command_process_timeout.
2676 * Changed NICK_NOTIFY handling in client library to check that
2677 if the client's nickname was changed, so there is no need to
2678 resolve anything from the server.
2680 * Removed error printing from the WHOIS and IDENTIFY commands.
2681 If error occurs then it is ignored silently in the client library.
2682 The application, however, may map the received error to
2683 human readable error string. The application currently maps
2684 the NO_SUCH_NICKNAME error to string.
2686 * Made the command status message public to the application. Moved
2687 them from lib/silcclient/command_reply.c to
2688 lib/silcclient/command_reply.h. The application can map the
2689 received command status to the string with the
2690 silc_client_command_status_message function.
2692 * Added check to the server to check that client's ID is same
2693 as the Source ID in the packet the client sent. They must
2696 Tue Mar 13 12:49:21 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2698 * Added dist-bzip hook to the Makefile.am to make bzip2
2699 compressed distributions.
2701 Mon Mar 12 18:43:38 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2703 * Server now enforces the maximum length for the nickname and
2704 the channel as protocol specification dictates. 128 bytes for
2705 nickname and 256 bytes for channel name.
2707 * Moved the WHOIS printing to the application. The client libary
2708 does not print out the WHOIS information anymore, the application
2709 must do it. Renamed silc_client_command_reply_whois_print to
2710 the silc_client_command_reply_whois_save.
2712 The client's idle time is also sent to the application now, and
2713 the idle is shown on screen.
2715 * Added silc_client_command_reply_identify_save to save the
2716 received IDENTIFY entries.
2718 * Do not check for channel private keys in message sending and
2719 reception if the channel does not have the PRIVKEY mode set.
2720 Affected file lib/silclient/client_channel.c.
2722 Sun Mar 11 20:25:06 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2724 * Fixed a minor bug if WHOIS and IDENTIFY command parsing that
2725 just surfaced after chaning the JOIN procedure.
2727 Sun Mar 11 14:59:05 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2729 * Added silc_client_get_clients_by_list to get client entries
2730 from Client ID list, that is returned for example by JOIN
2731 and USERS command replies. The application should use this
2732 function for example when JOIN command reply is received to
2733 resolve the clients already on the channel (library does not
2734 do that anymore as USERS command reply is not used in the JOIN
2735 procedure anymore). Affected files lib/silcclient/silcapi.h and
2736 lib/silcclient/idlist.c.
2738 * JOIN command reply and USERS command reply returns now SilcBuffer
2739 pointers instead of unsigned char pointers when returning
2740 the client list and mode list.
2742 * Added <Client ID> argument to the JOIN command reply, mainly
2743 for the server to identify for which client the command was
2744 originally sent. Updated protocol specs accordingly.
2746 * Added SilcDlist private_key pointer to the SilcChannelEntry
2747 in the client to support the channel private keys. Affected
2748 file is lib/silcclient/idlist.h.
2750 * Added SilcChannelPrivateKey argument to the function
2751 silc_client_send_channel_message so that application can choose
2752 to use specific private ke if it wants to. If it is not provided,
2753 the normal channel key is used, unless private keys are set.
2754 In this case the first (key that was added first) is used
2755 as the encryption key.
2757 * Implemented the support for channel private key handling.
2758 Implemented the following functions:
2760 silc_client_add_channel_private_key,
2761 silc_client_del_channel_private_keys,
2762 silc_client_del_channel_private_key,
2763 silc_client_list_channel_private_keys and
2764 silc_client_free_channel_private_keys
2766 Affected file lib/silcclient/client_channel.c.
2768 * Added the support for the private keys in the channel message
2769 sending and encryption and in the message reception and
2770 decryption. Affected funtions are
2771 silc_client_send_channel_message and silc_client_channel_message.
2773 Sat Mar 10 21:36:22 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2775 * Added SKE's key verify callback to the client library's
2776 KE protocol context. Affected files lib/silcclient/protocol.[ch].
2778 * Removed the statement that server (or router) must send USERS
2779 command reply when joining to the channel so that the client
2780 knows who are on the channel. Instead, the client list and
2781 client's mode list is now sent in the JOIN command reply to the
2782 client who joined channel. This is better solution.
2784 * Added function silc_server_get_users_on_channel and function
2785 silc_server_save_users_on_channel to the silcd/server.[ch].
2787 * Removed function silc_server_command_send_users from the
2790 * Do not show topic on the client library anymore. The topic is
2791 sent in the command reply notify to the application and the
2792 application must show the topic now.
2794 Sat Mar 10 00:07:37 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2796 * Added client searching by nickname hash into the IDENTIFY and
2797 WHOIS commands in the server as they were clearly missing from
2798 them. Affected file is silcd/command.c.
2800 * Fixed a bug in private message receiving in the client library.
2801 The remote ID was freed and it wasn't supposed, now it is
2804 Fri Mar 9 12:40:42 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2806 * Minor fix to the channel payload; allocate the data area, as it
2807 needs to be of specific length.
2809 * If the key agreement port is zero then the operating
2810 system will define the bound port. Affected files are
2811 lib/silcclient/silcapi.h and lib/silcclient/client_keyagr.c.
2813 * Added new function silc_channel_payload_decrypt into the file
2814 lib/silccore/silcchannel.[ch].
2816 * Moved the channel message etc, check from silc_packet_decrypt
2817 to applications. The library calls now a generic
2818 SilcPacketCheckDecrypt callback which is to return TRUE or FALSE
2819 when the packet is either normal or special. This was done to
2820 allow more wide range of checking that was not allowed when
2821 the code was in library. Now applications can do virtually any
2822 checks to the packet and return to the library the decision how
2823 the packet should be processed. Affected files are
2824 lib/silccore/silcpacket.[ch].
2826 Added silc_server_packet_decrypt_check to the server and
2827 silc_client_packet_decrypt_check to the client library.
2829 * Added silc_server_packet_send_srcdest into silcd/packet_send.[ch]
2830 to send with specified source and destination information.
2832 * Channel message delivery between routers was broken after the
2833 channel key distribution was fixed earlier. The channel key
2834 was used be to distributed to other routers as well which is not
2835 allowed by the protocol. Now this is fixed and channel keys
2836 really are cell specific and the channel message delivery between
2837 routers comply with the protocol specification.
2839 * Fixed various commands in server to check also the global list
2840 for the channel entry and not just the local list. The affected
2841 file silcd/command.c.
2843 Thu Mar 8 21:39:03 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2845 * Added assert()s to buffer formatting and unformatting routines
2846 to assert (if --enable-debug) when error occurs. Affected
2847 file: lib/silcutil/silcbuffmt.c.
2849 * Changed to auto-reconnect to check whether the remote host is
2850 router and register the re-connect timeout if it is. It used
2851 to check that whether we are normal server, but router must do
2852 auto-reconnect with another router as well. Affected file
2855 * Removed the [<key len>] option from CMODE command as the cipher
2856 name decides the key length, nowadays. See the defined ciphers
2857 from the protocol specification.
2859 * Added [<hmac>] option to the CMODE command to define the HMAC
2860 for the channel. Added SILC_CMODE_HMAC channel mode.
2862 * Added [<hmac>] option for the JOIN command so that user can
2863 select which HMAC is used to compute the MACs of the channel
2866 * Added Hmac field to the Channel Message Payload. The integrity
2867 of plaintext channel messages are now protected by computing
2868 MAC of the message and attaching the MAC to the payload. The
2869 MAC is encrypted. Now, it is clear that this causes some
2870 overhead to the size of the packet but rationale for this is that
2871 now the receiver can verify whether the channel message decrypted
2872 correctly and also when private keys are set for the channel the
2873 receiver can decrypt the packet with several keys and check from
2874 the MAC which key decrypted the message correctly.
2876 * Added silc_cipher_encrypt and silc_cipher_decrypt into the
2877 lib/silccrypt/silccipher.[ch].
2879 * Added silc_hash_len to return the digest length into the
2880 lib/silcrypt/silchash.[ch].
2882 * Rewrote parts of Silc Channel Payload interface in the
2883 lib/silccore/silcchannel.[ch]. The encode function now also
2884 encrypts the packet and parse function decrypts it.
2886 Wed Mar 7 20:58:50 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2888 * Fixed a minor formatting bug in the SKE's key material processing.
2889 It actually might have processed the keys wrong way resulting
2892 * Redefined the mandatory HMAC algorithms and added new algorithms.
2893 Added hmac-sha1-96 and hmac-md5-96 which are normal hmac-sha1
2894 and hmac-md5 truncated to 96 bits. The mandatory is now
2895 hmac-sha1-96. Rest are optional (including the one that used
2896 to be mandatory). Rationale for this is that the truncated HMAC
2897 length is sufficient from security point of view and can actually
2898 make the attack against the HMAC harder. Also, the truncated
2899 HMAC causes less overhead to the packets. See the RFC2104 for
2902 * Added new [hmac] configuration section. The SKE used to use
2903 the hash names (md5 and sha1) in the SKE proposal as HMCAS which
2904 is of course wrong. The official names that must be proposed in
2905 the SKE are the ones defined in the protocol specification
2906 (hmac-sha1-96 for example). The user can configure any hmac
2907 using any hash function configured in the [hash] section. At
2908 least, the mandatory must be configured.
2910 Rewrote the HMAC interface in lib/silccrypt/silchmac.[ch].
2912 * Added HMAC list to the SKE proposal list. It has now both
2913 hash algorithm list and HMAC list. This makes the protocol
2914 incompatible with previous versions. The SKE now seems to work
2915 the way it is supposed to work, for the first time actually.
2917 * Defined plain Hash algorithms to the protocol specification.
2920 Tue Mar 6 15:36:11 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2922 * Implemented support for key agreement packets into the server.
2923 Added functions silc_server_key_agreement and
2924 silc_server_send_key_agreement. Other than these functions,
2925 server has nothing to do with this packet.
2927 * Added support for private message key packets into the server.
2928 Added functions silc_server_private_message_key and
2929 silc_server_send_private_message_key.
2933 * Changed the silc_[client|server]_protocol_ke_set_keys to be
2934 called in the protocol's final callback instead in the END
2935 protocol state. This makes a little more sense and in the same
2936 time in client we can use the same protocol routines for normal
2937 key exchange and to key agreement packet handling as well.
2939 * Added to both client's and server's KE protocol context the
2940 SilcSKEKeyMaterial pointer to save the key material. We will
2941 bring the key material to the protocol's final callback by doing
2942 this. The final callback must free the key material.
2944 * Added SKE's packet_send callback into client's KE protocol
2945 context so that the caller can choose what packet sending function
2946 is used. This way we can use different packet sending when
2947 doing normal SKE when doing key agreement packet handling (in
2948 the key agreement packet handling we do not want to encrypt
2951 * Implemented the responder side of the key agreement routines
2952 in the client. The client can now bind to specified port and
2953 accept incoming key negotiation. The key material is passed
2954 to the application after the protocol is over.
2956 * Implemented the processing of incoming Key Agreement packet
2957 in the client. Added function silc_client_key_agreement to
2960 * Implemented the intiator side of the key agreement routines
2961 in the client. The client can now initiate key agreement with
2962 another remote client. The key material is passed to the
2963 application after the protocol is over.
2965 * Created client_keyagr.c to include all the key agreement
2968 * Added macro SILC_TASK_CALLBACK_GLOBAL which is equal to the
2969 SILC_TASK_CALLBACK except that it is not static.
2971 * Created client_notify.c and moved the Notify packet handling
2972 from the client.[ch] into that file.
2974 * Created client_prvmsg.c and moved all private message and
2975 private message key routines from the client.[ch] into that file.
2977 * Create client_channel.c and moved all channel message and
2978 channel private key routines from the client.[ch] into that file.
2980 * Changed silc_client_get_client_by_id_resolve to resolve with
2981 WHOIS command instead of IDENTIFY command, in the file
2982 lib/silclient/idlist.c.
2984 Mon Mar 5 18:39:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2986 * Implemented the SKE's responder side to the Client library.
2988 * When FAILURE is received to the protocol do not trust it
2989 blindly. Register a timeout to wait whether the remote closes
2990 the connection as it should do it, only after that process the
2991 actual failure. This was changed to both client and server.
2993 * Added client_internal.h to include some of the structures
2994 there instead of client.h in lib/silcclient/.
2996 * Added function silc_task_unregister_by_callback to unregister
2997 timeouts by the callback function.
2999 Sat Mar 3 19:15:43 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3001 * Some "Incomplete WHOIS info" errors has been appearing on the
3002 log files. Took away the entry->userinfo check from WHOIS
3003 reply sending. The entry->userinfo is now " " if client did not
3004 provide one. I thought this was fixed earlier but something
3005 is wrong still. Let's see if the error still appears.
3007 Wed Feb 28 20:56:29 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3009 * Fixed a minor bug in the login when the channel key is
3010 re-generated in the server. It used to generate the key in
3011 wrong order and thus caused problems in the channel traffic.
3013 * Fixed a minor bug in channel key distsribution after
3014 KICK command. The key was not sent to the router even though
3017 Tue Feb 27 20:24:25 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3019 * Added silc_ske_process_key_material_data as generic routine
3020 to process any key material as the SILC protocol dictates. The
3021 function is used by the actual SKE library but can be used by
3022 applications as well. This relates to the private message keys
3023 and the channel private keys since they must be processed the
3024 same way the normal SILC session keys. The protocol dictates
3025 this. Affected files: lib/silcske/silcske.[ch].
3027 Added also silc_ske_free_key_material to free the
3028 SilcSKEKeyMaterial structure.
3030 * Defined silc_cipher_set_key function to set the key for
3031 cipher without using the object's method function. The affected
3032 files: lib/silccrypt/silccipher.[ch].
3034 * Implemented silc silc_client_add_private_message_key,
3035 silc_client_add_private_message_key_ske,
3036 silc_client_del_private_message_key,
3037 silc_client_list_private_message_keys and
3038 silc_client_free_private_message_keys functions in the
3041 Added functions silc_client_send_private_message_key to send
3042 the Private Message Key payload and silc_client_private_message_key
3043 to handle incoming Private Message Key payload.
3045 * Added Cipher field to the Private Message Key payload to set
3046 the cipher to be used. If ignored, the default cipher defined
3047 in the SILC protocol (aes-256-cbc) is used.
3049 Tue Feb 27 13:30:52 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3051 * Removed lib/silcclient/ops.h file.
3053 Redefined parts of the SILC Client Library API. Created new
3054 file silcapi.h that deprecates the ops.h file and defines the
3055 published Client Library API. Defined also private message key
3056 API and channel private key API into the file.
3058 This is the file that the application must include from the
3059 SILC Client Library. Other files need not be included by
3060 the application anymore.
3062 * Added new key_agreement client operation callback and also
3063 defined the Key Agreement library API for the application.
3065 Tue Feb 27 11:28:31 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3067 * Added new packet type: SILC_PACKET_KEY_AGREEMENT. This packet
3068 is used by clients to request key negotiation between another
3069 client in the SILC network. If the negotiation is started it
3070 is performed using the SKE protocol. The result of the
3071 negotiation, the secret key material, can be used for example
3072 as private message key.
3074 Implemented the Key Agreement payload into the files
3075 lib/silccore/silauth.[ch].
3077 Mon Feb 26 12:13:58 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3079 * Redefined ciphers for the SILC protocol. Added some new ciphers
3080 and defined the key lengths for the algorithms. Changed the
3081 code accordingly. The default key length is now 256 bits.
3083 * Fixed SKE key distribution function silc_ske_process_key_material
3084 when the key length is more than 128 bits. The default key
3085 length in SILC is now 256 bits.
3087 * Added new command status type: SILC_STATUS_ERR_UNKOWN_ALGORITHM
3088 to indicate unsupported algorithm.
3090 * Renamed rijndael.c to aes.c and all functions as well.
3092 * Fixed a long standing channel key setting bug in client library.
3093 Weird that it has never surfaced before.
3095 * Fixed bug in channel deletion. If the entire channel is removed
3096 then it must also delete the references of the channel entry
3097 from the client's channel list as the client's channel entry and
3098 the channel's client entry share same memory.
3100 Sun Feb 25 20:47:29 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3102 * Implemented CONNECT and SHUTDOWN commands in the client.
3104 * Implemented CLOSE command to the client.
3106 * Added the function silc_idlist_find_server_by_name into the
3107 files silcd/idlist.[ch].
3109 Added the function silc_idlist_find_server_by_conn into the
3110 files silcd/idlist.[ch].
3112 Sat Feb 24 23:45:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3114 * DIE command was renamed to SHUTDOWN. Updated the both code
3117 * Defined SILC_UMODE_NONE, SILC_UMODE_SERVER_OPERATOR and
3118 SILC_UMODE_ROUTER_OPERATOR modes into lib/silccore/silcmode.h.
3120 * Implemented CONNECT, CLOSE and SHUTDOWN commands to the server
3123 * Added function silc_server_create_connection function to create
3124 connection to remote router. My server implementation actually
3125 does not allow router to connect to normal server (it expects
3126 that normal server always initiates the connection to the router)
3127 so the CONNECT command is only good for connecting to another
3130 Sat Feb 24 16:03:45 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3132 * Added SILC_NOTIFY_TYPE_KICKED to indicate that the client
3133 or some other client was kicked from the channel.
3135 Implemented the handling of the notify type to both client
3138 Implemented silc_server_send_notify_kicked to send the KICKED
3139 notify. It is used to send it to the server's primary router.
3141 * Implemented the KICK command into server and client.
3143 * Added `query' argument to the silc_idlist_get_client function
3144 to indicate whether to query the client from server or not if
3147 * Added new command status type SILC_STATUS_ERR_NO_CHANNEL_FOPRIV
3148 to indicate that the client is not channel founder.
3152 Sat Feb 24 00:00:55 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3154 * Removed the rng context from SilcPacketContext structure and
3155 changed that the packet routine uses the Global RNG API.
3157 Fri Feb 23 11:22:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3159 * Added support for quit message that client can "leave" on the
3160 channel when it quits the SILC. It is ditributed inside the
3161 SILC_NOTIFY_TYPE_SIGNOFF notify type.
3163 Added silc_server_free_client_data that will take the
3164 signoff message as argument.
3166 * Changed SKE routines to use the silc_pkcs_sign/verify routines.
3168 Thu Feb 22 23:05:36 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3170 * Updated parts of the protocol specification to keep it up
3173 Thu Feb 22 15:08:20 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3175 * Added List flag (SILC_PACKET_FLAG_LIST) to indicate list of
3176 payloads in one packet.
3178 * Deprecated following packet types: NEW_ID_LIST, NEW_CHANNEL_LIST,
3179 NEW_CHANNEL_USER_LIST, SET_MODE and SET_MODE_LIST. List packets
3180 use now the new List flag.
3182 * Also deprecated the following packet types: REPLACE_ID,
3183 NEW_CHANNEL_USER and REMOVE_CHANNEL_USER packet types.
3185 * Added list support for Notify packet in server.
3187 * Added silc_server_send_notify_channel_change to send the
3188 CHANNEL_CHANGE notify type to replace channel ID's. Deprecates
3189 the silc_server_send_replace_id.
3191 * Added silc_server_send_notify_nick_change to send the
3192 NICK_CHANGE notify type. Deprecates the function
3193 silc_server_send_replace_id.
3195 * Added silc_server_send_notify_join to send the JOIN notify type.
3196 Deprecates the function silc_server_send_new_channel_user.
3198 * Added silc_server_send_notify_leave to send LEAVE notify type.
3199 Deprecates the function silc_server_send_remove_channel_user.
3201 * Added silc_server_send_notify_cmode and
3202 silc_server_send_notify_cumode to send CMODE and CUMODE notify
3203 types. Deprecates the silc_server_send_set_mode function.
3205 * Added SERVER_SIGNOFF notify type to indicate that server has
3206 quit. This means that all clients on the channel from that
3207 server will drop. This can be also used when netsplit happens.
3209 Deprecated REMOVE_ID packet type since it is not needed anymore
3212 Added silc_server_send_notify_server_signoff to send the
3213 SERVER_SIGNOFF notify type. Deprecates the function
3214 silc_server_send_remove_id.
3216 Added also silc_server_send_notify_signoff to send the
3217 SIGNOFF notify type.
3219 * Employed the PKCS #1. It is the mandatory way to do RSA in the
3220 SILC protocol from this day on. Changed the protocol
3221 specification as well.
3223 * Added silc_server_send_notify_topic_set to send TOPIC_SET
3224 notify type. It is used between routers to notify about
3225 topic changes on a channel.
3227 * Added silc_id_dup into lib/silccore/id.[ch] to duplicate
3230 * Partly updated the protocol specification to comply with the
3231 changes now made. It is still though a bit outdated.
3233 * The JOIN notify type now takes one extra argument <Channel ID>.
3234 The packet used to be destined to the channel but now the
3235 JOIN type may be sent as list thus it is impossible to
3236 destine it to any specific channel. By adding this argument
3237 it is again possible.
3239 Wed Feb 21 22:39:30 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3241 * Added CREDITS file. The CHANGES and CREDITS file will appear
3242 in the distribution as well.
3244 Wed Feb 21 14:17:04 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3246 * Implemented CMODE_CHANGE, CUMODE_CHANGE and TOPIC_SET notify
3247 types in the server's silcd/packet_receive.c.
3249 * Implemented CMODE and CUMODE to work in router environment.
3251 * Fixed minor encoding and decoding buglet from the
3252 lib/silccore/silcmode.c.
3254 * Fixed buffer overflow from lib/silcclient/command.c in USERS
3257 Wed Feb 21 12:44:00 EET 2001 Mika Boström <bostik@lut.fi>
3259 * Changed all SilcConfigServer* and silc_config_server* to
3260 SilcServerConfig* and silc_server_config*, respectively.
3263 Wed Feb 21 00:10:00 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3265 * Associated the ID (client or server ID) to the Authentication
3266 Payload to avoid any possibility of forging. Updated the
3267 protocol specification and the code accordingly.
3269 Tue Feb 20 14:14:14 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3271 * The RSA key length is now save to the RsaKey context in the
3272 key generation process in lib/silccrypt/rsa.c. The key length
3273 is now used to figure out the maximum size of the block allowed
3274 to be encrypted/signed.
3276 * Added silc_mp_mp2bin_noalloc into lib/silcmath/mpbin.[ch]. It
3277 is equivalent to the silc_mp_mp2bin but does not allocate any
3280 * Changed silc_mp_mp2bin API to take length argument. If it is
3281 non-zero then the buffer is allocated that large. If zero, then
3282 the size is approximated using silc_mp_sizeinbase, which however
3285 * Created Global RNG API which is global RNG that application can
3286 initialize. After initializing, any routine anywhere in the
3287 code (including library) can use RNG without allocating a new
3288 RNG object. This was done to allow this sort of use of the
3289 RNG in code that has no chance to allocate RNG object. All
3290 applications currently allocate this and many routines in the
3291 library use this. Affected file lib/silccrypt/silcrng.[ch].
3293 * Removed the RNG kludge from lib/silcmath/primegen.c and changed
3294 it to use the Global RNG API.
3296 * Defined Authentication Payload into protocol specification that
3297 is used during SILC session to authenticate entities. It is
3298 used for example by client to authenticate itself to the server
3299 to obtain server operator privileges.
3301 Implemented this payload into the lib/silccore/silcauth.[ch].
3302 Implemented also routines for public key based authentication
3303 as the new protocol specification dictates.
3305 Moved definitions of different authentication methods from
3306 lib/silccore/silcprotocol.h into lib/silccore/silcauth.h.
3308 * Added silc_pkcs_encrypt, silc_pkcs_decrypt, silc_pkcs_sign,
3309 silc_pkcs_verify and silc_pkcs_sign_with_hash and
3310 silc_pkcs_verify_with_hash functions into the file
3311 lib/silccrypt/silcpkcs.[ch].
3313 Mon Feb 19 19:59:28 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3315 * The client entry's userinfo pointer must be always valid.
3316 Otherwise the [<unknown>] bug will surface beacuse the WHOIS
3317 will fail since it requires the userinfo. Now, the userinfo
3318 is allocated as "" if actual userinfo does not exist. Actually,
3319 it must exist and it is totally Ok to drop client connections
3320 that does not announce the userinfo. However, we will make
3321 this workaround for now.
3323 * Added silc_net_get_remote_port into lib/silcutil/silcnet.[ch]
3324 to return the remote port by socket.
3326 Mon Feb 19 14:26:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3328 * Changed SILC_SERVER_COMMAND_EXEC_PENDING macro to the name
3329 SILC_SERVER_PENDING_EXEC and added an new macro
3330 SILC_SERVER_PENDING_DESTRUCTOR which is called to free the
3331 data or when error occurs while processing the pending command.
3333 Added new argument `destructor' into silc_server_command_pending
3334 and to the SilcServerCommandPending object. This destructor is
3335 now called after calling the pending callback or if error occurs
3336 immediately. If error occurs the actual pending callback won't
3337 be called at all - only the destructor. The destructor may be
3338 NULL if destructor is not needed.
3340 All this applies for client library code as well. Similar
3341 changes were made there as well for the pending commands.
3343 In the client, the application must now allocate the
3344 SilcClientCommandContext with the silc_client_command_alloc
3347 * Added reference counter to the SilcServerCommandContext. Added
3348 function silc_server_command_alloc and silc_server_command_dup
3351 Same type of functions added to the client library for the same
3354 * Removed the cmd_ident from IDListData away since it is now
3355 global for all connections. It is the command identifier used
3356 in command sending and with pending commands. The affected file
3359 * Added reference counter to the SilcSocketConnection objecet to
3360 indicate the usage count of the object. The object won't be
3361 freed untill the reference counter hits zero. Currently only
3362 server uses this, and client ignores it. The client must be
3363 set to use this too later. The affected files are
3364 lib/silccore/silcsockconn.[ch]. Added also the function
3365 silc_socket_dup to increase the reference counter.
3367 This was mainly added because it is possible that the socket
3368 is removed underneath of pending command or other async
3369 operation. Now it won't be free'd and proper DISCONNECTING
3370 flags, etc. can be set to avoid sending data to connection that
3371 is not valid anymore.
3373 * Added SILC_SET_DISCONNECTING to server.c when EOF is read from
3374 the connection. After that it sets SILC_SET_DISCONNECTED.
3375 It is, however, possible that the socket data is not still freed.
3376 The silc_server_packet_process now checks that data is not
3377 read or written to connection that is DISCONNECTED. The socket
3378 get's freed when the reference counter hits zero.
3380 Mon Feb 19 00:50:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3382 * Changed the client operation API: channel_message operation's
3383 `sender' is now the client entry of the sender, not the nickname
3384 and the `channel' is the channel entry, not the channel name.
3386 In the private_message operation the `sender' is now also the
3387 client entry of the sender not the nickname.
3389 Affected file is lib/silcclient/ops.h and all applications
3390 using the client operations.
3392 Sat Feb 17 22:11:50 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3394 * Moved the calling of ops->connect() from connect_to_server_final
3395 into receive_new_id functin since that is the point when the
3396 client is actually allowed to send traffic to network. The
3397 affected file is lib/silcclient/client.c.
3399 Sat Feb 17 13:15:35 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3401 * When receiving NEW_CHANNEL_LIST, NEW_CHANNEL_USER_LIST,
3402 NEW_ID_LIST and SET_MODE_LIST packets, broadcast the list packet
3403 (if needs broadcasting) instead of broadcasting the packets one
3404 by one which would make a burst in the network traffic.
3406 * Added `broadcast' argument to the functions in silcd/server.[ch]
3407 silc_server_create_new_channel[_with_id] to indicate whether
3408 to send New Channel packet to primary router.
3410 Sat Feb 17 01:06:44 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3412 * Added new function into the silcd/server.[ch] files:
3413 silc_server_create_new_channel_with_id to create new channel with
3414 already existing Channel ID.
3416 * Added new packet type SILC_PACKET_SET_MODE_LIST into the file
3417 lib/silccore/silcpacket.h. This packet is used t send list of
3418 Set Mode payloads inside one packet. Server uses this to set
3419 the modes for the channels and clients on those channels, that it
3420 announced to the router when it connected to it. The protocol
3421 specification has been updated accordingly.
3423 * The silc_server_new_channel did not handle the packet coming
3424 from normal server as it normally does not send that. However,
3425 when it announces its channels it does send it. Implemented
3426 the support for that.
3428 * Added SILC_ID_CHANNEL_COMPARE macro to compare to Channel ID's
3429 into the file lib/silccore/id.h.
3431 Fri Feb 16 23:57:29 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3433 * Fixed memory leaks in the functions silc_idlist_del_client,
3434 silc_idlist_del_channel and silc_idlist_del_server in the file
3435 silcd/idlist.c. All of those leaked like a sieve.
3437 * Fixed some small memory leaks in the client's function
3438 silc_client_notify_by_server.
3440 * Added functions into silcd/server.c: silc_server_announce_clients,
3441 silc_server_announce_channels and silc_server_announce_server.
3442 These functions are used by normal and router server to announce
3443 to its primary router about clients, channels and servers (when
3444 router) that we own. This is done after we've connected to the
3447 These functions effectively implements the following packet types:
3448 SILC_PACKET_NEW_CHANNEL_LIST, SILC_PACKET_NEW_CHANNEL_USER_LIST
3449 and SILC_PACKET_NEW_ID_LIST.
3451 * Added new functions into the silcd/packet_receive.[ch]:
3452 silc_server_new_id_list, silc_server_new_channel_list and
3453 silc_server_new_channel_user_list to handle the incoming
3454 NEW_ID_LIST, NEW_CHANNEL_LIST and NEW_CHANNEL_USER_LIST packets.
3456 * Added support of changing Channel ID in the function
3457 silc_server_replace_id. If the server that announces a channel
3458 to the router already exists in the router (with same name but
3459 with different Channel ID), router is responsible to send
3460 Replace ID packet to the server and force the server to change
3461 the Channel ID to the one router has.
3463 * Added new notify type SILC_NOTIFY_TYPE_CHANNEL_CHANGE to notify
3464 client that the Channel ID has been changed by the router. The
3465 normal server sends this to the client. Client must start using
3466 the new Channel ID as the channel's ID.
3468 Implemented handling of this new type into lib/silcclient/client.c
3469 into the function silc_client_notify_by_server.
3471 * Added new function silc_idlist_replace_channel_id into the files
3472 silcd/idlist.[ch] to replace the Channel ID.
3474 Fri Feb 16 14:14:00 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3476 * Call silc_server_command_identify_check always when processing
3477 the IDENTIFY command in silcd/command.c
3479 Thu Feb 15 20:07:37 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3481 * Added new packet type SILC_PACKET_HEARTBEAT that is used to
3482 send keepalive packets. The packet can be sent by clients,
3483 servers and routers.
3485 Added function silc_socket_set_heartbeat into the file
3486 lib/silccore/silcsockconn.[ch] to set the heartbeat timeout.
3487 If not set, the heartbeat is not performed. The actual
3488 heartbeat is implemented in the low level socket connection
3489 library. However, application is responsible of actually
3492 Added silc_server_send_heartbeat to send the actual heartbeat
3493 packet into silcd/packet_send.[ch]. Server now performs
3494 keepalive with all connections.
3496 * Added silc_task_get_first function into lib/silcutil/silctask.c
3497 to return the timeout task with shortest timeout. There was a bug
3498 in task unregistration that caused problems. TODO has been
3499 updated to include that task system must be rewritten.
3501 * The client library will now resolve the client information when
3502 receiving JOIN notify from server for client that we know but
3503 have incomplete information.
3505 * Rewrote parts of silc_server_remove_from_channels and
3506 silc_server_remove_from_one_channel as they did not remove the
3507 channel in some circumstances even though they should've.
3509 * Encryption problem encountered in server:
3511 The LEAVE command used to send the Channel Key packet to the
3512 router immediately after generating it. However, the code
3513 had earlier sent Remove Channel user packet but not immediately,
3514 ie. it was put to queue. The order of packets in the router
3515 was that Channel Key packet was first and Remove Channel User
3516 packet was second, even though they were encrypted in the
3517 reverse order. For this reason, MAC check failed. Now, this
3518 is fixed by not sending the Channel Key packet immediately but
3519 putting it to queue. However, this is more fundamental problem:
3520 packets that are in queue should actually not be encrypted
3521 because packets that are sent immediately gets encrypted
3522 actually with wrong IV (and thus MAC check fails). So, packets
3523 that are in queue should be encrypted when they are sent to
3524 the wire and not when they put to the queue.
3526 However, the problem is that the current system has not been
3527 designed to work that way. Instead, the packet is encrypted
3528 as soon as possible and left to the queue. The queue is then
3529 just purged into wire. There won't be any fixes for this
3530 any time soon. So, the current semantic for packet sending
3533 o If you send packet to remote host and do not force the send
3534 (the packet will be in queue) then all subsequent packets to the
3535 same remote host must also be put to the queue. Only after the
3536 queue has been purged is it safe again to force the packet
3539 o If you send all packets immediately then it safe to send
3540 any of subsequent packets through the queue, however, after
3541 the first packet is put to queue then any subsequent packets
3542 must also be put to the queue.
3544 Follow these rules and everything works fine.
3546 Thu Feb 15 14:24:32 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3548 * Added new function silc_server_remove_clients_by_server to
3549 remove all client entries from ID list when the server connection
3550 is lost. In this case it is also important to invalidate all
3551 client entires as they hold the invalid server entry. This
3552 fixes fatal bug when server has lost connection and will reconnect
3555 Wed Feb 14 16:03:25 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3557 * Made some sanity checks to silc_server_daemonise like to check
3558 whether the requested user and group actually exists.
3560 * Added sanity check to SKE's silc_ske_responder_finish to check
3561 that the public and private key actually is valid.
3563 * Invalidate the client's nickname when receiving Replace ID
3564 packet and the Client ID is being replaced. This means that the
3565 server will query the nickname if someone needs it (client)
3568 * Sort the ID Cache in client library when the ID Cache data
3569 has changed (needs sorting).
3571 * Do not allow for SILC client to create several connections to
3572 several servers. The client does not support windows right now
3573 and generating multiple connections causes weird behaviour.
3575 Irssi-silc client does support windows and can handle several
3576 connections without problems, see: www.irssi.org and SILC plugin.
3578 * Fixed some places where client was added to the IDList. The
3579 rule of thumb is following (in order to get everything right):
3580 If the client is directly connected local client then the
3581 `connection' argument must be set and `router' argument must be
3582 NULL to silc_idlist_add_client function. If the client is not
3583 directly connected client then the `router' argument must
3584 bet set and the `connection' argument must be NULL to the
3585 silc_idlist_add_client function.
3587 * The funtion silc_server_packet_send_local_channel actually did
3588 not check whether the client was locally connected or not. It
3589 does that now. Fixed a bug related to LEAVE command.
3591 * Fixed Remove Channel User payload parsing bug in server's
3592 silcd/packet_receive.c. Fixed a bug related to LEAVE command.
3594 * The server's silc_server_save_channel_key now checks also the
3595 global ID list for the channel as it might not be in the local
3596 list. Fixed a bug related to LEAVE command.
3598 * Is this the end of the [<unknown>] buglet that has been lurking
3599 around for a long time? A little for loop fix in server's
3600 silc_server_command_whois_parse that is used by both IDENTIFY
3601 and WHOIS command. At least, this was a clear bug and a cause
3602 of one type of [<unknown>] buglet.
3604 * WHOIS and IDENTIFY commands call the function
3605 silc_server_command_[whois/identify]_check function even if
3606 we are not router server.
3608 Tue Feb 13 19:55:59 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3610 * Added --with-gmp configuration option. If set the GMP
3611 is always compiled in the SILC source tree. If not set then
3612 it is checked whether the system has the GMP3 installed. If
3613 it has then the GMP won't be compiled (the system's headers
3614 and library is used), if it doesn't have it then the GMP is
3615 compiled in the SILC source tree.
3617 Mon Feb 12 11:20:32 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3619 * Changed RSA private exponent generation to what PKCS #1
3620 suggests. We try to find the smallest possible d by doing
3621 modinv(e, lcm(phi)) instead of modinv(e, phi). Note: this is
3622 not security fix but optimization.
3624 Sun Feb 11 18:19:51 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3626 * Added new config entry [Identity] to fork the server and run
3627 it as specific user and group. A patch from Bostik.
3629 * Imported Dotconf configuration library into lib/dotconf.
3630 This will be used to create the SILC configuration files later.
3631 It will appear in the distsribution after this commit.
3633 Sat Feb 10 21:13:45 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3635 * A big code auditing weekend happening. Auditing code for
3636 obvious mistakes, bugs and errors. Also, removing any code
3639 Removed files for being obsolete:
3641 o lib/silcutil/silcbuffer.c (the buffer interface is entirely in
3642 inline in the file lib/silcutil/silcbuffer.h)
3644 o lib/silcutil/silcbufutil.c (the header has inline versions)
3646 Changed code to fix possible error conditions:
3648 o The buffer formatting routines now check that the destination
3649 buffer really has enough space to add the data. This applies for
3650 both buffer formatting and unformatting
3651 (lib/silcutil/silcbuffmt.[ch]). Also, the entire buffer
3652 unformatting was changed to accomodate following rules:
3653 XXX_*STRING_ALLOC will allocate space for the data into the pointer
3654 sent to the function while XXX_*STRING will not allocate or copy
3655 the data into the buffer. Instead it sets the pointer from the
3656 buffer into the pointer sent as argument (XXX_*STRING used to
3657 require that the pointer must be allocated already). This change
3658 makes this whole thing a bit more consistent and more optimized
3659 (note that the data returned in the unformatting with XXX_*STRING
3660 must not be freed now). The routines return now -1 on error.
3662 o Tried to find all code that use buffer_format and buffer_unformat
3663 and added return value checking to prevent formatting and
3664 especially unformatting errors and possible subsequent fatal
3667 o Changed ske->x and ske->KEY to mallocated pointers in
3668 lib/silcske/silcske.h. Fixed possible data and memory leak.
3670 o Added return value checking to all *_parse* functions. Fixed
3671 many memory leaks as well.
3673 o Added length argument to silc_id_str2id in lib/silccore/id.[ch]
3674 so that buffer overflows would not happen. All code now also
3675 checks the return value as it can fail.
3677 Mon Feb 5 20:08:30 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3679 * Added reconnection support to server if the normal server looses
3680 its connection to the router (for example if router is rebooted).
3681 The server performs normal reconnection strategy implemented
3682 to the server. Affected file silcd/server.c.
3684 Sun Feb 4 13:18:32 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3686 * Added new packet type SILC_PACKET_SET_MODE that is used to
3687 distribute the information about changed modes (for clients,
3688 channels and clients channel modes) to all routers in the
3689 network. Updated the protocol specification accordingly.
3691 Added functions into silcd/packet_send.c and
3692 silcd/packet_receive.c: silc_server_send_set_mode,
3693 silc_server_set_mode.
3695 Added new files silcmode.[ch] into lib/silccore that implements
3696 the encoding and decoding of Set Mode Payload. Added new type
3697 SilcSetModePayload. Moved the definitions of different modes
3698 from lib/silccore/silcchannel.h into lib/silccore/silcmode.h.
3700 Sat Feb 3 15:44:54 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3702 * Oops, a little mistake in server's connection authentication
3703 protocol. The protocol is not ended with FAILURE but with
3704 SUCCESS if the authentication is Ok. :) Affected file is
3707 * Implemented NICK_CHANGE notify handling in server in the file
3708 silcd/packet_receive.c The NICK_CHANGE notify is distributed to
3709 the local clients on the channel. After the changing nickname
3710 in router environment snhould work and the [<unknown>] nickname
3711 should appear no more.
3713 The silc_server_replace_id function that receives the Replace ID
3714 payload now sends the NICK_CHANGE notify type also in the file
3715 silcd/packet_receive.c
3717 * Changed WHOIS and IDENTIFY command to support the maximum amount
3718 of arguments defined in protocol specs (3328 arguments). This
3719 fixed a bug that caused problems when there were more than three
3722 Fri Feb 2 11:42:56 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3724 * Added extra parameter, command identifier, to the
3725 silc_client_send_command so that explicit command identifier
3728 Changed that ID list routines uses specific command identifier
3729 when sending WHOIS/IDENTIFY requests to the server so that they
3730 can be identified when the reply comes back.
3732 Affected files lib/silcclient/command.[ch],
3733 lib/silcclient/client.c and lib/silcclient/idlist.[ch].
3735 * Added `sender' argument to silc_server_packet_send_to_channel
3736 to indicaet the sender who originally sent the packet to us
3737 that we are now re-sending. Ignored if NULL. Affected file
3738 silcd/packet_send.[ch].
3740 * Added some server statistics support in silcd/server_internal.h
3741 SilcServerStatistics structure and around the server code. Also
3742 send some nice statistics information when client is connecting
3745 Thu Feb 1 23:31:21 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3747 * Fixed channel ID decoding in server's JOIN command reply in
3748 silcd/command_reply.c
3750 * Fixed braodcasting of replace ID payload to not to send it if
3751 we are standalone server in silcd/packet_receive.c.
3753 * Fixed all channel message sending routines to not to send
3754 packets to clients that has router set, since they are routed
3755 separately in the same function earlier. Affects file
3756 silcd/packet_send.c and all channel packet sending functions.
3758 * In USERS reply, res_argv[i] are not allocated, the table
3759 is allocated. Thus changed that free the table, not its
3762 * In server's whois_check and identify_check if the client is
3763 locally connected do not send any WHOIS commands - they are not
3766 Thu Feb 1 21:32:27 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3768 * Fixed some minor bugs in client when sending WHOIS command. The
3769 arguments was in wrong order.
3771 * Removed statis function add_to_channel from server in
3772 silcd/command.c that was previously used with the joining but
3775 * Tested USERS command in router environment successfully with two
3776 routers, two servers and two clients.
3778 Thu Feb 1 00:54:26 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3780 * Reorganized the USERS command and command reply in client library
3781 in lib/silcclient/command.c and lib/silcclient/command_reply.c.
3782 When the command is given by user we register a pending command
3783 callback that will reprocess the command after the reply has been
3784 received from the server. When reprocessing the packet we then
3785 display the information. Thus, the USERS information is displayed
3786 now in the command callback instead of in the command reply
3787 callback. The processing of the command is same as previously
3788 when server has sent the command reply in the JOINing process.
3790 * Added to USERS command in silcd/command_reply.c to join the client,
3791 we didn't use to know about, to the channel after we've created
3792 a client entry for it. Also, for clienet we did know already still
3793 check whether it is on the channel or not and add it if not.
3795 * Removed silc_server_command_join_notify as the function and its
3798 Tue Jan 30 22:39:15 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3800 * Changed the client's pending command handling to the same as the
3801 server's pending command handling. It is also now possible to
3802 execute command reply functions from other command reply
3803 function as the function callbacks for commands and command
3804 replies are one and same. The pending commands are not static
3805 list anymore, it is mallocated SilcDList in lib/silcclient/client.h
3806 in client connection context. Thus, pending commands are server
3807 connection specific as it is convenient.
3809 Changed the function silc_client_command_pending and
3810 silc_client_command_pending_del and added new function
3811 silc_client_command_pending_check. Removed the
3812 SILC_CLIENT_CMD_REPLY_EXEC, and SILC_CLIENT_PENDING_COMMAND_CHECK
3815 * Added cmd_ident, current command identifier, to the client
3816 connection context in lib/silcclient/client.h to keep track on
3817 command identifiers used in command sending. Client's command reply
3818 function handling now supports the mandatory command identifiers.
3820 * Added SILC_CLIENT_COMMAND_EXEC_PENDING macros to all command reply
3821 funtions in client to fully support pending command callbacks.
3823 * NOTE: the name_list in USERS (old NAMES) command is NOT sent anymore
3824 as one of the arguments to the application in the command reply
3827 * NOTE: The FORWARDED flag is depracated. It used to be depracated
3828 before first releasing SILC but came back. Now it is removed again
3829 and should come back nomore. The FORWARDED flag was used only
3830 by the JOINing procedure by forwarding the command packet to router.
3831 Now, the JOINing procedure has been changed to more generic (due
3832 to various router environment issues) and FORWARDED is not needed
3833 anymore for anything. The protocol specification is yet to be
3836 Now, removed silc_server_packet_forward from server and the flag
3837 SILC_PACKET_FORWARDED from lib/silccore/silcpacket.h.
3839 Tue Jan 30 00:05:05 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3841 * Renamed NAMES command to USERS command. The NAMES was named that
3842 due to historical reasons. Now it is renamed. Also, rewrote
3843 parts of the USERS command. The nickname list is not sent anymore
3844 by the server. Only Client ID and mode lists are sent in the USERS
3845 command. Changed this also to the protocol specification.
3847 The client now resolves the names and stuff after it receives
3848 the USERS list from the server when joining to the channel.
3850 * WHOIS and IDENTIFY commands has been changed to support multiple
3851 Client ID's per command. One can now search for multiple users
3852 in the network by sending only one WHOIS or IDENTIFY command.
3853 Changed the code and the protocol specifications.
3855 * Removed silc_server_command_identify_parse and changed that IDENTIFY
3856 uses silc_server_command_whois_parse to parse the request. */
3858 * If normal server, do not parse the WHOIS and IDENTIFY requests
3859 before sending it to the router. Saves some time.
3861 Sun Jan 28 16:19:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3863 * Fixed JOIN command on client library. Wrong number of arguments
3864 used to crash the client.
3866 * Added silc_server_channel_has_global function to check whether
3867 channel has global users or not.
3869 * Added silc_server_channel_has_local function to check whether channel
3870 has locally connected clients on the channel.
3872 * The silc_server_remove_from_one_channel now checks whether the
3873 channel has global users or not after given client was removed from
3874 the channel. It also checks whether the channel has local clients
3875 on the channel anymore. If it does not have then the channel entry
3876 is removed as it is not needed anymore.
3878 * The silc_server_notify now checks on JOIN notify whether the joining
3879 client is one of locally connected or global. If it is global then
3880 the channel has now global users on the channel and that is marked
3881 to the channel entry. Also, it now saves the global client to
3882 global list who is joining and JOINs it to the channel. This is
3883 for normal server, that is.
3885 Changed silc_server_send_notify_on_channel,
3886 silc_server_packet_relay_to_channel and
3887 silc_server_packet_send_to_channel check if we are normal server
3888 and client has router set (ie. global client) do not send the
3889 message to that client, as it is already routed to our router.
3891 * Implemented LEAVE notify type handling in silc_server_notify
3894 * Tested LEAVE command in router environment successfully. Tested
3895 with two routers, two servers and two clients.
3899 * idlist_find_xxx_by_id routines now dumps the ID on the debug mode.
3901 * Implemented SIGNOFF notify type handling in silc_server_notify
3904 * silc_server_remove_id now removes the client entry from all channels
3905 it has joined and thusly sends SIGNOFF notify type.
3907 * Rewrote the NAMES list generation in server by removing two excess
3908 loops. The lists are created now inside one loop.
3910 Sat Jan 27 22:34:56 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3912 * silc_server_remove_channel_user checks now also global list
3913 for channel and client.
3915 * silc_server_new_channel_user checks now both local and global
3916 list for channel and client. Fixed a bug in client id decoding.
3917 Used to decode wrong buffer.
3919 * silc_server_channel_message checks now both local and global
3920 list for channel entry.
3922 * Tested channel joining (hence JOIN) in router environment
3923 successfully. Tested with two routers, two servers and two
3926 * Tested channel message sending in router environment successfully.
3928 Thu Jan 11 03:22:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3930 * Added silc_server_save_channel_key into server.[ch] to save the
3931 received channel key in Channel Key payload processing. It is
3932 also used in JOIN command reply handling.
3934 Equivalent function silc_client_save_channel_key added into
3935 client.[ch] into client library.
3937 * Changed JOIN command reply to send information whether the channel
3938 was created or not (is existing already) and the channel key
3939 payload. Changed protocol specs accordingly.
3941 * Fixed bugs in WHOIS and IDENTIFY command reply sending when
3942 the request was sent by ID and not by nickname. Crashed on
3945 Sat Dec 23 21:55:07 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3947 * Fixed a bug in Client library. IDENTIFY and WHOIS reply functions
3948 now correctly save the received data.
3950 * silc_server_free_sock_user_data now notifies routers in the
3951 network about entities leaving the network.
3953 At the same time implemented functions silc_server_remove_id
3954 and silc_server_send_remove_id to receive and send REMOVE_ID
3955 packets. The packet is used to notify routers in the network
3956 about leaving entities. The ID removed will become invalid in
3959 * Added function silc_idlist_del_server into server. Removes and
3960 free's server entry from ID list.
3962 * silc_server_private_message function now checks, if we are router,
3963 that the destination ID really is valid ID, naturally.
3965 * In router when NEW_ID packet is received (for new client) the
3966 hash of the Client ID is saved in the ID Cache but the
3967 client->nickname is set to NULL, instead of putting the hash
3970 IDENTIFY command now also checks that client->nickname must be
3971 valid. If it is not if will request the data from the server who
3972 owns the client. Added new function
3973 silc_server_command_identify_check.
3975 * Added silc_command_set_command into lib/silccore/silcommand.[ch]
3976 to set the command to already allocated Command Payload.
3978 * Tested private message sending in router environment with two
3979 routers, two servers and two clients. Fixed minor bugs and now
3982 * Fixed segfault from client's NAMES command. Used to crash if
3985 * Forwarded packets must not be routed even if it is not destined
3986 to the receiver. Changed server code comply with this.
3988 Sun Dec 17 14:40:08 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3990 * Added `require_reverse_mapping' boolean value to ServerParams
3991 structure. If TRUE (not default) the server will require that
3992 the connecting host has fully qualified domain name.
3994 If the reverse mapping is not required and hostname could not be
3995 found the IP address is used as hostname.
3997 Sat Dec 16 17:39:54 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3999 * Implemented version string checking to both client and server.
4000 The check is incomplete currently due to the abnormal version
4001 strings used in development version of SILC.
4003 * Changed all command functions in server to use the new
4006 Fri Dec 15 15:55:12 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4008 * Changed char *data to unsigned char *data in ID Cache system to
4009 support binary data as ID Cache data. Changed code to support
4010 binary data in lib/silccore/idcache.c.
4012 * Renamed silc_server_packet_relay_command_reply to
4013 silc_server_command_reply as it is normal packet receiving
4014 function. Rewrote the function to accept command replys for
4015 servers and not only for clients.
4017 * Mark remote router always as registered server if we are connecting
4018 to it. Otherwise, commands sent by the router to us are ignored.
4020 * All ID List find routines now returns the ID Cache Entry pointer
4021 as well if requested.
4023 * WHOIS command works now in router environment, tested with two
4024 routers, two servers and two clients.
4026 * Cleaned up and rewrote IDENTIFY command. IDENTIFY should work now
4027 in router environment (as it is almost equivalent to WHOIS) but
4028 hasn't been tested thoroughly. Added new functions:
4030 silc_server_command_identify_parse
4031 silc_server_command_identify_send_reply
4032 silc_server_command_identify_from_client
4033 silc_server_command_identify_from_server
4035 * Disabled route cache adding because adding two different ID's with
4036 same IP replaces the old cache entry thus giving wrong route.
4037 The entry->router->connection is always the fastest route anyway
4038 so route cache may not be needed. Of course, new routes maybe
4039 established after receiving the ID when the entry->router->connection
4040 might not be anymore the most optimal.
4042 Thu Dec 14 15:55:35 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4044 * Add route cache for received ID for fast routing.
4046 * Added silc_server_packet_route to route received packet on router
4047 that is not destined to us.
4049 * Renamed silc_server_get_route to silc_server_route_get.
4051 * Added id_string and id_string_len fields into SilcServer to
4052 include encoded ServerID for fast comparing without excess
4053 encoding of the ID's.
4055 * Cleaned up WHOIS command on server side. Added following static
4058 silc_server_command_whois_parse
4059 silc_server_command_whois_check
4060 silc_server_command_whois_send_reply
4061 silc_server_command_whois_from_client
4062 silc_server_command_whois_from_server
4064 * Added macro SILC_SERVER_COMMAND_CHECK_ARGC to check mandatory
4065 arguments in command replies. All command functions should be
4066 updated to use this macro.
4068 Sun Dec 10 23:52:00 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4070 * Minor typo fixes on command reply handling on server.
4072 Tue Nov 28 11:05:39 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4074 * Added silc_server_command_add_to_channel internal routine to add
4075 the client to the channel after router has created the channel and
4076 sent command reply to the server.
4078 * Added generic silc_server_send_command to send any command from
4081 * Use static buffer with ID rendering instead of duplicating data.
4083 Mon Nov 27 21:39:40 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4085 * Fixed a channel user mode bug when joining to a channel server gave
4086 everybody channel founder rights, oops.
4088 * We mark ourselves as the router of the incoming server connection
4089 if we are router ourselves. This way we can check in some packet
4090 sending functions whether it is locally connected server. For
4091 incoming router connections we put NULL.
4093 * For router sending packets locally means now always sending the
4094 packet cell wide; to local clients and local servers. For normal
4095 server sending packet locally means sending it to only local
4098 * Fixed the JOIN command to really work in router environment. If the
4099 channel is created it is always created by the router. Router is
4100 also responsible of making the initial joining to the channel,
4101 sending JOIN notify to the sending server and distributing
4102 NEW_CHANNEL and NEW_CHANNEL_USER packets. Hence, if the channel
4103 does not exist server doesn't do anything else but forward the
4104 command to the router which performs everything.
4106 * Added silc_server_send_channel_key function to send the Channel Key
4109 * Added silc_server_create_channel_key to create new channel key. The
4110 channel key is now re-generated everytime someone joins or leaves
4111 a channel, as protocol dictates. Note: channel->key_len is the
4114 Wed Nov 22 22:14:19 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4116 * Splitted server.[ch] finally. Created now packet_send.[ch] and
4117 packet_receive.[ch] to separate packet sending and receiving
4118 routines. The server.[ch] now includes everything else including
4119 actual packet processing (writing and reading data) and other
4122 Renamed silc_server_private_message_send_internal to
4123 silc_server_send_private_message. The routine is still though
4124 used only to relay private messages as server does not send
4125 private messages itself.
4127 Renamed silc_server_new_channel to silc_server_create_new_channel
4128 and added new function sicl_server_new_channel that handles the
4129 incoming New Channel packet. Added also new sending function
4130 silc_server_send_new_channel to send New Channel Payload.
4132 * Added new function silc_server_notify to process incoming notify
4133 packet to the server/router. Server may then relay the notify
4134 to clients if needed.
4136 * Added new function silc_server_new_channel_user to process incoming
4137 New Channel User packet. Router will redistribute the packet and
4138 send JOIN notify to its local clients and locally connected servers
4139 if needed. Normal server will send JOIN notify to its local client
4140 on same channel when received this packet. Added also corresponding
4141 sending function silc_server_send_new_channel_user to sent the
4144 * Added boolean route argument to send_notif_to_channel and
4145 packet_send_to_channel functions to attempt to route the packet
4146 if it is TRUE and send only locally if it is FALSE.
4148 Tue Nov 21 19:49:31 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4150 * silc_server_replace_id now broadcasts the received replace ID
4151 packet if it is not broadcast packet already. The router must
4152 broadcast to inform other routers about changed ID.
4154 * Added backpointer to server's router into SilcServer context in
4155 silcd/server_internal.h.
4157 * Fixed silc_server_packet_broadcast to send correct broadcast
4160 * The channel key is now distributed to the local client as soon
4161 as it is received from the router (in router environment) so that
4162 no other packet may be sent for the channel until client has
4165 * silc_server_remove_channel_user now broadcasts the received
4166 Remove Channel User packet if it is not broadcast packet already.
4167 The router must broadcast to inform other routers about removed
4170 * Added users field into SilcPacketContext that is a reference count
4171 of the context. One can increase the reference count by calling
4172 silc_packet_context_dup which is now changed to just increase the
4173 reference count instead of duplicating the data. The reference
4174 count is decresed by calling silc_packet_context_free that will
4175 free the data after the reference count hits zero.
4177 For now on the packet context and everything allocated into it
4178 (including the raw packet from network) must be freed by calling
4179 the new silc_packet_context_free function. Added also new function
4180 silc_packet_context_alloc that must be used now to allocate the
4181 context. This also means that if a routine is asynchronous from
4182 silc_[client/server]_packet_parse_type the packet context must
4183 be duplicated by calling silc_packet_context_dup. Otherwise it
4184 gets free'd after silc_[client/server]_packet_parse_type returns.
4185 Also, one must remember that if packet is duplicated then its
4186 reference count must be decresed by calling the free function as
4187 many times as it was duplicated.
4189 * Changed SilcBuffer field from protocol contexts to SilcPacketContext
4190 from both client and server.
4192 Mon Nov 20 23:47:03 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4194 * Made joining to a channel working in router environment.
4196 * Cleaned up JOIN command on server side and create function
4197 silc_server_command_join_channel internal routine to make the
4200 Thu Nov 9 21:12:39 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4202 * Changed silc_command_pending list to SilcDList. Also, added
4203 `ident' field to SilcServerCommandPending structure to identify
4204 the reply and to call correct callback.
4206 Added silc_server_command_pending_check function to replace the
4207 corresnponding macro. The silc_command_pending list is not
4210 * Added silc_command_set_ident into lib/silccore/silccommand.[ch]
4211 to set identifier to previously allocated Command Payload. It
4212 is used to set identifier for command when resending Command
4215 * Added silc_command_payload_encode_payload to encode Command
4216 Payload buffer from SilcCommandPayload structure.
4218 * Added silc_argument_payload_encode_payload to encode Argument
4219 payload buffer from SilcArgumentPayload structure.
4221 Wed Nov 8 21:03:28 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4223 * Changed WHOIS command to support router connection on server side.
4224 The whois request is always sent to router unless the server is
4225 standalone server. After server has received the reply from the
4226 router will it send the reply to the client.
4228 * Added silc_server_packet_broadcast into silcd/server.[ch] to
4229 broadcast received broadcast packet. The function is used only
4230 by router. The broadcast packet is always sent to the router's
4233 * Added silc_id_render function in lib/silcutil/silcutil.[ch] to
4234 render given ID to printable string, for log files for example.
4236 Tue Nov 7 22:14:19 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4238 * Made basic router to router connections working. At least they
4239 can now connect to each other but nothing really works the way
4240 they are supposed - yet.
4242 * Added new initiator token to RouterConnection configuration
4243 file in silcd/serverconfig.[ch]. It is used to tell whether we
4244 are the initiator to the remote router or whether we'll expect
4245 the other end to connect.
4247 * Moved registering of listener task to silc_server_init, hence
4248 the server starts listenning as soon as it is run, even if it
4249 does not have connections to other routers. Let's see how well
4252 * Changed default connection retry timeouts for more suitable in
4255 * Removed cipher and such arguments from silc_idlist_add_client
4256 and silc_idlist_add_server prototypes from silcd/idlist.[ch].
4257 Added new function silc_idlist_add_data to add the keys and stuff
4260 * Added SilcIDListData structure and added it to SilcClientEntry
4261 and SilcServerEntry as their first field in the structure. This
4262 way we can explicitly cast the ID entries to the SilcIDListData
4263 structure and get common data for the entries. In past, we had
4264 to first check what type of connection it is and then cast it to
4265 correct ID entry type. Now, we can directly cast the opaque
4266 pointer to the SilcIDListData (no matter what ID entry it actually
4267 is) and get the data needed.
4269 Mon Nov 6 21:56:12 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4271 * Wow, found a bug in scheduler. The scheduler uninitialized itself
4272 in some circumstances even if threre were timeout tasks, though not
4273 IO tasks, but tasks anyway. Now fixed.
4275 * Defined SilcServerConnection structure to hold connection specific
4276 stuff about directly connected servers and routers. The definition
4277 is currently in silcd/server_internal.h. I thought about having
4278 a bit more important role fro this struct but for now it is used
4279 only when connecting to other server (or router actually).
4281 * Added connecting retry support in server when connecting to
4282 router(s). The retry feature implement exponential backoff
4283 algorithm. Also, added SilcServerParams structure to hold default
4284 parameters for server. For now, it include these retry settings
4285 and are hard coded. After server is moded to be as Silc Server
4286 Library this structure will be more important.
4288 Sun Nov 5 22:28:44 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4290 * Changed client librarys channel->clients table to SilcList and
4291 changed code accordingly.
4293 Thu Nov 2 16:28:01 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4295 * Changed client's channel table to SilcList and changed code
4296 accordingly. Also changed SilcChannelClientEntry to include back-
4297 pointer to the channel so that client entry can use that structure
4298 as list as well and we have fast cross-reference to the channel.
4299 This change dramatically decreased the complexity of channel
4300 handling with client entry and vice versa (removed one extra
4301 loop when searching for channel entry from many functions).
4303 * Changed server->sim from table to SilcDList and changed code
4306 * NAMES command can now be used from user interface. It will show
4307 the user list on the channel, neatly.
4309 * Added realname pointer to SilcClientEntry in lib/silcclient/idlist.h.
4310 Code now saves realname of the user if it becomes available.
4312 * Renamed configure.in to configure.in.pre and made ./prepare
4313 script to automatically add correct version string to
4314 configure.in which it creates from configure.in.pre.
4316 Wed Nov 1 17:21:26 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4318 * NAMES command reply now shows users mode with the nickname when
4321 * Moved silc_client_ch[u]mode[_char] functions from
4322 silc/clientutil.[ch] to lib/silcclient/client.[ch]. Though, that
4323 place sucks, they are utility functions and should be in some
4326 * Fixed some unsigned int's to unsigned short's. Patch by cras.
4328 * Fixed contrib/getopt*.[ch] to not require config.h. Patch by
4331 Tue Oct 31 20:10:37 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4335 * Added TRQ (efficient deque and list library) into lib/trq. This is
4336 a very good list library that is currently used in the SILC. Defined
4337 SilcList API over the library because I didn't like the API very
4338 much. See lib/trq/silclist.h for the API and examples of how to
4339 use the API. Fixed various places in the code to use the new
4340 SilcList API. The SilcList is meant for lists that has a structure
4341 already defined as a list. It is not suitable to add just some
4342 context to the list (in TRQ, the context is the list actually).
4344 So, I defined SilcDList that can be used for the purpose where
4345 predefined list structure does not exit. This can be used as
4346 such list. Now some context just can be added to the SilcDList.
4347 Currently this list is not used in the SILC just yet, though there
4348 are a lot places where this can replace dynamically allocated
4349 tables and I will fix these places, later, to use SilcDList.
4350 See lib/trq/silcdlist.h for SilcDList (they are all inline functions,
4351 and use TRQ internally).
4353 Also fixed some annoying warning messages that the original TRQ
4354 code generated. Also minor changes to TRQ's Makefile.in.
4356 * Added support for querying by Client ID to both WHOIS and
4357 IDENTIFY commands into server, as required by the protocol.
4359 * Removed method function pointers from SilcBuffer structure. They
4360 weren't used to anything and just increased the context size for
4361 no good reason. This change also made silc_buffer_alloc and
4362 silc_buffer_free functions inline functions.
4364 * Disabled command flooding detection support until it's fixed so
4365 that it accepts commands in but does not execute them more than once
4368 * Added silc_net_localhost(), to return local hostname, into
4369 lib/silcutil/silcnet.[ch]. Also added client->hostname pointer
4370 that must be initialized before calling silc_client_init.
4372 * Added new function: silc_server_send_notify_on_channels to send
4373 notify messages to all channels client has joined. It is assured
4374 that the message is sent only once per client.
4376 * Moved silc_log_format (from lib/silcutil/silclog.[ch] into
4377 lib/silcutil/silcutil.[ch] as silc_format function. The new
4378 function is generic and is used by server as well, not only by
4379 the logging routines.
4381 * Added new SKE status type: SILC_SKE_STATUS_BAD_VERSION to indicate
4382 the provided version string was not acceptable. Added new function:
4383 silc_ske_check_version into lib/silcske/silcske.h. The function
4384 must be implemented by the application (client or server) and it
4385 does not reside in the SKE library. The function checks the version
4386 string remote end sent.
4388 * Added back pointers (to opaque context and to SilcSocketConnection)
4389 into SilcPacketContext structure into lib/silccore/silcpacket.h.
4391 * Added silc_packet_context_dup into lib/silccore/silcpacket.[ch] to
4392 duplicate packet context structure.
4394 * Changed `notify' client operation to send same arguments as client
4395 receives from server except for ID's. ID's are mapped to correct
4396 ID entry and that is returned. Also, if channel entry is not sent
4397 by server but the notify is for channel the channel entry is sent
4398 to application (otherwise application doesn't know that it is for
4399 channel (library gets it from packet's Destination ID)).
4401 * Added silc_client_remove_from_channels into client library to
4402 remove a client from all channels it has joined to. Used when
4403 received SIGNOFF notify from server. Added also new function
4404 silc_client_replace_from_channels to replace old ID entry with
4405 new ID entry on all channels. Used when received NICK_CHANGE
4408 * Fixed ID Cache list handling in silc_idlist_get_client in
4409 lib/silcclient/idlist.c. Also, added silc_idlist_get_client_by_id
4410 to get (or query) client by ID.
4412 * Updated TODO list.
4414 * Added connection authentication status message defined by the
4415 protocol: SILC_CONN_AUTH_OK and SILC_CONN_AUTH_FAILED and added the
4416 support for these into the code in client and server side.
4418 * Added generic function silc_client_send_command to send any command
4419 with variable argument list. Application should use this function
4420 to send commands if the command functions provided by the library
4421 does not suite for the application's user interface needs.
4423 * Added new `failure' client operation. Application is notified about
4424 received failure packet if client is executing a protocol. In this
4425 case the protocol's execution has failed.
4427 * Added SKE's end notify to send the SKE_SUCCESS notify message that
4428 is required by the protocol.
4430 * Added SILC_PROTOCOL_STATE_FAILURE to indicate received failure
4431 packet from remote. SILC_PROTOCOL_STATE_ERROR indicates local
4434 * Added status flag to SilcSKE object to indicate realtime status
4435 of the SKE protocol.
4437 * Application receives now exactly same command reply arguments as
4438 the library receives from server. However, if ID is received the
4439 corresponding ID entry is returned to the application (eg. Client
4440 ID is mapped to correct SilcClientEntry entry and that is returned).
4441 Changed command_reply client operation due to this change.
4443 * Changed all ID's in commands and in command replys as ID Payloads.
4444 Change affected both client and server side codes.
4446 All ID's sent in SILC network (with execption of ID's in SILC
4447 Packet header) are sent in ID Payload to support variable length
4450 * Server now notifies nick changes and notifies all clients on
4451 the channels about the new nickname (about the new Client ID,
4454 * Implemented CMODE command to change channel modes. Supports all
4455 channel modes defined by the protocol specs except ban and invite
4456 lists. (Also, private channel key mode is supported but support for
4457 setting private channel key in client is missing, thus, this mode
4458 has no effect on client side (except that server requires that the
4459 client uses private channel key and normal channel traffic does not
4462 Also, invite mode works per se, but INVITE command does not work
4463 yet correctly, so you can set channel as invite only channel but
4464 inviting clients to the channel does not work (it is yet to be
4465 thought what's the best way to do it).
4467 * Added new command SILC_COMMAND_CUMODE to change user mode on the
4468 channel. Defined user modes: CHANNEL_FOUNDER and CHANNEL_OPERATOR.
4469 Implemented CUMODE command to change user's mode on the channel.
4470 Supports all modes defined by the protocol specs.
4472 * Added NAMES command reply to return users modes on the channel.
4474 * Removed unnecessary and slow ciphers from lib/silccrypt.
4476 * Set SO_KEEPALIVE option to connection sockets by default.
4478 * Added new command reply status: SILC_STATUS_USER_NOT_ON_CHANNEL.
4480 * Added notify types: MOTD, CMODE_CHANGE and CUMODE_CHANGE. Also,
4481 redefined the Notify Payload into protocol specs.
4483 * Added silc_id_payload_parse_id to get ID directly from raw
4486 Mon Oct 9 20:57:02 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4488 * Changed SILC_COMMAND_IDENTIFY in protocol specification to
4489 accept searching by Client ID as well.
4491 * Added support for LEAVE and SIGNOFF notify types in client library.
4493 * Added silc_id_payload_parse_data into lib/silccore/silcpayload.[ch]
4494 to parse ID Payload from raw data.
4496 Sun Oct 8 19:33:08 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4498 * Added flags parameter into silc_ske_assemble_security_properties
4499 function in lib/silcske/silcske.[ch].
4501 * Changed notify client operation to fit better for notify messages
4502 sent by server. The notify payload received from server is now
4503 passed to the application (after parsing it to SilcNotifyPayload).
4504 It is application's responsibility to retrieve the arguments
4505 from the payload and show the message the way it wants. The message
4506 sent by server is implementation specific.
4508 * Changed public keys to comply with the protocol specification.
4509 Old public keys are not supported anymore and are not compatible.
4511 * Removed nickname from Channel Payload as the latest draft removed
4512 it. The client must resolve the nickname from the NAMES command
4513 reply received when it joined the channel.
4515 Also, changed all channel_xxxx_payload to channel_payload_xxxx.
4517 Sat Oct 7 21:55:01 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4519 * Fixed some errors in protocol specification drafts.
4521 * Created lib/silccore/silcnotify.c to implement Notify Payload
4522 encoding and decoding, lib/silccore/silcpayload.[ch] to implement
4523 generic payloads described by protocol specifications. The file
4524 includes implementations for ID Payload and Argument Payload.
4526 * Changed Command Payload implementation to use the new Argument
4527 Payload. Changed command_xxxx_payload to command_payload_xxxx
4528 to comply with SILC coding conventions.
4530 * Added suppport for Argument Payload handling in Notify Payload
4531 implementation as protocol requires it. Added the new support
4532 into server and client lib as well.
4534 Thu Oct 5 21:16:28 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4536 * Added support for multiple nicknames on same channel. [n] is
4537 added locally to the nickname if there are more than one same
4538 nicknames on the channel.
4540 * Server now sends all nicknames that matched WHOIS request.
4541 Client also shows the list received from server.
4543 * Added TOPIC command to client side. User can now set and show
4544 current topic on channel.
4546 * Added MOTD command to client and server. Also, server sends the
4547 motd when client connects to the server.
4549 * Changed version strings to comply ISO 8601.
4551 Wed Oct 4 23:29:06 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4553 * Fixed protocol error handling in client library. It should now
4554 cope even if the SKE fails for some reason.
4556 * Made new protocol specification drafts for submitting to IETF.
4558 * Implemented TOPIC command to server in silcd/command.c.
4560 * Added two new notify types into lib/silccore/silcnotify.h:
4561 SILC_NOTIFY_TYPE_NICK_CHANGE and SILC_NOTIFY_TYPE_TOPIC_SET to
4562 notify nickname change and topic setting/change on a channel.
4564 * API change of command_reply operation in client library. The
4565 application gets now the status type received from server as well.
4567 Sat Sep 30 16:57:42 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4569 * Removed the function just added to lib/silcutil/silcschedule.[ch].
4571 * Cras fixed and optimized the packet handling even further and
4572 it should work now. Minor change to the prototype of function
4573 silc_packet_receive_process in lib/silccore/silcpacket.[ch].
4575 Sat Sep 30 08:48:47 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4577 * Added new function into lib/silcutil/silcschedule.[ch]:
4578 silc_schedule_with_fd to select() a specified fd. The function
4579 returns after timeout expires or data arrives or goes. The
4580 function is used by packet routines to wait that all data is
4581 received from network.
4583 * Fixed data reading from network in lib/silccore/silcpacket.c.
4584 The code now assures that all data is read from the fd and then
4585 continues packet processing. This was a bug fix since the code
4586 used to drop some data in some circumstances.
4588 * Added new function into lib/silcclient/client.[ch]:
4589 silc_client_start_key_exchange to start key exchange after
4590 connection has been established to server. The code internally
4591 now uses this funtion but its main purpose was to provide it
4592 for applications that perform their own connecting. After
4593 application has created a connection it merely calls this
4594 function to start the key exchange between client and server.
4595 The library takes care of everything else after that.
4597 Updated also lib/silcclient/README to explain the usage of
4600 * Do not send to application information that connection has
4601 been established. Application gets notified it by connect
4604 Thu Sep 28 23:40:19 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4606 * Applied cras's patch to add silc_schedule_one function. The
4607 function runs scheduler once and returns.
4609 * Fixed the scheduler after cras messed it up. The timeout
4610 handling works now as it's supposed to work.
4612 * Added into lib/silccore/ silcnotify.h to include notify
4613 message types support. Changed silc_server_send_notify*
4614 functions, in server.[ch], to support those new notify types.
4615 Added the support for the notify types into client library,
4616 as well. Added new notify client operation into ops.h in
4619 * Changed silc_server_packet_send_to_channel to send normal
4620 packets instead of just channel message packets. The function
4621 is now used to send the notify packets to channels. It is not
4622 used to send channel message packets anymore, as server never
4625 * Added explicit casting into lib/silcutil/silcbuffmt.c to few
4626 va_arg()s as it seems to require it nowadays. I guess, if SILC
4627 is compiled with older va_arg() the new code should work anyway.
4629 Wed Sep 13 18:10:14 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4631 * Splitted core library. Core library (lib/silccore) includes
4632 now only SILC protocol specific core (and common) components.
4633 Created new utility library (lib/silcutil) that includes more
4634 generic purpose stuff. The stuff for util library was taken
4635 from the old core library. This was minor and easy split.
4637 * Created SILC Client Library (lib/silcclient) that includes
4638 implementation of the SILC client without user interface. This
4639 was major move from silc/ directory. The code has been changed
4640 so that it is transparent towards the user interface. The
4641 silc/ directory includes now the same user interface as before
4642 and it uses the new client library. Read lib/silcclient/README.
4643 Basicly, the client library performs everything else related
4644 to SILC except user interface handling. Also, configuration
4645 files are considered to be part of user interface and library
4646 does not handle them.
4648 This change also changed a lot of structures, function naming etc.
4649 Most important change was that SilcClientWindow object was
4650 renamed to SilcClientConnection in the client library. Created
4651 also new file lib/silcclient/ops.h. Also added new files
4652 silc/local_command.[ch] and silc/client_ops.[ch].
4654 All these changes were made to make it easier for user interface
4655 designers to create what ever user interface for the SILC client
4658 It is also expected that the server will be moved to lib
4659 directory as well and SILC Server Library will be created;
4660 sometimes in the future.
4662 * Removed Local commands from lib/silccore/silccommand.h as
4663 they are application specific and new client library does not
4664 handle any of those anymore.
4666 * Several functions moved to lib/silcutil/silcutilc.[ch] from
4667 old client implementation in silc/.
4669 * Added support for callback functions in SILC_LOG_* macros.
4670 Application can now set its own callbacks that will be called
4671 instead of using the default functions that will always print
4672 the debug messages to stderr (or stdout). Also, debugging can
4673 now be disabled by setting silc_debug to FALSE and re-enabled by
4674 setting it to TRUE. Note, that logging will still work even
4675 if debugging is disabled.
4677 New functions in lib/silcutil/silclog.[ch]: silc_log_set_callbacks,
4678 silc_log_reset_callbacks, silc_log_set_debug_callbacks and
4679 silc_log_reset_debug_callbacks.
4681 * To enable debugging in silc client one must give now -d
4682 option on command line.
4684 * Changed silc_schedule_init to automatically allocate task queues
4685 if they are not allocated before calling it.
4687 Thu Sep 7 10:49:33 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4689 * Added GMP 3.1 into math library.
4691 Sun Aug 20 21:27:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4693 * Added SILC_PACKET_REMOVE_CHANNEL_USER to remove a client from
4694 a channel in SILC network. The packet is used by servers and
4695 routers to notify other routers that user has left a channel.
4696 This little feature was missing until now. Added the feature
4697 to protocol specification as well.
4699 Added functions: silc_server_send_remove_channel_user and
4700 silc_server_remove_channel_user into server.[ch].
4702 * Added SILC_PACKET_REKEY and SILC_PACKET_REKEY_DONE into
4703 lib/silccore/silcpacket.h. However, they are not implemented
4706 Sat Aug 19 23:04:16 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4708 * Fixed joining to a channel and sending channel messages
4709 between server and router. The channel message sending should
4710 now work inside a cell.
4712 Tue Jul 25 20:46:13 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4714 * Fixed the private message sending between server and router.
4715 The private message sending should now work inside a cell.
4717 * Added silc_server_replace_id into server.[ch] to replace
4718 existing ID in the SILC network.
4720 * Added silc_idlist_find_server_by, silc_idlist_replace_client_id
4721 and silc_idlist_replace_server_id into idlist.[ch] in server.
4723 Mon Jul 24 18:33:31 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4725 * Fixed the server to server connections. Server can again now
4726 connect to router. Router to router connections probably does
4729 Thu Jul 20 13:15:01 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4731 * Added dynamic protocol registering support. Now protocols can
4732 registered and unregistered on the fly. Patch by cras.
4734 Wed Jul 19 19:08:46 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4736 * Added lib/contrib directory to hold routines that some platforms
4737 don't have but are needed by SILC.
4739 * Added getopt.c, getopt1.c and getopt.h from GNU C library
4740 into lin/contrib to provide getopt() and getopt_long() for
4741 those who don't have it.
4743 Tue Jul 18 20:41:20 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4745 * Added AWAY command to client. When away message is set and
4746 client receives a private message packet the client automatically
4747 replies to the sender with the away message.
4749 * Fixed a bug in lib/silcmath/mpbin.c: silc_mp_mp2bin. This
4750 bug seemed to be the cause of recent problems when compiling
4753 * Added version detection support to SKE protocol specification
4754 and added the new changes to the SKE implementation as well.
4755 There were other minor changes in the SKE protocol as well.
4757 Many changes in lib/silcske/silcske.[ch] and in
4758 lib/silcske/payload.[ch].
4760 * Added ^U functionality, clear input line. Patch from cras.
4762 Mon Jul 17 23:33:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4764 * Mainly small bugfixes on core library. Fixed some debugging
4765 logging and buffer overflow in silclog.c.
4767 * Updated config.sub and config.guess on the distribution tree.
4769 Sat Jul 15 15:33:48 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4771 * Added command lagging support in server. Client may execute
4772 commands now only once in two seconds.
4774 Thu Jul 13 22:10:21 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4776 * Optimized packet reception. MAC computation and checking is now
4777 also more optimized. A lot previously duplicated code is now
4778 used as generic by both client and server.
4780 * Fixed key pair generation in clientutil.c
4782 Wed Jul 12 18:28:07 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4784 * Added into lib/silccore/silcbufutil.[ch] new function;
4785 silc_buffer_realloc.
4787 * Moved generic packet sending/encryption functions to
4788 lib/silccore/silcpacket.[ch] from client and server. Some
4789 rewriting of the functions.
4791 * Moved all generic packet reception/decryption functions to
4792 lib/silccore/silcpacket.[ch] from client and server. The
4793 packet processing is now much cleaner in both client and server.
4794 These were major changes in both client and server.
4796 * Created many common functions in server to do packet sending.
4797 Previously code were duplicated a lot, this has been removed
4800 Tue Jul 11 20:27:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4802 * Rewrote major parts of the ID cache system. Don't know
4803 whether it is better now or not but at least the API is more
4806 * Major rewrite on ID cache stuff on client because of the ID
4807 cache API changes. Added idlist.c to client.
4809 * Also major rewrite on ID cache stuff on server as well.
4810 Major rewrite of idlist.[ch]. SilcXXXList's are now named
4811 SilcXXXEntry's. We won't keep anymore idlist specific pointers
4812 in hand, instead they are all put into the ID cache system now.
4813 All server_idlist_* routines uses ID cache now instead of
4814 traversing its own lists (those lists does not exist anymore).
4815 SilcIDList though still exists. Also, SilcXXXEntry's are
4818 Sun Jul 9 15:19:24 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4820 * Finally made the SKE implementation compliant to the protocol
4821 specification. All mp integers are now binary encoded as
4822 opposed being HEX encoded.
4824 * Added lib/silcmath/mpbin.[ch]. Encoding mp intergers to and
4827 * Added into lib/silccore/silcutil.[ch] PEM encoding/decoding
4828 functions: silc_[encode/decode]_pem. Also added function
4829 silc_encode_pem_file to PEM encode with newlines ('\n') for
4832 * SILC public keys are now encoded either PEM or binary. Same
4833 option is for private keys as well. By default private keys
4834 are binary encoded and public keys PEM encoded. Silly HEX
4835 encoding were removed.
4837 * Added into lib/silccrypt/silchash.[ch] silc_hash_fingerprint
4838 function to create fingerprints.
4840 * Fixed a bug in SHA1; does not change the original data anymore.
4842 * Partly implemented INFO command on client and server side.
4843 Fixed CLEAR command. Changes to SERVER command; show current
4844 server(s) when giving command without arguments. Added
4845 VERSION command to client.
4847 * Added check to server that unregistered connections cannot
4848 execute commands (unless it is specificly allowed).
4850 Thu Jul 6 18:12:24 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4852 * Fixed screen refresh.
4854 * Fixed channel joining bug from client. On some circumstances
4855 client tried to join to a channel it had already joined.
4857 * Added public key verification process into client's protocol.c.
4858 The client now verifies the public key from user and saves
4859 it into ~./silc/serverkeys/ directory.
4861 Added into: clientutil.[ch]: silc_client_verify_server_key.
4863 * Changed SKE protocol's silc_ske_initiator_finish function
4864 to accept callback function that verifies the received public
4865 key. Removed old silc_ske_verify_public_key function.
4867 Wed Jul 5 19:19:02 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4869 * Added into silcpkcs[ch]: silc_pkcs_public_key[_data]_set and
4870 silc_pkcs_private_key[_data]_set.
4872 * Made the password and public authentication more cleaner in
4873 server's protocol.c.
4875 * Removed historic and obsolete protocol `channel_auth' from
4876 both client and server.
4878 * Removed wrong way of sending command status messages from
4879 server to client in server's command.c. The old way violated
4880 protocol specification.
4882 Changes to silccore/silccommand.[ch]: removed
4883 silc_command_encode_status_payload -> not needed anymore,
4884 changed silc_command_encode_payload_va to accept extra
4885 argument on variable argument list. The argument type must
4886 now be provided to the function. Also, added new function:
4887 silc_command_encode_reply_payload_va which is same as
4888 normal command_encode_payload_va except command status type
4889 is provided as extra argument.
4891 Tue Jul 4 18:26:39 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4893 * Added ~./silc directory handling. The directory includes the
4894 public and private keys for the client.
4896 Added silc_client_check_silc_dir, silc_client_create_identifier
4897 and silc_client_load_keys.
4899 * Implemented SILC protocol compliant public key. Added public
4900 and private key saving to and loading from files.
4902 Added into silcpkcs.[ch]: silc_pkcs_encode_identifier,
4903 silc_pkcs_public_key_encode[_data], silc_pkcs_public_key_decode,
4904 silc_pkcs_private_key_encode[_data], silc_pkcs_private_key_decode,
4905 silc_pkcs_public_key_alloc, silc_pkcs_public_key_free,
4906 silc_pkcs_private_key_alloc and silc_pkcs_private_key_free.
4908 Implemented: silc_pkcs_save_[public/private]_key[_data] and
4909 silc_pkcs_load_[public/private]_key.
4911 Mon Jul 3 18:51:27 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4913 * Added silc_server_get_route (route.[ch]) to get connection
4914 data for the fastest route for given ID.
4916 * Implemented INVITE command on client and server. The command
4917 were re-defined in the SILC Protocol Specification and the
4918 implementation now complies with the specification.
4920 * Implemented PING command on client and server.
4922 * Implemented NAMES command on client and server. The server side
4923 supports currently only normal server not router server yet.
4924 Some changes to NAMES definition in SILC protocol specification.
4926 Sun Jul 2 18:23:01 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4928 * Implemented LEAVE command on client and server.
4930 * Previously deprecated SILC_PACKET_FORWARDED flag is now in use
4931 again. This change was made to the protocol as well. Server
4932 should not violate the protocol specification anymore.
4934 Fri Jun 30 14:03:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
4936 * Added SOCKS4 and SOCKS5 support to SILC client. SOCKS5
4937 was tested. SOCKS4 was not but should work anyway.
projects / silc.git / blob