1 Wed May 16 23:03:30 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3 * Added entry_count field to the SilcHashTable to keep the number
4 of the entries in the table. Implemented the function
5 silc_hash_table_rehash. Added new function
6 silc_hash_table_count. Affected file lib/silcutil/silchashtable.c.
8 Fixed a minor bug in silc_hash_table_free.
10 * Added silc_hash_string, silc_hash_uint, silc_hash_ptr,
11 silc_hash_client_id, silc_hash_server_id and silc_hash_channel_id
12 into the lib/silcutil/silcutil.[ch].
14 Wed May 16 20:02:47 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
16 * Implemented a collision resistant hash table into the
17 lib/silcutil/silchashtable[ch]. See the header and the source
18 for the SilcHashTable API.
20 Tue May 15 22:05:46 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
22 * Merged dotconf version 1.0.2 into lib/dotconf.
24 Sun May 13 19:32:09 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
26 * Do not compile anything in lib/silcsim/* if the SIM support
27 is not enabled. The tree should now compile without problems
30 Thu May 10 22:49:51 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
32 * Compiled the SILC under cygwin. Compiled and tested briefly
33 without problems. More tests needed. The SIMs didn't compile
36 * Added various #ifdef HAVE_* stuff to lib/silccrypt/silrng.c.
38 * Fixed possible crash in silc_get_username in the
39 lib/silcutil/silcutil.c.
41 Tue May 8 09:04:03 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
43 * Fixed a va_arg in silc/client_ops.c.
45 * Oops, RC5 routines were named AES and caused some problems
46 when not using SIM's. Affected file lib/silccrypt/rc5.c.
48 Sun May 6 13:59:48 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
50 * Added new SilcIDIP structure into the lib/silccore/id.h and
51 replaced the old `ip' fields from all SILC ID's to that type.
52 This is a step towards IPv6 support.
54 The silc_id_get_len takes now the ID as an extra argument.
55 The silc_id_id2str, silc_id_str2id and silc_id_dup now supports
56 both IPv4 and IPv6 based ID's.
58 The affected files are lib/silccore/id.[ch] and other files
59 around the tree using these routines.
61 * Removed the ID length arguments in server from various
62 silc_server_send_notify_* routines -> they are not needed
65 Sat May 5 13:56:33 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
67 * Fixed memory leak in silc_encode_pem_file in the file
68 lib/silcutil/silcutil.c.
70 Thu May 3 21:23:50 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
72 * Check minor version as well in the SKE. Affected files are
73 silcd/protocol.c and lib/silcclient/protocol.c.
75 * Added --identifier option to the server so that an identifier
76 can be when creating the public key for the server. Affected
77 file is silcd/silcd.c.
79 * Fixed minor decoding bug in silc_pkcs_decode_identifier in
80 lib/silccrypt/silcpkcs.c.
82 Wed May 2 20:50:49 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
84 * Register default ciphers and stuff when using -C option with
85 the server. Affected file sildc/silcd.c.
87 * Put back the servers public key filename format, it is better
88 than the new one. For now, the client keys are saved with the
89 new filename format. The affected file silc/client_ops.c.
91 * Implemented the Cipher API for the rest of the ciphers that
92 did not implement it or implemented it the wrong way.
94 Wed May 2 13:31:26 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
96 * Register default ciphers and stuff when using the -S option
97 in the client. Affected file silc/silc.c. Same also when
98 creating new key pair with -C option.
100 Tue May 1 14:18:13 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
102 * Fixed the silc_verify_public_key client operation function to
103 save the public keys differently. The fingerprint is now
104 used as filename and not the hostname. This way also the
105 client keys are saved uniquely and not with hostnames. The
106 affected file is silc/client_ops.c.
108 * Trimmed the silc_hash_fingerprint function to remove extra
109 whitespaces from the end of the fingerprint. The affected
110 file is lib/silccrypt/silchash.c.
114 * Added silc_cipher_register_default function to register all
115 default ciphers. It can be used when configuration files
116 does not exist and the application does not want any specific
117 ciphers in any specific order.
119 The SilcDList is now used as silc_cipher_list dynamically
120 allocated cipher list. Removed the static list all together
121 and now all ciphers must be allocated to the dynamic list.
122 The silc_cipher_alloc routine was changed to check only the
125 All silc_cipher_* routines that used to return int returns
128 The affected files lib/silccrypt/silccrypt.[ch].
130 * The same thing was done to silc_hash_* as for silc_cipher_*
131 routines. Affected files lib/silccrypt/silchash.[ch].
133 * The same thing was done to silc_pkcs_* as for silc_cipher_*
134 routines. Affected files lib/silccrypt/silcpkcs.[ch].
135 Added also silc_pkcs_[un]register[_default] functions.
136 Removed the data_context from the PKCS API.
138 * Added silc_hmac_register_default function to register default
139 hmacs. Affected files lib/silccrypt/silchmac.[ch]. Added also
140 SILC_ALL_HMACS macro that can be used with silc_hmac_unregister
141 to unregister all hmacs at once.
143 * Register the default ciphers, hash functions, PKCSs and HMACs
144 if client's configuration file does not exist. The affected
147 * The client did not load the hash functions from the SIM
148 modules at all. Added support for this. Affected file is
151 * When decoding public key with silc_pkcs_public_key_decode, check
152 the supported algorithm only if PKCS are registered. Affected
153 file lib/silccrypt/silcpkcs.c. The same was done with the
154 silc_pkcs_private_key_decode.
156 * Fixed the SILC List routines to keep the list always in order.
157 It used to change the list's order when traversing the list but
158 not it preserves the order. Affected file lib/trq/silclist.h.
160 Mon Apr 30 17:29:03 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
162 * Added the client library to use the SilcSocketConnection's
163 reference counter (by silc_socket_dup) to prevent the bug that
164 the socket object may be freed underneath async operation.
166 * The name resolv library checking fixes in the configure.in.pre.
169 * Created new version of the protocol drafts for future
170 development. The -03 drafts are the ones that will be changed
171 in the trunk now and the -02 will remain as they are.
173 * Send list of CUMODE notifys to the router when announcing
174 the channel users to the router. Affected file silcd/server.c.
175 If the router receiving channel founder CUMODE for a channel
176 that already has channel founder it will send CUMODE notify
177 to the sender to remove the channel founder rights from the
178 announced client. Affected file silcd/packet_receive.c.
180 * The CUMODE notify may now use Server ID as well as the entity
181 who changes the mode. Updated protocool specs.
183 * Updated INSTALL and README files.
185 Sun Apr 29 23:17:50 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
187 * New web pages in the http://silc.pspt.fi. The pages was
192 Sun Apr 29 13:33:41 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
194 * Implemented the [DenyConnectin] config section in the server.
195 Added silc_server_config_denied_conn to check whether incoming
196 connection is denied. Affected file silcd/serverconfig.[ch].
198 * Do not check the ports when checking the incoming configuration
199 data if the port is 0, meaning any. Affected file is
200 silcd/serverconfig.c.
202 Fri Apr 20 18:58:43 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
204 * Fixed buffer overflow in silc_string_compare in the file
205 lib/silcutil/silcutil.c.
207 * Fixed double free in silc_server_command_leave in the file
210 Fri Apr 20 14:00:11 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
212 * Fixed the version checking in the server. Affected file is
215 Thu Apr 19 19:52:46 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
217 * Fixed the configuration data fetching when accepting new
218 connections in the server. Affected file silcd/server.c.
220 Thu Apr 19 11:40:20 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
222 * Added `sender_entry' argument to the function
223 silc_server_packet_relay_to_channel so that we can check
224 whether some destination actually belongs to the same route
225 the sender belongs (ie, we must not resend the packet to the
226 sender). Affected file silcd/packet_send.[ch].
228 * Added `servername' field to the SilcClientEntry in the server
229 to hold the name of the server where client is from. Affected
230 file is silcd/idlist.h.
232 Wed Apr 18 22:19:03 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
234 * Moved the channel message encrypting in the router betwen
235 router connections from silc_server_channel_message to the
236 silc_server_packet_relay_to_channel since we want to check
237 whether we have anybody channel before encrypting anything.
238 Affected files silcd/packet_[receive/send].c.
240 Tue Apr 17 21:18:19 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
242 * Fixed the [AdminConnection] server config section to support
243 multiple entries. Affected file silcd/serverconfig.c.
245 * Added support into the server to check the validity of the
246 incoming connection before executing any KE or authentication
249 * The connection configuration is now saved to the KE and
250 connection auth protocol contexts and not fetched anymore in
251 the protocol. Affected files silcd/server.c, silcd/protocol.[ch].
253 * The local hosts listenning address and port is also resolved
254 now when starting the server. We want to have the socket object
255 to include the real address and port for the listener. Added
256 new function silc_net_check_local_by_sock into the files
257 lib/silcutil/silcnet.[ch].
259 * Fixed a broadcast bug in server -> do not broadcast if we
262 * Fixed a routing bug. Do not route broadcast packets ever.
263 Broadcast packets must be processed always and not routed since
264 they may be destined to some other host than yourself and thus
265 would get routed without no good reason. Affected file is
268 * Added function silc_server_config_is_primary_route to check
269 whether primary router connection has been configured (a router
270 configuration that we are initiating). If there is not, we
271 will assume that there is only two routers in the SILC network
272 and we will use the incoming router connection as our primary
273 route. Affected files silcd/serverconfig.[ch], silcd/server.c.
275 * Changed the order of the broadcasting. Broadcast _after_ the
276 packet has been processed not before. Affected file is
279 * Fixed a [ClientConnection] parsing bug. The port was never
280 parsed correctly thus resulting to port 0. Affected file
281 silcd/serverconfig.c.
283 * Fixed silc_server_send_notify_args -> it ignored the `broadcast'
284 argument and did not set the broadcast packet flag. Affected
285 file silcd/packet_send.c. Fixed same bug in the function
286 silc_server_send_notify as well.
288 * If we receive NEW_ID packet for our own ID in the server, ignore
291 Mon Apr 16 12:10:33 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
295 * Removed the nickname from the Private Message Payload.
296 Updated the code and the protocol specs.
298 * Updated protocol specs for submitting to the IETF.
300 * Tweaked the Random Number Generator a bit. Affected file
301 lib/silccrypt/silcrng.c. Exported a new function
302 silc_rng_[global]_add_noise which can be used to add more
305 Sat Apr 14 16:21:32 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
307 * Do not parse packets with different timeout when protocol
308 is active -> may cause problem with rekey. Affected file
311 * When server receives signoff notify it must not create
312 new channel key if the client is on any channels since the
313 sender of the signoff notify will create it.
315 Fri Apr 13 17:12:46 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
317 * Added printing of error messages during SKE protocol from the
318 failure packet sent by server during SKE. Affected file
321 * Removed the client's failure_callback handling with timeout
322 and handle it immediately when received.
324 * The SKE library returned wrong type in SUCCESS and FAILURE
325 packets. They must be 32 bit MSB not 16 bit MSB.
327 Fri Apr 13 00:09:08 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
329 * Ok, rewrote the logic of the re-key and now it seems to work.
330 I tested it on high traffic with frequent re-keys without
331 problems. Added hmac_receive (and renamed hmac to hmac_send)
332 in SilcClientConnection in lib/silcclient/client.h and
333 in SilcIDListData in silcd/idlist.h. Also, removed the
334 SilcPacketParserContext's cipher and hmac fields as they are
335 not needed anymore and actually caused some problems when
336 the ciphers and hmac's changed underneath the packet parser.
338 Thu Apr 12 14:42:51 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
340 * If re-key protocol is active then process the incoming packets
341 synchronously since we must assure that icoming packets encrypted
342 with the old key is processed before the new keys is set to
343 use. This is true other packets than for REKEY packets.
344 Affected file silcd/server.c. The same was done to client library
345 as well, affected file lib/silcclient/client.c.
347 Thu Apr 12 12:01:52 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
349 * Fixed bug in client and server to accept the force send if
350 the packet is send from silc_[server/client]_packet_process
351 function. Otherwise the packets are never delivered, oops.
353 Wed Apr 11 22:10:15 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
355 * Disable force sending of packets when REKEY protocol is active.
356 We must assure that no packet is sent directly when rekey is
357 performed. All packets must be sent through packet queue.
358 Added macro SILC_SERVER_IS_REKEY to silcd/server.h and
359 SILC_CLIENT_IS_REKEY to lib/silcclient/client.h. Affected
360 function is silc_[server/client]_packet_send_real to check
363 * Replaced the SIM paths from example config files to
364 /usr/local/modules. Also, make install creates now
365 /usr/local/silc/logs directory to hold all the SILC server
368 Wed Apr 11 16:59:59 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
370 * Made the configure.in.pre work on Solaris. Patch by salo.
372 * Made all ciphers compatible with non-x86 machines. Defined
373 CBC mode macros into lib/silccrypt/ciphers_def.h.
375 Tue Apr 10 20:32:44 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
377 * Fixed the make install.
379 Tue Apr 10 16:20:34 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
381 * When MAC computation fails the silc_packet_decrypt returned 0
382 even though it was supposed to return -1. Fixed this. The
383 affected file is lib/silccore/silcpacket.c.
385 * Do not replace the config files in /etc/silc (in make install)
386 if they already exist. Affected file ./Makefile.am.
388 * Do not send re-key packets immediately but through packet queue.
389 Affected file silcd/protocol.c and lib/silcclient/protocol.c.
391 * Changed silc_net_check_host_by_sock to return FALSE if the
392 IP/DNS could not be resolved. Though, it returns the IP address
393 now even if it could not resolve it (but returns also FALSE).
394 Affected file lib/silcutil/silcnet.[ch].
396 Mon Apr 9 21:54:44 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
398 * Added silc_pkcs_decode_identifier to decode the public key's
399 identifier. Affected file lib/silccrypt/silpkcs.[ch].
400 Added also silc_pkcs_free_identifier. Added also new context
401 SilcPublicKeyIdentifier.
403 * Added -S option to the silc client. It is used to dump the
404 contents of the specified public key file.
406 * Changed the PKCS api to return the public key length when
407 setting the public key.
409 * Fixed a fatal bug in the public and private key file loading.
410 Affected file lib/silccrypt/silcpkcs.c.
412 * Execute the packet parsing for client with zero (0) timeout
413 if the protocol is active. Affected file silcd/server.c.
415 Sun Apr 8 19:30:56 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
417 * Made the key generation options to the silcd program. Added
418 -C option, equivalent to client's option.
420 * Added new [ServerKeys] config section to the server. It
421 configures the server's public and private key.
423 * Defined generic Public Key Payload into the protocol
424 specification to send specific type of public keys and
427 * Defined new command SILC_COMMAND_GETKEY to fetch a client's
428 public key or certificate.
430 * Implemented the GETKEY command to the server and to the
431 client library and on user interface.
433 Sun Apr 8 01:37:21 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
435 * Made preliminary `make install' work.
437 Thu Apr 5 17:42:30 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
439 * Added SilcServerRekey context into silcd/idlist.h.
441 * Added the PFS support as defined in the specification to the
442 SKE protocol. Affected files lib/silcske/*.c.
444 * Added `ske_group' field to the SilcServerRekey context to hold
445 the number of the SKE group that is used with PFS in re-key.
446 Affected file silcd/idlist.h.
448 * Added PFS re-key support to the server. Affected file is
451 * Added silc_protocol_cancel to cancel execution of the next
452 state of the protocol. Affected file is
453 lib/silccore/silcprotocol.[ch].
455 * Added the re-key support with and without PFS to the client
456 library. Re-key is performed once in an hour, by default.
458 Added new protocol type SILC_PROTOCOL_CLIENT_REKEY.
459 Added silc_client_rekey_callback and silc_client_rekey_final.
460 Affected files are lib/silcclient/protocol.[ch] and
461 lib/silcclient/client.[ch].
463 * Removed the `hmac_key' and `hmac_key_len' fields from the
464 SilcClientConnection structure; not needed. Affected file is
465 lib/silcclient/client.h.
469 Wed Apr 4 16:32:31 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
471 * Do not ask whether user wants to use the negotiated private key
472 for private messages, just use it. Affected file is
473 silc/local_command.c.
475 * Added `send_enc_key' and `enc_key_len' fields to the
476 SilcIDListData structure since they are needed in the re-key
477 phase. Affected file is silcd/idlist.[ch].
479 * Implemented the simple re-key protocol into the server.
480 Affected files silcd/server.c and silcd/protocol.[ch]. The
481 re-key will be performed once in an hour, by default.
483 Added new protocol type SILC_PROTOCOL_SERVER_REKEY.
484 Added silc_server_rekey, silc_server_rekey_callback and
485 silc_server_rekey_final.
487 * Removed Tunneled flag from the protocol. Updated the code
488 and the specifications.
490 * Adde `pfs' field to the SilcIDListData to indicate whether
491 the PFS is to be performed in the re-key. Affected file is
494 Tue Apr 3 21:52:42 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
496 * Defined uint8, int8, uint16, int16, uint32, int32, uint64 and
497 int64 of at least the xintXX size. If void * is less that 4
498 bytes uint32 * will be used. Defined bool as boolean.
500 * Changed _ALL_ unsigned long and unsigned int to uint32,
501 unsgined short to uint16 in the source tree.
503 * Fixed a fatal bug in silc_server_remove_clients_by_server. Do
504 not handle clients that has entry->data.registered == FALSE.
505 They are not in the network anymore. Affected file is
508 Tue Apr 3 16:39:19 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
510 * Implemented the sending of the SERVER_SIGNOFF notify in the
511 server. Affected file is silcd/server.c.
513 * Added silc_server_send_notify_args into silcd/packet_send.[ch].
514 Added also silc_notify_payload_encode_args into the
515 lib/silccore/silcnotify.[ch].
517 * Implemented ther SERVER_SIGNOFF notify handling in the server.
518 Affected file silcd/packet_receive.c.
520 * Implemented the SERVER_SIGNOFF notify handling in the client
521 library. Affected file lib/silcclient/client_notify.c. Also,
522 implemnted the printing of the SERVER_SIGNOFF info to the
523 application. Affected file silc/client_ops.c.
525 * The silc_idlist_del_server now returns TRUE or FALSE to indicate
526 if the deleting was successful. Affected file silcd/idlist.[ch].
528 * Added support for public key authentication in the connection
529 authentication protocol in the client library. Affected file
530 lib/silcclient/protocol.c.
532 * Changed the server's silc_idlist_get_clients_by_* interface
533 to support already allocated array so that new entries may be
534 added to pre-allocated array. Affected file silcd/idlist.[ch].
535 This fixes some bugs with WHOIS, WHOWAS and IDENTIFY commands
538 * All command reply functions in the server now calls the
539 pending command callback even if error occured. This way the
540 error will be delivered to the client as well. Affected files
541 silcd/command.c and silcd/command_reply.c.
543 * Fixed INFO command to return local server's info if no server
544 was provided. Affected file lib/silcclient/command.c.
546 * Removed RESTART command for good. Updated the code and the
549 * Rewrote parts of the task system. It is a bit simpler now.
550 Removed unsued task priorities. The affected files are
551 lib/silcutil/silctask.[ch].
553 Mon Apr 2 20:02:33 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
555 * Moved the USERS printing from the library to the application.
556 Affected files lib/silcclient/command.c and silc/client_ops.c.
558 Mon Apr 2 13:13:23 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
562 * Added channel key re-key support. The re-key is perfomed
563 only by the router and is done once in an hour. Added `rekey'
564 field to the SilcChannelEntry in the server. Affected files
565 silcd/server.c and silcd/idlist.h.
567 * Added silc_task_unregister_by_context into the file
568 lib/silcutil/silctask.[ch].
570 Sun Apr 1 19:49:34 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
572 * Added SILC_UMODE_GONE mode to indicate when the client is not
573 present in the SILC network. Added also support to the local
574 command AWAY that will set this mode. Added support of showing
575 "xxx is gone" in WHOIS command. The USERS command shows the
578 * Fixed setting server and router operator privileges in the
579 server's UMODE command. Affected file silcd/command.c.
581 * Merged the SKE KE1 and KE2 payloads into one payload. The
582 new KE payload is equivalent to the old KE2 payload.
584 Cleaned up the SKE Start Payload parsing. It now uses the
585 simple buffer unformatting to do the parsing. A lot faster
588 Added new Mutual Authentication flag (SILC_SKE_SP_FLAG_MUTUAL)
589 to the SKE that is used to indicate whether both of the SKE
590 parties should perform authentication. By default only the
591 responder performs authentication. By setting this flag also
592 the initiator must do authentication. By default it is unset
593 since in normal SKE case, client to server connection, only
594 the responder should do authentication. When doing SKE between
595 two clients both should perform authentication. Updated the
596 code and the protocol specs.
598 * A little fix to IDENTIFY command in the server. Search the
599 client first by hash not nickname. Affected file is
602 * Fixed the silc_client_close_connection to support closing
603 the client to client connections wihtout deleting too much
604 data. Affected file lib/silcclient/client.c.
606 * Fixed a fatal bug in server and client; if KE1 or KE2 packets
607 are received if protocol used to be active but is not anymore
608 the application would crash due to NULL pointer dereference.
609 Affected files silcd/server.c and lib/silcclient/client.c.
611 * Added `hash' field to the SilcClientConnection to include
612 the hash function negotiated in the SKE protocol.
614 * Added new channel mode SILC_CMODE_FOUNDER_AUTH that is used
615 to set the channel founder authentication data. A client can
616 claim the founder rights later by providing the authentication
617 data to the CUMODE command using SILC_CUMODE_FOUNDER mode.
618 This way the channel founder can regain the channel founder
619 privileges even it is left the channel. This works only on
620 local server and the client must be connected to the same
621 server to be able to regain the founder rights. Updated the
622 protocol specs accordingly.
624 Added support to the CMODE command in the client to set the
625 founder auth data. Read the README to see how to set it.
627 Added support to the CUMODE command to claim the founder
628 rights. Read the README to see how to do it.
630 Added support for the founder authentication to the Channel
631 Entry in the server. Affected file silcd/idlist.h.
633 Added support for the SILC_CMODE_FOUNDER_AUTH mode in the
634 server's CMODE command. Affected file silcd/command.c.
636 * Added the following new functions into lib/silccore/silcauth.[ch]:
637 silc_auth_get_method and silc_auth_get_data.
639 * The server now saves the remote hosts public key to the
640 SilcIDListData pointer. Affected file silcd/protocol.c.
642 * The normal server now does not remove the channel entry from
643 the cache if the founder authentication data is set. It used
644 to remove it if the founder was the last one on the channel on
645 the server and left the channel. The auth data is saved and
646 if the channel is re-joined later the old entry is used with
647 the old auth data. Affected files silcd/command_reply.c and
650 * Removed the `pkcs' field from the SilcIDListData structure
651 in the server; it is not used. Affected file silcd/idlist.h.
653 Sat Mar 31 15:38:36 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
655 * Fixed packet processing on slow links. Partial packets were
656 never re-processed because the incoming data buffer was cleared
657 by the application. Application must not directly clear the
658 sock->inbuf, the packet processing routines handle it. Fixed
659 this in client library and in server.
661 Fri Mar 30 16:35:27 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
663 * Fixed the WHOIS and IDENTIFY send reply function to really
664 check whether to send list or just one entry. Affected file
667 * Cleaned up the LEAVE command's channel key distribution. The
668 affected file silcd/command.c.
670 * Changed CMODE_CHANGE's <Client ID> to <ID Payload> as server
671 can enforce the channel mode as well. In that case the ID
672 includes the ID of the server. The code now enforces the
673 mode change if the router have different mode than the server.
675 * The notify client operation with CMODE_CHANGE notify can now
676 return NULL client_entry pointer if the CMODE was not changed
677 by client. Application must check for this.
679 * Added <Server ID> argument to INFO command to support server
680 info fetching by Server ID.
682 * Added silc_server_announce_get_channel_users to get assembled
683 packets of channel users of the specified channel. Affected
684 file silcd/server.[ch].
686 * Fixed bug in CHANNEL_CHANGE notify in the server. The new ID
687 was freed underneath the ID Cache.
689 * Re-announce clients when the server received CHANNEL_CHANGE
690 notify from the router. Affected file silcd/packet_send.c.
692 Thu Mar 29 19:10:28 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
694 * Fixed a fatal bug when client does /join 1 2 3 4 5 6 the server
695 crashed since it did not handle the fact that there is no cipher
696 called "3" and didn't check the error condition. Now fixed.
698 * Added SILC_MESSAGE_FLAG_REQUEST message flag as generic request
699 flag. It can be used to send message requests.
701 Thu Mar 29 12:26:25 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
703 * Implemented the RESTART command in the client.
705 * Added SILC_MESSAGE_FLAG_NOTICE message flag for informational
706 notice type messages. Added notice printing to the user
709 * The channel keys are not re-generated if the channel's mode
710 is PRIVKEY, ie private key on the channel exists. Affected
711 files silcd/server.c and silcd/command.c.
713 * Fixed a little bug in channel message delivery when channel
714 private keys are set in the server. Affected file is
717 * Changed the setting on channel->on_channel = TRUE from the
718 silc_client_save_channel_key to the JOIN command reply. The
719 key payload is not received if the private channel key is set.
720 Affected file lib/silcclient/command_reply.c and the
721 lib/silcclient/client_channel.c.
723 * When the CMODE_CHANGE notify is sent and the channel private
724 key mode is removed the channel key must be re-generated in
725 other cells as well. Added this support for the router in the
726 silcd/packet_receive.c.
728 * Added new local command NOTICE to send notice message on
729 channel. Affected file silc/local_command.[ch].
731 Wed Mar 28 23:55:54 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
733 * Added new local command ME to the client. It is used to send
734 message to a channel with SILC_MESSAGE_FLAG_ACTION to indicate
735 some action. Affected file silc/local_command.[ch].
737 * Changed channel_message and private_message client operations
738 to deliver the message flags to the application. Added also
739 the `flags' arguments to the silc_client_send_channel_message
740 and silc_client_send_private_message functions. Affected file
743 Wed Mar 28 20:50:47 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
745 * Redefined the Private Message Payload to support private message
746 keys and to support the new private message flags. Updated
747 the protocol specs. Flags makes it possible to have for example
750 * Added new type SilcPrivateMessagePayload and defined an API
751 for it in the lib/silcclient/silcprivate.[ch].
753 * Tested private message private keys successfully. Tested the
754 private message key set, unset and list commands with the new
757 * Redefined the Channel Message Payload to include the channel
758 message flags (equal with private message flags) to support
759 for example CTCP style messages.
761 * Defined some of the message (for channel and private message)
762 flags. Updated the protocol specs and added the flags to the
763 lib/silccore/silcchannel.h. The type is SilcMessageFlags.
765 Wed Mar 28 15:52:36 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
767 * Added SilcKeyAgreementStatus type to the key agreement routines
768 to indicate the current status and error if one occured.
769 The status types are defined in the lib/silcclient/silcapi.h.
771 * Added new local command KEY that is used to set and unset private
772 keys for channels, set and unset private keys for private messages
773 with remote clients and to send key agreement requests and
774 negotiate the key agreement protocol with remote client. The
775 key agreement is supported only to negotiate private message keys,
776 it currently cannot be used to negotiate private keys for channels,
777 as it is not convenient for that purpose.
779 * Fixed a minor pending callback setting bug in the function
780 silc_client_get_client_by_id_resolve, now the function works.
781 Affected file lib/silcclient/idlist.c.
783 * Added function silc_net_get_local_port to get local bound
784 port by socket. Added to lib/silcutil/silcnet.[ch].
786 * Added `sockets' and `sockets_count' fields to the SilcClient
787 object. They hold the sockets of the listenning sockets in
788 the client. Listenning sockets may be for example the key
789 agreement server. Affected file lib/silcclient/client.[ch].
790 Added functions the silc_client_add_socket and the
791 silc_client_del_socket. They are exported to the application
794 * Added ~./silc/clientkeys to support other client's public keys.
796 * Renamed verify_server_key client operation to verify_public_key
797 and added one argument to indicate the type of the connection
798 (server, client etc.).
800 Tue Mar 27 22:22:38 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
802 * Added silc_server_connection_auth_request to handle the
803 incoming CONNECTION_AUTH_REQUEST packet. Affected file is
804 silcd/packet_receive.[ch].
806 * Added silc_server_send_connection_auth_request into the
807 silcd/packet_send.c to send the connection auth request packet.
809 * Cleaned up the silcd/protocol.c a bit and fixed some memory
812 * Fixed the public key authentication in responder side in the
813 server. The `auth_data' pointer includes the SilcPublicKey
814 not the path to the public key. Affected file silcd/protocol.c.
816 * Implemented the public key authentication in the initiator side
817 in the server. Affected file silcd/protocol.c.
819 * Removed the [RedirectClient] config section from the server
820 configuration. Is not needed and I don't want to implement it.
822 Tue Mar 27 12:49:56 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
824 * Cleaned up the CMODE command in the server. It now works
825 correctly and supports all the modes defined in the protocol.
826 Affected file is silcd/command.c.
828 * Added `hmac_name' field to the SilcChannelEntry in the server
829 to hold the default HMAC of the channel. It can be set when
830 creating the channel (with JOIN command). Affected files
833 * Added <cipher> and <hmac> argument to the CMODE_CHANGE notify
834 type to indicate the change of the current cipher and hmac
835 on the channel. Client can safely ignore the <cipher> argument
836 (if it chooses to do so) since the CHANNEL_KEY packet will
837 force the channel key change anyway. The <hmac> argument is
838 important since the client is responsible of setting the new
839 HMAC and the hmac key into use.
841 * Fixed the CMODE command in the client library as well.
843 * Tested CMODE command in router environment successfully.
845 Mon Mar 26 14:39:48 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
847 * Show the version of the remote client (or server) when connecting
848 to the server. It is logged to the log file. Affected file
851 * Fixed the KILLED notify handling in the client library. The
852 client must be removed from all channels when receiving the
855 Also, do not remove the client entry when giving the KILL
856 command but when the KILLED notify is received.
858 * Removed silc_idlist_find_client_by_nickname from the server.
859 Not needed anymore. Affected files silcd/idlist.[ch].
861 * Implemented the CHANNEL_CHANGE notify type handling to the
862 server. Affected file silcd/server.c.
866 Mon Mar 26 12:11:14 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
868 * Added silc_server_send_notify_invite to send the INVITE
869 notify between routers.
871 * Implemented the INVITE command correctly to the server.
873 * Implemented the INVITE notify type handling in the server.
875 * Implemented the INVITE command to the client library and on the
878 Sun Mar 25 20:27:09 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
880 * Added function silc_server_get_client_resolve to find the
881 client entry by ID from all ID lists and then resolve it
882 (using WHOIS) if it cannot be found. Affected file is
885 Sun Mar 25 13:52:51 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
887 * Implemented the BAN command to the client library.
889 * The JOIN command in the server now checks the invite list
892 * Changed the silc_command_reply_payload_encode_va and the
893 silc_command_payload_encode_va to support that if argument is
894 NULL it ignores and checks the next argument. Affected file
895 lib/silccore/silccommand.c.
897 * Added silc_server_send_notify_ban to send the BAN notify
898 type between routers.
900 * Chaned the silc_notify_payload_encode to support that if
901 argument is NULL it ignores and checks the next argument.
902 Affected file lib/silccore/silcnotify.c.
904 * Tested ban lists in router environment successfully.
906 Sat Mar 24 14:47:25 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
908 * Implemented BAN command to the server, in silcd/command.[ch].
910 * Removed the BAN and INVITE_LIST modes from the CMODE command
913 * Added function silc_string_match to regex match two strings.
914 Affected files lib/silcutil/silcutil.[ch].
916 Fri Mar 23 22:02:40 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
918 * Redefined parts of the SilcChannelEntry in the server to support
919 the new ban and invite lists.
921 Fri Mar 23 16:25:11 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
923 * Redefined the INVITE command. The same command can be used to
924 invite individuals to the channel but also to manage the invite
925 list of the channel (to add to and remove from the invite list).
926 Updated the protocol specs.
928 * Added new command SILC_COMMAND_BAN that can be used to manage
929 the ban list of the channel. Updated the protocol specs.
931 * Removed the channel modes: the SILC_CMODE_BAN and the
932 SILC_CMODE_INVITE_LIST as they were a bit kludge to be included
933 in the CMODE command. The equivalent features are now available
934 using INVITE and BAN commands. Updated the protocol specs.
936 * Added new SILC_NOTIFY_TYPE_BAN notify type to notify routers
937 in the network about change in the current ban list. The notify
938 type is not used by the client.
940 * Redefined parts of the SILC_NOTIFY_TYPE_INVITE command to
941 support the invite lists.
943 Thu Mar 22 22:52:23 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
945 * Added new function silc_string_regexify that converts string
946 including wildcard characters into regex string that can
947 be used by the GNU regex library. Added into the file
948 lib/silcutil/silcutil.[ch].
950 Added silc_string_regex_combine to combine to regex strings
951 into one so that they can be used as one regex string by
952 the GNU regex library. Added into the file
953 lib/silcutil/silcutil.[ch].
955 Added silc_string_regex_match to match two strings. It returns
956 TRUE if the strings match. Added into lib/silcutil/silcutil.[ch].
958 Thu Mar 22 15:29:42 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
960 * Imported GNU regex to the soruce tree into lib/contrib.
961 Fixed some compiler warning from the regex.c.
963 Wed Mar 21 15:27:58 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
965 * Fixed MOTD command in the server to work in router environment.
967 * Fixed the MOTD command in the client library to support
968 the server argument in the command.
970 * Added `nickname_len' argument to the silc_idlist_add_client
971 in the server, as the `nickname' argument may be binary data
974 * Added silc_idlist_get_channels to return all channels from
977 * Implemented LIST command to the server. Affected file is
980 * Implemented the LIST command to the client library and on the
983 * Added [<user count>] argument to the LIST command reply.
984 With private channels the user count is not shown.
986 * Updated TODO and README.
988 Tue Mar 20 21:05:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
990 * The client entry's data.registered must be TRUE even with
991 global client entry on global client list. The data.registered
992 is used to check whether the client is anymore in the network,
993 for example with WHOWAS command so it must be valid.
995 * Fixed the WHOWAS command in the server. It now actually works
996 in router environment. Added function into silcd/command_reply.c
997 silc_server_command_reply_whowas_save.
999 * Added silc_idlist_purge function to the silcd/idlist.c
1000 to periodically purge the ID Cache.
1002 * Fixed INFO command in the server. It works now in router
1003 environment. Added <server name> argument to the INFO command
1004 reply. Updated the protocol specs.
1006 * Fixed minor bug in silc_idcache_purge to not purge if the
1007 expire value is zero.
1009 * Fixed various bugs in WHOIS and IDENTIFY command handling as
1010 they were buggy because of the WHOWAS information.
1012 * Fixed local command MSG to handle the async resolving of
1013 the remote client properly. It used to fail the first MSG.
1014 Affected file silc/local_command.c.
1016 * Added `data_len' field to SilcIDCache context.
1018 Tue Mar 20 16:29:00 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1020 * Update TODO. Todo in commands in the server.
1022 Tue Mar 20 15:45:14 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1024 * Added new notify type SILC_NOTIFY_TYPE_UMODE_CHANGE that is
1025 used by routers as broadcast packet to inform other routers
1026 about the changed user mode.
1028 Implemented the notify handling in the server. Affected file is
1029 silcd/packet_receive.c. Added the function
1030 silc_server_send_notify_umode to the silcd/packet_send.[ch].
1032 * Added new generic Channel Payload and deprecated the New Channel
1033 Payload. The New Channel Payload is now the generic Channel
1036 * Added new argument `mode' to the silc_server_send_new_channel
1037 as it is required in the Channel Payload now.
1039 * Renamed the SilcChannelPayload to SilcChannelMessagePayload
1040 and created a new and real SilChannelPayload to represent the
1041 new generic Channel Payload. Implemented the encode/decode
1042 for Channel Payload. Affected file lib/silccore/silcchannel.[ch].
1044 * Added silc_server_get_client_channel_list to return the list
1045 of channels the client has joined for WHOIS command reply.
1046 Affected file silcd/server.[ch].
1048 * Implemented the channel list sending in the WHOIS command reply
1049 in server and in the client.
1051 Implemented the channel list displaying on the user interface
1052 as well. Affected file silc/client_ops.c.
1054 * Added silc_channel_payload_parse_list to parse list of Channel
1055 Payloads. It returns SilcDList list of SilcChannelPayloads.
1056 Client for example can use this function to parse the list of
1057 channels it receives in the WHOIS command reply. The caller
1058 must free the list by calling silc_channel_payload_list_free.
1059 Affected files lib/silccore/silcchannel.[ch].
1061 Mon Mar 19 21:39:15 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1063 * Added one new argument <user mode> to the WHOIS command reply
1064 to return the mode of the user in SILC. Updated the protocol
1067 Implemented it to the server and client.
1069 Mon Mar 19 18:43:06 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1071 * Fixed the mode printing on the user interface on joining.
1072 Affected file silc/client_ops.c.
1074 * Implemented the UMODE command and user modes in general to the
1075 client library and to the user interface.
1077 * Implemented the UMODE command to the server.
1079 * The server now sends UNKNOWN_COMMAND error status if client sends
1080 unknown command. Affected file silcd/command.c.
1082 * All server commands now handle the command identifier the right
1083 way when sending the command reply to the client. The client can
1084 use to identify the command replies with the identifier.
1086 Mon Mar 19 16:13:07 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1088 * Added silc_server_get_client_route to resolve the route to
1089 the client indicated by the client ID. Affected file is
1092 * Added silc_server_relay_packet as general function to relay
1093 packet to arbitrary destination. This deprecates functions
1094 like _send_private_message_key, _relay_notify etc. Affected
1095 file is silcd/packet_send.[ch].
1097 Removed silc_server_send_key_agreement,
1098 silc_server_send_private_message_key and
1099 silc_server_packet_relay_notify functions from the file
1100 silcd/packet_send.[ch].
1104 * Implemented the SILC_NOTIFY_TYPE_KILLED notify handling in the
1105 server. Affected file silcd/packet_receive.[ch].
1107 * Implemented the KILL command to the client. Implemented the
1108 SILC_NOTIFY_TYPE_KILLED notify handling in the client library.
1109 Affected files lib/silcclient/command[_reply].c and
1110 lib/silcclient/client_notify.c. Implemented the KILL notify
1111 printing in the user inteface.
1113 * Fixed a lot silc_parse_nick memory leaks from the client
1114 library in the file lib/silcclient/command.c.
1116 * Changed the silc_server_send_notify_on_channels's `sender'
1117 argument from SilcSocketConnection to SilcClientEntry to
1118 check the sender as entry and not as connection object and not
1119 to send to the client provided as argument. The affected file
1120 is silcd/packet_send.[ch].
1122 * The notify packets that are destined directly to the client used
1123 to not to be processed by the server. Now changed that and the
1124 server processes all notify packets. After relaying the packet
1125 to the client the notify packet is processed in the server.
1127 * The silc_server_free_client_data now checks whether there is
1128 pending outgoing traffic for the client and purges the data to
1129 the network before removing the client entry.
1131 Sun Mar 18 21:02:47 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1133 * Added SILC_NOTIFY_TYPE_KILLED notify type. It is sent when
1134 an client is killed from the SILC Network. Updated the protocol
1137 Added new function silc_server_send_notify_killed to the
1138 silcd/packet_send.[ch].
1140 * Added function silc_server_packet_relay_notify to relay notify
1141 packets that are destined directly to a client. In this case
1142 the server does not process the notify packets but merely relays
1143 it to the client. Affected file silcd/packet_send.[ch].
1145 Added also silc_server_packet_process_relay_notify to check
1146 whereto relay the notify. Affected file is
1147 silcd/packet_receive.[ch].
1149 * Implemented the KILL command to the server.
1153 * Added the backup schema desgined last fall to the protocol
1154 specs for everyone to see. The specification is in the
1155 *-spec-xx.txt draft and the packet type definitions for the
1156 backup routers is in *-pp-xx.txt draft. Thusly, added also
1157 new packet type SILC_PACKET_CELL_ROUTERS.
1159 * A big security problem in the implementation discovered. The
1160 signoff of an client did not cause new channel key generation
1161 which it of course should've done. The channel keys must be
1162 always re-generated when client leaves (or signoffs) the channel.
1163 The silc_server_remove_from_channels funtion now handles
1164 the channel key re-generation.
1166 * Added `sender' argument to the silc_server_send_notify_on_channels
1167 to not to send the client provided as argument. Affected file
1168 silcd/packet_send.[ch].
1170 Fri Mar 16 15:52:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1172 * Implemented OPER and SILCOPER commands into the server and
1175 * Added silc_auth_verify and silc_auth_verify_data to verify
1176 the authentication directly from the authentication payload.
1177 It supports verifying both passphrase and public key based
1178 authentication. Affected file lib/silccore/silcauth.[ch].
1180 * Added `hash' field to the SilcIDListData structure. It is the
1181 hash negotiated in the SKE protocol. Affected file is
1184 * Slight redesigning of the SilcAuthPayload handling routines.
1185 Do not send SilcPKCS but SilcPublicKey as argument.
1187 * Implemented the public key authentication support to the
1188 serverconfig. The public key is loaded from the provided path
1189 and saved as authentication data to void * pointer. Thus,
1190 changed the unsigned char *auth_data to void *auth_data;
1192 * Fixed SHUTDOWN command to send the reply before the server
1193 is shutdown. :) Affected file silcd/command.c.
1195 * Fixed fatal bug in CONNECT command. The hostname was invalid
1196 memory and server crashed. Affected file silcd/command.c.
1198 * Fixed fatal bug in CLOSE command. The server_entry became
1199 invalid but was referenced later in the command. Affected file
1202 Thu Mar 15 12:46:58 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1204 * Fixed fatal bug in failure packet handling. Server ignored
1205 the failure and thus crashed when it came.
1209 Wed Mar 14 20:37:35 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1211 * Added new SILC_CF_LAG_STRICT command flag that strictly forces
1212 that the command may be executed only once in (about) 2 seconds.
1213 The old SILC_CF_LAG flag is same but allows command bursts up
1214 to five before limiting.
1216 Added the support for CF_LAG and CF_LAG_STRICT flags to the
1217 server code. Various commands now includes the CF_LAG_STRICT
1218 flag to disallow any kind of miss-use of the command.
1220 * Fixed the silc_buffer_unformat to not to allocate any data
1221 if the length of the data is zero. It used to allocate the
1222 length + 1. Affected file lib/silcutil/silcbuffmt.c.
1224 Wed Mar 14 16:10:30 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1226 * Changed the format of AdminConnection configuration section
1227 in the server. Added username of the admin to the format.
1228 Affected files silcd/serverconfig.[ch].
1230 Added silc_server_config_find_admin into silcd/serverconfig.[ch]
1231 to return admin configuration data by host, username and/or
1234 Wed Mar 14 13:18:16 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1236 * Implemented WHOWAS command to the server. Added the functions:
1238 silc_server_command_whowas_parse,
1239 silc_server_command_whowas_send_reply,
1240 silc_server_command_whowas_from_client and
1241 silc_server_command_whowas_from_server
1243 * Added <Client ID> argument to the WHOWAS command reply. Updated
1244 the protocol specs accordingly.
1246 * Implemented WHOWAS command and command_reply to the client
1249 Implemented the WHOWAS printing on the user interface.
1251 Tue Mar 13 22:17:34 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1253 * Added new argument to the WHOWAS command reply, the real name.
1254 It is an optional argument. Updated the protocol specs.
1256 * Added SilcIDCacheDestructor callback that is registered when
1257 the SilcIDCache is allocated. The callback is called when
1258 an cache entry in the ID Cache expires, or is purged from the
1259 cache. Added into lib/silccore/idcache.[ch].
1261 Added silc_idlist_client_destructor to the silcd/idlist.[ch]
1262 to destruct the client entries when the cache entry expires.
1263 Other ID Cache's in server and in the client library ignores
1266 * If the ID Cache entry's `expire' field is zero then the entry
1267 never expires. Added boolean `expire' argument to the
1268 silc_idcache_add function in the lib/silccore/idcache.[ch].
1269 If it is TRUE the default expiry value is used.
1271 * Added silc_server_free_client_data_timeout that is registered
1272 when client disconnects. By default for 5 minutes we preserve
1273 the client entry for history - for WHOWAS command.
1275 Tue Mar 13 13:26:18 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1277 * Added support to the server to enforce that commands are not
1278 executed more than once in 2 seconds. If server receives
1279 commands from client more frequently, timeout is registered
1280 to process the commands. Affected file silcd/command.c.
1281 Added new function silc_server_command_process_timeout.
1283 * Changed NICK_NOTIFY handling in client library to check that
1284 if the client's nickname was changed, so there is no need to
1285 resolve anything from the server.
1287 * Removed error printing from the WHOIS and IDENTIFY commands.
1288 If error occurs then it is ignored silently in the client library.
1289 The application, however, may map the received error to
1290 human readable error string. The application currently maps
1291 the NO_SUCH_NICKNAME error to string.
1293 * Made the command status message public to the application. Moved
1294 them from lib/silcclient/command_reply.c to
1295 lib/silcclient/command_reply.h. The application can map the
1296 received command status to the string with the
1297 silc_client_command_status_message function.
1299 * Added check to the server to check that client's ID is same
1300 as the Source ID in the packet the client sent. They must
1303 Tue Mar 13 12:49:21 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1305 * Added dist-bzip hook to the Makefile.am to make bzip2
1306 compressed distributions.
1308 Mon Mar 12 18:43:38 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1310 * Server now enforces the maximum length for the nickname and
1311 the channel as protocol specification dictates. 128 bytes for
1312 nickname and 256 bytes for channel name.
1314 * Moved the WHOIS printing to the application. The client libary
1315 does not print out the WHOIS information anymore, the application
1316 must do it. Renamed silc_client_command_reply_whois_print to
1317 the silc_client_command_reply_whois_save.
1319 The client's idle time is also sent to the application now, and
1320 the idle is shown on screen.
1322 * Added silc_client_command_reply_identify_save to save the
1323 received IDENTIFY entries.
1325 * Do not check for channel private keys in message sending and
1326 reception if the channel does not have the PRIVKEY mode set.
1327 Affected file lib/silclient/client_channel.c.
1329 Sun Mar 11 20:25:06 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1331 * Fixed a minor bug if WHOIS and IDENTIFY command parsing that
1332 just surfaced after chaning the JOIN procedure.
1334 Sun Mar 11 14:59:05 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1336 * Added silc_client_get_clients_by_list to get client entries
1337 from Client ID list, that is returned for example by JOIN
1338 and USERS command replies. The application should use this
1339 function for example when JOIN command reply is received to
1340 resolve the clients already on the channel (library does not
1341 do that anymore as USERS command reply is not used in the JOIN
1342 procedure anymore). Affected files lib/silcclient/silcapi.h and
1343 lib/silcclient/idlist.c.
1345 * JOIN command reply and USERS command reply returns now SilcBuffer
1346 pointers instead of unsigned char pointers when returning
1347 the client list and mode list.
1349 * Added <Client ID> argument to the JOIN command reply, mainly
1350 for the server to identify for which client the command was
1351 originally sent. Updated protocol specs accordingly.
1353 * Added SilcDlist private_key pointer to the SilcChannelEntry
1354 in the client to support the channel private keys. Affected
1355 file is lib/silcclient/idlist.h.
1357 * Added SilcChannelPrivateKey argument to the function
1358 silc_client_send_channel_message so that application can choose
1359 to use specific private ke if it wants to. If it is not provided,
1360 the normal channel key is used, unless private keys are set.
1361 In this case the first (key that was added first) is used
1362 as the encryption key.
1364 * Implemented the support for channel private key handling.
1365 Implemented the following functions:
1367 silc_client_add_channel_private_key,
1368 silc_client_del_channel_private_keys,
1369 silc_client_del_channel_private_key,
1370 silc_client_list_channel_private_keys and
1371 silc_client_free_channel_private_keys
1373 Affected file lib/silcclient/client_channel.c.
1375 * Added the support for the private keys in the channel message
1376 sending and encryption and in the message reception and
1377 decryption. Affected funtions are
1378 silc_client_send_channel_message and silc_client_channel_message.
1380 Sat Mar 10 21:36:22 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1382 * Added SKE's key verify callback to the client library's
1383 KE protocol context. Affected files lib/silcclient/protocol.[ch].
1385 * Removed the statement that server (or router) must send USERS
1386 command reply when joining to the channel so that the client
1387 knows who are on the channel. Instead, the client list and
1388 client's mode list is now sent in the JOIN command reply to the
1389 client who joined channel. This is better solution.
1391 * Added function silc_server_get_users_on_channel and function
1392 silc_server_save_users_on_channel to the silcd/server.[ch].
1394 * Removed function silc_server_command_send_users from the
1397 * Do not show topic on the client library anymore. The topic is
1398 sent in the command reply notify to the application and the
1399 application must show the topic now.
1401 Sat Mar 10 00:07:37 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1403 * Added client searching by nickname hash into the IDENTIFY and
1404 WHOIS commands in the server as they were clearly missing from
1405 them. Affected file is silcd/command.c.
1407 * Fixed a bug in private message receiving in the client library.
1408 The remote ID was freed and it wasn't supposed, now it is
1411 Fri Mar 9 12:40:42 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1413 * Minor fix to the channel payload; allocate the data area, as it
1414 needs to be of specific length.
1416 * If the key agreement port is zero then the operating
1417 system will define the bound port. Affected files are
1418 lib/silcclient/silcapi.h and lib/silcclient/client_keyagr.c.
1420 * Added new function silc_channel_payload_decrypt into the file
1421 lib/silccore/silcchannel.[ch].
1423 * Moved the channel message etc, check from silc_packet_decrypt
1424 to applications. The library calls now a generic
1425 SilcPacketCheckDecrypt callback which is to return TRUE or FALSE
1426 when the packet is either normal or special. This was done to
1427 allow more wide range of checking that was not allowed when
1428 the code was in library. Now applications can do virtually any
1429 checks to the packet and return to the library the decision how
1430 the packet should be processed. Affected files are
1431 lib/silccore/silcpacket.[ch].
1433 Added silc_server_packet_decrypt_check to the server and
1434 silc_client_packet_decrypt_check to the client library.
1436 * Added silc_server_packet_send_srcdest into silcd/packet_send.[ch]
1437 to send with specified source and destination information.
1439 * Channel message delivery between routers was broken after the
1440 channel key distribution was fixed earlier. The channel key
1441 was used be to distributed to other routers as well which is not
1442 allowed by the protocol. Now this is fixed and channel keys
1443 really are cell specific and the channel message delivery between
1444 routers comply with the protocol specification.
1446 * Fixed various commands in server to check also the global list
1447 for the channel entry and not just the local list. The affected
1448 file silcd/command.c.
1450 Thu Mar 8 21:39:03 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1452 * Added assert()s to buffer formatting and unformatting routines
1453 to assert (if --enable-debug) when error occurs. Affected
1454 file: lib/silcutil/silcbuffmt.c.
1456 * Changed to auto-reconnect to check whether the remote host is
1457 router and register the re-connect timeout if it is. It used
1458 to check that whether we are normal server, but router must do
1459 auto-reconnect with another router as well. Affected file
1462 * Removed the [<key len>] option from CMODE command as the cipher
1463 name decides the key length, nowadays. See the defined ciphers
1464 from the protocol specification.
1466 * Added [<hmac>] option to the CMODE command to define the HMAC
1467 for the channel. Added SILC_CMODE_HMAC channel mode.
1469 * Added [<hmac>] option for the JOIN command so that user can
1470 select which HMAC is used to compute the MACs of the channel
1473 * Added Hmac field to the Channel Message Payload. The integrity
1474 of plaintext channel messages are now protected by computing
1475 MAC of the message and attaching the MAC to the payload. The
1476 MAC is encrypted. Now, it is clear that this causes some
1477 overhead to the size of the packet but rationale for this is that
1478 now the receiver can verify whether the channel message decrypted
1479 correctly and also when private keys are set for the channel the
1480 receiver can decrypt the packet with several keys and check from
1481 the MAC which key decrypted the message correctly.
1483 * Added silc_cipher_encrypt and silc_cipher_decrypt into the
1484 lib/silccrypt/silccipher.[ch].
1486 * Added silc_hash_len to return the digest length into the
1487 lib/silcrypt/silchash.[ch].
1489 * Rewrote parts of Silc Channel Payload interface in the
1490 lib/silccore/silcchannel.[ch]. The encode function now also
1491 encrypts the packet and parse function decrypts it.
1493 Wed Mar 7 20:58:50 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1495 * Fixed a minor formatting bug in the SKE's key material processing.
1496 It actually might have processed the keys wrong way resulting
1499 * Redefined the mandatory HMAC algorithms and added new algorithms.
1500 Added hmac-sha1-96 and hmac-md5-96 which are normal hmac-sha1
1501 and hmac-md5 truncated to 96 bits. The mandatory is now
1502 hmac-sha1-96. Rest are optional (including the one that used
1503 to be mandatory). Rationale for this is that the truncated HMAC
1504 length is sufficient from security point of view and can actually
1505 make the attack against the HMAC harder. Also, the truncated
1506 HMAC causes less overhead to the packets. See the RFC2104 for
1509 * Added new [hmac] configuration section. The SKE used to use
1510 the hash names (md5 and sha1) in the SKE proposal as HMCAS which
1511 is of course wrong. The official names that must be proposed in
1512 the SKE are the ones defined in the protocol specification
1513 (hmac-sha1-96 for example). The user can configure any hmac
1514 using any hash function configured in the [hash] section. At
1515 least, the mandatory must be configured.
1517 Rewrote the HMAC interface in lib/silccrypt/silchmac.[ch].
1519 * Added HMAC list to the SKE proposal list. It has now both
1520 hash algorithm list and HMAC list. This makes the protocol
1521 incompatible with previous versions. The SKE now seems to work
1522 the way it is supposed to work, for the first time actually.
1524 * Defined plain Hash algorithms to the protocol specification.
1527 Tue Mar 6 15:36:11 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1529 * Implemented support for key agreement packets into the server.
1530 Added functions silc_server_key_agreement and
1531 silc_server_send_key_agreement. Other than these functions,
1532 server has nothing to do with this packet.
1534 * Added support for private message key packets into the server.
1535 Added functions silc_server_private_message_key and
1536 silc_server_send_private_message_key.
1540 * Changed the silc_[client|server]_protocol_ke_set_keys to be
1541 called in the protocol's final callback instead in the END
1542 protocol state. This makes a little more sense and in the same
1543 time in client we can use the same protocol routines for normal
1544 key exchange and to key agreement packet handling as well.
1546 * Added to both client's and server's KE protocol context the
1547 SilcSKEKeyMaterial pointer to save the key material. We will
1548 bring the key material to the protocol's final callback by doing
1549 this. The final callback must free the key material.
1551 * Added SKE's packet_send callback into client's KE protocol
1552 context so that the caller can choose what packet sending function
1553 is used. This way we can use different packet sending when
1554 doing normal SKE when doing key agreement packet handling (in
1555 the key agreement packet handling we do not want to encrypt
1558 * Implemented the responder side of the key agreement routines
1559 in the client. The client can now bind to specified port and
1560 accept incoming key negotiation. The key material is passed
1561 to the application after the protocol is over.
1563 * Implemented the processing of incoming Key Agreement packet
1564 in the client. Added function silc_client_key_agreement to
1567 * Implemented the intiator side of the key agreement routines
1568 in the client. The client can now initiate key agreement with
1569 another remote client. The key material is passed to the
1570 application after the protocol is over.
1572 * Created client_keyagr.c to include all the key agreement
1575 * Added macro SILC_TASK_CALLBACK_GLOBAL which is equal to the
1576 SILC_TASK_CALLBACK except that it is not static.
1578 * Created client_notify.c and moved the Notify packet handling
1579 from the client.[ch] into that file.
1581 * Created client_prvmsg.c and moved all private message and
1582 private message key routines from the client.[ch] into that file.
1584 * Create client_channel.c and moved all channel message and
1585 channel private key routines from the client.[ch] into that file.
1587 * Changed silc_client_get_client_by_id_resolve to resolve with
1588 WHOIS command instead of IDENTIFY command, in the file
1589 lib/silclient/idlist.c.
1591 Mon Mar 5 18:39:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1593 * Implemented the SKE's responder side to the Client library.
1595 * When FAILURE is received to the protocol do not trust it
1596 blindly. Register a timeout to wait whether the remote closes
1597 the connection as it should do it, only after that process the
1598 actual failure. This was changed to both client and server.
1600 * Added client_internal.h to include some of the structures
1601 there instead of client.h in lib/silcclient/.
1603 * Added function silc_task_unregister_by_callback to unregister
1604 timeouts by the callback function.
1606 Sat Mar 3 19:15:43 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1608 * Some "Incomplete WHOIS info" errors has been appearing on the
1609 log files. Took away the entry->userinfo check from WHOIS
1610 reply sending. The entry->userinfo is now " " if client did not
1611 provide one. I thought this was fixed earlier but something
1612 is wrong still. Let's see if the error still appears.
1614 Wed Feb 28 20:56:29 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1616 * Fixed a minor bug in the login when the channel key is
1617 re-generated in the server. It used to generate the key in
1618 wrong order and thus caused problems in the channel traffic.
1620 * Fixed a minor bug in channel key distsribution after
1621 KICK command. The key was not sent to the router even though
1624 Tue Feb 27 20:24:25 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1626 * Added silc_ske_process_key_material_data as generic routine
1627 to process any key material as the SILC protocol dictates. The
1628 function is used by the actual SKE library but can be used by
1629 applications as well. This relates to the private message keys
1630 and the channel private keys since they must be processed the
1631 same way the normal SILC session keys. The protocol dictates
1632 this. Affected files: lib/silcske/silcske.[ch].
1634 Added also silc_ske_free_key_material to free the
1635 SilcSKEKeyMaterial structure.
1637 * Defined silc_cipher_set_key function to set the key for
1638 cipher without using the object's method function. The affected
1639 files: lib/silccrypt/silccipher.[ch].
1641 * Implemented silc silc_client_add_private_message_key,
1642 silc_client_add_private_message_key_ske,
1643 silc_client_del_private_message_key,
1644 silc_client_list_private_message_keys and
1645 silc_client_free_private_message_keys functions in the
1648 Added functions silc_client_send_private_message_key to send
1649 the Private Message Key payload and silc_client_private_message_key
1650 to handle incoming Private Message Key payload.
1652 * Added Cipher field to the Private Message Key payload to set
1653 the cipher to be used. If ignored, the default cipher defined
1654 in the SILC protocol (aes-256-cbc) is used.
1656 Tue Feb 27 13:30:52 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1658 * Removed lib/silcclient/ops.h file.
1660 Redefined parts of the SILC Client Library API. Created new
1661 file silcapi.h that deprecates the ops.h file and defines the
1662 published Client Library API. Defined also private message key
1663 API and channel private key API into the file.
1665 This is the file that the application must include from the
1666 SILC Client Library. Other files need not be included by
1667 the application anymore.
1669 * Added new key_agreement client operation callback and also
1670 defined the Key Agreement library API for the application.
1672 Tue Feb 27 11:28:31 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1674 * Added new packet type: SILC_PACKET_KEY_AGREEMENT. This packet
1675 is used by clients to request key negotiation between another
1676 client in the SILC network. If the negotiation is started it
1677 is performed using the SKE protocol. The result of the
1678 negotiation, the secret key material, can be used for example
1679 as private message key.
1681 Implemented the Key Agreement payload into the files
1682 lib/silccore/silauth.[ch].
1684 Mon Feb 26 12:13:58 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1686 * Redefined ciphers for the SILC protocol. Added some new ciphers
1687 and defined the key lengths for the algorithms. Changed the
1688 code accordingly. The default key length is now 256 bits.
1690 * Fixed SKE key distribution function silc_ske_process_key_material
1691 when the key length is more than 128 bits. The default key
1692 length in SILC is now 256 bits.
1694 * Added new command status type: SILC_STATUS_ERR_UNKOWN_ALGORITHM
1695 to indicate unsupported algorithm.
1697 * Renamed rijndael.c to aes.c and all functions as well.
1699 * Fixed a long standing channel key setting bug in client library.
1700 Weird that it has never surfaced before.
1702 * Fixed bug in channel deletion. If the entire channel is removed
1703 then it must also delete the references of the channel entry
1704 from the client's channel list as the client's channel entry and
1705 the channel's client entry share same memory.
1707 Sun Feb 25 20:47:29 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1709 * Implemented CONNECT and SHUTDOWN commands in the client.
1711 * Implemented CLOSE command to the client.
1713 * Added the function silc_idlist_find_server_by_name into the
1714 files silcd/idlist.[ch].
1716 Added the function silc_idlist_find_server_by_conn into the
1717 files silcd/idlist.[ch].
1719 Sat Feb 24 23:45:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1721 * DIE command was renamed to SHUTDOWN. Updated the both code
1724 * Defined SILC_UMODE_NONE, SILC_UMODE_SERVER_OPERATOR and
1725 SILC_UMODE_ROUTER_OPERATOR modes into lib/silccore/silcmode.h.
1727 * Implemented CONNECT, CLOSE and SHUTDOWN commands to the server
1730 * Added function silc_server_create_connection function to create
1731 connection to remote router. My server implementation actually
1732 does not allow router to connect to normal server (it expects
1733 that normal server always initiates the connection to the router)
1734 so the CONNECT command is only good for connecting to another
1737 Sat Feb 24 16:03:45 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1739 * Added SILC_NOTIFY_TYPE_KICKED to indicate that the client
1740 or some other client was kicked from the channel.
1742 Implemented the handling of the notify type to both client
1745 Implemented silc_server_send_notify_kicked to send the KICKED
1746 notify. It is used to send it to the server's primary router.
1748 * Implemented the KICK command into server and client.
1750 * Added `query' argument to the silc_idlist_get_client function
1751 to indicate whether to query the client from server or not if
1754 * Added new command status type SILC_STATUS_ERR_NO_CHANNEL_FOPRIV
1755 to indicate that the client is not channel founder.
1759 Sat Feb 24 00:00:55 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1761 * Removed the rng context from SilcPacketContext structure and
1762 changed that the packet routine uses the Global RNG API.
1764 Fri Feb 23 11:22:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1766 * Added support for quit message that client can "leave" on the
1767 channel when it quits the SILC. It is ditributed inside the
1768 SILC_NOTIFY_TYPE_SIGNOFF notify type.
1770 Added silc_server_free_client_data that will take the
1771 signoff message as argument.
1773 * Changed SKE routines to use the silc_pkcs_sign/verify routines.
1775 Thu Feb 22 23:05:36 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1777 * Updated parts of the protocol specification to keep it up
1780 Thu Feb 22 15:08:20 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1782 * Added List flag (SILC_PACKET_FLAG_LIST) to indicate list of
1783 payloads in one packet.
1785 * Deprecated following packet types: NEW_ID_LIST, NEW_CHANNEL_LIST,
1786 NEW_CHANNEL_USER_LIST, SET_MODE and SET_MODE_LIST. List packets
1787 use now the new List flag.
1789 * Also deprecated the following packet types: REPLACE_ID,
1790 NEW_CHANNEL_USER and REMOVE_CHANNEL_USER packet types.
1792 * Added list support for Notify packet in server.
1794 * Added silc_server_send_notify_channel_change to send the
1795 CHANNEL_CHANGE notify type to replace channel ID's. Deprecates
1796 the silc_server_send_replace_id.
1798 * Added silc_server_send_notify_nick_change to send the
1799 NICK_CHANGE notify type. Deprecates the function
1800 silc_server_send_replace_id.
1802 * Added silc_server_send_notify_join to send the JOIN notify type.
1803 Deprecates the function silc_server_send_new_channel_user.
1805 * Added silc_server_send_notify_leave to send LEAVE notify type.
1806 Deprecates the function silc_server_send_remove_channel_user.
1808 * Added silc_server_send_notify_cmode and
1809 silc_server_send_notify_cumode to send CMODE and CUMODE notify
1810 types. Deprecates the silc_server_send_set_mode function.
1812 * Added SERVER_SIGNOFF notify type to indicate that server has
1813 quit. This means that all clients on the channel from that
1814 server will drop. This can be also used when netsplit happens.
1816 Deprecated REMOVE_ID packet type since it is not needed anymore
1819 Added silc_server_send_notify_server_signoff to send the
1820 SERVER_SIGNOFF notify type. Deprecates the function
1821 silc_server_send_remove_id.
1823 Added also silc_server_send_notify_signoff to send the
1824 SIGNOFF notify type.
1826 * Employed the PKCS #1. It is the mandatory way to do RSA in the
1827 SILC protocol from this day on. Changed the protocol
1828 specification as well.
1830 * Added silc_server_send_notify_topic_set to send TOPIC_SET
1831 notify type. It is used between routers to notify about
1832 topic changes on a channel.
1834 * Added silc_id_dup into lib/silccore/id.[ch] to duplicate
1837 * Partly updated the protocol specification to comply with the
1838 changes now made. It is still though a bit outdated.
1840 * The JOIN notify type now takes one extra argument <Channel ID>.
1841 The packet used to be destined to the channel but now the
1842 JOIN type may be sent as list thus it is impossible to
1843 destine it to any specific channel. By adding this argument
1844 it is again possible.
1846 Wed Feb 21 22:39:30 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1848 * Added CREDITS file. The CHANGES and CREDITS file will appear
1849 in the distribution as well.
1851 Wed Feb 21 14:17:04 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1853 * Implemented CMODE_CHANGE, CUMODE_CHANGE and TOPIC_SET notify
1854 types in the server's silcd/packet_receive.c.
1856 * Implemented CMODE and CUMODE to work in router environment.
1858 * Fixed minor encoding and decoding buglet from the
1859 lib/silccore/silcmode.c.
1861 * Fixed buffer overflow from lib/silcclient/command.c in USERS
1864 Wed Feb 21 12:44:00 EET 2001 Mika Boström <bostik@lut.fi>
1866 * Changed all SilcConfigServer* and silc_config_server* to
1867 SilcServerConfig* and silc_server_config*, respectively.
1870 Wed Feb 21 00:10:00 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1872 * Associated the ID (client or server ID) to the Authentication
1873 Payload to avoid any possibility of forging. Updated the
1874 protocol specification and the code accordingly.
1876 Tue Feb 20 14:14:14 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1878 * The RSA key length is now save to the RsaKey context in the
1879 key generation process in lib/silccrypt/rsa.c. The key length
1880 is now used to figure out the maximum size of the block allowed
1881 to be encrypted/signed.
1883 * Added silc_mp_mp2bin_noalloc into lib/silcmath/mpbin.[ch]. It
1884 is equivalent to the silc_mp_mp2bin but does not allocate any
1887 * Changed silc_mp_mp2bin API to take length argument. If it is
1888 non-zero then the buffer is allocated that large. If zero, then
1889 the size is approximated using silc_mp_sizeinbase, which however
1892 * Created Global RNG API which is global RNG that application can
1893 initialize. After initializing, any routine anywhere in the
1894 code (including library) can use RNG without allocating a new
1895 RNG object. This was done to allow this sort of use of the
1896 RNG in code that has no chance to allocate RNG object. All
1897 applications currently allocate this and many routines in the
1898 library use this. Affected file lib/silccrypt/silcrng.[ch].
1900 * Removed the RNG kludge from lib/silcmath/primegen.c and changed
1901 it to use the Global RNG API.
1903 * Defined Authentication Payload into protocol specification that
1904 is used during SILC session to authenticate entities. It is
1905 used for example by client to authenticate itself to the server
1906 to obtain server operator privileges.
1908 Implemented this payload into the lib/silccore/silcauth.[ch].
1909 Implemented also routines for public key based authentication
1910 as the new protocol specification dictates.
1912 Moved definitions of different authentication methods from
1913 lib/silccore/silcprotocol.h into lib/silccore/silcauth.h.
1915 * Added silc_pkcs_encrypt, silc_pkcs_decrypt, silc_pkcs_sign,
1916 silc_pkcs_verify and silc_pkcs_sign_with_hash and
1917 silc_pkcs_verify_with_hash functions into the file
1918 lib/silccrypt/silcpkcs.[ch].
1920 Mon Feb 19 19:59:28 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1922 * The client entry's userinfo pointer must be always valid.
1923 Otherwise the [<unknown>] bug will surface beacuse the WHOIS
1924 will fail since it requires the userinfo. Now, the userinfo
1925 is allocated as "" if actual userinfo does not exist. Actually,
1926 it must exist and it is totally Ok to drop client connections
1927 that does not announce the userinfo. However, we will make
1928 this workaround for now.
1930 * Added silc_net_get_remote_port into lib/silcutil/silcnet.[ch]
1931 to return the remote port by socket.
1933 Mon Feb 19 14:26:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1935 * Changed SILC_SERVER_COMMAND_EXEC_PENDING macro to the name
1936 SILC_SERVER_PENDING_EXEC and added an new macro
1937 SILC_SERVER_PENDING_DESTRUCTOR which is called to free the
1938 data or when error occurs while processing the pending command.
1940 Added new argument `destructor' into silc_server_command_pending
1941 and to the SilcServerCommandPending object. This destructor is
1942 now called after calling the pending callback or if error occurs
1943 immediately. If error occurs the actual pending callback won't
1944 be called at all - only the destructor. The destructor may be
1945 NULL if destructor is not needed.
1947 All this applies for client library code as well. Similar
1948 changes were made there as well for the pending commands.
1950 In the client, the application must now allocate the
1951 SilcClientCommandContext with the silc_client_command_alloc
1954 * Added reference counter to the SilcServerCommandContext. Added
1955 function silc_server_command_alloc and silc_server_command_dup
1958 Same type of functions added to the client library for the same
1961 * Removed the cmd_ident from IDListData away since it is now
1962 global for all connections. It is the command identifier used
1963 in command sending and with pending commands. The affected file
1966 * Added reference counter to the SilcSocketConnection objecet to
1967 indicate the usage count of the object. The object won't be
1968 freed untill the reference counter hits zero. Currently only
1969 server uses this, and client ignores it. The client must be
1970 set to use this too later. The affected files are
1971 lib/silccore/silcsockconn.[ch]. Added also the function
1972 silc_socket_dup to increase the reference counter.
1974 This was mainly added because it is possible that the socket
1975 is removed underneath of pending command or other async
1976 operation. Now it won't be free'd and proper DISCONNECTING
1977 flags, etc. can be set to avoid sending data to connection that
1978 is not valid anymore.
1980 * Added SILC_SET_DISCONNECTING to server.c when EOF is read from
1981 the connection. After that it sets SILC_SET_DISCONNECTED.
1982 It is, however, possible that the socket data is not still freed.
1983 The silc_server_packet_process now checks that data is not
1984 read or written to connection that is DISCONNECTED. The socket
1985 get's freed when the reference counter hits zero.
1987 Mon Feb 19 00:50:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1989 * Changed the client operation API: channel_message operation's
1990 `sender' is now the client entry of the sender, not the nickname
1991 and the `channel' is the channel entry, not the channel name.
1993 In the private_message operation the `sender' is now also the
1994 client entry of the sender not the nickname.
1996 Affected file is lib/silcclient/ops.h and all applications
1997 using the client operations.
1999 Sat Feb 17 22:11:50 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2001 * Moved the calling of ops->connect() from connect_to_server_final
2002 into receive_new_id functin since that is the point when the
2003 client is actually allowed to send traffic to network. The
2004 affected file is lib/silcclient/client.c.
2006 Sat Feb 17 13:15:35 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2008 * When receiving NEW_CHANNEL_LIST, NEW_CHANNEL_USER_LIST,
2009 NEW_ID_LIST and SET_MODE_LIST packets, broadcast the list packet
2010 (if needs broadcasting) instead of broadcasting the packets one
2011 by one which would make a burst in the network traffic.
2013 * Added `broadcast' argument to the functions in silcd/server.[ch]
2014 silc_server_create_new_channel[_with_id] to indicate whether
2015 to send New Channel packet to primary router.
2017 Sat Feb 17 01:06:44 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2019 * Added new function into the silcd/server.[ch] files:
2020 silc_server_create_new_channel_with_id to create new channel with
2021 already existing Channel ID.
2023 * Added new packet type SILC_PACKET_SET_MODE_LIST into the file
2024 lib/silccore/silcpacket.h. This packet is used t send list of
2025 Set Mode payloads inside one packet. Server uses this to set
2026 the modes for the channels and clients on those channels, that it
2027 announced to the router when it connected to it. The protocol
2028 specification has been updated accordingly.
2030 * The silc_server_new_channel did not handle the packet coming
2031 from normal server as it normally does not send that. However,
2032 when it announces its channels it does send it. Implemented
2033 the support for that.
2035 * Added SILC_ID_CHANNEL_COMPARE macro to compare to Channel ID's
2036 into the file lib/silccore/id.h.
2038 Fri Feb 16 23:57:29 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2040 * Fixed memory leaks in the functions silc_idlist_del_client,
2041 silc_idlist_del_channel and silc_idlist_del_server in the file
2042 silcd/idlist.c. All of those leaked like a sieve.
2044 * Fixed some small memory leaks in the client's function
2045 silc_client_notify_by_server.
2047 * Added functions into silcd/server.c: silc_server_announce_clients,
2048 silc_server_announce_channels and silc_server_announce_server.
2049 These functions are used by normal and router server to announce
2050 to its primary router about clients, channels and servers (when
2051 router) that we own. This is done after we've connected to the
2054 These functions effectively implements the following packet types:
2055 SILC_PACKET_NEW_CHANNEL_LIST, SILC_PACKET_NEW_CHANNEL_USER_LIST
2056 and SILC_PACKET_NEW_ID_LIST.
2058 * Added new functions into the silcd/packet_receive.[ch]:
2059 silc_server_new_id_list, silc_server_new_channel_list and
2060 silc_server_new_channel_user_list to handle the incoming
2061 NEW_ID_LIST, NEW_CHANNEL_LIST and NEW_CHANNEL_USER_LIST packets.
2063 * Added support of changing Channel ID in the function
2064 silc_server_replace_id. If the server that announces a channel
2065 to the router already exists in the router (with same name but
2066 with different Channel ID), router is responsible to send
2067 Replace ID packet to the server and force the server to change
2068 the Channel ID to the one router has.
2070 * Added new notify type SILC_NOTIFY_TYPE_CHANNEL_CHANGE to notify
2071 client that the Channel ID has been changed by the router. The
2072 normal server sends this to the client. Client must start using
2073 the new Channel ID as the channel's ID.
2075 Implemented handling of this new type into lib/silcclient/client.c
2076 into the function silc_client_notify_by_server.
2078 * Added new function silc_idlist_replace_channel_id into the files
2079 silcd/idlist.[ch] to replace the Channel ID.
2081 Fri Feb 16 14:14:00 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2083 * Call silc_server_command_identify_check always when processing
2084 the IDENTIFY command in silcd/command.c
2086 Thu Feb 15 20:07:37 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2088 * Added new packet type SILC_PACKET_HEARTBEAT that is used to
2089 send keepalive packets. The packet can be sent by clients,
2090 servers and routers.
2092 Added function silc_socket_set_heartbeat into the file
2093 lib/silccore/silcsockconn.[ch] to set the heartbeat timeout.
2094 If not set, the heartbeat is not performed. The actual
2095 heartbeat is implemented in the low level socket connection
2096 library. However, application is responsible of actually
2099 Added silc_server_send_heartbeat to send the actual heartbeat
2100 packet into silcd/packet_send.[ch]. Server now performs
2101 keepalive with all connections.
2103 * Added silc_task_get_first function into lib/silcutil/silctask.c
2104 to return the timeout task with shortest timeout. There was a bug
2105 in task unregistration that caused problems. TODO has been
2106 updated to include that task system must be rewritten.
2108 * The client library will now resolve the client information when
2109 receiving JOIN notify from server for client that we know but
2110 have incomplete information.
2112 * Rewrote parts of silc_server_remove_from_channels and
2113 silc_server_remove_from_one_channel as they did not remove the
2114 channel in some circumstances even though they should've.
2116 * Encryption problem encountered in server:
2118 The LEAVE command used to send the Channel Key packet to the
2119 router immediately after generating it. However, the code
2120 had earlier sent Remove Channel user packet but not immediately,
2121 ie. it was put to queue. The order of packets in the router
2122 was that Channel Key packet was first and Remove Channel User
2123 packet was second, even though they were encrypted in the
2124 reverse order. For this reason, MAC check failed. Now, this
2125 is fixed by not sending the Channel Key packet immediately but
2126 putting it to queue. However, this is more fundamental problem:
2127 packets that are in queue should actually not be encrypted
2128 because packets that are sent immediately gets encrypted
2129 actually with wrong IV (and thus MAC check fails). So, packets
2130 that are in queue should be encrypted when they are sent to
2131 the wire and not when they put to the queue.
2133 However, the problem is that the current system has not been
2134 designed to work that way. Instead, the packet is encrypted
2135 as soon as possible and left to the queue. The queue is then
2136 just purged into wire. There won't be any fixes for this
2137 any time soon. So, the current semantic for packet sending
2140 o If you send packet to remote host and do not force the send
2141 (the packet will be in queue) then all subsequent packets to the
2142 same remote host must also be put to the queue. Only after the
2143 queue has been purged is it safe again to force the packet
2146 o If you send all packets immediately then it safe to send
2147 any of subsequent packets through the queue, however, after
2148 the first packet is put to queue then any subsequent packets
2149 must also be put to the queue.
2151 Follow these rules and everything works fine.
2153 Thu Feb 15 14:24:32 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2155 * Added new function silc_server_remove_clients_by_server to
2156 remove all client entries from ID list when the server connection
2157 is lost. In this case it is also important to invalidate all
2158 client entires as they hold the invalid server entry. This
2159 fixes fatal bug when server has lost connection and will reconnect
2162 Wed Feb 14 16:03:25 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2164 * Made some sanity checks to silc_server_daemonise like to check
2165 whether the requested user and group actually exists.
2167 * Added sanity check to SKE's silc_ske_responder_finish to check
2168 that the public and private key actually is valid.
2170 * Invalidate the client's nickname when receiving Replace ID
2171 packet and the Client ID is being replaced. This means that the
2172 server will query the nickname if someone needs it (client)
2175 * Sort the ID Cache in client library when the ID Cache data
2176 has changed (needs sorting).
2178 * Do not allow for SILC client to create several connections to
2179 several servers. The client does not support windows right now
2180 and generating multiple connections causes weird behaviour.
2182 Irssi-silc client does support windows and can handle several
2183 connections without problems, see: www.irssi.org and SILC plugin.
2185 * Fixed some places where client was added to the IDList. The
2186 rule of thumb is following (in order to get everything right):
2187 If the client is directly connected local client then the
2188 `connection' argument must be set and `router' argument must be
2189 NULL to silc_idlist_add_client function. If the client is not
2190 directly connected client then the `router' argument must
2191 bet set and the `connection' argument must be NULL to the
2192 silc_idlist_add_client function.
2194 * The funtion silc_server_packet_send_local_channel actually did
2195 not check whether the client was locally connected or not. It
2196 does that now. Fixed a bug related to LEAVE command.
2198 * Fixed Remove Channel User payload parsing bug in server's
2199 silcd/packet_receive.c. Fixed a bug related to LEAVE command.
2201 * The server's silc_server_save_channel_key now checks also the
2202 global ID list for the channel as it might not be in the local
2203 list. Fixed a bug related to LEAVE command.
2205 * Is this the end of the [<unknown>] buglet that has been lurking
2206 around for a long time? A little for loop fix in server's
2207 silc_server_command_whois_parse that is used by both IDENTIFY
2208 and WHOIS command. At least, this was a clear bug and a cause
2209 of one type of [<unknown>] buglet.
2211 * WHOIS and IDENTIFY commands call the function
2212 silc_server_command_[whois/identify]_check function even if
2213 we are not router server.
2215 Tue Feb 13 19:55:59 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2217 * Added --with-gmp configuration option. If set the GMP
2218 is always compiled in the SILC source tree. If not set then
2219 it is checked whether the system has the GMP3 installed. If
2220 it has then the GMP won't be compiled (the system's headers
2221 and library is used), if it doesn't have it then the GMP is
2222 compiled in the SILC source tree.
2224 Mon Feb 12 11:20:32 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2226 * Changed RSA private exponent generation to what PKCS #1
2227 suggests. We try to find the smallest possible d by doing
2228 modinv(e, lcm(phi)) instead of modinv(e, phi). Note: this is
2229 not security fix but optimization.
2231 Sun Feb 11 18:19:51 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2233 * Added new config entry [Identity] to fork the server and run
2234 it as specific user and group. A patch from Bostik.
2236 * Imported Dotconf configuration library into lib/dotconf.
2237 This will be used to create the SILC configuration files later.
2238 It will appear in the distsribution after this commit.
2240 Sat Feb 10 21:13:45 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2242 * A big code auditing weekend happening. Auditing code for
2243 obvious mistakes, bugs and errors. Also, removing any code
2246 Removed files for being obsolete:
2248 o lib/silcutil/silcbuffer.c (the buffer interface is entirely in
2249 inline in the file lib/silcutil/silcbuffer.h)
2251 o lib/silcutil/silcbufutil.c (the header has inline versions)
2253 Changed code to fix possible error conditions:
2255 o The buffer formatting routines now check that the destination
2256 buffer really has enough space to add the data. This applies for
2257 both buffer formatting and unformatting
2258 (lib/silcutil/silcbuffmt.[ch]). Also, the entire buffer
2259 unformatting was changed to accomodate following rules:
2260 XXX_*STRING_ALLOC will allocate space for the data into the pointer
2261 sent to the function while XXX_*STRING will not allocate or copy
2262 the data into the buffer. Instead it sets the pointer from the
2263 buffer into the pointer sent as argument (XXX_*STRING used to
2264 require that the pointer must be allocated already). This change
2265 makes this whole thing a bit more consistent and more optimized
2266 (note that the data returned in the unformatting with XXX_*STRING
2267 must not be freed now). The routines return now -1 on error.
2269 o Tried to find all code that use buffer_format and buffer_unformat
2270 and added return value checking to prevent formatting and
2271 especially unformatting errors and possible subsequent fatal
2274 o Changed ske->x and ske->KEY to mallocated pointers in
2275 lib/silcske/silcske.h. Fixed possible data and memory leak.
2277 o Added return value checking to all *_parse* functions. Fixed
2278 many memory leaks as well.
2280 o Added length argument to silc_id_str2id in lib/silccore/id.[ch]
2281 so that buffer overflows would not happen. All code now also
2282 checks the return value as it can fail.
2284 Mon Feb 5 20:08:30 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2286 * Added reconnection support to server if the normal server looses
2287 its connection to the router (for example if router is rebooted).
2288 The server performs normal reconnection strategy implemented
2289 to the server. Affected file silcd/server.c.
2291 Sun Feb 4 13:18:32 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2293 * Added new packet type SILC_PACKET_SET_MODE that is used to
2294 distribute the information about changed modes (for clients,
2295 channels and clients channel modes) to all routers in the
2296 network. Updated the protocol specification accordingly.
2298 Added functions into silcd/packet_send.c and
2299 silcd/packet_receive.c: silc_server_send_set_mode,
2300 silc_server_set_mode.
2302 Added new files silcmode.[ch] into lib/silccore that implements
2303 the encoding and decoding of Set Mode Payload. Added new type
2304 SilcSetModePayload. Moved the definitions of different modes
2305 from lib/silccore/silcchannel.h into lib/silccore/silcmode.h.
2307 Sat Feb 3 15:44:54 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2309 * Oops, a little mistake in server's connection authentication
2310 protocol. The protocol is not ended with FAILURE but with
2311 SUCCESS if the authentication is Ok. :) Affected file is
2314 * Implemented NICK_CHANGE notify handling in server in the file
2315 silcd/packet_receive.c The NICK_CHANGE notify is distributed to
2316 the local clients on the channel. After the changing nickname
2317 in router environment snhould work and the [<unknown>] nickname
2318 should appear no more.
2320 The silc_server_replace_id function that receives the Replace ID
2321 payload now sends the NICK_CHANGE notify type also in the file
2322 silcd/packet_receive.c
2324 * Changed WHOIS and IDENTIFY command to support the maximum amount
2325 of arguments defined in protocol specs (3328 arguments). This
2326 fixed a bug that caused problems when there were more than three
2329 Fri Feb 2 11:42:56 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2331 * Added extra parameter, command identifier, to the
2332 silc_client_send_command so that explicit command identifier
2335 Changed that ID list routines uses specific command identifier
2336 when sending WHOIS/IDENTIFY requests to the server so that they
2337 can be identified when the reply comes back.
2339 Affected files lib/silcclient/command.[ch],
2340 lib/silcclient/client.c and lib/silcclient/idlist.[ch].
2342 * Added `sender' argument to silc_server_packet_send_to_channel
2343 to indicaet the sender who originally sent the packet to us
2344 that we are now re-sending. Ignored if NULL. Affected file
2345 silcd/packet_send.[ch].
2347 * Added some server statistics support in silcd/server_internal.h
2348 SilcServerStatistics structure and around the server code. Also
2349 send some nice statistics information when client is connecting
2352 Thu Feb 1 23:31:21 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2354 * Fixed channel ID decoding in server's JOIN command reply in
2355 silcd/command_reply.c
2357 * Fixed braodcasting of replace ID payload to not to send it if
2358 we are standalone server in silcd/packet_receive.c.
2360 * Fixed all channel message sending routines to not to send
2361 packets to clients that has router set, since they are routed
2362 separately in the same function earlier. Affects file
2363 silcd/packet_send.c and all channel packet sending functions.
2365 * In USERS reply, res_argv[i] are not allocated, the table
2366 is allocated. Thus changed that free the table, not its
2369 * In server's whois_check and identify_check if the client is
2370 locally connected do not send any WHOIS commands - they are not
2373 Thu Feb 1 21:32:27 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2375 * Fixed some minor bugs in client when sending WHOIS command. The
2376 arguments was in wrong order.
2378 * Removed statis function add_to_channel from server in
2379 silcd/command.c that was previously used with the joining but
2382 * Tested USERS command in router environment successfully with two
2383 routers, two servers and two clients.
2385 Thu Feb 1 00:54:26 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2387 * Reorganized the USERS command and command reply in client library
2388 in lib/silcclient/command.c and lib/silcclient/command_reply.c.
2389 When the command is given by user we register a pending command
2390 callback that will reprocess the command after the reply has been
2391 received from the server. When reprocessing the packet we then
2392 display the information. Thus, the USERS information is displayed
2393 now in the command callback instead of in the command reply
2394 callback. The processing of the command is same as previously
2395 when server has sent the command reply in the JOINing process.
2397 * Added to USERS command in silcd/command_reply.c to join the client,
2398 we didn't use to know about, to the channel after we've created
2399 a client entry for it. Also, for clienet we did know already still
2400 check whether it is on the channel or not and add it if not.
2402 * Removed silc_server_command_join_notify as the function and its
2405 Tue Jan 30 22:39:15 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2407 * Changed the client's pending command handling to the same as the
2408 server's pending command handling. It is also now possible to
2409 execute command reply functions from other command reply
2410 function as the function callbacks for commands and command
2411 replies are one and same. The pending commands are not static
2412 list anymore, it is mallocated SilcDList in lib/silcclient/client.h
2413 in client connection context. Thus, pending commands are server
2414 connection specific as it is convenient.
2416 Changed the function silc_client_command_pending and
2417 silc_client_command_pending_del and added new function
2418 silc_client_command_pending_check. Removed the
2419 SILC_CLIENT_CMD_REPLY_EXEC, and SILC_CLIENT_PENDING_COMMAND_CHECK
2422 * Added cmd_ident, current command identifier, to the client
2423 connection context in lib/silcclient/client.h to keep track on
2424 command identifiers used in command sending. Client's command reply
2425 function handling now supports the mandatory command identifiers.
2427 * Added SILC_CLIENT_COMMAND_EXEC_PENDING macros to all command reply
2428 funtions in client to fully support pending command callbacks.
2430 * NOTE: the name_list in USERS (old NAMES) command is NOT sent anymore
2431 as one of the arguments to the application in the command reply
2434 * NOTE: The FORWARDED flag is depracated. It used to be depracated
2435 before first releasing SILC but came back. Now it is removed again
2436 and should come back nomore. The FORWARDED flag was used only
2437 by the JOINing procedure by forwarding the command packet to router.
2438 Now, the JOINing procedure has been changed to more generic (due
2439 to various router environment issues) and FORWARDED is not needed
2440 anymore for anything. The protocol specification is yet to be
2443 Now, removed silc_server_packet_forward from server and the flag
2444 SILC_PACKET_FORWARDED from lib/silccore/silcpacket.h.
2446 Tue Jan 30 00:05:05 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2448 * Renamed NAMES command to USERS command. The NAMES was named that
2449 due to historical reasons. Now it is renamed. Also, rewrote
2450 parts of the USERS command. The nickname list is not sent anymore
2451 by the server. Only Client ID and mode lists are sent in the USERS
2452 command. Changed this also to the protocol specification.
2454 The client now resolves the names and stuff after it receives
2455 the USERS list from the server when joining to the channel.
2457 * WHOIS and IDENTIFY commands has been changed to support multiple
2458 Client ID's per command. One can now search for multiple users
2459 in the network by sending only one WHOIS or IDENTIFY command.
2460 Changed the code and the protocol specifications.
2462 * Removed silc_server_command_identify_parse and changed that IDENTIFY
2463 uses silc_server_command_whois_parse to parse the request. */
2465 * If normal server, do not parse the WHOIS and IDENTIFY requests
2466 before sending it to the router. Saves some time.
2468 Sun Jan 28 16:19:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2470 * Fixed JOIN command on client library. Wrong number of arguments
2471 used to crash the client.
2473 * Added silc_server_channel_has_global function to check whether
2474 channel has global users or not.
2476 * Added silc_server_channel_has_local function to check whether channel
2477 has locally connected clients on the channel.
2479 * The silc_server_remove_from_one_channel now checks whether the
2480 channel has global users or not after given client was removed from
2481 the channel. It also checks whether the channel has local clients
2482 on the channel anymore. If it does not have then the channel entry
2483 is removed as it is not needed anymore.
2485 * The silc_server_notify now checks on JOIN notify whether the joining
2486 client is one of locally connected or global. If it is global then
2487 the channel has now global users on the channel and that is marked
2488 to the channel entry. Also, it now saves the global client to
2489 global list who is joining and JOINs it to the channel. This is
2490 for normal server, that is.
2492 Changed silc_server_send_notify_on_channel,
2493 silc_server_packet_relay_to_channel and
2494 silc_server_packet_send_to_channel check if we are normal server
2495 and client has router set (ie. global client) do not send the
2496 message to that client, as it is already routed to our router.
2498 * Implemented LEAVE notify type handling in silc_server_notify
2501 * Tested LEAVE command in router environment successfully. Tested
2502 with two routers, two servers and two clients.
2506 * idlist_find_xxx_by_id routines now dumps the ID on the debug mode.
2508 * Implemented SIGNOFF notify type handling in silc_server_notify
2511 * silc_server_remove_id now removes the client entry from all channels
2512 it has joined and thusly sends SIGNOFF notify type.
2514 * Rewrote the NAMES list generation in server by removing two excess
2515 loops. The lists are created now inside one loop.
2517 Sat Jan 27 22:34:56 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2519 * silc_server_remove_channel_user checks now also global list
2520 for channel and client.
2522 * silc_server_new_channel_user checks now both local and global
2523 list for channel and client. Fixed a bug in client id decoding.
2524 Used to decode wrong buffer.
2526 * silc_server_channel_message checks now both local and global
2527 list for channel entry.
2529 * Tested channel joining (hence JOIN) in router environment
2530 successfully. Tested with two routers, two servers and two
2533 * Tested channel message sending in router environment successfully.
2535 Thu Jan 11 03:22:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
2537 * Added silc_server_save_channel_key into server.[ch] to save the
2538 received channel key in Channel Key payload processing. It is
2539 also used in JOIN command reply handling.
2541 Equivalent function silc_client_save_channel_key added into
2542 client.[ch] into client library.
2544 * Changed JOIN command reply to send information whether the channel
2545 was created or not (is existing already) and the channel key
2546 payload. Changed protocol specs accordingly.
2548 * Fixed bugs in WHOIS and IDENTIFY command reply sending when
2549 the request was sent by ID and not by nickname. Crashed on
2552 Sat Dec 23 21:55:07 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2554 * Fixed a bug in Client library. IDENTIFY and WHOIS reply functions
2555 now correctly save the received data.
2557 * silc_server_free_sock_user_data now notifies routers in the
2558 network about entities leaving the network.
2560 At the same time implemented functions silc_server_remove_id
2561 and silc_server_send_remove_id to receive and send REMOVE_ID
2562 packets. The packet is used to notify routers in the network
2563 about leaving entities. The ID removed will become invalid in
2566 * Added function silc_idlist_del_server into server. Removes and
2567 free's server entry from ID list.
2569 * silc_server_private_message function now checks, if we are router,
2570 that the destination ID really is valid ID, naturally.
2572 * In router when NEW_ID packet is received (for new client) the
2573 hash of the Client ID is saved in the ID Cache but the
2574 client->nickname is set to NULL, instead of putting the hash
2577 IDENTIFY command now also checks that client->nickname must be
2578 valid. If it is not if will request the data from the server who
2579 owns the client. Added new function
2580 silc_server_command_identify_check.
2582 * Added silc_command_set_command into lib/silccore/silcommand.[ch]
2583 to set the command to already allocated Command Payload.
2585 * Tested private message sending in router environment with two
2586 routers, two servers and two clients. Fixed minor bugs and now
2589 * Fixed segfault from client's NAMES command. Used to crash if
2592 * Forwarded packets must not be routed even if it is not destined
2593 to the receiver. Changed server code comply with this.
2595 Sun Dec 17 14:40:08 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2597 * Added `require_reverse_mapping' boolean value to ServerParams
2598 structure. If TRUE (not default) the server will require that
2599 the connecting host has fully qualified domain name.
2601 If the reverse mapping is not required and hostname could not be
2602 found the IP address is used as hostname.
2604 Sat Dec 16 17:39:54 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2606 * Implemented version string checking to both client and server.
2607 The check is incomplete currently due to the abnormal version
2608 strings used in development version of SILC.
2610 * Changed all command functions in server to use the new
2613 Fri Dec 15 15:55:12 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2615 * Changed char *data to unsigned char *data in ID Cache system to
2616 support binary data as ID Cache data. Changed code to support
2617 binary data in lib/silccore/idcache.c.
2619 * Renamed silc_server_packet_relay_command_reply to
2620 silc_server_command_reply as it is normal packet receiving
2621 function. Rewrote the function to accept command replys for
2622 servers and not only for clients.
2624 * Mark remote router always as registered server if we are connecting
2625 to it. Otherwise, commands sent by the router to us are ignored.
2627 * All ID List find routines now returns the ID Cache Entry pointer
2628 as well if requested.
2630 * WHOIS command works now in router environment, tested with two
2631 routers, two servers and two clients.
2633 * Cleaned up and rewrote IDENTIFY command. IDENTIFY should work now
2634 in router environment (as it is almost equivalent to WHOIS) but
2635 hasn't been tested thoroughly. Added new functions:
2637 silc_server_command_identify_parse
2638 silc_server_command_identify_send_reply
2639 silc_server_command_identify_from_client
2640 silc_server_command_identify_from_server
2642 * Disabled route cache adding because adding two different ID's with
2643 same IP replaces the old cache entry thus giving wrong route.
2644 The entry->router->connection is always the fastest route anyway
2645 so route cache may not be needed. Of course, new routes maybe
2646 established after receiving the ID when the entry->router->connection
2647 might not be anymore the most optimal.
2649 Thu Dec 14 15:55:35 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2651 * Add route cache for received ID for fast routing.
2653 * Added silc_server_packet_route to route received packet on router
2654 that is not destined to us.
2656 * Renamed silc_server_get_route to silc_server_route_get.
2658 * Added id_string and id_string_len fields into SilcServer to
2659 include encoded ServerID for fast comparing without excess
2660 encoding of the ID's.
2662 * Cleaned up WHOIS command on server side. Added following static
2665 silc_server_command_whois_parse
2666 silc_server_command_whois_check
2667 silc_server_command_whois_send_reply
2668 silc_server_command_whois_from_client
2669 silc_server_command_whois_from_server
2671 * Added macro SILC_SERVER_COMMAND_CHECK_ARGC to check mandatory
2672 arguments in command replies. All command functions should be
2673 updated to use this macro.
2675 Sun Dec 10 23:52:00 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2677 * Minor typo fixes on command reply handling on server.
2679 Tue Nov 28 11:05:39 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2681 * Added silc_server_command_add_to_channel internal routine to add
2682 the client to the channel after router has created the channel and
2683 sent command reply to the server.
2685 * Added generic silc_server_send_command to send any command from
2688 * Use static buffer with ID rendering instead of duplicating data.
2690 Mon Nov 27 21:39:40 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2692 * Fixed a channel user mode bug when joining to a channel server gave
2693 everybody channel founder rights, oops.
2695 * We mark ourselves as the router of the incoming server connection
2696 if we are router ourselves. This way we can check in some packet
2697 sending functions whether it is locally connected server. For
2698 incoming router connections we put NULL.
2700 * For router sending packets locally means now always sending the
2701 packet cell wide; to local clients and local servers. For normal
2702 server sending packet locally means sending it to only local
2705 * Fixed the JOIN command to really work in router environment. If the
2706 channel is created it is always created by the router. Router is
2707 also responsible of making the initial joining to the channel,
2708 sending JOIN notify to the sending server and distributing
2709 NEW_CHANNEL and NEW_CHANNEL_USER packets. Hence, if the channel
2710 does not exist server doesn't do anything else but forward the
2711 command to the router which performs everything.
2713 * Added silc_server_send_channel_key function to send the Channel Key
2716 * Added silc_server_create_channel_key to create new channel key. The
2717 channel key is now re-generated everytime someone joins or leaves
2718 a channel, as protocol dictates. Note: channel->key_len is the
2721 Wed Nov 22 22:14:19 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2723 * Splitted server.[ch] finally. Created now packet_send.[ch] and
2724 packet_receive.[ch] to separate packet sending and receiving
2725 routines. The server.[ch] now includes everything else including
2726 actual packet processing (writing and reading data) and other
2729 Renamed silc_server_private_message_send_internal to
2730 silc_server_send_private_message. The routine is still though
2731 used only to relay private messages as server does not send
2732 private messages itself.
2734 Renamed silc_server_new_channel to silc_server_create_new_channel
2735 and added new function sicl_server_new_channel that handles the
2736 incoming New Channel packet. Added also new sending function
2737 silc_server_send_new_channel to send New Channel Payload.
2739 * Added new function silc_server_notify to process incoming notify
2740 packet to the server/router. Server may then relay the notify
2741 to clients if needed.
2743 * Added new function silc_server_new_channel_user to process incoming
2744 New Channel User packet. Router will redistribute the packet and
2745 send JOIN notify to its local clients and locally connected servers
2746 if needed. Normal server will send JOIN notify to its local client
2747 on same channel when received this packet. Added also corresponding
2748 sending function silc_server_send_new_channel_user to sent the
2751 * Added boolean route argument to send_notif_to_channel and
2752 packet_send_to_channel functions to attempt to route the packet
2753 if it is TRUE and send only locally if it is FALSE.
2755 Tue Nov 21 19:49:31 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2757 * silc_server_replace_id now broadcasts the received replace ID
2758 packet if it is not broadcast packet already. The router must
2759 broadcast to inform other routers about changed ID.
2761 * Added backpointer to server's router into SilcServer context in
2762 silcd/server_internal.h.
2764 * Fixed silc_server_packet_broadcast to send correct broadcast
2767 * The channel key is now distributed to the local client as soon
2768 as it is received from the router (in router environment) so that
2769 no other packet may be sent for the channel until client has
2772 * silc_server_remove_channel_user now broadcasts the received
2773 Remove Channel User packet if it is not broadcast packet already.
2774 The router must broadcast to inform other routers about removed
2777 * Added users field into SilcPacketContext that is a reference count
2778 of the context. One can increase the reference count by calling
2779 silc_packet_context_dup which is now changed to just increase the
2780 reference count instead of duplicating the data. The reference
2781 count is decresed by calling silc_packet_context_free that will
2782 free the data after the reference count hits zero.
2784 For now on the packet context and everything allocated into it
2785 (including the raw packet from network) must be freed by calling
2786 the new silc_packet_context_free function. Added also new function
2787 silc_packet_context_alloc that must be used now to allocate the
2788 context. This also means that if a routine is asynchronous from
2789 silc_[client/server]_packet_parse_type the packet context must
2790 be duplicated by calling silc_packet_context_dup. Otherwise it
2791 gets free'd after silc_[client/server]_packet_parse_type returns.
2792 Also, one must remember that if packet is duplicated then its
2793 reference count must be decresed by calling the free function as
2794 many times as it was duplicated.
2796 * Changed SilcBuffer field from protocol contexts to SilcPacketContext
2797 from both client and server.
2799 Mon Nov 20 23:47:03 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2801 * Made joining to a channel working in router environment.
2803 * Cleaned up JOIN command on server side and create function
2804 silc_server_command_join_channel internal routine to make the
2807 Thu Nov 9 21:12:39 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2809 * Changed silc_command_pending list to SilcDList. Also, added
2810 `ident' field to SilcServerCommandPending structure to identify
2811 the reply and to call correct callback.
2813 Added silc_server_command_pending_check function to replace the
2814 corresnponding macro. The silc_command_pending list is not
2817 * Added silc_command_set_ident into lib/silccore/silccommand.[ch]
2818 to set identifier to previously allocated Command Payload. It
2819 is used to set identifier for command when resending Command
2822 * Added silc_command_payload_encode_payload to encode Command
2823 Payload buffer from SilcCommandPayload structure.
2825 * Added silc_argument_payload_encode_payload to encode Argument
2826 payload buffer from SilcArgumentPayload structure.
2828 Wed Nov 8 21:03:28 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2830 * Changed WHOIS command to support router connection on server side.
2831 The whois request is always sent to router unless the server is
2832 standalone server. After server has received the reply from the
2833 router will it send the reply to the client.
2835 * Added silc_server_packet_broadcast into silcd/server.[ch] to
2836 broadcast received broadcast packet. The function is used only
2837 by router. The broadcast packet is always sent to the router's
2840 * Added silc_id_render function in lib/silcutil/silcutil.[ch] to
2841 render given ID to printable string, for log files for example.
2843 Tue Nov 7 22:14:19 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2845 * Made basic router to router connections working. At least they
2846 can now connect to each other but nothing really works the way
2847 they are supposed - yet.
2849 * Added new initiator token to RouterConnection configuration
2850 file in silcd/serverconfig.[ch]. It is used to tell whether we
2851 are the initiator to the remote router or whether we'll expect
2852 the other end to connect.
2854 * Moved registering of listener task to silc_server_init, hence
2855 the server starts listenning as soon as it is run, even if it
2856 does not have connections to other routers. Let's see how well
2859 * Changed default connection retry timeouts for more suitable in
2862 * Removed cipher and such arguments from silc_idlist_add_client
2863 and silc_idlist_add_server prototypes from silcd/idlist.[ch].
2864 Added new function silc_idlist_add_data to add the keys and stuff
2867 * Added SilcIDListData structure and added it to SilcClientEntry
2868 and SilcServerEntry as their first field in the structure. This
2869 way we can explicitly cast the ID entries to the SilcIDListData
2870 structure and get common data for the entries. In past, we had
2871 to first check what type of connection it is and then cast it to
2872 correct ID entry type. Now, we can directly cast the opaque
2873 pointer to the SilcIDListData (no matter what ID entry it actually
2874 is) and get the data needed.
2876 Mon Nov 6 21:56:12 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2878 * Wow, found a bug in scheduler. The scheduler uninitialized itself
2879 in some circumstances even if threre were timeout tasks, though not
2880 IO tasks, but tasks anyway. Now fixed.
2882 * Defined SilcServerConnection structure to hold connection specific
2883 stuff about directly connected servers and routers. The definition
2884 is currently in silcd/server_internal.h. I thought about having
2885 a bit more important role fro this struct but for now it is used
2886 only when connecting to other server (or router actually).
2888 * Added connecting retry support in server when connecting to
2889 router(s). The retry feature implement exponential backoff
2890 algorithm. Also, added SilcServerParams structure to hold default
2891 parameters for server. For now, it include these retry settings
2892 and are hard coded. After server is moded to be as Silc Server
2893 Library this structure will be more important.
2895 Sun Nov 5 22:28:44 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2897 * Changed client librarys channel->clients table to SilcList and
2898 changed code accordingly.
2900 Thu Nov 2 16:28:01 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2902 * Changed client's channel table to SilcList and changed code
2903 accordingly. Also changed SilcChannelClientEntry to include back-
2904 pointer to the channel so that client entry can use that structure
2905 as list as well and we have fast cross-reference to the channel.
2906 This change dramatically decreased the complexity of channel
2907 handling with client entry and vice versa (removed one extra
2908 loop when searching for channel entry from many functions).
2910 * Changed server->sim from table to SilcDList and changed code
2913 * NAMES command can now be used from user interface. It will show
2914 the user list on the channel, neatly.
2916 * Added realname pointer to SilcClientEntry in lib/silcclient/idlist.h.
2917 Code now saves realname of the user if it becomes available.
2919 * Renamed configure.in to configure.in.pre and made ./prepare
2920 script to automatically add correct version string to
2921 configure.in which it creates from configure.in.pre.
2923 Wed Nov 1 17:21:26 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2925 * NAMES command reply now shows users mode with the nickname when
2928 * Moved silc_client_ch[u]mode[_char] functions from
2929 silc/clientutil.[ch] to lib/silcclient/client.[ch]. Though, that
2930 place sucks, they are utility functions and should be in some
2933 * Fixed some unsigned int's to unsigned short's. Patch by cras.
2935 * Fixed contrib/getopt*.[ch] to not require config.h. Patch by
2938 Tue Oct 31 20:10:37 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2942 * Added TRQ (efficient deque and list library) into lib/trq. This is
2943 a very good list library that is currently used in the SILC. Defined
2944 SilcList API over the library because I didn't like the API very
2945 much. See lib/trq/silclist.h for the API and examples of how to
2946 use the API. Fixed various places in the code to use the new
2947 SilcList API. The SilcList is meant for lists that has a structure
2948 already defined as a list. It is not suitable to add just some
2949 context to the list (in TRQ, the context is the list actually).
2951 So, I defined SilcDList that can be used for the purpose where
2952 predefined list structure does not exit. This can be used as
2953 such list. Now some context just can be added to the SilcDList.
2954 Currently this list is not used in the SILC just yet, though there
2955 are a lot places where this can replace dynamically allocated
2956 tables and I will fix these places, later, to use SilcDList.
2957 See lib/trq/silcdlist.h for SilcDList (they are all inline functions,
2958 and use TRQ internally).
2960 Also fixed some annoying warning messages that the original TRQ
2961 code generated. Also minor changes to TRQ's Makefile.in.
2963 * Added support for querying by Client ID to both WHOIS and
2964 IDENTIFY commands into server, as required by the protocol.
2966 * Removed method function pointers from SilcBuffer structure. They
2967 weren't used to anything and just increased the context size for
2968 no good reason. This change also made silc_buffer_alloc and
2969 silc_buffer_free functions inline functions.
2971 * Disabled command flooding detection support until it's fixed so
2972 that it accepts commands in but does not execute them more than once
2975 * Added silc_net_localhost(), to return local hostname, into
2976 lib/silcutil/silcnet.[ch]. Also added client->hostname pointer
2977 that must be initialized before calling silc_client_init.
2979 * Added new function: silc_server_send_notify_on_channels to send
2980 notify messages to all channels client has joined. It is assured
2981 that the message is sent only once per client.
2983 * Moved silc_log_format (from lib/silcutil/silclog.[ch] into
2984 lib/silcutil/silcutil.[ch] as silc_format function. The new
2985 function is generic and is used by server as well, not only by
2986 the logging routines.
2988 * Added new SKE status type: SILC_SKE_STATUS_BAD_VERSION to indicate
2989 the provided version string was not acceptable. Added new function:
2990 silc_ske_check_version into lib/silcske/silcske.h. The function
2991 must be implemented by the application (client or server) and it
2992 does not reside in the SKE library. The function checks the version
2993 string remote end sent.
2995 * Added back pointers (to opaque context and to SilcSocketConnection)
2996 into SilcPacketContext structure into lib/silccore/silcpacket.h.
2998 * Added silc_packet_context_dup into lib/silccore/silcpacket.[ch] to
2999 duplicate packet context structure.
3001 * Changed `notify' client operation to send same arguments as client
3002 receives from server except for ID's. ID's are mapped to correct
3003 ID entry and that is returned. Also, if channel entry is not sent
3004 by server but the notify is for channel the channel entry is sent
3005 to application (otherwise application doesn't know that it is for
3006 channel (library gets it from packet's Destination ID)).
3008 * Added silc_client_remove_from_channels into client library to
3009 remove a client from all channels it has joined to. Used when
3010 received SIGNOFF notify from server. Added also new function
3011 silc_client_replace_from_channels to replace old ID entry with
3012 new ID entry on all channels. Used when received NICK_CHANGE
3015 * Fixed ID Cache list handling in silc_idlist_get_client in
3016 lib/silcclient/idlist.c. Also, added silc_idlist_get_client_by_id
3017 to get (or query) client by ID.
3019 * Updated TODO list.
3021 * Added connection authentication status message defined by the
3022 protocol: SILC_CONN_AUTH_OK and SILC_CONN_AUTH_FAILED and added the
3023 support for these into the code in client and server side.
3025 * Added generic function silc_client_send_command to send any command
3026 with variable argument list. Application should use this function
3027 to send commands if the command functions provided by the library
3028 does not suite for the application's user interface needs.
3030 * Added new `failure' client operation. Application is notified about
3031 received failure packet if client is executing a protocol. In this
3032 case the protocol's execution has failed.
3034 * Added SKE's end notify to send the SKE_SUCCESS notify message that
3035 is required by the protocol.
3037 * Added SILC_PROTOCOL_STATE_FAILURE to indicate received failure
3038 packet from remote. SILC_PROTOCOL_STATE_ERROR indicates local
3041 * Added status flag to SilcSKE object to indicate realtime status
3042 of the SKE protocol.
3044 * Application receives now exactly same command reply arguments as
3045 the library receives from server. However, if ID is received the
3046 corresponding ID entry is returned to the application (eg. Client
3047 ID is mapped to correct SilcClientEntry entry and that is returned).
3048 Changed command_reply client operation due to this change.
3050 * Changed all ID's in commands and in command replys as ID Payloads.
3051 Change affected both client and server side codes.
3053 All ID's sent in SILC network (with execption of ID's in SILC
3054 Packet header) are sent in ID Payload to support variable length
3057 * Server now notifies nick changes and notifies all clients on
3058 the channels about the new nickname (about the new Client ID,
3061 * Implemented CMODE command to change channel modes. Supports all
3062 channel modes defined by the protocol specs except ban and invite
3063 lists. (Also, private channel key mode is supported but support for
3064 setting private channel key in client is missing, thus, this mode
3065 has no effect on client side (except that server requires that the
3066 client uses private channel key and normal channel traffic does not
3069 Also, invite mode works per se, but INVITE command does not work
3070 yet correctly, so you can set channel as invite only channel but
3071 inviting clients to the channel does not work (it is yet to be
3072 thought what's the best way to do it).
3074 * Added new command SILC_COMMAND_CUMODE to change user mode on the
3075 channel. Defined user modes: CHANNEL_FOUNDER and CHANNEL_OPERATOR.
3076 Implemented CUMODE command to change user's mode on the channel.
3077 Supports all modes defined by the protocol specs.
3079 * Added NAMES command reply to return users modes on the channel.
3081 * Removed unnecessary and slow ciphers from lib/silccrypt.
3083 * Set SO_KEEPALIVE option to connection sockets by default.
3085 * Added new command reply status: SILC_STATUS_USER_NOT_ON_CHANNEL.
3087 * Added notify types: MOTD, CMODE_CHANGE and CUMODE_CHANGE. Also,
3088 redefined the Notify Payload into protocol specs.
3090 * Added silc_id_payload_parse_id to get ID directly from raw
3093 Mon Oct 9 20:57:02 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3095 * Changed SILC_COMMAND_IDENTIFY in protocol specification to
3096 accept searching by Client ID as well.
3098 * Added support for LEAVE and SIGNOFF notify types in client library.
3100 * Added silc_id_payload_parse_data into lib/silccore/silcpayload.[ch]
3101 to parse ID Payload from raw data.
3103 Sun Oct 8 19:33:08 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3105 * Added flags parameter into silc_ske_assemble_security_properties
3106 function in lib/silcske/silcske.[ch].
3108 * Changed notify client operation to fit better for notify messages
3109 sent by server. The notify payload received from server is now
3110 passed to the application (after parsing it to SilcNotifyPayload).
3111 It is application's responsibility to retrieve the arguments
3112 from the payload and show the message the way it wants. The message
3113 sent by server is implementation specific.
3115 * Changed public keys to comply with the protocol specification.
3116 Old public keys are not supported anymore and are not compatible.
3118 * Removed nickname from Channel Payload as the latest draft removed
3119 it. The client must resolve the nickname from the NAMES command
3120 reply received when it joined the channel.
3122 Also, changed all channel_xxxx_payload to channel_payload_xxxx.
3124 Sat Oct 7 21:55:01 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3126 * Fixed some errors in protocol specification drafts.
3128 * Created lib/silccore/silcnotify.c to implement Notify Payload
3129 encoding and decoding, lib/silccore/silcpayload.[ch] to implement
3130 generic payloads described by protocol specifications. The file
3131 includes implementations for ID Payload and Argument Payload.
3133 * Changed Command Payload implementation to use the new Argument
3134 Payload. Changed command_xxxx_payload to command_payload_xxxx
3135 to comply with SILC coding conventions.
3137 * Added suppport for Argument Payload handling in Notify Payload
3138 implementation as protocol requires it. Added the new support
3139 into server and client lib as well.
3141 Thu Oct 5 21:16:28 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3143 * Added support for multiple nicknames on same channel. [n] is
3144 added locally to the nickname if there are more than one same
3145 nicknames on the channel.
3147 * Server now sends all nicknames that matched WHOIS request.
3148 Client also shows the list received from server.
3150 * Added TOPIC command to client side. User can now set and show
3151 current topic on channel.
3153 * Added MOTD command to client and server. Also, server sends the
3154 motd when client connects to the server.
3156 * Changed version strings to comply ISO 8601.
3158 Wed Oct 4 23:29:06 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3160 * Fixed protocol error handling in client library. It should now
3161 cope even if the SKE fails for some reason.
3163 * Made new protocol specification drafts for submitting to IETF.
3165 * Implemented TOPIC command to server in silcd/command.c.
3167 * Added two new notify types into lib/silccore/silcnotify.h:
3168 SILC_NOTIFY_TYPE_NICK_CHANGE and SILC_NOTIFY_TYPE_TOPIC_SET to
3169 notify nickname change and topic setting/change on a channel.
3171 * API change of command_reply operation in client library. The
3172 application gets now the status type received from server as well.
3174 Sat Sep 30 16:57:42 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3176 * Removed the function just added to lib/silcutil/silcschedule.[ch].
3178 * Cras fixed and optimized the packet handling even further and
3179 it should work now. Minor change to the prototype of function
3180 silc_packet_receive_process in lib/silccore/silcpacket.[ch].
3182 Sat Sep 30 08:48:47 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3184 * Added new function into lib/silcutil/silcschedule.[ch]:
3185 silc_schedule_with_fd to select() a specified fd. The function
3186 returns after timeout expires or data arrives or goes. The
3187 function is used by packet routines to wait that all data is
3188 received from network.
3190 * Fixed data reading from network in lib/silccore/silcpacket.c.
3191 The code now assures that all data is read from the fd and then
3192 continues packet processing. This was a bug fix since the code
3193 used to drop some data in some circumstances.
3195 * Added new function into lib/silcclient/client.[ch]:
3196 silc_client_start_key_exchange to start key exchange after
3197 connection has been established to server. The code internally
3198 now uses this funtion but its main purpose was to provide it
3199 for applications that perform their own connecting. After
3200 application has created a connection it merely calls this
3201 function to start the key exchange between client and server.
3202 The library takes care of everything else after that.
3204 Updated also lib/silcclient/README to explain the usage of
3207 * Do not send to application information that connection has
3208 been established. Application gets notified it by connect
3211 Thu Sep 28 23:40:19 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3213 * Applied cras's patch to add silc_schedule_one function. The
3214 function runs scheduler once and returns.
3216 * Fixed the scheduler after cras messed it up. The timeout
3217 handling works now as it's supposed to work.
3219 * Added into lib/silccore/ silcnotify.h to include notify
3220 message types support. Changed silc_server_send_notify*
3221 functions, in server.[ch], to support those new notify types.
3222 Added the support for the notify types into client library,
3223 as well. Added new notify client operation into ops.h in
3226 * Changed silc_server_packet_send_to_channel to send normal
3227 packets instead of just channel message packets. The function
3228 is now used to send the notify packets to channels. It is not
3229 used to send channel message packets anymore, as server never
3232 * Added explicit casting into lib/silcutil/silcbuffmt.c to few
3233 va_arg()s as it seems to require it nowadays. I guess, if SILC
3234 is compiled with older va_arg() the new code should work anyway.
3236 Wed Sep 13 18:10:14 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3238 * Splitted core library. Core library (lib/silccore) includes
3239 now only SILC protocol specific core (and common) components.
3240 Created new utility library (lib/silcutil) that includes more
3241 generic purpose stuff. The stuff for util library was taken
3242 from the old core library. This was minor and easy split.
3244 * Created SILC Client Library (lib/silcclient) that includes
3245 implementation of the SILC client without user interface. This
3246 was major move from silc/ directory. The code has been changed
3247 so that it is transparent towards the user interface. The
3248 silc/ directory includes now the same user interface as before
3249 and it uses the new client library. Read lib/silcclient/README.
3250 Basicly, the client library performs everything else related
3251 to SILC except user interface handling. Also, configuration
3252 files are considered to be part of user interface and library
3253 does not handle them.
3255 This change also changed a lot of structures, function naming etc.
3256 Most important change was that SilcClientWindow object was
3257 renamed to SilcClientConnection in the client library. Created
3258 also new file lib/silcclient/ops.h. Also added new files
3259 silc/local_command.[ch] and silc/client_ops.[ch].
3261 All these changes were made to make it easier for user interface
3262 designers to create what ever user interface for the SILC client
3265 It is also expected that the server will be moved to lib
3266 directory as well and SILC Server Library will be created;
3267 sometimes in the future.
3269 * Removed Local commands from lib/silccore/silccommand.h as
3270 they are application specific and new client library does not
3271 handle any of those anymore.
3273 * Several functions moved to lib/silcutil/silcutilc.[ch] from
3274 old client implementation in silc/.
3276 * Added support for callback functions in SILC_LOG_* macros.
3277 Application can now set its own callbacks that will be called
3278 instead of using the default functions that will always print
3279 the debug messages to stderr (or stdout). Also, debugging can
3280 now be disabled by setting silc_debug to FALSE and re-enabled by
3281 setting it to TRUE. Note, that logging will still work even
3282 if debugging is disabled.
3284 New functions in lib/silcutil/silclog.[ch]: silc_log_set_callbacks,
3285 silc_log_reset_callbacks, silc_log_set_debug_callbacks and
3286 silc_log_reset_debug_callbacks.
3288 * To enable debugging in silc client one must give now -d
3289 option on command line.
3291 * Changed silc_schedule_init to automatically allocate task queues
3292 if they are not allocated before calling it.
3294 Thu Sep 7 10:49:33 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3296 * Added GMP 3.1 into math library.
3298 Sun Aug 20 21:27:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3300 * Added SILC_PACKET_REMOVE_CHANNEL_USER to remove a client from
3301 a channel in SILC network. The packet is used by servers and
3302 routers to notify other routers that user has left a channel.
3303 This little feature was missing until now. Added the feature
3304 to protocol specification as well.
3306 Added functions: silc_server_send_remove_channel_user and
3307 silc_server_remove_channel_user into server.[ch].
3309 * Added SILC_PACKET_REKEY and SILC_PACKET_REKEY_DONE into
3310 lib/silccore/silcpacket.h. However, they are not implemented
3313 Sat Aug 19 23:04:16 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3315 * Fixed joining to a channel and sending channel messages
3316 between server and router. The channel message sending should
3317 now work inside a cell.
3319 Tue Jul 25 20:46:13 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3321 * Fixed the private message sending between server and router.
3322 The private message sending should now work inside a cell.
3324 * Added silc_server_replace_id into server.[ch] to replace
3325 existing ID in the SILC network.
3327 * Added silc_idlist_find_server_by, silc_idlist_replace_client_id
3328 and silc_idlist_replace_server_id into idlist.[ch] in server.
3330 Mon Jul 24 18:33:31 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3332 * Fixed the server to server connections. Server can again now
3333 connect to router. Router to router connections probably does
3336 Thu Jul 20 13:15:01 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3338 * Added dynamic protocol registering support. Now protocols can
3339 registered and unregistered on the fly. Patch by cras.
3341 Wed Jul 19 19:08:46 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3343 * Added lib/contrib directory to hold routines that some platforms
3344 don't have but are needed by SILC.
3346 * Added getopt.c, getopt1.c and getopt.h from GNU C library
3347 into lin/contrib to provide getopt() and getopt_long() for
3348 those who don't have it.
3350 Tue Jul 18 20:41:20 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3352 * Added AWAY command to client. When away message is set and
3353 client receives a private message packet the client automatically
3354 replies to the sender with the away message.
3356 * Fixed a bug in lib/silcmath/mpbin.c: silc_mp_mp2bin. This
3357 bug seemed to be the cause of recent problems when compiling
3360 * Added version detection support to SKE protocol specification
3361 and added the new changes to the SKE implementation as well.
3362 There were other minor changes in the SKE protocol as well.
3364 Many changes in lib/silcske/silcske.[ch] and in
3365 lib/silcske/payload.[ch].
3367 * Added ^U functionality, clear input line. Patch from cras.
3369 Mon Jul 17 23:33:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3371 * Mainly small bugfixes on core library. Fixed some debugging
3372 logging and buffer overflow in silclog.c.
3374 * Updated config.sub and config.guess on the distribution tree.
3376 Sat Jul 15 15:33:48 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3378 * Added command lagging support in server. Client may execute
3379 commands now only once in two seconds.
3381 Thu Jul 13 22:10:21 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3383 * Optimized packet reception. MAC computation and checking is now
3384 also more optimized. A lot previously duplicated code is now
3385 used as generic by both client and server.
3387 * Fixed key pair generation in clientutil.c
3389 Wed Jul 12 18:28:07 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3391 * Added into lib/silccore/silcbufutil.[ch] new function;
3392 silc_buffer_realloc.
3394 * Moved generic packet sending/encryption functions to
3395 lib/silccore/silcpacket.[ch] from client and server. Some
3396 rewriting of the functions.
3398 * Moved all generic packet reception/decryption functions to
3399 lib/silccore/silcpacket.[ch] from client and server. The
3400 packet processing is now much cleaner in both client and server.
3401 These were major changes in both client and server.
3403 * Created many common functions in server to do packet sending.
3404 Previously code were duplicated a lot, this has been removed
3407 Tue Jul 11 20:27:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3409 * Rewrote major parts of the ID cache system. Don't know
3410 whether it is better now or not but at least the API is more
3413 * Major rewrite on ID cache stuff on client because of the ID
3414 cache API changes. Added idlist.c to client.
3416 * Also major rewrite on ID cache stuff on server as well.
3417 Major rewrite of idlist.[ch]. SilcXXXList's are now named
3418 SilcXXXEntry's. We won't keep anymore idlist specific pointers
3419 in hand, instead they are all put into the ID cache system now.
3420 All server_idlist_* routines uses ID cache now instead of
3421 traversing its own lists (those lists does not exist anymore).
3422 SilcIDList though still exists. Also, SilcXXXEntry's are
3425 Sun Jul 9 15:19:24 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3427 * Finally made the SKE implementation compliant to the protocol
3428 specification. All mp integers are now binary encoded as
3429 opposed being HEX encoded.
3431 * Added lib/silcmath/mpbin.[ch]. Encoding mp intergers to and
3434 * Added into lib/silccore/silcutil.[ch] PEM encoding/decoding
3435 functions: silc_[encode/decode]_pem. Also added function
3436 silc_encode_pem_file to PEM encode with newlines ('\n') for
3439 * SILC public keys are now encoded either PEM or binary. Same
3440 option is for private keys as well. By default private keys
3441 are binary encoded and public keys PEM encoded. Silly HEX
3442 encoding were removed.
3444 * Added into lib/silccrypt/silchash.[ch] silc_hash_fingerprint
3445 function to create fingerprints.
3447 * Fixed a bug in SHA1; does not change the original data anymore.
3449 * Partly implemented INFO command on client and server side.
3450 Fixed CLEAR command. Changes to SERVER command; show current
3451 server(s) when giving command without arguments. Added
3452 VERSION command to client.
3454 * Added check to server that unregistered connections cannot
3455 execute commands (unless it is specificly allowed).
3457 Thu Jul 6 18:12:24 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3459 * Fixed screen refresh.
3461 * Fixed channel joining bug from client. On some circumstances
3462 client tried to join to a channel it had already joined.
3464 * Added public key verification process into client's protocol.c.
3465 The client now verifies the public key from user and saves
3466 it into ~./silc/serverkeys/ directory.
3468 Added into: clientutil.[ch]: silc_client_verify_server_key.
3470 * Changed SKE protocol's silc_ske_initiator_finish function
3471 to accept callback function that verifies the received public
3472 key. Removed old silc_ske_verify_public_key function.
3474 Wed Jul 5 19:19:02 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3476 * Added into silcpkcs[ch]: silc_pkcs_public_key[_data]_set and
3477 silc_pkcs_private_key[_data]_set.
3479 * Made the password and public authentication more cleaner in
3480 server's protocol.c.
3482 * Removed historic and obsolete protocol `channel_auth' from
3483 both client and server.
3485 * Removed wrong way of sending command status messages from
3486 server to client in server's command.c. The old way violated
3487 protocol specification.
3489 Changes to silccore/silccommand.[ch]: removed
3490 silc_command_encode_status_payload -> not needed anymore,
3491 changed silc_command_encode_payload_va to accept extra
3492 argument on variable argument list. The argument type must
3493 now be provided to the function. Also, added new function:
3494 silc_command_encode_reply_payload_va which is same as
3495 normal command_encode_payload_va except command status type
3496 is provided as extra argument.
3498 Tue Jul 4 18:26:39 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3500 * Added ~./silc directory handling. The directory includes the
3501 public and private keys for the client.
3503 Added silc_client_check_silc_dir, silc_client_create_identifier
3504 and silc_client_load_keys.
3506 * Implemented SILC protocol compliant public key. Added public
3507 and private key saving to and loading from files.
3509 Added into silcpkcs.[ch]: silc_pkcs_encode_identifier,
3510 silc_pkcs_public_key_encode[_data], silc_pkcs_public_key_decode,
3511 silc_pkcs_private_key_encode[_data], silc_pkcs_private_key_decode,
3512 silc_pkcs_public_key_alloc, silc_pkcs_public_key_free,
3513 silc_pkcs_private_key_alloc and silc_pkcs_private_key_free.
3515 Implemented: silc_pkcs_save_[public/private]_key[_data] and
3516 silc_pkcs_load_[public/private]_key.
3518 Mon Jul 3 18:51:27 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3520 * Added silc_server_get_route (route.[ch]) to get connection
3521 data for the fastest route for given ID.
3523 * Implemented INVITE command on client and server. The command
3524 were re-defined in the SILC Protocol Specification and the
3525 implementation now complies with the specification.
3527 * Implemented PING command on client and server.
3529 * Implemented NAMES command on client and server. The server side
3530 supports currently only normal server not router server yet.
3531 Some changes to NAMES definition in SILC protocol specification.
3533 Sun Jul 2 18:23:01 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3535 * Implemented LEAVE command on client and server.
3537 * Previously deprecated SILC_PACKET_FORWARDED flag is now in use
3538 again. This change was made to the protocol as well. Server
3539 should not violate the protocol specification anymore.
3541 Fri Jun 30 14:03:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
3543 * Added SOCKS4 and SOCKS5 support to SILC client. SOCKS5
3544 was tested. SOCKS4 was not but should work anyway.
projects / silc.git / blob