<count> option were defined in the query there will be only
<count> many replies from the server.
- The server may return the list of channel the client has joined.
- In this case the list is list of Channel Payloads. The Mode Mask
- in the Channel Payload (see [SILC2] and section 2.3.2.3 for the
- Channel Payload) is the client's mode on the channel. The list
- is encoded by adding the Channel Payloads one after the other.
+ The server may return the list of channels if the client has
+ joined channels. In this case the list is list of Channel
+ Payloads. The Mode Mask in the Channel Payload (see [SILC2] and
+ section 2.3.2.3 for the Channel Payload) is the client's mode
+ on the channel. The list is encoded by adding the Channel
+ Payloads one after the other.
The server may also send client's user mode, idle time, and the
fingerprint of the client's public key. The <fingerprint> is the
SILC_STATUS_ERR_NO_SERVER_ID
- 11 <deprecated command>
+ 11 SILC_COMMAND_STATS
+
+ Max Arguments: 1
+ Arguments: (1) <Server ID>
+
+ This command is used to fetch various statistical information
+ from the server indicated by <Server ID>, which is the ID of
+ server where sender is connected to. Server receiving this
+ command MAY also send this further to its router for fetching
+ other cell and network wide statistics to accompany the reply.
+
+ Reply messages to the command:
+
+ Max Arguments: 3
+ Arguments: (1) <Status Payload> (2) <Server ID>
+ (3) [<statistics structure>]
+
+ This command replies with the Server ID of the server and
+ optional statistics structure which includes 32 bit MSB first
+ ordered integer values to represent various statistical
+ information. The structure is as follows:
+
+ starttime - time when server was started
+ uptime - uptime of the server
+ my clients - number of locally connected clients
+ my channels - number of locally created channels
+ my server ops - number of local server operators
+ my router ops - number of local router operators
+ cell clients - number of clients in local cell
+ cell channels - number of channels in local cell
+ cell servers - number of servers in local cell
+ clients - number of client in SILC network
+ channels - number of channels in SILC network
+ servers - number of servers in SILC network
+ routers - number of routers in SILC network
+ server ops - number of server operators in SILC network
+ router ops - number of router operators in SILC network
+
+ If some value is unknown it is set to zero (0) value. The
+ "starttime" is the start time of the server, and is seconds
+ since Epoch (POSIX.1). The "uptime" is time difference of
+ current time and "starttime" in the server, and is seconds
+ in value.
+
+ Status messages:
+
+ SILC_STATUS_OK
+ SILC_STATUS_ERR_NOT_REGISTERED
+ SILC_STATUS_ERR_NOT_ENOUGH_PARAMS
+ SILC_STATUS_ERR_TOO_MANY_PARAMS
+ SILC_STATUS_ERR_NO_SUCH_SERVER_ID
+ SILC_STATUS_ERR_NO_SUCH_SERVER
+ SILC_STATUS_ERR_NO_SERVER_ID
12 SILC_COMMAND_PING
16 SILC_COMMAND_UMODE
Max Arguments: 2
- Arguments: (1) <Client ID> (2) <client mode mask>
+ Arguments: (1) <Client ID> (2) [<client mode mask>]
This command is used by client to set/unset modes for itself.
However, there are some modes that the client MUST NOT set itself,
No specific mode for client. This is the initial
setting when new client is created. The client is
- normal client now.
+ normal client and is present in the network.
0x00000001 SILC_UMODE_SERVER_OPERATOR
0x00000002 SILC_UMODE_ROUTER_OPERATOR
Marks the user as router (SILC) operator. Client
- MUST NOT this mode itself. Router sets this mode to
- the client when client attains the router operator
+ MUST NOT set this mode itself. Router sets this mode
+ to the client when client attains the router operator
privileges by SILC_COMMAND_SILCOPER command. Client
MAY unset the mode itself.
Marks that the user is not currently present in the
SILC Network. Client MAY set and unset this mode.
+
+ 0x00000008 SILC_UMODE_INDISPOSED
+
+ Marks that the user is currently indisposed and may
+ not be able to receive any messages, and that user may
+ not be present in the network. Client MAY set and
+ unset this mode.
+
+
+ 0x00000010 SILC_UMODE_BUSY
+
+ Marks that the user is currently busy and may not
+ want to receive any messages, and that user may not
+ be present in the network. Client MAY set and unset
+ this mode.
+
+
+ 0x00000020 SILC_UMODE_PAGE
+
+ User is not currently present or is unable to receive
+ messages, and prefers to be paged in some mechanism
+ if the user needs to be reached. Client MAY set and
+ unset this mode.
+
+
+ 0x00000040 SILC_UMODE_HYPER
+
+ Marks that the user is hyper active and is eager to
+ receive and send messages. Client MAY set and unset
+ this mode.
+
+
+ 0x00000080 SILC_UMODE_ROBOT
+
+ Marks that the client is actually a robot program.
+ Client MAY set and unset this mode.
+
+
+ 0x00000100 SILC_UMODE_ANONYMOUS
+
+ Marks that the client is anonymous client. Server
+ that specificly is designed for anonymous services
+ can set and unset this mode. Client MUST NOT set or
+ unset this mode itself. A client with this mode set
+ would have the username and the hostname information
+ scrambled by the server which set this mode.
+
+
+ 0x00000200 SILC_UMODE_BLOCK_PRIVMSG
+
+ Marks that the client wishes to block private
+ messages sent to the client, unless the Private
+ Message Key flag is set in the SILC packet header.
+ If this mode is set server MUST NOT deliver private
+ messages to the client without the Private Message
+ Key flag being set.
+
+ A separate service could provide additional filtering
+ features for accepting private messages from certain
+ sender. However, this document does not specify such
+ service.
+
+ The client MAY set and unset this mode.
+
+
+ 0x00000400 SILC_UMODE_DETACHED
+
+ Marks that the client is detached from the SILC network.
+ This means that the actual network connection to the
+ client is lost but the client entry is still valid. The
+ detached client can be resumed at a later time. This
+ mode MUST NOT be set by client. It can only be set when
+ client has issued command SILC_COMMAND_DETACH. The server
+ sets this mode. This mode cannot be unset with this
+ command. It is unset when the client is resuming back to
+ the network and SILC_PACKET_RESUME_CLIENT packet is
+ received.
+
+ This flag MUST NOT be used to determine whether a packet
+ can be sent to the client or not. Only the server that
+ had the original client connection can make the decision
+ by noticising that the network connection is not active.
+ In this case the default case is to discard the packet.
+
+ If the <client mode mask> was not provided this command merely
+ returns the mode mask to the client.
+
+
Reply messages to the command:
Max Arguments: 2
17 SILC_COMMAND_CMODE
Max Arguments: 7
- Arguments: (1) <Channel ID> (2) <channel mode mask>
+ Arguments: (1) <Channel ID> (2) [<channel mode mask>]
(3) [<user limit>] (4) [<passphrase>]
(5) [<cipher>] (6) [<hmac>]
(7) [<auth payload>]
channel the server MUST distribute the changed channel mode mask
to all clients on the channel by sending the notify type
SILC_NOTIFY_TYPE_CMODE_CHANGE. The notify type MUST also be sent
- to the server's primary router.
+ to the server's primary router. If the <channel mode mask> was
+ not provided this command merely returns the mode mask to the
+ client.
Reply messages to the command:
Sets channel operator privileges on the channel for a
client on the channel. Channel founder and channel operator
- MAY set/unset this mode.
+ MAY set/unset this mode. The client MAY remove this mode
+ at any time.
+
+
+ 0x00000004 SILC_CUMODE_BLOCK_MESSAGES
+
+ Marks that the client wishes not to receive any channel
+ messages sent for the channel. Client MAY set and unset
+ this mode to itself. Client MUST NOT set it to anyone else.
+ When this mode is set server MUST NOT deliver channel
+ messages to this client. Other packets such as channel
+ key packets are still sent to the client.
+
+ A separate service could provide additional filtering
+ features for accepting channel messages from certain
+ sender. However, this document does not specify such
+ service.
+
Reply messages to the command:
1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-| Status Message |
+| Status | Error |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
.in 3
.in 6
-o Status Message (2 bytes) - Indicates the status message.
- All Status messages are described in the next section.
+o Status (1 byte) - Indicates the status message type,
+ error, start of list, entry of list or end of list.
+
+o Error (1 byte) - Indicates the error if the Status
+ field is some list status, which means there are list
+ of errors.
.in 3
+The values in Status and Error fields are set according
+the following rules:
+
+.in 6
+o If there is single reply and error has not occurred
+ then Status field includes value SILC_STATUS_OK, and
+ the Error field MUST be ignored (and set to zero
+ value).
+
+o If there is single error, then Status field includes
+ one of the error values, and the Error field MUST be
+ ignored (and set to zero value).
+
+o If there will be multiple successful command replies
+ then Status field includes SILC_STATUS_LIST_START,
+ SILC_STATUS_LIST_ITEM or SILC_STATUS_LIST_END value,
+ and Error field is set to SILC_STATUS_OK.
+
+o If there are multiple error replies then Status field
+ includes SILC_STATUS_LIST_START, SILC_STATUS_LIST_ITEM
+ or SILC_STATUS_LIST_END value, and the Error field
+ includes the error value.
+.in 3
+
+This way it is possible to send single successful or
+single error reply, but also multiple successful and
+multiple error replies. Note that it is possible to
+send both list of successful replies and list of error
+replies at the same time, however in this case the
+list of error replies MUST be sent after the successful
+replies. This way the recipient may ignore the multiple
+errors if it wishes to do so.
+
+All Status messages are described in the next section.
+
.ti 0
2.3.2 SILC Command Status List
projects / silc.git / blobdiff