1 Sun Apr 1 19:49:34 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
3 * Added SILC_UMODE_GONE mode to indicate when the client is not
4 present in the SILC network. Added also support to the local
5 command AWAY that will set this mode. Added support of showing
6 "xxx is gone" in WHOIS command. The USERS command shows the
9 * Fixed setting server and router operator privileges in the
10 server's UMODE command. Affected file silcd/command.c.
12 * Merged the SKE KE1 and KE2 payloads into one payload. The
13 new KE payload is equivalent to the old KE2 payload.
15 Cleaned up the SKE Start Payload parsing. It now uses the
16 simple buffer unformatting to do the parsing. A lot faster
19 Added new Mutual Authentication flag (SILC_SKE_SP_FLAG_MUTUAL)
20 to the SKE that is used to indicate whether both of the SKE
21 parties should perform authentication. By default only the
22 responder performs authentication. By setting this flag also
23 the initiator must do authentication. By default it is unset
24 since in normal SKE case, client to server connection, only
25 the responder should do authentication. When doing SKE between
26 two clients both should perform authentication. Updated the
27 code and the protocol specs.
29 * A little fix to IDENTIFY command in the server. Search the
30 client first by hash not nickname. Affected file is
33 * Fixed the silc_client_close_connection to support closing
34 the client to client connections wihtout deleting too much
35 data. Affected file lib/silcclient/client.c.
37 * Fixed a fatal bug in server and client; if KE1 or KE2 packets
38 are received if protocol used to be active but is not anymore
39 the application would crash due to NULL pointer dereference.
40 Affected files silcd/server.c and lib/silcclient/client.c.
42 * Added `hash' field to the SilcClientConnection to include
43 the hash function negotiated in the SKE protocol.
45 * Added new channel mode SILC_CMODE_FOUNDER_AUTH that is used
46 to set the channel founder authentication data. A client can
47 claim the founder rights later by providing the authentication
48 data to the CUMODE command using SILC_CUMODE_FOUNDER mode.
49 This way the channel founder can regain the channel founder
50 privileges even it is left the channel. This works only on
51 local server and the client must be connected to the same
52 server to be able to regain the founder rights. Updated the
53 protocol specs accordingly.
55 Added support to the CMODE command in the client to set the
56 founder auth data. Read the README to see how to set it.
58 Added support to the CUMODE command to claim the founder
59 rights. Read the README to see how to do it.
61 Added support for the founder authentication to the Channel
62 Entry in the server. Affected file silcd/idlist.h.
64 Added support for the SILC_CMODE_FOUNDER_AUTH mode in the
65 server's CMODE command. Affected file silcd/command.c.
67 * Added the following new functions into lib/silccore/silcauth.[ch]:
68 silc_auth_get_method and silc_auth_get_data.
70 * The server now saves the remote hosts public key to the
71 SilcIDListData pointer. Affected file silcd/protocol.c.
73 * The normal server now does not remove the channel entry from
74 the cache if the founder authentication data is set. It used
75 to remove it if the founder was the last one on the channel on
76 the server and left the channel. The auth data is saved and
77 if the channel is re-joined later the old entry is used with
78 the old auth data. Affected files silcd/command_reply.c and
81 Sat Mar 31 15:38:36 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
83 * Fixed packet processing on slow links. Partial packets were
84 never re-processed because the incoming data buffer was cleared
85 by the application. Application must not directly clear the
86 sock->inbuf, the packet processing routines handle it. Fixed
87 this in client library and in server.
89 Fri Mar 30 16:35:27 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
91 * Fixed the WHOIS and IDENTIFY send reply function to really
92 check whether to send list or just one entry. Affected file
95 * Cleaned up the LEAVE command's channel key distribution. The
96 affected file silcd/command.c.
98 * Changed CMODE_CHANGE's <Client ID> to <ID Payload> as server
99 can enforce the channel mode as well. In that case the ID
100 includes the ID of the server. The code now enforces the
101 mode change if the router have different mode than the server.
103 * The notify client operation with CMODE_CHANGE notify can now
104 return NULL client_entry pointer if the CMODE was not changed
105 by client. Application must check for this.
107 * Added <Server ID> argument to INFO command to support server
108 info fetching by Server ID.
110 * Added silc_server_announce_get_channel_users to get assembled
111 packets of channel users of the specified channel. Affected
112 file silcd/server.[ch].
114 * Fixed bug in CHANNEL_CHANGE notify in the server. The new ID
115 was freed underneath the ID Cache.
117 * Re-announce clients when the server received CHANNEL_CHANGE
118 notify from the router. Affected file silcd/packet_send.c.
120 Thu Mar 29 19:10:28 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
122 * Fixed a fatal bug when client does /join 1 2 3 4 5 6 the server
123 crashed since it did not handle the fact that there is no cipher
124 called "3" and didn't check the error condition. Now fixed.
126 * Added SILC_MESSAGE_FLAG_REQUEST message flag as generic request
127 flag. It can be used to send message requests.
129 Thu Mar 29 12:26:25 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
131 * Implemented the RESTART command in the client.
133 * Added SILC_MESSAGE_FLAG_NOTICE message flag for informational
134 notice type messages. Added notice printing to the user
137 * The channel keys are not re-generated if the channel's mode
138 is PRIVKEY, ie private key on the channel exists. Affected
139 files silcd/server.c and silcd/command.c.
141 * Fixed a little bug in channel message delivery when channel
142 private keys are set in the server. Affected file is
145 * Changed the setting on channel->on_channel = TRUE from the
146 silc_client_save_channel_key to the JOIN command reply. The
147 key payload is not received if the private channel key is set.
148 Affected file lib/silcclient/command_reply.c and the
149 lib/silcclient/client_channel.c.
151 * When the CMODE_CHANGE notify is sent and the channel private
152 key mode is removed the channel key must be re-generated in
153 other cells as well. Added this support for the router in the
154 silcd/packet_receive.c.
156 * Added new local command NOTICE to send notice message on
157 channel. Affected file silc/local_command.[ch].
159 Wed Mar 28 23:55:54 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
161 * Added new local command ME to the client. It is used to send
162 message to a channel with SILC_MESSAGE_FLAG_ACTION to indicate
163 some action. Affected file silc/local_command.[ch].
165 * Changed channel_message and private_message client operations
166 to deliver the message flags to the application. Added also
167 the `flags' arguments to the silc_client_send_channel_message
168 and silc_client_send_private_message functions. Affected file
171 Wed Mar 28 20:50:47 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
173 * Redefined the Private Message Payload to support private message
174 keys and to support the new private message flags. Updated
175 the protocol specs. Flags makes it possible to have for example
178 * Added new type SilcPrivateMessagePayload and defined an API
179 for it in the lib/silcclient/silcprivate.[ch].
181 * Tested private message private keys successfully. Tested the
182 private message key set, unset and list commands with the new
185 * Redefined the Channel Message Payload to include the channel
186 message flags (equal with private message flags) to support
187 for example CTCP style messages.
189 * Defined some of the message (for channel and private message)
190 flags. Updated the protocol specs and added the flags to the
191 lib/silccore/silcchannel.h. The type is SilcMessageFlags.
193 Wed Mar 28 15:52:36 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
195 * Added SilcKeyAgreementStatus type to the key agreement routines
196 to indicate the current status and error if one occured.
197 The status types are defined in the lib/silcclient/silcapi.h.
199 * Added new local command KEY that is used to set and unset private
200 keys for channels, set and unset private keys for private messages
201 with remote clients and to send key agreement requests and
202 negotiate the key agreement protocol with remote client. The
203 key agreement is supported only to negotiate private message keys,
204 it currently cannot be used to negotiate private keys for channels,
205 as it is not convenient for that purpose.
207 * Fixed a minor pending callback setting bug in the function
208 silc_client_get_client_by_id_resolve, now the function works.
209 Affected file lib/silcclient/idlist.c.
211 * Added function silc_net_get_local_port to get local bound
212 port by socket. Added to lib/silcutil/silcnet.[ch].
214 * Added `sockets' and `sockets_count' fields to the SilcClient
215 object. They hold the sockets of the listenning sockets in
216 the client. Listenning sockets may be for example the key
217 agreement server. Affected file lib/silcclient/client.[ch].
218 Added functions the silc_client_add_socket and the
219 silc_client_del_socket. They are exported to the application
222 * Added ~./silc/clientkeys to support other client's public keys.
224 * Renamed verify_server_key client operation to verify_public_key
225 and added one argument to indicate the type of the connection
226 (server, client etc.).
228 Tue Mar 27 22:22:38 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
230 * Added silc_server_connection_auth_request to handle the
231 incoming CONNECTION_AUTH_REQUEST packet. Affected file is
232 silcd/packet_receive.[ch].
234 * Added silc_server_send_connection_auth_request into the
235 silcd/packet_send.c to send the connection auth request packet.
237 * Cleaned up the silcd/protocol.c a bit and fixed some memory
240 * Fixed the public key authentication in responder side in the
241 server. The `auth_data' pointer includes the SilcPublicKey
242 not the path to the public key. Affected file silcd/protocol.c.
244 * Implemented the public key authentication in the initiator side
245 in the server. Affected file silcd/protocol.c.
247 * Removed the [RedirectClient] config section from the server
248 configuration. Is not needed and I don't want to implement it.
250 Tue Mar 27 12:49:56 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
252 * Cleaned up the CMODE command in the server. It now works
253 correctly and supports all the modes defined in the protocol.
254 Affected file is silcd/command.c.
256 * Added `hmac_name' field to the SilcChannelEntry in the server
257 to hold the default HMAC of the channel. It can be set when
258 creating the channel (with JOIN command). Affected files
261 * Added <cipher> and <hmac> argument to the CMODE_CHANGE notify
262 type to indicate the change of the current cipher and hmac
263 on the channel. Client can safely ignore the <cipher> argument
264 (if it chooses to do so) since the CHANNEL_KEY packet will
265 force the channel key change anyway. The <hmac> argument is
266 important since the client is responsible of setting the new
267 HMAC and the hmac key into use.
269 * Fixed the CMODE command in the client library as well.
271 * Tested CMODE command in router environment successfully.
273 Mon Mar 26 14:39:48 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
275 * Show the version of the remote client (or server) when connecting
276 to the server. It is logged to the log file. Affected file
279 * Fixed the KILLED notify handling in the client library. The
280 client must be removed from all channels when receiving the
283 Also, do not remove the client entry when giving the KILL
284 command but when the KILLED notify is received.
286 * Removed silc_idlist_find_client_by_nickname from the server.
287 Not needed anymore. Affected files silcd/idlist.[ch].
289 * Implemented the CHANNEL_CHANGE notify type handling to the
290 server. Affected file silcd/server.c.
294 Mon Mar 26 12:11:14 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
296 * Added silc_server_send_notify_invite to send the INVITE
297 notify between routers.
299 * Implemented the INVITE command correctly to the server.
301 * Implemented the INVITE notify type handling in the server.
303 * Implemented the INVITE command to the client library and on the
306 Sun Mar 25 20:27:09 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
308 * Added function silc_server_get_client_resolve to find the
309 client entry by ID from all ID lists and then resolve it
310 (using WHOIS) if it cannot be found. Affected file is
313 Sun Mar 25 13:52:51 EEST 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
315 * Implemented the BAN command to the client library.
317 * The JOIN command in the server now checks the invite list
320 * Changed the silc_command_reply_payload_encode_va and the
321 silc_command_payload_encode_va to support that if argument is
322 NULL it ignores and checks the next argument. Affected file
323 lib/silccore/silccommand.c.
325 * Added silc_server_send_notify_ban to send the BAN notify
326 type between routers.
328 * Chaned the silc_notify_payload_encode to support that if
329 argument is NULL it ignores and checks the next argument.
330 Affected file lib/silccore/silcnotify.c.
332 * Tested ban lists in router environment successfully.
334 Sat Mar 24 14:47:25 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
336 * Implemented BAN command to the server, in silcd/command.[ch].
338 * Removed the BAN and INVITE_LIST modes from the CMODE command
341 * Added function silc_string_match to regex match two strings.
342 Affected files lib/silcutil/silcutil.[ch].
344 Fri Mar 23 22:02:40 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
346 * Redefined parts of the SilcChannelEntry in the server to support
347 the new ban and invite lists.
349 Fri Mar 23 16:25:11 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
351 * Redefined the INVITE command. The same command can be used to
352 invite individuals to the channel but also to manage the invite
353 list of the channel (to add to and remove from the invite list).
354 Updated the protocol specs.
356 * Added new command SILC_COMMAND_BAN that can be used to manage
357 the ban list of the channel. Updated the protocol specs.
359 * Removed the channel modes: the SILC_CMODE_BAN and the
360 SILC_CMODE_INVITE_LIST as they were a bit kludge to be included
361 in the CMODE command. The equivalent features are now available
362 using INVITE and BAN commands. Updated the protocol specs.
364 * Added new SILC_NOTIFY_TYPE_BAN notify type to notify routers
365 in the network about change in the current ban list. The notify
366 type is not used by the client.
368 * Redefined parts of the SILC_NOTIFY_TYPE_INVITE command to
369 support the invite lists.
371 Thu Mar 22 22:52:23 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
373 * Added new function silc_string_regexify that converts string
374 including wildcard characters into regex string that can
375 be used by the GNU regex library. Added into the file
376 lib/silcutil/silcutil.[ch].
378 Added silc_string_regex_combine to combine to regex strings
379 into one so that they can be used as one regex string by
380 the GNU regex library. Added into the file
381 lib/silcutil/silcutil.[ch].
383 Added silc_string_regex_match to match two strings. It returns
384 TRUE if the strings match. Added into lib/silcutil/silcutil.[ch].
386 Thu Mar 22 15:29:42 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
388 * Imported GNU regex to the soruce tree into lib/contrib.
389 Fixed some compiler warning from the regex.c.
391 Wed Mar 21 15:27:58 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
393 * Fixed MOTD command in the server to work in router environment.
395 * Fixed the MOTD command in the client library to support
396 the server argument in the command.
398 * Added `nickname_len' argument to the silc_idlist_add_client
399 in the server, as the `nickname' argument may be binary data
402 * Added silc_idlist_get_channels to return all channels from
405 * Implemented LIST command to the server. Affected file is
408 * Implemented the LIST command to the client library and on the
411 * Added [<user count>] argument to the LIST command reply.
412 With private channels the user count is not shown.
414 * Updated TODO and README.
416 Tue Mar 20 21:05:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
418 * The client entry's data.registered must be TRUE even with
419 global client entry on global client list. The data.registered
420 is used to check whether the client is anymore in the network,
421 for example with WHOWAS command so it must be valid.
423 * Fixed the WHOWAS command in the server. It now actually works
424 in router environment. Added function into silcd/command_reply.c
425 silc_server_command_reply_whowas_save.
427 * Added silc_idlist_purge function to the silcd/idlist.c
428 to periodically purge the ID Cache.
430 * Fixed INFO command in the server. It works now in router
431 environment. Added <server name> argument to the INFO command
432 reply. Updated the protocol specs.
434 * Fixed minor bug in silc_idcache_purge to not purge if the
435 expire value is zero.
437 * Fixed various bugs in WHOIS and IDENTIFY command handling as
438 they were buggy because of the WHOWAS information.
440 * Fixed local command MSG to handle the async resolving of
441 the remote client properly. It used to fail the first MSG.
442 Affected file silc/local_command.c.
444 * Added `data_len' field to SilcIDCache context.
446 Tue Mar 20 16:29:00 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
448 * Update TODO. Todo in commands in the server.
450 Tue Mar 20 15:45:14 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
452 * Added new notify type SILC_NOTIFY_TYPE_UMODE_CHANGE that is
453 used by routers as broadcast packet to inform other routers
454 about the changed user mode.
456 Implemented the notify handling in the server. Affected file is
457 silcd/packet_receive.c. Added the function
458 silc_server_send_notify_umode to the silcd/packet_send.[ch].
460 * Added new generic Channel Payload and deprecated the New Channel
461 Payload. The New Channel Payload is now the generic Channel
464 * Added new argument `mode' to the silc_server_send_new_channel
465 as it is required in the Channel Payload now.
467 * Renamed the SilcChannelPayload to SilcChannelMessagePayload
468 and created a new and real SilChannelPayload to represent the
469 new generic Channel Payload. Implemented the encode/decode
470 for Channel Payload. Affected file lib/silccore/silcchannel.[ch].
472 * Added silc_server_get_client_channel_list to return the list
473 of channels the client has joined for WHOIS command reply.
474 Affected file silcd/server.[ch].
476 * Implemented the channel list sending in the WHOIS command reply
477 in server and in the client.
479 Implemented the channel list displaying on the user interface
480 as well. Affected file silc/client_ops.c.
482 * Added silc_channel_payload_parse_list to parse list of Channel
483 Payloads. It returns SilcDList list of SilcChannelPayloads.
484 Client for example can use this function to parse the list of
485 channels it receives in the WHOIS command reply. The caller
486 must free the list by calling silc_channel_payload_list_free.
487 Affected files lib/silccore/silcchannel.[ch].
489 Mon Mar 19 21:39:15 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
491 * Added one new argument <user mode> to the WHOIS command reply
492 to return the mode of the user in SILC. Updated the protocol
495 Implemented it to the server and client.
497 Mon Mar 19 18:43:06 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
499 * Fixed the mode printing on the user interface on joining.
500 Affected file silc/client_ops.c.
502 * Implemented the UMODE command and user modes in general to the
503 client library and to the user interface.
505 * Implemented the UMODE command to the server.
507 * The server now sends UNKNOWN_COMMAND error status if client sends
508 unknown command. Affected file silcd/command.c.
510 * All server commands now handle the command identifier the right
511 way when sending the command reply to the client. The client can
512 use to identify the command replies with the identifier.
514 Mon Mar 19 16:13:07 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
516 * Added silc_server_get_client_route to resolve the route to
517 the client indicated by the client ID. Affected file is
520 * Added silc_server_relay_packet as general function to relay
521 packet to arbitrary destination. This deprecates functions
522 like _send_private_message_key, _relay_notify etc. Affected
523 file is silcd/packet_send.[ch].
525 Removed silc_server_send_key_agreement,
526 silc_server_send_private_message_key and
527 silc_server_packet_relay_notify functions from the file
528 silcd/packet_send.[ch].
532 * Implemented the SILC_NOTIFY_TYPE_KILLED notify handling in the
533 server. Affected file silcd/packet_receive.[ch].
535 * Implemented the KILL command to the client. Implemented the
536 SILC_NOTIFY_TYPE_KILLED notify handling in the client library.
537 Affected files lib/silcclient/command[_reply].c and
538 lib/silcclient/client_notify.c. Implemented the KILL notify
539 printing in the user inteface.
541 * Fixed a lot silc_parse_nick memory leaks from the client
542 library in the file lib/silcclient/command.c.
544 * Changed the silc_server_send_notify_on_channels's `sender'
545 argument from SilcSocketConnection to SilcClientEntry to
546 check the sender as entry and not as connection object and not
547 to send to the client provided as argument. The affected file
548 is silcd/packet_send.[ch].
550 * The notify packets that are destined directly to the client used
551 to not to be processed by the server. Now changed that and the
552 server processes all notify packets. After relaying the packet
553 to the client the notify packet is processed in the server.
555 * The silc_server_free_client_data now checks whether there is
556 pending outgoing traffic for the client and purges the data to
557 the network before removing the client entry.
559 Sun Mar 18 21:02:47 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
561 * Added SILC_NOTIFY_TYPE_KILLED notify type. It is sent when
562 an client is killed from the SILC Network. Updated the protocol
565 Added new function silc_server_send_notify_killed to the
566 silcd/packet_send.[ch].
568 * Added function silc_server_packet_relay_notify to relay notify
569 packets that are destined directly to a client. In this case
570 the server does not process the notify packets but merely relays
571 it to the client. Affected file silcd/packet_send.[ch].
573 Added also silc_server_packet_process_relay_notify to check
574 whereto relay the notify. Affected file is
575 silcd/packet_receive.[ch].
577 * Implemented the KILL command to the server.
581 * Added the backup schema desgined last fall to the protocol
582 specs for everyone to see. The specification is in the
583 *-spec-xx.txt draft and the packet type definitions for the
584 backup routers is in *-pp-xx.txt draft. Thusly, added also
585 new packet type SILC_PACKET_CELL_ROUTERS.
587 * A big security problem in the implementation discovered. The
588 signoff of an client did not cause new channel key generation
589 which it of course should've done. The channel keys must be
590 always re-generated when client leaves (or signoffs) the channel.
591 The silc_server_remove_from_channels funtion now handles
592 the channel key re-generation.
594 * Added `sender' argument to the silc_server_send_notify_on_channels
595 to not to send the client provided as argument. Affected file
596 silcd/packet_send.[ch].
598 Fri Mar 16 15:52:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
600 * Implemented OPER and SILCOPER commands into the server and
603 * Added silc_auth_verify and silc_auth_verify_data to verify
604 the authentication directly from the authentication payload.
605 It supports verifying both passphrase and public key based
606 authentication. Affected file lib/silccore/silcauth.[ch].
608 * Added `hash' field to the SilcIDListData structure. It is the
609 hash negotiated in the SKE protocol. Affected file is
612 * Slight redesigning of the SilcAuthPayload handling routines.
613 Do not send SilcPKCS but SilcPublicKey as argument.
615 * Implemented the public key authentication support to the
616 serverconfig. The public key is loaded from the provided path
617 and saved as authentication data to void * pointer. Thus,
618 changed the unsigned char *auth_data to void *auth_data;
620 * Fixed SHUTDOWN command to send the reply before the server
621 is shutdown. :) Affected file silcd/command.c.
623 * Fixed fatal bug in CONNECT command. The hostname was invalid
624 memory and server crashed. Affected file silcd/command.c.
626 * Fixed fatal bug in CLOSE command. The server_entry became
627 invalid but was referenced later in the command. Affected file
630 Thu Mar 15 12:46:58 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
632 * Fixed fatal bug in failure packet handling. Server ignored
633 the failure and thus crashed when it came.
637 Wed Mar 14 20:37:35 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
639 * Added new SILC_CF_LAG_STRICT command flag that strictly forces
640 that the command may be executed only once in (about) 2 seconds.
641 The old SILC_CF_LAG flag is same but allows command bursts up
642 to five before limiting.
644 Added the support for CF_LAG and CF_LAG_STRICT flags to the
645 server code. Various commands now includes the CF_LAG_STRICT
646 flag to disallow any kind of miss-use of the command.
648 * Fixed the silc_buffer_unformat to not to allocate any data
649 if the length of the data is zero. It used to allocate the
650 length + 1. Affected file lib/silcutil/silcbuffmt.c.
652 Wed Mar 14 16:10:30 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
654 * Changed the format of AdminConnection configuration section
655 in the server. Added username of the admin to the format.
656 Affected files silcd/serverconfig.[ch].
658 Added silc_server_config_find_admin into silcd/serverconfig.[ch]
659 to return admin configuration data by host, username and/or
662 Wed Mar 14 13:18:16 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
664 * Implemented WHOWAS command to the server. Added the functions:
666 silc_server_command_whowas_parse,
667 silc_server_command_whowas_send_reply,
668 silc_server_command_whowas_from_client and
669 silc_server_command_whowas_from_server
671 * Added <Client ID> argument to the WHOWAS command reply. Updated
672 the protocol specs accordingly.
674 * Implemented WHOWAS command and command_reply to the client
677 Implemented the WHOWAS printing on the user interface.
679 Tue Mar 13 22:17:34 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
681 * Added new argument to the WHOWAS command reply, the real name.
682 It is an optional argument. Updated the protocol specs.
684 * Added SilcIDCacheDestructor callback that is registered when
685 the SilcIDCache is allocated. The callback is called when
686 an cache entry in the ID Cache expires, or is purged from the
687 cache. Added into lib/silccore/idcache.[ch].
689 Added silc_idlist_client_destructor to the silcd/idlist.[ch]
690 to destruct the client entries when the cache entry expires.
691 Other ID Cache's in server and in the client library ignores
694 * If the ID Cache entry's `expire' field is zero then the entry
695 never expires. Added boolean `expire' argument to the
696 silc_idcache_add function in the lib/silccore/idcache.[ch].
697 If it is TRUE the default expiry value is used.
699 * Added silc_server_free_client_data_timeout that is registered
700 when client disconnects. By default for 5 minutes we preserve
701 the client entry for history - for WHOWAS command.
703 Tue Mar 13 13:26:18 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
705 * Added support to the server to enforce that commands are not
706 executed more than once in 2 seconds. If server receives
707 commands from client more frequently, timeout is registered
708 to process the commands. Affected file silcd/command.c.
709 Added new function silc_server_command_process_timeout.
711 * Changed NICK_NOTIFY handling in client library to check that
712 if the client's nickname was changed, so there is no need to
713 resolve anything from the server.
715 * Removed error printing from the WHOIS and IDENTIFY commands.
716 If error occurs then it is ignored silently in the client library.
717 The application, however, may map the received error to
718 human readable error string. The application currently maps
719 the NO_SUCH_NICKNAME error to string.
721 * Made the command status message public to the application. Moved
722 them from lib/silcclient/command_reply.c to
723 lib/silcclient/command_reply.h. The application can map the
724 received command status to the string with the
725 silc_client_command_status_message function.
727 * Added check to the server to check that client's ID is same
728 as the Source ID in the packet the client sent. They must
731 Tue Mar 13 12:49:21 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
733 * Added dist-bzip hook to the Makefile.am to make bzip2
734 compressed distributions.
736 Mon Mar 12 18:43:38 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
738 * Server now enforces the maximum length for the nickname and
739 the channel as protocol specification dictates. 128 bytes for
740 nickname and 256 bytes for channel name.
742 * Moved the WHOIS printing to the application. The client libary
743 does not print out the WHOIS information anymore, the application
744 must do it. Renamed silc_client_command_reply_whois_print to
745 the silc_client_command_reply_whois_save.
747 The client's idle time is also sent to the application now, and
748 the idle is shown on screen.
750 * Added silc_client_command_reply_identify_save to save the
751 received IDENTIFY entries.
753 * Do not check for channel private keys in message sending and
754 reception if the channel does not have the PRIVKEY mode set.
755 Affected file lib/silclient/client_channel.c.
757 Sun Mar 11 20:25:06 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
759 * Fixed a minor bug if WHOIS and IDENTIFY command parsing that
760 just surfaced after chaning the JOIN procedure.
762 Sun Mar 11 14:59:05 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
764 * Added silc_client_get_clients_by_list to get client entries
765 from Client ID list, that is returned for example by JOIN
766 and USERS command replies. The application should use this
767 function for example when JOIN command reply is received to
768 resolve the clients already on the channel (library does not
769 do that anymore as USERS command reply is not used in the JOIN
770 procedure anymore). Affected files lib/silcclient/silcapi.h and
771 lib/silcclient/idlist.c.
773 * JOIN command reply and USERS command reply returns now SilcBuffer
774 pointers instead of unsigned char pointers when returning
775 the client list and mode list.
777 * Added <Client ID> argument to the JOIN command reply, mainly
778 for the server to identify for which client the command was
779 originally sent. Updated protocol specs accordingly.
781 * Added SilcDlist private_key pointer to the SilcChannelEntry
782 in the client to support the channel private keys. Affected
783 file is lib/silcclient/idlist.h.
785 * Added SilcChannelPrivateKey argument to the function
786 silc_client_send_channel_message so that application can choose
787 to use specific private ke if it wants to. If it is not provided,
788 the normal channel key is used, unless private keys are set.
789 In this case the first (key that was added first) is used
790 as the encryption key.
792 * Implemented the support for channel private key handling.
793 Implemented the following functions:
795 silc_client_add_channel_private_key,
796 silc_client_del_channel_private_keys,
797 silc_client_del_channel_private_key,
798 silc_client_list_channel_private_keys and
799 silc_client_free_channel_private_keys
801 Affected file lib/silcclient/client_channel.c.
803 * Added the support for the private keys in the channel message
804 sending and encryption and in the message reception and
805 decryption. Affected funtions are
806 silc_client_send_channel_message and silc_client_channel_message.
808 Sat Mar 10 21:36:22 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
810 * Added SKE's key verify callback to the client library's
811 KE protocol context. Affected files lib/silcclient/protocol.[ch].
813 * Removed the statement that server (or router) must send USERS
814 command reply when joining to the channel so that the client
815 knows who are on the channel. Instead, the client list and
816 client's mode list is now sent in the JOIN command reply to the
817 client who joined channel. This is better solution.
819 * Added function silc_server_get_users_on_channel and function
820 silc_server_save_users_on_channel to the silcd/server.[ch].
822 * Removed function silc_server_command_send_users from the
825 * Do not show topic on the client library anymore. The topic is
826 sent in the command reply notify to the application and the
827 application must show the topic now.
829 Sat Mar 10 00:07:37 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
831 * Added client searching by nickname hash into the IDENTIFY and
832 WHOIS commands in the server as they were clearly missing from
833 them. Affected file is silcd/command.c.
835 * Fixed a bug in private message receiving in the client library.
836 The remote ID was freed and it wasn't supposed, now it is
839 Fri Mar 9 12:40:42 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
841 * Minor fix to the channel payload; allocate the data area, as it
842 needs to be of specific length.
844 * If the key agreement port is zero then the operating
845 system will define the bound port. Affected files are
846 lib/silcclient/silcapi.h and lib/silcclient/client_keyagr.c.
848 * Added new function silc_channel_payload_decrypt into the file
849 lib/silccore/silcchannel.[ch].
851 * Moved the channel message etc, check from silc_packet_decrypt
852 to applications. The library calls now a generic
853 SilcPacketCheckDecrypt callback which is to return TRUE or FALSE
854 when the packet is either normal or special. This was done to
855 allow more wide range of checking that was not allowed when
856 the code was in library. Now applications can do virtually any
857 checks to the packet and return to the library the decision how
858 the packet should be processed. Affected files are
859 lib/silccore/silcpacket.[ch].
861 Added silc_server_packet_decrypt_check to the server and
862 silc_client_packet_decrypt_check to the client library.
864 * Added silc_server_packet_send_srcdest into silcd/packet_send.[ch]
865 to send with specified source and destination information.
867 * Channel message delivery between routers was broken after the
868 channel key distribution was fixed earlier. The channel key
869 was used be to distributed to other routers as well which is not
870 allowed by the protocol. Now this is fixed and channel keys
871 really are cell specific and the channel message delivery between
872 routers comply with the protocol specification.
874 * Fixed various commands in server to check also the global list
875 for the channel entry and not just the local list. The affected
876 file silcd/command.c.
878 Thu Mar 8 21:39:03 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
880 * Added assert()s to buffer formatting and unformatting routines
881 to assert (if --enable-debug) when error occurs. Affected
882 file: lib/silcutil/silcbuffmt.c.
884 * Changed to auto-reconnect to check whether the remote host is
885 router and register the re-connect timeout if it is. It used
886 to check that whether we are normal server, but router must do
887 auto-reconnect with another router as well. Affected file
890 * Removed the [<key len>] option from CMODE command as the cipher
891 name decides the key length, nowadays. See the defined ciphers
892 from the protocol specification.
894 * Added [<hmac>] option to the CMODE command to define the HMAC
895 for the channel. Added SILC_CMODE_HMAC channel mode.
897 * Added [<hmac>] option for the JOIN command so that user can
898 select which HMAC is used to compute the MACs of the channel
901 * Added Hmac field to the Channel Message Payload. The integrity
902 of plaintext channel messages are now protected by computing
903 MAC of the message and attaching the MAC to the payload. The
904 MAC is encrypted. Now, it is clear that this causes some
905 overhead to the size of the packet but rationale for this is that
906 now the receiver can verify whether the channel message decrypted
907 correctly and also when private keys are set for the channel the
908 receiver can decrypt the packet with several keys and check from
909 the MAC which key decrypted the message correctly.
911 * Added silc_cipher_encrypt and silc_cipher_decrypt into the
912 lib/silccrypt/silccipher.[ch].
914 * Added silc_hash_len to return the digest length into the
915 lib/silcrypt/silchash.[ch].
917 * Rewrote parts of Silc Channel Payload interface in the
918 lib/silccore/silcchannel.[ch]. The encode function now also
919 encrypts the packet and parse function decrypts it.
921 Wed Mar 7 20:58:50 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
923 * Fixed a minor formatting bug in the SKE's key material processing.
924 It actually might have processed the keys wrong way resulting
927 * Redefined the mandatory HMAC algorithms and added new algorithms.
928 Added hmac-sha1-96 and hmac-md5-96 which are normal hmac-sha1
929 and hmac-md5 truncated to 96 bits. The mandatory is now
930 hmac-sha1-96. Rest are optional (including the one that used
931 to be mandatory). Rationale for this is that the truncated HMAC
932 length is sufficient from security point of view and can actually
933 make the attack against the HMAC harder. Also, the truncated
934 HMAC causes less overhead to the packets. See the RFC2104 for
937 * Added new [hmac] configuration section. The SKE used to use
938 the hash names (md5 and sha1) in the SKE proposal as HMCAS which
939 is of course wrong. The official names that must be proposed in
940 the SKE are the ones defined in the protocol specification
941 (hmac-sha1-96 for example). The user can configure any hmac
942 using any hash function configured in the [hash] section. At
943 least, the mandatory must be configured.
945 Rewrote the HMAC interface in lib/silccrypt/silchmac.[ch].
947 * Added HMAC list to the SKE proposal list. It has now both
948 hash algorithm list and HMAC list. This makes the protocol
949 incompatible with previous versions. The SKE now seems to work
950 the way it is supposed to work, for the first time actually.
952 * Defined plain Hash algorithms to the protocol specification.
955 Tue Mar 6 15:36:11 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
957 * Implemented support for key agreement packets into the server.
958 Added functions silc_server_key_agreement and
959 silc_server_send_key_agreement. Other than these functions,
960 server has nothing to do with this packet.
962 * Added support for private message key packets into the server.
963 Added functions silc_server_private_message_key and
964 silc_server_send_private_message_key.
968 * Changed the silc_[client|server]_protocol_ke_set_keys to be
969 called in the protocol's final callback instead in the END
970 protocol state. This makes a little more sense and in the same
971 time in client we can use the same protocol routines for normal
972 key exchange and to key agreement packet handling as well.
974 * Added to both client's and server's KE protocol context the
975 SilcSKEKeyMaterial pointer to save the key material. We will
976 bring the key material to the protocol's final callback by doing
977 this. The final callback must free the key material.
979 * Added SKE's packet_send callback into client's KE protocol
980 context so that the caller can choose what packet sending function
981 is used. This way we can use different packet sending when
982 doing normal SKE when doing key agreement packet handling (in
983 the key agreement packet handling we do not want to encrypt
986 * Implemented the responder side of the key agreement routines
987 in the client. The client can now bind to specified port and
988 accept incoming key negotiation. The key material is passed
989 to the application after the protocol is over.
991 * Implemented the processing of incoming Key Agreement packet
992 in the client. Added function silc_client_key_agreement to
995 * Implemented the intiator side of the key agreement routines
996 in the client. The client can now initiate key agreement with
997 another remote client. The key material is passed to the
998 application after the protocol is over.
1000 * Created client_keyagr.c to include all the key agreement
1003 * Added macro SILC_TASK_CALLBACK_GLOBAL which is equal to the
1004 SILC_TASK_CALLBACK except that it is not static.
1006 * Created client_notify.c and moved the Notify packet handling
1007 from the client.[ch] into that file.
1009 * Created client_prvmsg.c and moved all private message and
1010 private message key routines from the client.[ch] into that file.
1012 * Create client_channel.c and moved all channel message and
1013 channel private key routines from the client.[ch] into that file.
1015 * Changed silc_client_get_client_by_id_resolve to resolve with
1016 WHOIS command instead of IDENTIFY command, in the file
1017 lib/silclient/idlist.c.
1019 Mon Mar 5 18:39:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1021 * Implemented the SKE's responder side to the Client library.
1023 * When FAILURE is received to the protocol do not trust it
1024 blindly. Register a timeout to wait whether the remote closes
1025 the connection as it should do it, only after that process the
1026 actual failure. This was changed to both client and server.
1028 * Added client_internal.h to include some of the structures
1029 there instead of client.h in lib/silcclient/.
1031 * Added function silc_task_unregister_by_callback to unregister
1032 timeouts by the callback function.
1034 Sat Mar 3 19:15:43 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1036 * Some "Incomplete WHOIS info" errors has been appearing on the
1037 log files. Took away the entry->userinfo check from WHOIS
1038 reply sending. The entry->userinfo is now " " if client did not
1039 provide one. I thought this was fixed earlier but something
1040 is wrong still. Let's see if the error still appears.
1042 Wed Feb 28 20:56:29 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1044 * Fixed a minor bug in the login when the channel key is
1045 re-generated in the server. It used to generate the key in
1046 wrong order and thus caused problems in the channel traffic.
1048 * Fixed a minor bug in channel key distsribution after
1049 KICK command. The key was not sent to the router even though
1052 Tue Feb 27 20:24:25 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1054 * Added silc_ske_process_key_material_data as generic routine
1055 to process any key material as the SILC protocol dictates. The
1056 function is used by the actual SKE library but can be used by
1057 applications as well. This relates to the private message keys
1058 and the channel private keys since they must be processed the
1059 same way the normal SILC session keys. The protocol dictates
1060 this. Affected files: lib/silcske/silcske.[ch].
1062 Added also silc_ske_free_key_material to free the
1063 SilcSKEKeyMaterial structure.
1065 * Defined silc_cipher_set_key function to set the key for
1066 cipher without using the object's method function. The affected
1067 files: lib/silccrypt/silccipher.[ch].
1069 * Implemented silc silc_client_add_private_message_key,
1070 silc_client_add_private_message_key_ske,
1071 silc_client_del_private_message_key,
1072 silc_client_list_private_message_keys and
1073 silc_client_free_private_message_keys functions in the
1076 Added functions silc_client_send_private_message_key to send
1077 the Private Message Key payload and silc_client_private_message_key
1078 to handle incoming Private Message Key payload.
1080 * Added Cipher field to the Private Message Key payload to set
1081 the cipher to be used. If ignored, the default cipher defined
1082 in the SILC protocol (aes-256-cbc) is used.
1084 Tue Feb 27 13:30:52 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1086 * Removed lib/silcclient/ops.h file.
1088 Redefined parts of the SILC Client Library API. Created new
1089 file silcapi.h that deprecates the ops.h file and defines the
1090 published Client Library API. Defined also private message key
1091 API and channel private key API into the file.
1093 This is the file that the application must include from the
1094 SILC Client Library. Other files need not be included by
1095 the application anymore.
1097 * Added new key_agreement client operation callback and also
1098 defined the Key Agreement library API for the application.
1100 Tue Feb 27 11:28:31 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1102 * Added new packet type: SILC_PACKET_KEY_AGREEMENT. This packet
1103 is used by clients to request key negotiation between another
1104 client in the SILC network. If the negotiation is started it
1105 is performed using the SKE protocol. The result of the
1106 negotiation, the secret key material, can be used for example
1107 as private message key.
1109 Implemented the Key Agreement payload into the files
1110 lib/silccore/silauth.[ch].
1112 Mon Feb 26 12:13:58 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1114 * Redefined ciphers for the SILC protocol. Added some new ciphers
1115 and defined the key lengths for the algorithms. Changed the
1116 code accordingly. The default key length is now 256 bits.
1118 * Fixed SKE key distribution function silc_ske_process_key_material
1119 when the key length is more than 128 bits. The default key
1120 length in SILC is now 256 bits.
1122 * Added new command status type: SILC_STATUS_ERR_UNKOWN_ALGORITHM
1123 to indicate unsupported algorithm.
1125 * Renamed rijndael.c to aes.c and all functions as well.
1127 * Fixed a long standing channel key setting bug in client library.
1128 Weird that it has never surfaced before.
1130 * Fixed bug in channel deletion. If the entire channel is removed
1131 then it must also delete the references of the channel entry
1132 from the client's channel list as the client's channel entry and
1133 the channel's client entry share same memory.
1135 Sun Feb 25 20:47:29 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1137 * Implemented CONNECT and SHUTDOWN commands in the client.
1139 * Implemented CLOSE command to the client.
1141 * Added the function silc_idlist_find_server_by_name into the
1142 files silcd/idlist.[ch].
1144 Added the function silc_idlist_find_server_by_conn into the
1145 files silcd/idlist.[ch].
1147 Sat Feb 24 23:45:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1149 * DIE command was renamed to SHUTDOWN. Updated the both code
1152 * Defined SILC_UMODE_NONE, SILC_UMODE_SERVER_OPERATOR and
1153 SILC_UMODE_ROUTER_OPERATOR modes into lib/silccore/silcmode.h.
1155 * Implemented CONNECT, CLOSE and SHUTDOWN commands to the server
1158 * Added function silc_server_create_connection function to create
1159 connection to remote router. My server implementation actually
1160 does not allow router to connect to normal server (it expects
1161 that normal server always initiates the connection to the router)
1162 so the CONNECT command is only good for connecting to another
1165 Sat Feb 24 16:03:45 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1167 * Added SILC_NOTIFY_TYPE_KICKED to indicate that the client
1168 or some other client was kicked from the channel.
1170 Implemented the handling of the notify type to both client
1173 Implemented silc_server_send_notify_kicked to send the KICKED
1174 notify. It is used to send it to the server's primary router.
1176 * Implemented the KICK command into server and client.
1178 * Added `query' argument to the silc_idlist_get_client function
1179 to indicate whether to query the client from server or not if
1182 * Added new command status type SILC_STATUS_ERR_NO_CHANNEL_FOPRIV
1183 to indicate that the client is not channel founder.
1187 Sat Feb 24 00:00:55 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1189 * Removed the rng context from SilcPacketContext structure and
1190 changed that the packet routine uses the Global RNG API.
1192 Fri Feb 23 11:22:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1194 * Added support for quit message that client can "leave" on the
1195 channel when it quits the SILC. It is ditributed inside the
1196 SILC_NOTIFY_TYPE_SIGNOFF notify type.
1198 Added silc_server_free_client_data that will take the
1199 signoff message as argument.
1201 * Changed SKE routines to use the silc_pkcs_sign/verify routines.
1203 Thu Feb 22 23:05:36 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1205 * Updated parts of the protocol specification to keep it up
1208 Thu Feb 22 15:08:20 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1210 * Added List flag (SILC_PACKET_FLAG_LIST) to indicate list of
1211 payloads in one packet.
1213 * Deprecated following packet types: NEW_ID_LIST, NEW_CHANNEL_LIST,
1214 NEW_CHANNEL_USER_LIST, SET_MODE and SET_MODE_LIST. List packets
1215 use now the new List flag.
1217 * Also deprecated the following packet types: REPLACE_ID,
1218 NEW_CHANNEL_USER and REMOVE_CHANNEL_USER packet types.
1220 * Added list support for Notify packet in server.
1222 * Added silc_server_send_notify_channel_change to send the
1223 CHANNEL_CHANGE notify type to replace channel ID's. Deprecates
1224 the silc_server_send_replace_id.
1226 * Added silc_server_send_notify_nick_change to send the
1227 NICK_CHANGE notify type. Deprecates the function
1228 silc_server_send_replace_id.
1230 * Added silc_server_send_notify_join to send the JOIN notify type.
1231 Deprecates the function silc_server_send_new_channel_user.
1233 * Added silc_server_send_notify_leave to send LEAVE notify type.
1234 Deprecates the function silc_server_send_remove_channel_user.
1236 * Added silc_server_send_notify_cmode and
1237 silc_server_send_notify_cumode to send CMODE and CUMODE notify
1238 types. Deprecates the silc_server_send_set_mode function.
1240 * Added SERVER_SIGNOFF notify type to indicate that server has
1241 quit. This means that all clients on the channel from that
1242 server will drop. This can be also used when netsplit happens.
1244 Deprecated REMOVE_ID packet type since it is not needed anymore
1247 Added silc_server_send_notify_server_signoff to send the
1248 SERVER_SIGNOFF notify type. Deprecates the function
1249 silc_server_send_remove_id.
1251 Added also silc_server_send_notify_signoff to send the
1252 SIGNOFF notify type.
1254 * Employed the PKCS #1. It is the mandatory way to do RSA in the
1255 SILC protocol from this day on. Changed the protocol
1256 specification as well.
1258 * Added silc_server_send_notify_topic_set to send TOPIC_SET
1259 notify type. It is used between routers to notify about
1260 topic changes on a channel.
1262 * Added silc_id_dup into lib/silccore/id.[ch] to duplicate
1265 * Partly updated the protocol specification to comply with the
1266 changes now made. It is still though a bit outdated.
1268 * The JOIN notify type now takes one extra argument <Channel ID>.
1269 The packet used to be destined to the channel but now the
1270 JOIN type may be sent as list thus it is impossible to
1271 destine it to any specific channel. By adding this argument
1272 it is again possible.
1274 Wed Feb 21 22:39:30 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1276 * Added CREDITS file. The CHANGES and CREDITS file will appear
1277 in the distribution as well.
1279 Wed Feb 21 14:17:04 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1281 * Implemented CMODE_CHANGE, CUMODE_CHANGE and TOPIC_SET notify
1282 types in the server's silcd/packet_receive.c.
1284 * Implemented CMODE and CUMODE to work in router environment.
1286 * Fixed minor encoding and decoding buglet from the
1287 lib/silccore/silcmode.c.
1289 * Fixed buffer overflow from lib/silcclient/command.c in USERS
1292 Wed Feb 21 12:44:00 EET 2001 Mika Boström <bostik@lut.fi>
1294 * Changed all SilcConfigServer* and silc_config_server* to
1295 SilcServerConfig* and silc_server_config*, respectively.
1298 Wed Feb 21 00:10:00 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1300 * Associated the ID (client or server ID) to the Authentication
1301 Payload to avoid any possibility of forging. Updated the
1302 protocol specification and the code accordingly.
1304 Tue Feb 20 14:14:14 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1306 * The RSA key length is now save to the RsaKey context in the
1307 key generation process in lib/silccrypt/rsa.c. The key length
1308 is now used to figure out the maximum size of the block allowed
1309 to be encrypted/signed.
1311 * Added silc_mp_mp2bin_noalloc into lib/silcmath/mpbin.[ch]. It
1312 is equivalent to the silc_mp_mp2bin but does not allocate any
1315 * Changed silc_mp_mp2bin API to take length argument. If it is
1316 non-zero then the buffer is allocated that large. If zero, then
1317 the size is approximated using silc_mp_sizeinbase, which however
1320 * Created Global RNG API which is global RNG that application can
1321 initialize. After initializing, any routine anywhere in the
1322 code (including library) can use RNG without allocating a new
1323 RNG object. This was done to allow this sort of use of the
1324 RNG in code that has no chance to allocate RNG object. All
1325 applications currently allocate this and many routines in the
1326 library use this. Affected file lib/silccrypt/silcrng.[ch].
1328 * Removed the RNG kludge from lib/silcmath/primegen.c and changed
1329 it to use the Global RNG API.
1331 * Defined Authentication Payload into protocol specification that
1332 is used during SILC session to authenticate entities. It is
1333 used for example by client to authenticate itself to the server
1334 to obtain server operator privileges.
1336 Implemented this payload into the lib/silccore/silcauth.[ch].
1337 Implemented also routines for public key based authentication
1338 as the new protocol specification dictates.
1340 Moved definitions of different authentication methods from
1341 lib/silccore/silcprotocol.h into lib/silccore/silcauth.h.
1343 * Added silc_pkcs_encrypt, silc_pkcs_decrypt, silc_pkcs_sign,
1344 silc_pkcs_verify and silc_pkcs_sign_with_hash and
1345 silc_pkcs_verify_with_hash functions into the file
1346 lib/silccrypt/silcpkcs.[ch].
1348 Mon Feb 19 19:59:28 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1350 * The client entry's userinfo pointer must be always valid.
1351 Otherwise the [<unknown>] bug will surface beacuse the WHOIS
1352 will fail since it requires the userinfo. Now, the userinfo
1353 is allocated as "" if actual userinfo does not exist. Actually,
1354 it must exist and it is totally Ok to drop client connections
1355 that does not announce the userinfo. However, we will make
1356 this workaround for now.
1358 * Added silc_net_get_remote_port into lib/silcutil/silcnet.[ch]
1359 to return the remote port by socket.
1361 Mon Feb 19 14:26:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1363 * Changed SILC_SERVER_COMMAND_EXEC_PENDING macro to the name
1364 SILC_SERVER_PENDING_EXEC and added an new macro
1365 SILC_SERVER_PENDING_DESTRUCTOR which is called to free the
1366 data or when error occurs while processing the pending command.
1368 Added new argument `destructor' into silc_server_command_pending
1369 and to the SilcServerCommandPending object. This destructor is
1370 now called after calling the pending callback or if error occurs
1371 immediately. If error occurs the actual pending callback won't
1372 be called at all - only the destructor. The destructor may be
1373 NULL if destructor is not needed.
1375 All this applies for client library code as well. Similar
1376 changes were made there as well for the pending commands.
1378 In the client, the application must now allocate the
1379 SilcClientCommandContext with the silc_client_command_alloc
1382 * Added reference counter to the SilcServerCommandContext. Added
1383 function silc_server_command_alloc and silc_server_command_dup
1386 Same type of functions added to the client library for the same
1389 * Removed the cmd_ident from IDListData away since it is now
1390 global for all connections. It is the command identifier used
1391 in command sending and with pending commands. The affected file
1394 * Added reference counter to the SilcSocketConnection objecet to
1395 indicate the usage count of the object. The object won't be
1396 freed untill the reference counter hits zero. Currently only
1397 server uses this, and client ignores it. The client must be
1398 set to use this too later. The affected files are
1399 lib/silccore/silcsockconn.[ch]. Added also the function
1400 silc_socket_dup to increase the reference counter.
1402 This was mainly added because it is possible that the socket
1403 is removed underneath of pending command or other async
1404 operation. Now it won't be free'd and proper DISCONNECTING
1405 flags, etc. can be set to avoid sending data to connection that
1406 is not valid anymore.
1408 * Added SILC_SET_DISCONNECTING to server.c when EOF is read from
1409 the connection. After that it sets SILC_SET_DISCONNECTED.
1410 It is, however, possible that the socket data is not still freed.
1411 The silc_server_packet_process now checks that data is not
1412 read or written to connection that is DISCONNECTED. The socket
1413 get's freed when the reference counter hits zero.
1415 Mon Feb 19 00:50:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1417 * Changed the client operation API: channel_message operation's
1418 `sender' is now the client entry of the sender, not the nickname
1419 and the `channel' is the channel entry, not the channel name.
1421 In the private_message operation the `sender' is now also the
1422 client entry of the sender not the nickname.
1424 Affected file is lib/silcclient/ops.h and all applications
1425 using the client operations.
1427 Sat Feb 17 22:11:50 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1429 * Moved the calling of ops->connect() from connect_to_server_final
1430 into receive_new_id functin since that is the point when the
1431 client is actually allowed to send traffic to network. The
1432 affected file is lib/silcclient/client.c.
1434 Sat Feb 17 13:15:35 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1436 * When receiving NEW_CHANNEL_LIST, NEW_CHANNEL_USER_LIST,
1437 NEW_ID_LIST and SET_MODE_LIST packets, broadcast the list packet
1438 (if needs broadcasting) instead of broadcasting the packets one
1439 by one which would make a burst in the network traffic.
1441 * Added `broadcast' argument to the functions in silcd/server.[ch]
1442 silc_server_create_new_channel[_with_id] to indicate whether
1443 to send New Channel packet to primary router.
1445 Sat Feb 17 01:06:44 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1447 * Added new function into the silcd/server.[ch] files:
1448 silc_server_create_new_channel_with_id to create new channel with
1449 already existing Channel ID.
1451 * Added new packet type SILC_PACKET_SET_MODE_LIST into the file
1452 lib/silccore/silcpacket.h. This packet is used t send list of
1453 Set Mode payloads inside one packet. Server uses this to set
1454 the modes for the channels and clients on those channels, that it
1455 announced to the router when it connected to it. The protocol
1456 specification has been updated accordingly.
1458 * The silc_server_new_channel did not handle the packet coming
1459 from normal server as it normally does not send that. However,
1460 when it announces its channels it does send it. Implemented
1461 the support for that.
1463 * Added SILC_ID_CHANNEL_COMPARE macro to compare to Channel ID's
1464 into the file lib/silccore/id.h.
1466 Fri Feb 16 23:57:29 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1468 * Fixed memory leaks in the functions silc_idlist_del_client,
1469 silc_idlist_del_channel and silc_idlist_del_server in the file
1470 silcd/idlist.c. All of those leaked like a sieve.
1472 * Fixed some small memory leaks in the client's function
1473 silc_client_notify_by_server.
1475 * Added functions into silcd/server.c: silc_server_announce_clients,
1476 silc_server_announce_channels and silc_server_announce_server.
1477 These functions are used by normal and router server to announce
1478 to its primary router about clients, channels and servers (when
1479 router) that we own. This is done after we've connected to the
1482 These functions effectively implements the following packet types:
1483 SILC_PACKET_NEW_CHANNEL_LIST, SILC_PACKET_NEW_CHANNEL_USER_LIST
1484 and SILC_PACKET_NEW_ID_LIST.
1486 * Added new functions into the silcd/packet_receive.[ch]:
1487 silc_server_new_id_list, silc_server_new_channel_list and
1488 silc_server_new_channel_user_list to handle the incoming
1489 NEW_ID_LIST, NEW_CHANNEL_LIST and NEW_CHANNEL_USER_LIST packets.
1491 * Added support of changing Channel ID in the function
1492 silc_server_replace_id. If the server that announces a channel
1493 to the router already exists in the router (with same name but
1494 with different Channel ID), router is responsible to send
1495 Replace ID packet to the server and force the server to change
1496 the Channel ID to the one router has.
1498 * Added new notify type SILC_NOTIFY_TYPE_CHANNEL_CHANGE to notify
1499 client that the Channel ID has been changed by the router. The
1500 normal server sends this to the client. Client must start using
1501 the new Channel ID as the channel's ID.
1503 Implemented handling of this new type into lib/silcclient/client.c
1504 into the function silc_client_notify_by_server.
1506 * Added new function silc_idlist_replace_channel_id into the files
1507 silcd/idlist.[ch] to replace the Channel ID.
1509 Fri Feb 16 14:14:00 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1511 * Call silc_server_command_identify_check always when processing
1512 the IDENTIFY command in silcd/command.c
1514 Thu Feb 15 20:07:37 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1516 * Added new packet type SILC_PACKET_HEARTBEAT that is used to
1517 send keepalive packets. The packet can be sent by clients,
1518 servers and routers.
1520 Added function silc_socket_set_heartbeat into the file
1521 lib/silccore/silcsockconn.[ch] to set the heartbeat timeout.
1522 If not set, the heartbeat is not performed. The actual
1523 heartbeat is implemented in the low level socket connection
1524 library. However, application is responsible of actually
1527 Added silc_server_send_heartbeat to send the actual heartbeat
1528 packet into silcd/packet_send.[ch]. Server now performs
1529 keepalive with all connections.
1531 * Added silc_task_get_first function into lib/silcutil/silctask.c
1532 to return the timeout task with shortest timeout. There was a bug
1533 in task unregistration that caused problems. TODO has been
1534 updated to include that task system must be rewritten.
1536 * The client library will now resolve the client information when
1537 receiving JOIN notify from server for client that we know but
1538 have incomplete information.
1540 * Rewrote parts of silc_server_remove_from_channels and
1541 silc_server_remove_from_one_channel as they did not remove the
1542 channel in some circumstances even though they should've.
1544 * Encryption problem encountered in server:
1546 The LEAVE command used to send the Channel Key packet to the
1547 router immediately after generating it. However, the code
1548 had earlier sent Remove Channel user packet but not immediately,
1549 ie. it was put to queue. The order of packets in the router
1550 was that Channel Key packet was first and Remove Channel User
1551 packet was second, even though they were encrypted in the
1552 reverse order. For this reason, MAC check failed. Now, this
1553 is fixed by not sending the Channel Key packet immediately but
1554 putting it to queue. However, this is more fundamental problem:
1555 packets that are in queue should actually not be encrypted
1556 because packets that are sent immediately gets encrypted
1557 actually with wrong IV (and thus MAC check fails). So, packets
1558 that are in queue should be encrypted when they are sent to
1559 the wire and not when they put to the queue.
1561 However, the problem is that the current system has not been
1562 designed to work that way. Instead, the packet is encrypted
1563 as soon as possible and left to the queue. The queue is then
1564 just purged into wire. There won't be any fixes for this
1565 any time soon. So, the current semantic for packet sending
1568 o If you send packet to remote host and do not force the send
1569 (the packet will be in queue) then all subsequent packets to the
1570 same remote host must also be put to the queue. Only after the
1571 queue has been purged is it safe again to force the packet
1574 o If you send all packets immediately then it safe to send
1575 any of subsequent packets through the queue, however, after
1576 the first packet is put to queue then any subsequent packets
1577 must also be put to the queue.
1579 Follow these rules and everything works fine.
1581 Thu Feb 15 14:24:32 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1583 * Added new function silc_server_remove_clients_by_server to
1584 remove all client entries from ID list when the server connection
1585 is lost. In this case it is also important to invalidate all
1586 client entires as they hold the invalid server entry. This
1587 fixes fatal bug when server has lost connection and will reconnect
1590 Wed Feb 14 16:03:25 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1592 * Made some sanity checks to silc_server_daemonise like to check
1593 whether the requested user and group actually exists.
1595 * Added sanity check to SKE's silc_ske_responder_finish to check
1596 that the public and private key actually is valid.
1598 * Invalidate the client's nickname when receiving Replace ID
1599 packet and the Client ID is being replaced. This means that the
1600 server will query the nickname if someone needs it (client)
1603 * Sort the ID Cache in client library when the ID Cache data
1604 has changed (needs sorting).
1606 * Do not allow for SILC client to create several connections to
1607 several servers. The client does not support windows right now
1608 and generating multiple connections causes weird behaviour.
1610 Irssi-silc client does support windows and can handle several
1611 connections without problems, see: www.irssi.org and SILC plugin.
1613 * Fixed some places where client was added to the IDList. The
1614 rule of thumb is following (in order to get everything right):
1615 If the client is directly connected local client then the
1616 `connection' argument must be set and `router' argument must be
1617 NULL to silc_idlist_add_client function. If the client is not
1618 directly connected client then the `router' argument must
1619 bet set and the `connection' argument must be NULL to the
1620 silc_idlist_add_client function.
1622 * The funtion silc_server_packet_send_local_channel actually did
1623 not check whether the client was locally connected or not. It
1624 does that now. Fixed a bug related to LEAVE command.
1626 * Fixed Remove Channel User payload parsing bug in server's
1627 silcd/packet_receive.c. Fixed a bug related to LEAVE command.
1629 * The server's silc_server_save_channel_key now checks also the
1630 global ID list for the channel as it might not be in the local
1631 list. Fixed a bug related to LEAVE command.
1633 * Is this the end of the [<unknown>] buglet that has been lurking
1634 around for a long time? A little for loop fix in server's
1635 silc_server_command_whois_parse that is used by both IDENTIFY
1636 and WHOIS command. At least, this was a clear bug and a cause
1637 of one type of [<unknown>] buglet.
1639 * WHOIS and IDENTIFY commands call the function
1640 silc_server_command_[whois/identify]_check function even if
1641 we are not router server.
1643 Tue Feb 13 19:55:59 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1645 * Added --with-gmp configuration option. If set the GMP
1646 is always compiled in the SILC source tree. If not set then
1647 it is checked whether the system has the GMP3 installed. If
1648 it has then the GMP won't be compiled (the system's headers
1649 and library is used), if it doesn't have it then the GMP is
1650 compiled in the SILC source tree.
1652 Mon Feb 12 11:20:32 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1654 * Changed RSA private exponent generation to what PKCS #1
1655 suggests. We try to find the smallest possible d by doing
1656 modinv(e, lcm(phi)) instead of modinv(e, phi). Note: this is
1657 not security fix but optimization.
1659 Sun Feb 11 18:19:51 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1661 * Added new config entry [Identity] to fork the server and run
1662 it as specific user and group. A patch from Bostik.
1664 * Imported Dotconf configuration library into lib/dotconf.
1665 This will be used to create the SILC configuration files later.
1666 It will appear in the distsribution after this commit.
1668 Sat Feb 10 21:13:45 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1670 * A big code auditing weekend happening. Auditing code for
1671 obvious mistakes, bugs and errors. Also, removing any code
1674 Removed files for being obsolete:
1676 o lib/silcutil/silcbuffer.c (the buffer interface is entirely in
1677 inline in the file lib/silcutil/silcbuffer.h)
1679 o lib/silcutil/silcbufutil.c (the header has inline versions)
1681 Changed code to fix possible error conditions:
1683 o The buffer formatting routines now check that the destination
1684 buffer really has enough space to add the data. This applies for
1685 both buffer formatting and unformatting
1686 (lib/silcutil/silcbuffmt.[ch]). Also, the entire buffer
1687 unformatting was changed to accomodate following rules:
1688 XXX_*STRING_ALLOC will allocate space for the data into the pointer
1689 sent to the function while XXX_*STRING will not allocate or copy
1690 the data into the buffer. Instead it sets the pointer from the
1691 buffer into the pointer sent as argument (XXX_*STRING used to
1692 require that the pointer must be allocated already). This change
1693 makes this whole thing a bit more consistent and more optimized
1694 (note that the data returned in the unformatting with XXX_*STRING
1695 must not be freed now). The routines return now -1 on error.
1697 o Tried to find all code that use buffer_format and buffer_unformat
1698 and added return value checking to prevent formatting and
1699 especially unformatting errors and possible subsequent fatal
1702 o Changed ske->x and ske->KEY to mallocated pointers in
1703 lib/silcske/silcske.h. Fixed possible data and memory leak.
1705 o Added return value checking to all *_parse* functions. Fixed
1706 many memory leaks as well.
1708 o Added length argument to silc_id_str2id in lib/silccore/id.[ch]
1709 so that buffer overflows would not happen. All code now also
1710 checks the return value as it can fail.
1712 Mon Feb 5 20:08:30 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1714 * Added reconnection support to server if the normal server looses
1715 its connection to the router (for example if router is rebooted).
1716 The server performs normal reconnection strategy implemented
1717 to the server. Affected file silcd/server.c.
1719 Sun Feb 4 13:18:32 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1721 * Added new packet type SILC_PACKET_SET_MODE that is used to
1722 distribute the information about changed modes (for clients,
1723 channels and clients channel modes) to all routers in the
1724 network. Updated the protocol specification accordingly.
1726 Added functions into silcd/packet_send.c and
1727 silcd/packet_receive.c: silc_server_send_set_mode,
1728 silc_server_set_mode.
1730 Added new files silcmode.[ch] into lib/silccore that implements
1731 the encoding and decoding of Set Mode Payload. Added new type
1732 SilcSetModePayload. Moved the definitions of different modes
1733 from lib/silccore/silcchannel.h into lib/silccore/silcmode.h.
1735 Sat Feb 3 15:44:54 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1737 * Oops, a little mistake in server's connection authentication
1738 protocol. The protocol is not ended with FAILURE but with
1739 SUCCESS if the authentication is Ok. :) Affected file is
1742 * Implemented NICK_CHANGE notify handling in server in the file
1743 silcd/packet_receive.c The NICK_CHANGE notify is distributed to
1744 the local clients on the channel. After the changing nickname
1745 in router environment snhould work and the [<unknown>] nickname
1746 should appear no more.
1748 The silc_server_replace_id function that receives the Replace ID
1749 payload now sends the NICK_CHANGE notify type also in the file
1750 silcd/packet_receive.c
1752 * Changed WHOIS and IDENTIFY command to support the maximum amount
1753 of arguments defined in protocol specs (3328 arguments). This
1754 fixed a bug that caused problems when there were more than three
1757 Fri Feb 2 11:42:56 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1759 * Added extra parameter, command identifier, to the
1760 silc_client_send_command so that explicit command identifier
1763 Changed that ID list routines uses specific command identifier
1764 when sending WHOIS/IDENTIFY requests to the server so that they
1765 can be identified when the reply comes back.
1767 Affected files lib/silcclient/command.[ch],
1768 lib/silcclient/client.c and lib/silcclient/idlist.[ch].
1770 * Added `sender' argument to silc_server_packet_send_to_channel
1771 to indicaet the sender who originally sent the packet to us
1772 that we are now re-sending. Ignored if NULL. Affected file
1773 silcd/packet_send.[ch].
1775 * Added some server statistics support in silcd/server_internal.h
1776 SilcServerStatistics structure and around the server code. Also
1777 send some nice statistics information when client is connecting
1780 Thu Feb 1 23:31:21 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1782 * Fixed channel ID decoding in server's JOIN command reply in
1783 silcd/command_reply.c
1785 * Fixed braodcasting of replace ID payload to not to send it if
1786 we are standalone server in silcd/packet_receive.c.
1788 * Fixed all channel message sending routines to not to send
1789 packets to clients that has router set, since they are routed
1790 separately in the same function earlier. Affects file
1791 silcd/packet_send.c and all channel packet sending functions.
1793 * In USERS reply, res_argv[i] are not allocated, the table
1794 is allocated. Thus changed that free the table, not its
1797 * In server's whois_check and identify_check if the client is
1798 locally connected do not send any WHOIS commands - they are not
1801 Thu Feb 1 21:32:27 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1803 * Fixed some minor bugs in client when sending WHOIS command. The
1804 arguments was in wrong order.
1806 * Removed statis function add_to_channel from server in
1807 silcd/command.c that was previously used with the joining but
1810 * Tested USERS command in router environment successfully with two
1811 routers, two servers and two clients.
1813 Thu Feb 1 00:54:26 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1815 * Reorganized the USERS command and command reply in client library
1816 in lib/silcclient/command.c and lib/silcclient/command_reply.c.
1817 When the command is given by user we register a pending command
1818 callback that will reprocess the command after the reply has been
1819 received from the server. When reprocessing the packet we then
1820 display the information. Thus, the USERS information is displayed
1821 now in the command callback instead of in the command reply
1822 callback. The processing of the command is same as previously
1823 when server has sent the command reply in the JOINing process.
1825 * Added to USERS command in silcd/command_reply.c to join the client,
1826 we didn't use to know about, to the channel after we've created
1827 a client entry for it. Also, for clienet we did know already still
1828 check whether it is on the channel or not and add it if not.
1830 * Removed silc_server_command_join_notify as the function and its
1833 Tue Jan 30 22:39:15 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1835 * Changed the client's pending command handling to the same as the
1836 server's pending command handling. It is also now possible to
1837 execute command reply functions from other command reply
1838 function as the function callbacks for commands and command
1839 replies are one and same. The pending commands are not static
1840 list anymore, it is mallocated SilcDList in lib/silcclient/client.h
1841 in client connection context. Thus, pending commands are server
1842 connection specific as it is convenient.
1844 Changed the function silc_client_command_pending and
1845 silc_client_command_pending_del and added new function
1846 silc_client_command_pending_check. Removed the
1847 SILC_CLIENT_CMD_REPLY_EXEC, and SILC_CLIENT_PENDING_COMMAND_CHECK
1850 * Added cmd_ident, current command identifier, to the client
1851 connection context in lib/silcclient/client.h to keep track on
1852 command identifiers used in command sending. Client's command reply
1853 function handling now supports the mandatory command identifiers.
1855 * Added SILC_CLIENT_COMMAND_EXEC_PENDING macros to all command reply
1856 funtions in client to fully support pending command callbacks.
1858 * NOTE: the name_list in USERS (old NAMES) command is NOT sent anymore
1859 as one of the arguments to the application in the command reply
1862 * NOTE: The FORWARDED flag is depracated. It used to be depracated
1863 before first releasing SILC but came back. Now it is removed again
1864 and should come back nomore. The FORWARDED flag was used only
1865 by the JOINing procedure by forwarding the command packet to router.
1866 Now, the JOINing procedure has been changed to more generic (due
1867 to various router environment issues) and FORWARDED is not needed
1868 anymore for anything. The protocol specification is yet to be
1871 Now, removed silc_server_packet_forward from server and the flag
1872 SILC_PACKET_FORWARDED from lib/silccore/silcpacket.h.
1874 Tue Jan 30 00:05:05 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1876 * Renamed NAMES command to USERS command. The NAMES was named that
1877 due to historical reasons. Now it is renamed. Also, rewrote
1878 parts of the USERS command. The nickname list is not sent anymore
1879 by the server. Only Client ID and mode lists are sent in the USERS
1880 command. Changed this also to the protocol specification.
1882 The client now resolves the names and stuff after it receives
1883 the USERS list from the server when joining to the channel.
1885 * WHOIS and IDENTIFY commands has been changed to support multiple
1886 Client ID's per command. One can now search for multiple users
1887 in the network by sending only one WHOIS or IDENTIFY command.
1888 Changed the code and the protocol specifications.
1890 * Removed silc_server_command_identify_parse and changed that IDENTIFY
1891 uses silc_server_command_whois_parse to parse the request. */
1893 * If normal server, do not parse the WHOIS and IDENTIFY requests
1894 before sending it to the router. Saves some time.
1896 Sun Jan 28 16:19:49 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1898 * Fixed JOIN command on client library. Wrong number of arguments
1899 used to crash the client.
1901 * Added silc_server_channel_has_global function to check whether
1902 channel has global users or not.
1904 * Added silc_server_channel_has_local function to check whether channel
1905 has locally connected clients on the channel.
1907 * The silc_server_remove_from_one_channel now checks whether the
1908 channel has global users or not after given client was removed from
1909 the channel. It also checks whether the channel has local clients
1910 on the channel anymore. If it does not have then the channel entry
1911 is removed as it is not needed anymore.
1913 * The silc_server_notify now checks on JOIN notify whether the joining
1914 client is one of locally connected or global. If it is global then
1915 the channel has now global users on the channel and that is marked
1916 to the channel entry. Also, it now saves the global client to
1917 global list who is joining and JOINs it to the channel. This is
1918 for normal server, that is.
1920 Changed silc_server_send_notify_on_channel,
1921 silc_server_packet_relay_to_channel and
1922 silc_server_packet_send_to_channel check if we are normal server
1923 and client has router set (ie. global client) do not send the
1924 message to that client, as it is already routed to our router.
1926 * Implemented LEAVE notify type handling in silc_server_notify
1929 * Tested LEAVE command in router environment successfully. Tested
1930 with two routers, two servers and two clients.
1934 * idlist_find_xxx_by_id routines now dumps the ID on the debug mode.
1936 * Implemented SIGNOFF notify type handling in silc_server_notify
1939 * silc_server_remove_id now removes the client entry from all channels
1940 it has joined and thusly sends SIGNOFF notify type.
1942 * Rewrote the NAMES list generation in server by removing two excess
1943 loops. The lists are created now inside one loop.
1945 Sat Jan 27 22:34:56 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1947 * silc_server_remove_channel_user checks now also global list
1948 for channel and client.
1950 * silc_server_new_channel_user checks now both local and global
1951 list for channel and client. Fixed a bug in client id decoding.
1952 Used to decode wrong buffer.
1954 * silc_server_channel_message checks now both local and global
1955 list for channel entry.
1957 * Tested channel joining (hence JOIN) in router environment
1958 successfully. Tested with two routers, two servers and two
1961 * Tested channel message sending in router environment successfully.
1963 Thu Jan 11 03:22:57 EET 2001 Pekka Riikonen <priikone@poseidon.pspt.fi>
1965 * Added silc_server_save_channel_key into server.[ch] to save the
1966 received channel key in Channel Key payload processing. It is
1967 also used in JOIN command reply handling.
1969 Equivalent function silc_client_save_channel_key added into
1970 client.[ch] into client library.
1972 * Changed JOIN command reply to send information whether the channel
1973 was created or not (is existing already) and the channel key
1974 payload. Changed protocol specs accordingly.
1976 * Fixed bugs in WHOIS and IDENTIFY command reply sending when
1977 the request was sent by ID and not by nickname. Crashed on
1980 Sat Dec 23 21:55:07 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
1982 * Fixed a bug in Client library. IDENTIFY and WHOIS reply functions
1983 now correctly save the received data.
1985 * silc_server_free_sock_user_data now notifies routers in the
1986 network about entities leaving the network.
1988 At the same time implemented functions silc_server_remove_id
1989 and silc_server_send_remove_id to receive and send REMOVE_ID
1990 packets. The packet is used to notify routers in the network
1991 about leaving entities. The ID removed will become invalid in
1994 * Added function silc_idlist_del_server into server. Removes and
1995 free's server entry from ID list.
1997 * silc_server_private_message function now checks, if we are router,
1998 that the destination ID really is valid ID, naturally.
2000 * In router when NEW_ID packet is received (for new client) the
2001 hash of the Client ID is saved in the ID Cache but the
2002 client->nickname is set to NULL, instead of putting the hash
2005 IDENTIFY command now also checks that client->nickname must be
2006 valid. If it is not if will request the data from the server who
2007 owns the client. Added new function
2008 silc_server_command_identify_check.
2010 * Added silc_command_set_command into lib/silccore/silcommand.[ch]
2011 to set the command to already allocated Command Payload.
2013 * Tested private message sending in router environment with two
2014 routers, two servers and two clients. Fixed minor bugs and now
2017 * Fixed segfault from client's NAMES command. Used to crash if
2020 * Forwarded packets must not be routed even if it is not destined
2021 to the receiver. Changed server code comply with this.
2023 Sun Dec 17 14:40:08 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2025 * Added `require_reverse_mapping' boolean value to ServerParams
2026 structure. If TRUE (not default) the server will require that
2027 the connecting host has fully qualified domain name.
2029 If the reverse mapping is not required and hostname could not be
2030 found the IP address is used as hostname.
2032 Sat Dec 16 17:39:54 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2034 * Implemented version string checking to both client and server.
2035 The check is incomplete currently due to the abnormal version
2036 strings used in development version of SILC.
2038 * Changed all command functions in server to use the new
2041 Fri Dec 15 15:55:12 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2043 * Changed char *data to unsigned char *data in ID Cache system to
2044 support binary data as ID Cache data. Changed code to support
2045 binary data in lib/silccore/idcache.c.
2047 * Renamed silc_server_packet_relay_command_reply to
2048 silc_server_command_reply as it is normal packet receiving
2049 function. Rewrote the function to accept command replys for
2050 servers and not only for clients.
2052 * Mark remote router always as registered server if we are connecting
2053 to it. Otherwise, commands sent by the router to us are ignored.
2055 * All ID List find routines now returns the ID Cache Entry pointer
2056 as well if requested.
2058 * WHOIS command works now in router environment, tested with two
2059 routers, two servers and two clients.
2061 * Cleaned up and rewrote IDENTIFY command. IDENTIFY should work now
2062 in router environment (as it is almost equivalent to WHOIS) but
2063 hasn't been tested thoroughly. Added new functions:
2065 silc_server_command_identify_parse
2066 silc_server_command_identify_send_reply
2067 silc_server_command_identify_from_client
2068 silc_server_command_identify_from_server
2070 * Disabled route cache adding because adding two different ID's with
2071 same IP replaces the old cache entry thus giving wrong route.
2072 The entry->router->connection is always the fastest route anyway
2073 so route cache may not be needed. Of course, new routes maybe
2074 established after receiving the ID when the entry->router->connection
2075 might not be anymore the most optimal.
2077 Thu Dec 14 15:55:35 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2079 * Add route cache for received ID for fast routing.
2081 * Added silc_server_packet_route to route received packet on router
2082 that is not destined to us.
2084 * Renamed silc_server_get_route to silc_server_route_get.
2086 * Added id_string and id_string_len fields into SilcServer to
2087 include encoded ServerID for fast comparing without excess
2088 encoding of the ID's.
2090 * Cleaned up WHOIS command on server side. Added following static
2093 silc_server_command_whois_parse
2094 silc_server_command_whois_check
2095 silc_server_command_whois_send_reply
2096 silc_server_command_whois_from_client
2097 silc_server_command_whois_from_server
2099 * Added macro SILC_SERVER_COMMAND_CHECK_ARGC to check mandatory
2100 arguments in command replies. All command functions should be
2101 updated to use this macro.
2103 Sun Dec 10 23:52:00 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2105 * Minor typo fixes on command reply handling on server.
2107 Tue Nov 28 11:05:39 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2109 * Added silc_server_command_add_to_channel internal routine to add
2110 the client to the channel after router has created the channel and
2111 sent command reply to the server.
2113 * Added generic silc_server_send_command to send any command from
2116 * Use static buffer with ID rendering instead of duplicating data.
2118 Mon Nov 27 21:39:40 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2120 * Fixed a channel user mode bug when joining to a channel server gave
2121 everybody channel founder rights, oops.
2123 * We mark ourselves as the router of the incoming server connection
2124 if we are router ourselves. This way we can check in some packet
2125 sending functions whether it is locally connected server. For
2126 incoming router connections we put NULL.
2128 * For router sending packets locally means now always sending the
2129 packet cell wide; to local clients and local servers. For normal
2130 server sending packet locally means sending it to only local
2133 * Fixed the JOIN command to really work in router environment. If the
2134 channel is created it is always created by the router. Router is
2135 also responsible of making the initial joining to the channel,
2136 sending JOIN notify to the sending server and distributing
2137 NEW_CHANNEL and NEW_CHANNEL_USER packets. Hence, if the channel
2138 does not exist server doesn't do anything else but forward the
2139 command to the router which performs everything.
2141 * Added silc_server_send_channel_key function to send the Channel Key
2144 * Added silc_server_create_channel_key to create new channel key. The
2145 channel key is now re-generated everytime someone joins or leaves
2146 a channel, as protocol dictates. Note: channel->key_len is the
2149 Wed Nov 22 22:14:19 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2151 * Splitted server.[ch] finally. Created now packet_send.[ch] and
2152 packet_receive.[ch] to separate packet sending and receiving
2153 routines. The server.[ch] now includes everything else including
2154 actual packet processing (writing and reading data) and other
2157 Renamed silc_server_private_message_send_internal to
2158 silc_server_send_private_message. The routine is still though
2159 used only to relay private messages as server does not send
2160 private messages itself.
2162 Renamed silc_server_new_channel to silc_server_create_new_channel
2163 and added new function sicl_server_new_channel that handles the
2164 incoming New Channel packet. Added also new sending function
2165 silc_server_send_new_channel to send New Channel Payload.
2167 * Added new function silc_server_notify to process incoming notify
2168 packet to the server/router. Server may then relay the notify
2169 to clients if needed.
2171 * Added new function silc_server_new_channel_user to process incoming
2172 New Channel User packet. Router will redistribute the packet and
2173 send JOIN notify to its local clients and locally connected servers
2174 if needed. Normal server will send JOIN notify to its local client
2175 on same channel when received this packet. Added also corresponding
2176 sending function silc_server_send_new_channel_user to sent the
2179 * Added boolean route argument to send_notif_to_channel and
2180 packet_send_to_channel functions to attempt to route the packet
2181 if it is TRUE and send only locally if it is FALSE.
2183 Tue Nov 21 19:49:31 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2185 * silc_server_replace_id now broadcasts the received replace ID
2186 packet if it is not broadcast packet already. The router must
2187 broadcast to inform other routers about changed ID.
2189 * Added backpointer to server's router into SilcServer context in
2190 silcd/server_internal.h.
2192 * Fixed silc_server_packet_broadcast to send correct broadcast
2195 * The channel key is now distributed to the local client as soon
2196 as it is received from the router (in router environment) so that
2197 no other packet may be sent for the channel until client has
2200 * silc_server_remove_channel_user now broadcasts the received
2201 Remove Channel User packet if it is not broadcast packet already.
2202 The router must broadcast to inform other routers about removed
2205 * Added users field into SilcPacketContext that is a reference count
2206 of the context. One can increase the reference count by calling
2207 silc_packet_context_dup which is now changed to just increase the
2208 reference count instead of duplicating the data. The reference
2209 count is decresed by calling silc_packet_context_free that will
2210 free the data after the reference count hits zero.
2212 For now on the packet context and everything allocated into it
2213 (including the raw packet from network) must be freed by calling
2214 the new silc_packet_context_free function. Added also new function
2215 silc_packet_context_alloc that must be used now to allocate the
2216 context. This also means that if a routine is asynchronous from
2217 silc_[client/server]_packet_parse_type the packet context must
2218 be duplicated by calling silc_packet_context_dup. Otherwise it
2219 gets free'd after silc_[client/server]_packet_parse_type returns.
2220 Also, one must remember that if packet is duplicated then its
2221 reference count must be decresed by calling the free function as
2222 many times as it was duplicated.
2224 * Changed SilcBuffer field from protocol contexts to SilcPacketContext
2225 from both client and server.
2227 Mon Nov 20 23:47:03 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2229 * Made joining to a channel working in router environment.
2231 * Cleaned up JOIN command on server side and create function
2232 silc_server_command_join_channel internal routine to make the
2235 Thu Nov 9 21:12:39 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2237 * Changed silc_command_pending list to SilcDList. Also, added
2238 `ident' field to SilcServerCommandPending structure to identify
2239 the reply and to call correct callback.
2241 Added silc_server_command_pending_check function to replace the
2242 corresnponding macro. The silc_command_pending list is not
2245 * Added silc_command_set_ident into lib/silccore/silccommand.[ch]
2246 to set identifier to previously allocated Command Payload. It
2247 is used to set identifier for command when resending Command
2250 * Added silc_command_payload_encode_payload to encode Command
2251 Payload buffer from SilcCommandPayload structure.
2253 * Added silc_argument_payload_encode_payload to encode Argument
2254 payload buffer from SilcArgumentPayload structure.
2256 Wed Nov 8 21:03:28 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2258 * Changed WHOIS command to support router connection on server side.
2259 The whois request is always sent to router unless the server is
2260 standalone server. After server has received the reply from the
2261 router will it send the reply to the client.
2263 * Added silc_server_packet_broadcast into silcd/server.[ch] to
2264 broadcast received broadcast packet. The function is used only
2265 by router. The broadcast packet is always sent to the router's
2268 * Added silc_id_render function in lib/silcutil/silcutil.[ch] to
2269 render given ID to printable string, for log files for example.
2271 Tue Nov 7 22:14:19 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2273 * Made basic router to router connections working. At least they
2274 can now connect to each other but nothing really works the way
2275 they are supposed - yet.
2277 * Added new initiator token to RouterConnection configuration
2278 file in silcd/serverconfig.[ch]. It is used to tell whether we
2279 are the initiator to the remote router or whether we'll expect
2280 the other end to connect.
2282 * Moved registering of listener task to silc_server_init, hence
2283 the server starts listenning as soon as it is run, even if it
2284 does not have connections to other routers. Let's see how well
2287 * Changed default connection retry timeouts for more suitable in
2290 * Removed cipher and such arguments from silc_idlist_add_client
2291 and silc_idlist_add_server prototypes from silcd/idlist.[ch].
2292 Added new function silc_idlist_add_data to add the keys and stuff
2295 * Added SilcIDListData structure and added it to SilcClientEntry
2296 and SilcServerEntry as their first field in the structure. This
2297 way we can explicitly cast the ID entries to the SilcIDListData
2298 structure and get common data for the entries. In past, we had
2299 to first check what type of connection it is and then cast it to
2300 correct ID entry type. Now, we can directly cast the opaque
2301 pointer to the SilcIDListData (no matter what ID entry it actually
2302 is) and get the data needed.
2304 Mon Nov 6 21:56:12 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2306 * Wow, found a bug in scheduler. The scheduler uninitialized itself
2307 in some circumstances even if threre were timeout tasks, though not
2308 IO tasks, but tasks anyway. Now fixed.
2310 * Defined SilcServerConnection structure to hold connection specific
2311 stuff about directly connected servers and routers. The definition
2312 is currently in silcd/server_internal.h. I thought about having
2313 a bit more important role fro this struct but for now it is used
2314 only when connecting to other server (or router actually).
2316 * Added connecting retry support in server when connecting to
2317 router(s). The retry feature implement exponential backoff
2318 algorithm. Also, added SilcServerParams structure to hold default
2319 parameters for server. For now, it include these retry settings
2320 and are hard coded. After server is moded to be as Silc Server
2321 Library this structure will be more important.
2323 Sun Nov 5 22:28:44 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2325 * Changed client librarys channel->clients table to SilcList and
2326 changed code accordingly.
2328 Thu Nov 2 16:28:01 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2330 * Changed client's channel table to SilcList and changed code
2331 accordingly. Also changed SilcChannelClientEntry to include back-
2332 pointer to the channel so that client entry can use that structure
2333 as list as well and we have fast cross-reference to the channel.
2334 This change dramatically decreased the complexity of channel
2335 handling with client entry and vice versa (removed one extra
2336 loop when searching for channel entry from many functions).
2338 * Changed server->sim from table to SilcDList and changed code
2341 * NAMES command can now be used from user interface. It will show
2342 the user list on the channel, neatly.
2344 * Added realname pointer to SilcClientEntry in lib/silcclient/idlist.h.
2345 Code now saves realname of the user if it becomes available.
2347 * Renamed configure.in to configure.in.pre and made ./prepare
2348 script to automatically add correct version string to
2349 configure.in which it creates from configure.in.pre.
2351 Wed Nov 1 17:21:26 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2353 * NAMES command reply now shows users mode with the nickname when
2356 * Moved silc_client_ch[u]mode[_char] functions from
2357 silc/clientutil.[ch] to lib/silcclient/client.[ch]. Though, that
2358 place sucks, they are utility functions and should be in some
2361 * Fixed some unsigned int's to unsigned short's. Patch by cras.
2363 * Fixed contrib/getopt*.[ch] to not require config.h. Patch by
2366 Tue Oct 31 20:10:37 EET 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2370 * Added TRQ (efficient deque and list library) into lib/trq. This is
2371 a very good list library that is currently used in the SILC. Defined
2372 SilcList API over the library because I didn't like the API very
2373 much. See lib/trq/silclist.h for the API and examples of how to
2374 use the API. Fixed various places in the code to use the new
2375 SilcList API. The SilcList is meant for lists that has a structure
2376 already defined as a list. It is not suitable to add just some
2377 context to the list (in TRQ, the context is the list actually).
2379 So, I defined SilcDList that can be used for the purpose where
2380 predefined list structure does not exit. This can be used as
2381 such list. Now some context just can be added to the SilcDList.
2382 Currently this list is not used in the SILC just yet, though there
2383 are a lot places where this can replace dynamically allocated
2384 tables and I will fix these places, later, to use SilcDList.
2385 See lib/trq/silcdlist.h for SilcDList (they are all inline functions,
2386 and use TRQ internally).
2388 Also fixed some annoying warning messages that the original TRQ
2389 code generated. Also minor changes to TRQ's Makefile.in.
2391 * Added support for querying by Client ID to both WHOIS and
2392 IDENTIFY commands into server, as required by the protocol.
2394 * Removed method function pointers from SilcBuffer structure. They
2395 weren't used to anything and just increased the context size for
2396 no good reason. This change also made silc_buffer_alloc and
2397 silc_buffer_free functions inline functions.
2399 * Disabled command flooding detection support until it's fixed so
2400 that it accepts commands in but does not execute them more than once
2403 * Added silc_net_localhost(), to return local hostname, into
2404 lib/silcutil/silcnet.[ch]. Also added client->hostname pointer
2405 that must be initialized before calling silc_client_init.
2407 * Added new function: silc_server_send_notify_on_channels to send
2408 notify messages to all channels client has joined. It is assured
2409 that the message is sent only once per client.
2411 * Moved silc_log_format (from lib/silcutil/silclog.[ch] into
2412 lib/silcutil/silcutil.[ch] as silc_format function. The new
2413 function is generic and is used by server as well, not only by
2414 the logging routines.
2416 * Added new SKE status type: SILC_SKE_STATUS_BAD_VERSION to indicate
2417 the provided version string was not acceptable. Added new function:
2418 silc_ske_check_version into lib/silcske/silcske.h. The function
2419 must be implemented by the application (client or server) and it
2420 does not reside in the SKE library. The function checks the version
2421 string remote end sent.
2423 * Added back pointers (to opaque context and to SilcSocketConnection)
2424 into SilcPacketContext structure into lib/silccore/silcpacket.h.
2426 * Added silc_packet_context_dup into lib/silccore/silcpacket.[ch] to
2427 duplicate packet context structure.
2429 * Changed `notify' client operation to send same arguments as client
2430 receives from server except for ID's. ID's are mapped to correct
2431 ID entry and that is returned. Also, if channel entry is not sent
2432 by server but the notify is for channel the channel entry is sent
2433 to application (otherwise application doesn't know that it is for
2434 channel (library gets it from packet's Destination ID)).
2436 * Added silc_client_remove_from_channels into client library to
2437 remove a client from all channels it has joined to. Used when
2438 received SIGNOFF notify from server. Added also new function
2439 silc_client_replace_from_channels to replace old ID entry with
2440 new ID entry on all channels. Used when received NICK_CHANGE
2443 * Fixed ID Cache list handling in silc_idlist_get_client in
2444 lib/silcclient/idlist.c. Also, added silc_idlist_get_client_by_id
2445 to get (or query) client by ID.
2447 * Updated TODO list.
2449 * Added connection authentication status message defined by the
2450 protocol: SILC_CONN_AUTH_OK and SILC_CONN_AUTH_FAILED and added the
2451 support for these into the code in client and server side.
2453 * Added generic function silc_client_send_command to send any command
2454 with variable argument list. Application should use this function
2455 to send commands if the command functions provided by the library
2456 does not suite for the application's user interface needs.
2458 * Added new `failure' client operation. Application is notified about
2459 received failure packet if client is executing a protocol. In this
2460 case the protocol's execution has failed.
2462 * Added SKE's end notify to send the SKE_SUCCESS notify message that
2463 is required by the protocol.
2465 * Added SILC_PROTOCOL_STATE_FAILURE to indicate received failure
2466 packet from remote. SILC_PROTOCOL_STATE_ERROR indicates local
2469 * Added status flag to SilcSKE object to indicate realtime status
2470 of the SKE protocol.
2472 * Application receives now exactly same command reply arguments as
2473 the library receives from server. However, if ID is received the
2474 corresponding ID entry is returned to the application (eg. Client
2475 ID is mapped to correct SilcClientEntry entry and that is returned).
2476 Changed command_reply client operation due to this change.
2478 * Changed all ID's in commands and in command replys as ID Payloads.
2479 Change affected both client and server side codes.
2481 All ID's sent in SILC network (with execption of ID's in SILC
2482 Packet header) are sent in ID Payload to support variable length
2485 * Server now notifies nick changes and notifies all clients on
2486 the channels about the new nickname (about the new Client ID,
2489 * Implemented CMODE command to change channel modes. Supports all
2490 channel modes defined by the protocol specs except ban and invite
2491 lists. (Also, private channel key mode is supported but support for
2492 setting private channel key in client is missing, thus, this mode
2493 has no effect on client side (except that server requires that the
2494 client uses private channel key and normal channel traffic does not
2497 Also, invite mode works per se, but INVITE command does not work
2498 yet correctly, so you can set channel as invite only channel but
2499 inviting clients to the channel does not work (it is yet to be
2500 thought what's the best way to do it).
2502 * Added new command SILC_COMMAND_CUMODE to change user mode on the
2503 channel. Defined user modes: CHANNEL_FOUNDER and CHANNEL_OPERATOR.
2504 Implemented CUMODE command to change user's mode on the channel.
2505 Supports all modes defined by the protocol specs.
2507 * Added NAMES command reply to return users modes on the channel.
2509 * Removed unnecessary and slow ciphers from lib/silccrypt.
2511 * Set SO_KEEPALIVE option to connection sockets by default.
2513 * Added new command reply status: SILC_STATUS_USER_NOT_ON_CHANNEL.
2515 * Added notify types: MOTD, CMODE_CHANGE and CUMODE_CHANGE. Also,
2516 redefined the Notify Payload into protocol specs.
2518 * Added silc_id_payload_parse_id to get ID directly from raw
2521 Mon Oct 9 20:57:02 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2523 * Changed SILC_COMMAND_IDENTIFY in protocol specification to
2524 accept searching by Client ID as well.
2526 * Added support for LEAVE and SIGNOFF notify types in client library.
2528 * Added silc_id_payload_parse_data into lib/silccore/silcpayload.[ch]
2529 to parse ID Payload from raw data.
2531 Sun Oct 8 19:33:08 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2533 * Added flags parameter into silc_ske_assemble_security_properties
2534 function in lib/silcske/silcske.[ch].
2536 * Changed notify client operation to fit better for notify messages
2537 sent by server. The notify payload received from server is now
2538 passed to the application (after parsing it to SilcNotifyPayload).
2539 It is application's responsibility to retrieve the arguments
2540 from the payload and show the message the way it wants. The message
2541 sent by server is implementation specific.
2543 * Changed public keys to comply with the protocol specification.
2544 Old public keys are not supported anymore and are not compatible.
2546 * Removed nickname from Channel Payload as the latest draft removed
2547 it. The client must resolve the nickname from the NAMES command
2548 reply received when it joined the channel.
2550 Also, changed all channel_xxxx_payload to channel_payload_xxxx.
2552 Sat Oct 7 21:55:01 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2554 * Fixed some errors in protocol specification drafts.
2556 * Created lib/silccore/silcnotify.c to implement Notify Payload
2557 encoding and decoding, lib/silccore/silcpayload.[ch] to implement
2558 generic payloads described by protocol specifications. The file
2559 includes implementations for ID Payload and Argument Payload.
2561 * Changed Command Payload implementation to use the new Argument
2562 Payload. Changed command_xxxx_payload to command_payload_xxxx
2563 to comply with SILC coding conventions.
2565 * Added suppport for Argument Payload handling in Notify Payload
2566 implementation as protocol requires it. Added the new support
2567 into server and client lib as well.
2569 Thu Oct 5 21:16:28 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2571 * Added support for multiple nicknames on same channel. [n] is
2572 added locally to the nickname if there are more than one same
2573 nicknames on the channel.
2575 * Server now sends all nicknames that matched WHOIS request.
2576 Client also shows the list received from server.
2578 * Added TOPIC command to client side. User can now set and show
2579 current topic on channel.
2581 * Added MOTD command to client and server. Also, server sends the
2582 motd when client connects to the server.
2584 * Changed version strings to comply ISO 8601.
2586 Wed Oct 4 23:29:06 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2588 * Fixed protocol error handling in client library. It should now
2589 cope even if the SKE fails for some reason.
2591 * Made new protocol specification drafts for submitting to IETF.
2593 * Implemented TOPIC command to server in silcd/command.c.
2595 * Added two new notify types into lib/silccore/silcnotify.h:
2596 SILC_NOTIFY_TYPE_NICK_CHANGE and SILC_NOTIFY_TYPE_TOPIC_SET to
2597 notify nickname change and topic setting/change on a channel.
2599 * API change of command_reply operation in client library. The
2600 application gets now the status type received from server as well.
2602 Sat Sep 30 16:57:42 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2604 * Removed the function just added to lib/silcutil/silcschedule.[ch].
2606 * Cras fixed and optimized the packet handling even further and
2607 it should work now. Minor change to the prototype of function
2608 silc_packet_receive_process in lib/silccore/silcpacket.[ch].
2610 Sat Sep 30 08:48:47 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2612 * Added new function into lib/silcutil/silcschedule.[ch]:
2613 silc_schedule_with_fd to select() a specified fd. The function
2614 returns after timeout expires or data arrives or goes. The
2615 function is used by packet routines to wait that all data is
2616 received from network.
2618 * Fixed data reading from network in lib/silccore/silcpacket.c.
2619 The code now assures that all data is read from the fd and then
2620 continues packet processing. This was a bug fix since the code
2621 used to drop some data in some circumstances.
2623 * Added new function into lib/silcclient/client.[ch]:
2624 silc_client_start_key_exchange to start key exchange after
2625 connection has been established to server. The code internally
2626 now uses this funtion but its main purpose was to provide it
2627 for applications that perform their own connecting. After
2628 application has created a connection it merely calls this
2629 function to start the key exchange between client and server.
2630 The library takes care of everything else after that.
2632 Updated also lib/silcclient/README to explain the usage of
2635 * Do not send to application information that connection has
2636 been established. Application gets notified it by connect
2639 Thu Sep 28 23:40:19 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2641 * Applied cras's patch to add silc_schedule_one function. The
2642 function runs scheduler once and returns.
2644 * Fixed the scheduler after cras messed it up. The timeout
2645 handling works now as it's supposed to work.
2647 * Added into lib/silccore/ silcnotify.h to include notify
2648 message types support. Changed silc_server_send_notify*
2649 functions, in server.[ch], to support those new notify types.
2650 Added the support for the notify types into client library,
2651 as well. Added new notify client operation into ops.h in
2654 * Changed silc_server_packet_send_to_channel to send normal
2655 packets instead of just channel message packets. The function
2656 is now used to send the notify packets to channels. It is not
2657 used to send channel message packets anymore, as server never
2660 * Added explicit casting into lib/silcutil/silcbuffmt.c to few
2661 va_arg()s as it seems to require it nowadays. I guess, if SILC
2662 is compiled with older va_arg() the new code should work anyway.
2664 Wed Sep 13 18:10:14 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2666 * Splitted core library. Core library (lib/silccore) includes
2667 now only SILC protocol specific core (and common) components.
2668 Created new utility library (lib/silcutil) that includes more
2669 generic purpose stuff. The stuff for util library was taken
2670 from the old core library. This was minor and easy split.
2672 * Created SILC Client Library (lib/silcclient) that includes
2673 implementation of the SILC client without user interface. This
2674 was major move from silc/ directory. The code has been changed
2675 so that it is transparent towards the user interface. The
2676 silc/ directory includes now the same user interface as before
2677 and it uses the new client library. Read lib/silcclient/README.
2678 Basicly, the client library performs everything else related
2679 to SILC except user interface handling. Also, configuration
2680 files are considered to be part of user interface and library
2681 does not handle them.
2683 This change also changed a lot of structures, function naming etc.
2684 Most important change was that SilcClientWindow object was
2685 renamed to SilcClientConnection in the client library. Created
2686 also new file lib/silcclient/ops.h. Also added new files
2687 silc/local_command.[ch] and silc/client_ops.[ch].
2689 All these changes were made to make it easier for user interface
2690 designers to create what ever user interface for the SILC client
2693 It is also expected that the server will be moved to lib
2694 directory as well and SILC Server Library will be created;
2695 sometimes in the future.
2697 * Removed Local commands from lib/silccore/silccommand.h as
2698 they are application specific and new client library does not
2699 handle any of those anymore.
2701 * Several functions moved to lib/silcutil/silcutilc.[ch] from
2702 old client implementation in silc/.
2704 * Added support for callback functions in SILC_LOG_* macros.
2705 Application can now set its own callbacks that will be called
2706 instead of using the default functions that will always print
2707 the debug messages to stderr (or stdout). Also, debugging can
2708 now be disabled by setting silc_debug to FALSE and re-enabled by
2709 setting it to TRUE. Note, that logging will still work even
2710 if debugging is disabled.
2712 New functions in lib/silcutil/silclog.[ch]: silc_log_set_callbacks,
2713 silc_log_reset_callbacks, silc_log_set_debug_callbacks and
2714 silc_log_reset_debug_callbacks.
2716 * To enable debugging in silc client one must give now -d
2717 option on command line.
2719 * Changed silc_schedule_init to automatically allocate task queues
2720 if they are not allocated before calling it.
2722 Thu Sep 7 10:49:33 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2724 * Added GMP 3.1 into math library.
2726 Sun Aug 20 21:27:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2728 * Added SILC_PACKET_REMOVE_CHANNEL_USER to remove a client from
2729 a channel in SILC network. The packet is used by servers and
2730 routers to notify other routers that user has left a channel.
2731 This little feature was missing until now. Added the feature
2732 to protocol specification as well.
2734 Added functions: silc_server_send_remove_channel_user and
2735 silc_server_remove_channel_user into server.[ch].
2737 * Added SILC_PACKET_REKEY and SILC_PACKET_REKEY_DONE into
2738 lib/silccore/silcpacket.h. However, they are not implemented
2741 Sat Aug 19 23:04:16 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2743 * Fixed joining to a channel and sending channel messages
2744 between server and router. The channel message sending should
2745 now work inside a cell.
2747 Tue Jul 25 20:46:13 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2749 * Fixed the private message sending between server and router.
2750 The private message sending should now work inside a cell.
2752 * Added silc_server_replace_id into server.[ch] to replace
2753 existing ID in the SILC network.
2755 * Added silc_idlist_find_server_by, silc_idlist_replace_client_id
2756 and silc_idlist_replace_server_id into idlist.[ch] in server.
2758 Mon Jul 24 18:33:31 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2760 * Fixed the server to server connections. Server can again now
2761 connect to router. Router to router connections probably does
2764 Thu Jul 20 13:15:01 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2766 * Added dynamic protocol registering support. Now protocols can
2767 registered and unregistered on the fly. Patch by cras.
2769 Wed Jul 19 19:08:46 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2771 * Added lib/contrib directory to hold routines that some platforms
2772 don't have but are needed by SILC.
2774 * Added getopt.c, getopt1.c and getopt.h from GNU C library
2775 into lin/contrib to provide getopt() and getopt_long() for
2776 those who don't have it.
2778 Tue Jul 18 20:41:20 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2780 * Added AWAY command to client. When away message is set and
2781 client receives a private message packet the client automatically
2782 replies to the sender with the away message.
2784 * Fixed a bug in lib/silcmath/mpbin.c: silc_mp_mp2bin. This
2785 bug seemed to be the cause of recent problems when compiling
2788 * Added version detection support to SKE protocol specification
2789 and added the new changes to the SKE implementation as well.
2790 There were other minor changes in the SKE protocol as well.
2792 Many changes in lib/silcske/silcske.[ch] and in
2793 lib/silcske/payload.[ch].
2795 * Added ^U functionality, clear input line. Patch from cras.
2797 Mon Jul 17 23:33:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2799 * Mainly small bugfixes on core library. Fixed some debugging
2800 logging and buffer overflow in silclog.c.
2802 * Updated config.sub and config.guess on the distribution tree.
2804 Sat Jul 15 15:33:48 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2806 * Added command lagging support in server. Client may execute
2807 commands now only once in two seconds.
2809 Thu Jul 13 22:10:21 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2811 * Optimized packet reception. MAC computation and checking is now
2812 also more optimized. A lot previously duplicated code is now
2813 used as generic by both client and server.
2815 * Fixed key pair generation in clientutil.c
2817 Wed Jul 12 18:28:07 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2819 * Added into lib/silccore/silcbufutil.[ch] new function;
2820 silc_buffer_realloc.
2822 * Moved generic packet sending/encryption functions to
2823 lib/silccore/silcpacket.[ch] from client and server. Some
2824 rewriting of the functions.
2826 * Moved all generic packet reception/decryption functions to
2827 lib/silccore/silcpacket.[ch] from client and server. The
2828 packet processing is now much cleaner in both client and server.
2829 These were major changes in both client and server.
2831 * Created many common functions in server to do packet sending.
2832 Previously code were duplicated a lot, this has been removed
2835 Tue Jul 11 20:27:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2837 * Rewrote major parts of the ID cache system. Don't know
2838 whether it is better now or not but at least the API is more
2841 * Major rewrite on ID cache stuff on client because of the ID
2842 cache API changes. Added idlist.c to client.
2844 * Also major rewrite on ID cache stuff on server as well.
2845 Major rewrite of idlist.[ch]. SilcXXXList's are now named
2846 SilcXXXEntry's. We won't keep anymore idlist specific pointers
2847 in hand, instead they are all put into the ID cache system now.
2848 All server_idlist_* routines uses ID cache now instead of
2849 traversing its own lists (those lists does not exist anymore).
2850 SilcIDList though still exists. Also, SilcXXXEntry's are
2853 Sun Jul 9 15:19:24 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2855 * Finally made the SKE implementation compliant to the protocol
2856 specification. All mp integers are now binary encoded as
2857 opposed being HEX encoded.
2859 * Added lib/silcmath/mpbin.[ch]. Encoding mp intergers to and
2862 * Added into lib/silccore/silcutil.[ch] PEM encoding/decoding
2863 functions: silc_[encode/decode]_pem. Also added function
2864 silc_encode_pem_file to PEM encode with newlines ('\n') for
2867 * SILC public keys are now encoded either PEM or binary. Same
2868 option is for private keys as well. By default private keys
2869 are binary encoded and public keys PEM encoded. Silly HEX
2870 encoding were removed.
2872 * Added into lib/silccrypt/silchash.[ch] silc_hash_fingerprint
2873 function to create fingerprints.
2875 * Fixed a bug in SHA1; does not change the original data anymore.
2877 * Partly implemented INFO command on client and server side.
2878 Fixed CLEAR command. Changes to SERVER command; show current
2879 server(s) when giving command without arguments. Added
2880 VERSION command to client.
2882 * Added check to server that unregistered connections cannot
2883 execute commands (unless it is specificly allowed).
2885 Thu Jul 6 18:12:24 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2887 * Fixed screen refresh.
2889 * Fixed channel joining bug from client. On some circumstances
2890 client tried to join to a channel it had already joined.
2892 * Added public key verification process into client's protocol.c.
2893 The client now verifies the public key from user and saves
2894 it into ~./silc/serverkeys/ directory.
2896 Added into: clientutil.[ch]: silc_client_verify_server_key.
2898 * Changed SKE protocol's silc_ske_initiator_finish function
2899 to accept callback function that verifies the received public
2900 key. Removed old silc_ske_verify_public_key function.
2902 Wed Jul 5 19:19:02 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2904 * Added into silcpkcs[ch]: silc_pkcs_public_key[_data]_set and
2905 silc_pkcs_private_key[_data]_set.
2907 * Made the password and public authentication more cleaner in
2908 server's protocol.c.
2910 * Removed historic and obsolete protocol `channel_auth' from
2911 both client and server.
2913 * Removed wrong way of sending command status messages from
2914 server to client in server's command.c. The old way violated
2915 protocol specification.
2917 Changes to silccore/silccommand.[ch]: removed
2918 silc_command_encode_status_payload -> not needed anymore,
2919 changed silc_command_encode_payload_va to accept extra
2920 argument on variable argument list. The argument type must
2921 now be provided to the function. Also, added new function:
2922 silc_command_encode_reply_payload_va which is same as
2923 normal command_encode_payload_va except command status type
2924 is provided as extra argument.
2926 Tue Jul 4 18:26:39 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2928 * Added ~./silc directory handling. The directory includes the
2929 public and private keys for the client.
2931 Added silc_client_check_silc_dir, silc_client_create_identifier
2932 and silc_client_load_keys.
2934 * Implemented SILC protocol compliant public key. Added public
2935 and private key saving to and loading from files.
2937 Added into silcpkcs.[ch]: silc_pkcs_encode_identifier,
2938 silc_pkcs_public_key_encode[_data], silc_pkcs_public_key_decode,
2939 silc_pkcs_private_key_encode[_data], silc_pkcs_private_key_decode,
2940 silc_pkcs_public_key_alloc, silc_pkcs_public_key_free,
2941 silc_pkcs_private_key_alloc and silc_pkcs_private_key_free.
2943 Implemented: silc_pkcs_save_[public/private]_key[_data] and
2944 silc_pkcs_load_[public/private]_key.
2946 Mon Jul 3 18:51:27 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2948 * Added silc_server_get_route (route.[ch]) to get connection
2949 data for the fastest route for given ID.
2951 * Implemented INVITE command on client and server. The command
2952 were re-defined in the SILC Protocol Specification and the
2953 implementation now complies with the specification.
2955 * Implemented PING command on client and server.
2957 * Implemented NAMES command on client and server. The server side
2958 supports currently only normal server not router server yet.
2959 Some changes to NAMES definition in SILC protocol specification.
2961 Sun Jul 2 18:23:01 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2963 * Implemented LEAVE command on client and server.
2965 * Previously deprecated SILC_PACKET_FORWARDED flag is now in use
2966 again. This change was made to the protocol as well. Server
2967 should not violate the protocol specification anymore.
2969 Fri Jun 30 14:03:26 EEST 2000 Pekka Riikonen <priikone@poseidon.pspt.fi>
2971 * Added SOCKS4 and SOCKS5 support to SILC client. SOCKS5
2972 was tested. SOCKS4 was not but should work anyway.
projects / silc.git / blob