# Quality of Service (QoS) settings. The QoS can be used to handle
# the incoming data and limit its handling rate to avoid flooding.
# By default QoS is disabled and can be enabled by setting "qos" to
- # true value. The "qos_rate_limit" is the incmoing data reading
- # per second, and if more frequently than the set limit is read the
+ # true value. The "qos_rate_limit" is the data reads per second,
+ # and if more frequently is read due to for example data flooding,
# QoS is applied to the data. The "qos_bytes_limit" is maximum bytes
# allowed for incoming data. If more is received at once the QoS
# is applied to the data. The "qos_limit_sec" and "qos_limit_usec"
# is the timeout used to delay the data handling, seconds and
- # microseconds, respectively. This can be overridden with
+ # microseconds, respectively. NOTE: If you enable QoS in General
+ # section it applies to server connections as well. Server
+ # connections SHOULD NOT use QoS. This can be overridden with
# ConnectionParams.
#qos = true;
- #qos_rate_limit = 5;
- #qos_bytes_limit = 1024;
+ #qos_rate_limit = 10;
+ #qos_bytes_limit = 2048;
#qos_limit_sec = 0;
#qos_limit_usec = 500000;
};
# microseconds, respectively. For server connections QoS SHOULD NOT
# be set.
#qos = true;
- #qos_rate_limit = 5;
- #qos_bytes_limit = 1024;
+ #qos_rate_limit = 10;
+ #qos_bytes_limit = 2048;
#qos_limit_sec = 0;
#qos_limit_usec = 500000;
};
#
# The authentication data is specified by Passphrase and/or PublicKey.
# If both are provided then both password and public key based authentication
-# is allowed. If the Publickey is used it includes the file path to the
-# public key file. If none of them is provided then authentication is not
-# required. The PublicKey can be set multiple times to set multiple
-# public keys for one connection.
+# is allowed. The "PublicKey" includes the single key contained in the
+# specified file, while "PublicKeyDir" includes all files in the specified
+# directory, which must all be valid public keys with ".pub" suffix.
#
# Next example connection will match to all incoming client connections,
# and no authentication is required.
Client {
#Host = "10.1.*";
#Passphrase = "secret";
- #PublicKey = "/path/to/the/user_my.key";
- #PublicKey = "/path/to/the/user_221.key";
- #PublicKey = "/path/to/the/user_313.key";
+ #PublicKey = "/path/to/the/user_my.pub";
+ #PublicKey = "/path/to/the/user_221.pub";
+ #PublicKey = "/path/to/the/user_313.pub";
+ #PublicKeyDir = "/path/to/keys/dir/";
Params = "normal";
};
User = "priikone";
Nick = "pekka";
Passphrase = "verysecret";
- # PublicKey = "/path/to/the/public.key";
+ # PublicKey = "/path/to/the/public.pub";
};
#
ServerConnection {
Host = "10.2.1.7";
Passphrase = "verysecret";
- #PublicKey = "/path/to/the/public.key";
+ #PublicKey = "/path/to/the/public.pub";
Params = "normal";
Backup = false;
};
Host = "10.2.1.100";
Port = 706;
Passphrase = "verysecret";
- #PublicKey = "/path/to/the/public.key";
+ #PublicKey = "/path/to/the/public.pub";
Params = "normal";
Initiator = true;
#BackupHost = "10.2.1.6";