--- /dev/null
+# aclocal.m4 generated automatically by aclocal 1.5
+
+# Copyright 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# Do all the work for Automake. This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 5
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# We require 2.13 because we rely on SHELL being computed by configure.
+AC_PREREQ([2.13])
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED.
+# The purpose of this macro is to provide the user with a means to
+# check macros which are provided without letting her know how the
+# information is coded.
+# If this macro is not defined by Autoconf, define it here.
+ifdef([AC_PROVIDE_IFELSE],
+ [],
+ [define([AC_PROVIDE_IFELSE],
+ [ifdef([AC_PROVIDE_$1],
+ [$2], [$3])])])
+
+
+# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE])
+# ----------------------------------------------
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first])
+fi
+
+# Define the identity of the package.
+PACKAGE=$1
+AC_SUBST(PACKAGE)dnl
+VERSION=$2
+AC_SUBST(VERSION)dnl
+ifelse([$3],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])
+
+# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
+# the ones we care about.
+ifdef([m4_pattern_allow],
+ [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl
+
+# Autoconf 2.50 always computes EXEEXT. However we need to be
+# compatible with 2.13, for now. So we always define EXEEXT, but we
+# don't compute it.
+AC_SUBST(EXEEXT)
+# Similar for OBJEXT -- only we only use OBJEXT if the user actually
+# requests that it be used. This is a bit dumb.
+: ${OBJEXT=o}
+AC_SUBST(OBJEXT)
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal)
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake)
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_PROVIDE_IFELSE([AC_PROG_][CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_][CC],
+ defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_][CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_][CXX],
+ defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+
+# serial 2
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ am_backtick='`'
+ AC_MSG_WARN([${am_backtick}missing' script is too old or missing])
+fi
+])
+
+# AM_AUX_DIR_EXPAND
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND], [
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
+])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# serial 4 -*- Autoconf -*-
+
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ---------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX" or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc']
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ echo '#include "conftest.h"' > conftest.c
+ echo 'int i;' > conftest.h
+ echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=conftest.c object=conftest.o \
+ depfile=conftest.Po tmpdepfile=conftest.TPo \
+ $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
+ grep conftest.h conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type"
+AC_SUBST([$1DEPMODE])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[rm -f .deps 2>/dev/null
+mkdir .deps 2>/dev/null
+if test -d .deps; then
+ DEPDIR=.deps
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ DEPDIR=_deps
+fi
+rmdir .deps 2>/dev/null
+AC_SUBST(DEPDIR)
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking Speeds up one-time builds
+ --enable-dependency-tracking Do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+pushdef([subst], defn([AC_SUBST]))
+subst(AMDEPBACKSLASH)
+popdef([subst])
+])
+
+# Generate code to set up dependency tracking.
+# This macro should only be invoked once -- use via AC_REQUIRE.
+# Usage:
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[
+AC_OUTPUT_COMMANDS([
+test x"$AMDEP_TRUE" != x"" ||
+for mf in $CONFIG_FILES; do
+ case "$mf" in
+ Makefile) dirpart=.;;
+ */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;;
+ *) continue;;
+ esac
+ grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
+ # Extract the definition of DEP_FILES from the Makefile without
+ # running `make'.
+ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n -e '/^U = / s///p' < "$mf"`
+ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+ # We invoke sed twice because it is the simplest approach to
+ # changing $(DEPDIR) to its actual value in the expansion.
+ for file in `sed -n -e '
+ /^DEP_FILES = .*\\\\$/ {
+ s/^DEP_FILES = //
+ :loop
+ s/\\\\$//
+ p
+ n
+ /\\\\$/ b loop
+ p
+ }
+ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`echo "$file" | sed -e 's|/[^/]*$||'`
+ $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+], [AMDEP_TRUE="$AMDEP_TRUE"
+ac_aux_dir="$ac_aux_dir"])])
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+ @echo done
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include='#'
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote='"'
+ _am_result=BSD
+ fi
+fi
+AC_SUBST(am__include)
+AC_SUBST(am__quote)
+AC_MSG_RESULT($_am_result)
+rm -f confinc confmf
+])
+
+# serial 3
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+#
+# FIXME: Once using 2.50, use this:
+# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_DEFUN([AM_CONDITIONAL],
+[ifelse([$1], [TRUE],
+ [errprint(__file__:__line__: [$0: invalid condition: $1
+])dnl
+m4exit(1)])dnl
+ifelse([$1], [FALSE],
+ [errprint(__file__:__line__: [$0: invalid condition: $1
+])dnl
+m4exit(1)])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file.
+
+# serial 3
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. We must strip everything past the first ":",
+# and everything past the last "/".
+
+AC_PREREQ([2.12])
+
+AC_DEFUN([AM_CONFIG_HEADER],
+[ifdef([AC_FOREACH],dnl
+ [dnl init our file count if it isn't already
+ m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0]))
+ dnl prepare to store our destination file list for use in config.status
+ AC_FOREACH([_AM_File], [$1],
+ [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*]))
+ m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index))
+ dnl and add it to the list of files AC keeps track of, along
+ dnl with our hook
+ AC_CONFIG_HEADERS(_AM_File,
+dnl COMMANDS, [, INIT-CMDS]
+[# update the timestamp
+echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index["
+][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS
+ m4_popdef([_AM_Dest])])],dnl
+[AC_CONFIG_HEADER([$1])
+ AC_OUTPUT_COMMANDS(
+ ifelse(patsubst([$1], [[^ ]], []),
+ [],
+ [test -z "$CONFIG_HEADERS" || echo timestamp >dnl
+ patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl
+[am_indx=1
+for am_file in $1; do
+ case " \$CONFIG_HEADERS " in
+ *" \$am_file "*)
+ am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\`
+ if test -n "\$am_dir"; then
+ am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\`
+ for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do
+ am_tmpdir=\$am_tmpdir\$am_subdir/
+ if test ! -d \$am_tmpdir; then
+ mkdir \$am_tmpdir
+ fi
+ done
+ fi
+ echo timestamp > "\$am_dir"stamp-h\$am_indx
+ ;;
+ esac
+ am_indx=\`expr \$am_indx + 1\`
+done])
+])]) # AM_CONFIG_HEADER
+
+# _AM_DIRNAME(PATH)
+# -----------------
+# Like AS_DIRNAME, only do it during macro expansion
+AC_DEFUN([_AM_DIRNAME],
+ [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1,
+ m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1,
+ m4_if(m4_regexp([$1], [^/.*]), -1,
+ [.],
+ m4_patsubst([$1], [^\(/\).*], [\1])),
+ m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])),
+ m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl
+]) # _AM_DIRNAME
+
+# aclocal-include.m4
+#
+# This macro adds the name macrodir to the set of directories
+# that `aclocal' searches for macros.
+
+# serial 1
+
+dnl AM_ACLOCAL_INCLUDE(macrodir)
+AC_DEFUN([AM_ACLOCAL_INCLUDE],
+[
+ AM_CONDITIONAL(INSIDE_GNOME_COMMON, test x = y)
+
+ test -n "$ACLOCAL_FLAGS" && ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"
+
+ for k in $1 ; do ACLOCAL="$ACLOCAL -I $k" ; done
+])
+
+
+define([HACK_SUBST], defn([AC_SUBST]))
+
+# serial 1 AC_PROG_XML_I18N_TOOLS
+AC_DEFUN(AC_PROG_XML_I18N_TOOLS,
+[
+
+dnl This is a hack - we use the expansion of AC_SUBST instead of
+dnl AC_SUBST itself to avoid automake putting
+dnl XML_I18N_MERGE_OAF_RULE = @XML_I18N_MERGE_OAF_RULE@
+dnl in all the Makefile.in's, because that will blow up when substituted.
+XML_I18N_MERGE_OAF_RULE='\%.oaf : \%.oaf.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
+ $(top_builddir)/xml-i18n-merge -o $(top_srcdir)/po $< [$]*.oaf'
+HACK_SUBST(XML_I18N_MERGE_OAF_RULE)
+
+XML_I18N_MERGE_SERVER_RULE='\%.server : \%.server.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
+ $(top_builddir)/xml-i18n-merge -o $(top_srcdir)/po $< [$]*.server'
+HACK_SUBST(XML_I18N_MERGE_SERVER_RULE)
+
+dnl same deal
+XML_I18N_MERGE_KEYS_RULE='\%.keys : \%.keys.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
+ $(top_builddir)/xml-i18n-merge -k $(top_srcdir)/po $< [$]*.keys'
+HACK_SUBST(XML_I18N_MERGE_KEYS_RULE)
+
+dnl same deal
+XML_I18N_MERGE_DESKTOP_RULE='\%.desktop : \%.desktop.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
+ $(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< [$]*.desktop'
+HACK_SUBST(XML_I18N_MERGE_DESKTOP_RULE)
+
+dnl same deal
+XML_I18N_MERGE_DIRECTORY_RULE='\%.directory : \%.directory.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
+ $(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< [$]*.directory'
+HACK_SUBST(XML_I18N_MERGE_DIRECTORY_RULE)
+
+dnl same deal
+XML_I18N_MERGE_SOUNDLIST_RULE='\%.soundlist : \%.soundlist.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
+ $(top_builddir)/xml-i18n-merge -d $(top_srcdir)/po $< [$]*.soundlist'
+HACK_SUBST(XML_I18N_MERGE_SOUNDLIST_RULE)
+
+dnl same deal
+XML_I18N_MERGE_PONG_RULE='\%.pong : \%.pong.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
+ $(top_builddir)/xml-i18n-merge -x $(top_srcdir)/po $< [$]*.pong'
+HACK_SUBST(XML_I18N_MERGE_PONG_RULE)
+
+dnl same deal
+XML_I18N_MERGE_XML_RULE='\%.xml : \%.xml.in $(top_builddir)/xml-i18n-merge $(top_srcdir)/po/*.po\
+ $(top_builddir)/xml-i18n-merge -x $(top_srcdir)/po $< [$]*.xml'
+HACK_SUBST(XML_I18N_MERGE_XML_RULE)
+
+# Always use our own xml-i18n-tools.
+XML_I18N_EXTRACT='$(top_builddir)/xml-i18n-extract'
+AC_SUBST(XML_I18N_EXTRACT)dnl
+
+XML_I18N_MERGE='$(top_builddir)/xml-i18n-merge'
+AC_SUBST(XML_I18N_MERGE)dnl
+
+XML_I18N_UPDATE='$(top_builddir)/xml-i18n-update'
+AC_SUBST(XML_I18N_UPDATE)dnl
+
+AC_PATH_PROG(XML_I18N_TOOLS_PERL, perl)
+if test -z "$XML_I18N_TOOLS_PERL"; then
+ AC_MSG_ERROR([perl not found; required for xml-i18n-tools])
+fi
+if test -z "`$XML_I18N_TOOLS_PERL -v | fgrep '5.' 2> /dev/null`"; then
+ AC_MSG_ERROR([perl 5.x required for xml-i18n-tools])
+fi
+
+dnl manually sed perl in so people don't have to put the xml-i18n-tools scripts in their
+dnl AC_OUTPUT
+AC_OUTPUT_COMMANDS([
+sed -e "s:@XML_I18N_TOOLS_PERL@:${XML_I18N_TOOLS_PERL}:;" < ${srcdir}/xml-i18n-extract.in > xml-i18n-extract;
+chmod ugo+x xml-i18n-extract;
+chmod u+w xml-i18n-extract;
+
+sed -e "s:@XML_I18N_TOOLS_PERL@:${XML_I18N_TOOLS_PERL}:;" < ${srcdir}/xml-i18n-merge.in > xml-i18n-merge;
+chmod ugo+x xml-i18n-merge;
+chmod u+w xml-i18n-merge;
+
+sed -e "s:@XML_I18N_TOOLS_PERL@:${XML_I18N_TOOLS_PERL}:;" < ${srcdir}/xml-i18n-update.in > xml-i18n-update;
+chmod ugo+x xml-i18n-update;
+chmod u+w xml-i18n-update;
+], XML_I18N_TOOLS_PERL=${XML_I18N_TOOLS_PERL})
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+dnl old names
+AC_DEFUN(AM_PROG_XML_I18N_TOOLS, [indir([AC_PROG_XML_I18N_TOOLS])])dnl
+
+# gnome-common.m4
+#
+# This only for packages that are not in the GNOME CVS tree.
+
+dnl GNOME_COMMON_INIT
+
+AC_DEFUN([GNOME_COMMON_INIT],
+[
+ GNOME_ACLOCAL_DIR="$GNOME_COMMON_MACROS_DIR"
+ AC_SUBST(GNOME_ACLOCAL_DIR)
+
+ ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"
+])
+
+
+dnl
+dnl GNOME_INIT_HOOK (script-if-gnome-enabled, [failflag], [additional-inits])
+dnl
+dnl if failflag is "fail" then GNOME_INIT_HOOK will abort if gnomeConf.sh
+dnl is not found.
+dnl
+
+AC_DEFUN([GNOME_INIT_HOOK],[
+ AC_SUBST(GNOME_LIBS)
+ AC_SUBST(GNOMEUI_LIBS)
+ AC_SUBST(GNOMEGNORBA_LIBS)
+ AC_SUBST(GTKXMHTML_LIBS)
+ AC_SUBST(ZVT_LIBS)
+ AC_SUBST(GNOME_LIBDIR)
+ AC_SUBST(GNOME_INCLUDEDIR)
+
+ AC_ARG_WITH(gnome-includes,
+ [ --with-gnome-includes Specify location of GNOME headers],[
+ CFLAGS="$CFLAGS -I$withval"
+ ])
+
+ AC_ARG_WITH(gnome-libs,
+ [ --with-gnome-libs Specify location of GNOME libs],[
+ LDFLAGS="$LDFLAGS -L$withval"
+ gnome_prefix=$withval
+ ])
+
+ AC_ARG_WITH(gnome,
+ [ --with-gnome Specify prefix for GNOME files],
+ if test x$withval = xyes; then
+ want_gnome=yes
+ dnl Note that an empty true branch is not
+ dnl valid sh syntax.
+ ifelse([$1], [], :, [$1])
+ else
+ if test "x$withval" = xno; then
+ want_gnome=no
+ else
+ want_gnome=yes
+ LDFLAGS="$LDFLAGS -L$withval/lib"
+ CFLAGS="$CFLAGS -I$withval/include"
+ gnome_prefix=$withval/lib
+ fi
+ fi,
+ want_gnome=yes)
+
+ if test "x$want_gnome" = xyes; then
+
+ AC_PATH_PROG(GNOME_CONFIG,gnome-config,no)
+ if test "$GNOME_CONFIG" = "no"; then
+ no_gnome_config="yes"
+ else
+ AC_MSG_CHECKING(if $GNOME_CONFIG works)
+ if $GNOME_CONFIG --libs-only-l gnome >/dev/null 2>&1; then
+ AC_MSG_RESULT(yes)
+ GNOME_GNORBA_HOOK([],$2)
+ GNOME_LIBS="`$GNOME_CONFIG --libs-only-l gnome`"
+ GNOMEUI_LIBS="`$GNOME_CONFIG --libs-only-l gnomeui`"
+ GNOMEGNORBA_LIBS="`$GNOME_CONFIG --libs-only-l gnorba gnomeui`"
+ GTKXMHTML_LIBS="`$GNOME_CONFIG --libs-only-l gtkxmhtml`"
+ ZVT_LIBS="`$GNOME_CONFIG --libs-only-l zvt`"
+ GNOME_LIBDIR="`$GNOME_CONFIG --libs-only-L gnorba gnomeui`"
+ GNOME_INCLUDEDIR="`$GNOME_CONFIG --cflags gnorba gnomeui`"
+ $1
+ else
+ AC_MSG_RESULT(no)
+ no_gnome_config="yes"
+ fi
+ fi
+
+ if test x$exec_prefix = xNONE; then
+ if test x$prefix = xNONE; then
+ gnome_prefix=$ac_default_prefix/lib
+ else
+ gnome_prefix=$prefix/lib
+ fi
+ else
+ gnome_prefix=`eval echo \`echo $libdir\``
+ fi
+
+ if test "$no_gnome_config" = "yes"; then
+ AC_MSG_CHECKING(for gnomeConf.sh file in $gnome_prefix)
+ if test -f $gnome_prefix/gnomeConf.sh; then
+ AC_MSG_RESULT(found)
+ echo "loading gnome configuration from" \
+ "$gnome_prefix/gnomeConf.sh"
+ . $gnome_prefix/gnomeConf.sh
+ $1
+ else
+ AC_MSG_RESULT(not found)
+ if test x$2 = xfail; then
+ AC_MSG_ERROR(Could not find the gnomeConf.sh file that is generated by gnome-libs install)
+ fi
+ fi
+ fi
+ fi
+
+ if test -n "$3"; then
+ n="$3"
+ for i in $n; do
+ AC_MSG_CHECKING(extra library \"$i\")
+ case $i in
+ applets)
+ AC_SUBST(GNOME_APPLETS_LIBS)
+ GNOME_APPLETS_LIBS=`$GNOME_CONFIG --libs-only-l applets`
+ AC_MSG_RESULT($GNOME_APPLETS_LIBS);;
+ docklets)
+ AC_SUBST(GNOME_DOCKLETS_LIBS)
+ GNOME_DOCKLETS_LIBS=`$GNOME_CONFIG --libs-only-l docklets`
+ AC_MSG_RESULT($GNOME_DOCKLETS_LIBS);;
+ capplet)
+ AC_SUBST(GNOME_CAPPLET_LIBS)
+ GNOME_CAPPLET_LIBS=`$GNOME_CONFIG --libs-only-l capplet`
+ AC_MSG_RESULT($GNOME_CAPPLET_LIBS);;
+ *)
+ AC_MSG_RESULT(unknown library)
+ esac
+ done
+ fi
+])
+
+dnl
+dnl GNOME_INIT ([additional-inits])
+dnl
+
+AC_DEFUN([GNOME_INIT],[
+ GNOME_INIT_HOOK([],fail,$1)
+])
+
+dnl
+dnl GNOME_GNORBA_HOOK (script-if-gnorba-found, failflag)
+dnl
+dnl if failflag is "failure" it aborts if gnorba is not found.
+dnl
+
+AC_DEFUN([GNOME_GNORBA_HOOK],[
+ GNOME_ORBIT_HOOK([],$2)
+ AC_CACHE_CHECK([for gnorba libraries],gnome_cv_gnorba_found,[
+ gnome_cv_gnorba_found=no
+ if test x$gnome_cv_orbit_found = xyes; then
+ GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
+ GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
+ if test -n "$GNORBA_LIBS"; then
+ gnome_cv_gnorba_found=yes
+ fi
+ fi
+ ])
+ AM_CONDITIONAL(HAVE_GNORBA, test x$gnome_cv_gnorba_found = xyes)
+ if test x$gnome_cv_orbit_found = xyes; then
+ $1
+ GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
+ GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
+ AC_SUBST(GNORBA_CFLAGS)
+ AC_SUBST(GNORBA_LIBS)
+ else
+ if test x$2 = xfailure; then
+ AC_MSG_ERROR(gnorba library not installed or installation problem)
+ fi
+ fi
+])
+
+AC_DEFUN([GNOME_GNORBA_CHECK], [
+ GNOME_GNORBA_HOOK([],failure)
+])
+
+dnl
+dnl GNOME_ORBIT_HOOK (script-if-orbit-found, failflag)
+dnl
+dnl if failflag is "failure" it aborts if orbit is not found.
+dnl
+
+AC_DEFUN([GNOME_ORBIT_HOOK],[
+ AC_PATH_PROG(ORBIT_CONFIG,orbit-config,no)
+ AC_PATH_PROG(ORBIT_IDL,orbit-idl,no)
+ AC_CACHE_CHECK([for working ORBit environment],gnome_cv_orbit_found,[
+ if test x$ORBIT_CONFIG = xno -o x$ORBIT_IDL = xno; then
+ gnome_cv_orbit_found=no
+ else
+ gnome_cv_orbit_found=yes
+ fi
+ ])
+ AM_CONDITIONAL(HAVE_ORBIT, test x$gnome_cv_orbit_found = xyes)
+ if test x$gnome_cv_orbit_found = xyes; then
+ $1
+ ORBIT_CFLAGS=`orbit-config --cflags client server`
+ ORBIT_LIBS=`orbit-config --use-service=name --libs client server`
+ AC_SUBST(ORBIT_CFLAGS)
+ AC_SUBST(ORBIT_LIBS)
+ else
+ if test x$2 = xfailure; then
+ AC_MSG_ERROR(ORBit not installed or installation problem)
+ fi
+ fi
+])
+
+AC_DEFUN([GNOME_ORBIT_CHECK], [
+ GNOME_ORBIT_HOOK([],failure)
+])
+
+#serial 1
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
+
+
+# serial 1
+
+# @defmac AC_PROG_CC_STDC
+# @maindex PROG_CC_STDC
+# @ovindex CC
+# If the C compiler in not in ANSI C mode by default, try to add an option
+# to output variable @code{CC} to make it so. This macro tries various
+# options that select ANSI C on some system or another. It considers the
+# compiler to be in ANSI C mode if it handles function prototypes correctly.
+#
+# If you use this macro, you should check after calling it whether the C
+# compiler has been set to accept ANSI C; if not, the shell variable
+# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source
+# code in ANSI C, you can make an un-ANSIfied copy of it by using the
+# program @code{ansi2knr}, which comes with Ghostscript.
+# @end defmac
+
+AC_DEFUN([AM_PROG_CC_STDC],
+[AC_REQUIRE([AC_PROG_CC])
+AC_BEFORE([$0], [AC_C_INLINE])
+AC_BEFORE([$0], [AC_C_CONST])
+dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require
+dnl a magic option to avoid problems with ANSI preprocessor commands
+dnl like #elif.
+dnl FIXME: can't do this because then AC_AIX won't work due to a
+dnl circular dependency.
+dnl AC_BEFORE([$0], [AC_PROG_CPP])
+AC_MSG_CHECKING([for ${CC-cc} option to accept ANSI C])
+AC_CACHE_VAL(am_cv_prog_cc_stdc,
+[am_cv_prog_cc_stdc=no
+ac_save_CC="$CC"
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ AC_TRY_COMPILE(
+[#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+], [
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+],
+[am_cv_prog_cc_stdc="$ac_arg"; break])
+done
+CC="$ac_save_CC"
+])
+if test -z "$am_cv_prog_cc_stdc"; then
+ AC_MSG_RESULT([none needed])
+else
+ AC_MSG_RESULT([$am_cv_prog_cc_stdc])
+fi
+case "x$am_cv_prog_cc_stdc" in
+ x|xno) ;;
+ *) CC="$CC $am_cv_prog_cc_stdc" ;;
+esac
+])
+
+dnl GNOME_COMPILE_WARNINGS
+dnl Turn on many useful compiler warnings
+dnl For now, only works on GCC
+AC_DEFUN([GNOME_COMPILE_WARNINGS],[
+ AC_ARG_ENABLE(compile-warnings,
+ [ --enable-compile-warnings=[no/minimum/yes] Turn on compiler warnings.],,enable_compile_warnings=minimum)
+
+ AC_MSG_CHECKING(what warning flags to pass to the C compiler)
+ warnCFLAGS=
+ if test "x$GCC" != xyes; then
+ enable_compile_warnings=no
+ fi
+
+ if test "x$enable_compile_warnings" != "xno"; then
+ if test "x$GCC" = "xyes"; then
+ case " $CFLAGS " in
+ *[\ \ ]-Wall[\ \ ]*) ;;
+ *) warnCFLAGS="-Wall -Wunused" ;;
+ esac
+
+ ## -W is not all that useful. And it cannot be controlled
+ ## with individual -Wno-xxx flags, unlike -Wall
+ if test "x$enable_compile_warnings" = "xyes"; then
+ warnCFLAGS="$warnCFLAGS -Wmissing-prototypes -Wmissing-declarations"
+ fi
+ fi
+ fi
+ AC_MSG_RESULT($warnCFLAGS)
+
+ AC_ARG_ENABLE(iso-c,
+ [ --enable-iso-c Try to warn if code is not ISO C ],,
+ enable_iso_c=no)
+
+ AC_MSG_CHECKING(what language compliance flags to pass to the C compiler)
+ complCFLAGS=
+ if test "x$enable_iso_c" != "xno"; then
+ if test "x$GCC" = "xyes"; then
+ case " $CFLAGS " in
+ *[\ \ ]-ansi[\ \ ]*) ;;
+ *) complCFLAGS="$complCFLAGS -ansi" ;;
+ esac
+
+ case " $CFLAGS " in
+ *[\ \ ]-pedantic[\ \ ]*) ;;
+ *) complCFLAGS="$complCFLAGS -pedantic" ;;
+ esac
+ fi
+ fi
+ AC_MSG_RESULT($complCFLAGS)
+ if test "x$cflags_set" != "xyes"; then
+ CFLAGS="$CFLAGS $warnCFLAGS $complCFLAGS"
+ cflags_set=yes
+ AC_SUBST(cflags_set)
+ fi
+])
+
+dnl For C++, do basically the same thing.
+
+AC_DEFUN([GNOME_CXX_WARNINGS],[
+ AC_ARG_ENABLE(cxx-warnings,
+ [ --enable-cxx-warnings=[no/minimum/yes] Turn on compiler warnings.],,enable_cxx_warnings=minimum)
+
+ AC_MSG_CHECKING(what warning flags to pass to the C++ compiler)
+ warnCXXFLAGS=
+ if test "x$GCC" != xyes; then
+ enable_compile_warnings=no
+ fi
+ if test "x$enable_cxx_warnings" != "xno"; then
+ if test "x$GCC" = "xyes"; then
+ case " $CXXFLAGS " in
+ *[\ \ ]-Wall[\ \ ]*) ;;
+ *) warnCXXFLAGS="-Wall -Wno-unused" ;;
+ esac
+
+ ## -W is not all that useful. And it cannot be controlled
+ ## with individual -Wno-xxx flags, unlike -Wall
+ if test "x$enable_cxx_warnings" = "xyes"; then
+ warnCXXFLAGS="$warnCXXFLAGS -Wmissing-prototypes -Wmissing-declarations -Wshadow -Woverloaded-virtual"
+ fi
+ fi
+ fi
+ AC_MSG_RESULT($warnCXXFLAGS)
+
+ AC_ARG_ENABLE(iso-cxx,
+ [ --enable-iso-cxx Try to warn if code is not ISO C++ ],,
+ enable_iso_cxx=no)
+
+ AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler)
+ complCXXFLAGS=
+ if test "x$enable_iso_cxx" != "xno"; then
+ if test "x$GCC" = "xyes"; then
+ case " $CXXFLAGS " in
+ *[\ \ ]-ansi[\ \ ]*) ;;
+ *) complCXXFLAGS="$complCXXFLAGS -ansi" ;;
+ esac
+
+ case " $CXXFLAGS " in
+ *[\ \ ]-pedantic[\ \ ]*) ;;
+ *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;;
+ esac
+ fi
+ fi
+ AC_MSG_RESULT($complCXXFLAGS)
+ if test "x$cxxflags_set" != "xyes"; then
+ CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS"
+ cxxflags_set=yes
+ AC_SUBST(cxxflags_set)
+ fi
+])
+
+dnl GNOME_X_CHECKS
+dnl
+dnl Basic X11 related checks for X11. At the end, the following will be
+dnl defined/changed:
+dnl GTK_{CFLAGS,LIBS} From AM_PATH_GTK
+dnl CPPFLAGS Will include $X_CFLAGS
+dnl GNOME_HAVE_SM `true' or `false' depending on whether session
+dnl management is available. It is available if
+dnl both -lSM and X11/SM/SMlib.h exist. (Some
+dnl Solaris boxes have the library but not the header)
+dnl XPM_LIBS -lXpm if Xpm library is present, otherwise ""
+dnl
+dnl The following configure cache variables are defined (but not used):
+dnl gnome_cv_passdown_{x_libs,X_LIBS,X_CFLAGS}
+dnl
+AC_DEFUN([GNOME_X_CHECKS],
+[
+ AM_PATH_GTK(1.2.0,,AC_MSG_ERROR(GTK not installed, or gtk-config not in path))
+ dnl Hope that GTK_CFLAGS have only -I and -D. Otherwise, we could
+ dnl test -z "$x_includes" || CPPFLAGS="$CPPFLAGS -I$x_includes"
+ dnl
+ dnl Use CPPFLAGS instead of CFLAGS because AC_CHECK_HEADERS uses
+ dnl CPPFLAGS, not CFLAGS
+ CPPFLAGS="$CPPFLAGS $GTK_CFLAGS"
+
+ saved_ldflags="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $GTK_LIBS"
+
+ gnome_cv_passdown_x_libs="$GTK_LIBS"
+ gnome_cv_passdown_X_LIBS="$GTK_LIBS"
+ gnome_cv_passdown_X_CFLAGS="$GTK_CFLAGS"
+ gnome_cv_passdown_GTK_LIBS="$GTK_LIBS"
+
+ LDFLAGS="$saved_ldflags $GTK_LIBS"
+
+dnl We are requiring GTK >= 1.1.1, which means this will be fine anyhow.
+ USE_DEVGTK=true
+
+dnl AC_MSG_CHECKING([whether to use features from (unstable) GTK+ 1.1.x])
+dnl AC_EGREP_CPP(answer_affirmatively,
+dnl [#include <gtk/gtkfeatures.h>
+dnl #ifdef GTK_HAVE_FEATURES_1_1_0
+dnl answer_affirmatively
+dnl #endif
+dnl ], dev_gtk=yes, dev_gtk=no)
+dnl if test "$dev_gtk" = "yes"; then
+dnl USE_DEVGTK=true
+dnl fi
+dnl AC_MSG_RESULT("$dev_gtk")
+
+ GNOME_HAVE_SM=true
+ case "$GTK_LIBS" in
+ *-lSM*)
+ dnl Already found it.
+ ;;
+ *)
+ dnl Assume that if we have -lSM then we also have -lICE.
+ AC_CHECK_LIB(SM, SmcSaveYourselfDone,
+ [GTK_LIBS="-lSM -lICE $GTK_LIBS"],GNOME_HAVE_SM=false,
+ $x_libs -lICE)
+ ;;
+ esac
+
+ if test "$GNOME_HAVE_SM" = true; then
+ AC_CHECK_HEADERS(X11/SM/SMlib.h,,GNOME_HAVE_SM=false)
+ fi
+
+ if test "$GNOME_HAVE_SM" = true; then
+ AC_DEFINE(HAVE_LIBSM)
+ fi
+
+ XPM_LIBS=""
+ AC_CHECK_LIB(Xpm, XpmFreeXpmImage, [XPM_LIBS="-lXpm"], , $x_libs)
+ AC_SUBST(XPM_LIBS)
+
+ AC_REQUIRE([GNOME_PTHREAD_CHECK])
+ LDFLAGS="$saved_ldflags"
+
+ AC_PROVIDE([GNOME_X_CHECKS])
+])
+
+# Configure paths for GTK+
+# Owen Taylor 97-11-3
+
+dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
+dnl
+AC_DEFUN(AM_PATH_GTK,
+[dnl
+dnl Get the cflags and libraries from the gtk-config script
+dnl
+AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
+ gtk_config_prefix="$withval", gtk_config_prefix="")
+AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
+ gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
+AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
+ , enable_gtktest=yes)
+
+ for module in . $4
+ do
+ case "$module" in
+ gthread)
+ gtk_config_args="$gtk_config_args gthread"
+ ;;
+ esac
+ done
+
+ if test x$gtk_config_exec_prefix != x ; then
+ gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
+ fi
+ fi
+ if test x$gtk_config_prefix != x ; then
+ gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
+ fi
+ fi
+
+ AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
+ min_gtk_version=ifelse([$1], ,0.99.7,$1)
+ AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
+ no_gtk=""
+ if test "$GTK_CONFIG" = "no" ; then
+ no_gtk=yes
+ else
+ GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
+ GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
+ gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+ gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+ gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+ if test "x$enable_gtktest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$GTK_LIBS $LIBS"
+dnl
+dnl Now check if the installed GTK is sufficiently new. (Also sanity
+dnl checks the results of gtk-config to some extent
+dnl
+ rm -f conf.gtktest
+ AC_TRY_RUN([
+#include <gtk/gtk.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.gtktest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = g_strdup("$min_gtk_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gtk_version");
+ exit(1);
+ }
+
+ if ((gtk_major_version != $gtk_config_major_version) ||
+ (gtk_minor_version != $gtk_config_minor_version) ||
+ (gtk_micro_version != $gtk_config_micro_version))
+ {
+ printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+ $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf ("*** was found! If gtk-config was correct, then it is best\n");
+ printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
+ printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
+ printf("*** before re-running configure\n");
+ }
+#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
+ else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
+ (gtk_minor_version != GTK_MINOR_VERSION) ||
+ (gtk_micro_version != GTK_MICRO_VERSION))
+ {
+ printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
+ GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+ printf("*** library (version %d.%d.%d)\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ }
+#endif /* defined (GTK_MAJOR_VERSION) ... */
+ else
+ {
+ if ((gtk_major_version > major) ||
+ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
+ major, minor, micro);
+ printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
+ printf("*** correct copy of gtk-config. (In this case, you will have to\n");
+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ }
+ }
+ return 1;
+}
+],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_gtk" = x ; then
+ AC_MSG_RESULT(yes)
+ ifelse([$2], , :, [$2])
+ else
+ AC_MSG_RESULT(no)
+ if test "$GTK_CONFIG" = "no" ; then
+ echo "*** The gtk-config script installed by GTK could not be found"
+ echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the GTK_CONFIG environment variable to the"
+ echo "*** full path to gtk-config."
+ else
+ if test -f conf.gtktest ; then
+ :
+ else
+ echo "*** Could not run GTK test program, checking why..."
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$LIBS $GTK_LIBS"
+ AC_TRY_LINK([
+#include <gtk/gtk.h>
+#include <stdio.h>
+], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
+ [ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding GTK or finding the wrong"
+ echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+ echo "***"
+ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
+ echo "*** came with the system with the command"
+ echo "***"
+ echo "*** rpm --erase --nodeps gtk gtk-devel" ],
+ [ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means GTK was incorrectly installed"
+ echo "*** or that you have moved GTK since it was installed. In the latter case, you"
+ echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GTK_CFLAGS=""
+ GTK_LIBS=""
+ ifelse([$3], , :, [$3])
+ fi
+ AC_SUBST(GTK_CFLAGS)
+ AC_SUBST(GTK_LIBS)
+ rm -f conf.gtktest
+])
+
+dnl
+dnl And better, use gthreads instead...
+dnl
+
+AC_DEFUN([GNOME_PTHREAD_CHECK],[
+ PTHREAD_LIB=""
+ AC_CHECK_LIB(pthread, pthread_create, PTHREAD_LIB="-lpthread",
+ [AC_CHECK_LIB(pthreads, pthread_create, PTHREAD_LIB="-lpthreads",
+ [AC_CHECK_LIB(c_r, pthread_create, PTHREAD_LIB="-lc_r",
+ [AC_CHECK_FUNC(pthread_create)]
+ )]
+ )]
+ )
+ AC_SUBST(PTHREAD_LIB)
+ AC_PROVIDE([GNOME_PTHREAD_CHECK])
+])
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+
+# serial 10
+
+dnl Usage: AM_WITH_NLS([TOOLSYMBOL], [NEEDSYMBOL], [LIBDIR]).
+dnl If TOOLSYMBOL is specified and is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). Otherwise, a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored.
+dnl LIBDIR is used to find the intl libraries. If empty,
+dnl the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_WITH_NLS],
+ [AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+ INTLLIBS=
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ AC_DEFINE(ENABLE_NLS, 1,
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
+ CATOBJEXT=NONE
+
+ dnl Add a version number to the cache macros.
+ define(gt_cv_func_gnugettext_libc, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libc])
+ define(gt_cv_func_gnugettext_libintl, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libintl])
+
+ AC_CHECK_HEADER(libintl.h,
+ [AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
+ [AC_TRY_LINK([#include <libintl.h>
+extern int _nl_msg_cat_cntr;],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
+ gt_cv_func_gnugettext_libc=yes,
+ gt_cv_func_gnugettext_libc=no)])
+
+ if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ gt_cv_func_gnugettext_libintl,
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -lintl $LIBICONV"
+ AC_TRY_LINK([#include <libintl.h>
+extern int _nl_msg_cat_cntr;],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
+ gt_cv_func_gnugettext_libintl=yes,
+ gt_cv_func_gnugettext_libintl=no)
+ LIBS="$gt_save_LIBS"])
+ fi
+
+ dnl If an already present or preinstalled GNU gettext() is found,
+ dnl use it. But if this macro is used in GNU gettext, and GNU
+ dnl gettext is already preinstalled in libintl, we update this
+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
+ if test "$gt_cv_func_gnugettext_libc" = "yes" \
+ || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
+ && test "$PACKAGE" != gettext; }; then
+ AC_DEFINE(HAVE_GETTEXT, 1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ dnl If iconv() is in a separate libiconv library, then anyone
+ dnl linking with libintl{.a,.so} also needs to link with
+ dnl libiconv.
+ INTLLIBS="-lintl $LIBICONV"
+ fi
+
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $INTLLIBS"
+ AC_CHECK_FUNCS(dcgettext)
+ LIBS="$gt_save_LIBS"
+
+ dnl Search for GNU msgfmt in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ dnl Search for GNU xgettext in the PATH.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
+
+ CATOBJEXT=.gmo
+ fi
+ ])
+
+ if test "$CATOBJEXT" = "NONE"; then
+ dnl GNU gettext is not found in the C library.
+ dnl Fall back on GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ INTLOBJS="\$(GETTOBJS)"
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
+ AC_SUBST(MSGFMT)
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ CATOBJEXT=.gmo
+ INTLLIBS="ifelse([$3],[],\$(top_builddir)/intl,[$3])/libintl.ifelse([$1], use-libtool, [l], [])a $LIBICONV"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU msgfmt.
+ if test "$GMSGFMT" != ":"; then
+ dnl If it is no GNU msgfmt we define it as : so that the
+ dnl Makefiles still can work.
+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found msgfmt program is not GNU msgfmt; ignore it])
+ GMSGFMT=":"
+ fi
+ fi
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header /dev/null >/dev/null 2>&1; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext program is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ fi
+
+ dnl We need to process the po/ directory.
+ POSUB=po
+ fi
+ AC_OUTPUT_COMMANDS(
+ [for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," -e "\$s/\(.*\) \\\\/\1/" < "$ac_given_srcdir/$ac_dir/POTFILES.in" > "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/POTFILES =/r $ac_dir/POTFILES" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ fi
+ ;;
+ esac
+ done])
+
+
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
+ if test "$PACKAGE" = gettext; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+ dnl because plural.y uses bison specific features. It requires at least
+ dnl bison-1.26 because earlier versions generate a plural.c that doesn't
+ dnl compile.
+ dnl bison is only needed for the maintainer (who touches plural.y). But in
+ dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+ dnl the rule in general Makefile. Now, some people carelessly touch the
+ dnl files or have a broken "make" program, hence the plural.c rule will
+ dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+ dnl present or too old.
+ AC_CHECK_PROGS([INTLBISON], [bison])
+ if test -z "$INTLBISON"; then
+ ac_verc_fail=yes
+ else
+ dnl Found it, now check the version.
+ AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+ ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison .* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+ case $ac_prog_version in
+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+ 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+changequote([,])dnl
+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+ esac
+ AC_MSG_RESULT([$ac_prog_version])
+ fi
+ if test $ac_verc_fail = yes; then
+ INTLBISON=:
+ fi
+
+ dnl These rules are solely for the distribution goal. While doing this
+ dnl we only have to keep exactly one list of the available catalogs
+ dnl in configure.in.
+ for lang in $ALL_LINGUAS; do
+ GMOFILES="$GMOFILES $lang.gmo"
+ POFILES="$POFILES $lang.po"
+ done
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATALOGS)
+ AC_SUBST(CATOBJEXT)
+ AC_SUBST(GMOFILES)
+ AC_SUBST(INTLLIBS)
+ AC_SUBST(INTLOBJS)
+ AC_SUBST(POFILES)
+ AC_SUBST(POSUB)
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST(DATADIRNAME)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INSTOBJEXT=.mo
+ AC_SUBST(INSTOBJEXT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ GENCAT=gencat
+ AC_SUBST(GENCAT)
+ ])
+
+dnl Usage: Just like AM_WITH_NLS, which see.
+AC_DEFUN([AM_GNU_GETTEXT],
+ [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_ISC_POSIX])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_C_CONST])dnl
+ AC_REQUIRE([AC_C_INLINE])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+ AC_REQUIRE([jm_GLIBC21])dnl
+
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h])
+ AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getcwd getegid geteuid \
+getgid getuid mempcpy munmap putenv setenv setlocale stpcpy strchr strcasecmp \
+strdup strtoul tsearch __argz_count __argz_stringify __argz_next])
+
+ AM_ICONV
+ AM_LANGINFO_CODESET
+ AM_LC_MESSAGES
+ AM_WITH_NLS([$1],[$2],[$3])
+
+ if test "x$CATOBJEXT" != "x"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ AC_MSG_CHECKING(for catalogs to be installed)
+ NEW_LINGUAS=
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ NEW_LINGUAS="$NEW_LINGUAS $presentlang"
+ fi
+ done
+ LINGUAS=$NEW_LINGUAS
+ AC_MSG_RESULT($LINGUAS)
+ fi
+
+ dnl Construct list of names of catalog files to be constructed.
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+ dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
+ dnl Try to locate is.
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
+ AC_SUBST(MKINSTALLDIRS)
+
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=ifelse([$1], use-libtool, [l], [])
+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
+ ])
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+
+# serial 2
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+#serial 2
+
+# Test for the GNU C Library, version 2.1 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([jm_GLIBC21],
+ [
+ AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
+ ac_cv_gnu_library_2_1,
+ [AC_EGREP_CPP([Lucky GNU user],
+ [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+ Lucky GNU user
+ #endif
+#endif
+ ],
+ ac_cv_gnu_library_2_1=yes,
+ ac_cv_gnu_library_2_1=no)
+ ]
+ )
+ AC_SUBST(GLIBC21)
+ GLIBC21="$ac_cv_gnu_library_2_1"
+ ]
+)
+
+#serial AM2
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+
+ AC_ARG_WITH([libiconv-prefix],
+[ --with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib], [
+ for dir in `echo "$withval" | tr : ' '`; do
+ if test -d $dir/include; then CPPFLAGS="$CPPFLAGS -I$dir/include"; fi
+ if test -d $dir/lib; then LDFLAGS="$LDFLAGS -L$dir/lib"; fi
+ done
+ ])
+
+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_func_iconv=yes)
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS -liconv"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL(am_cv_proto_iconv, [
+ AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([$]{ac_t:-
+ }[$]am_cv_proto_iconv)
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+ LIBICONV=
+ if test "$am_cv_lib_iconv" = yes; then
+ LIBICONV="-liconv"
+ fi
+ AC_SUBST(LIBICONV)
+])
+
+#serial AM1
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+ AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
+ [AC_TRY_LINK([#include <langinfo.h>],
+ [char* cs = nl_langinfo(CODESET);],
+ am_cv_langinfo_codeset=yes,
+ am_cv_langinfo_codeset=no)
+ ])
+ if test $am_cv_langinfo_codeset = yes; then
+ AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
+ [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
+ fi
+])
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+
+# serial 2
+
+AC_DEFUN([AM_LC_MESSAGES],
+ [if test $ac_cv_header_locale_h = yes; then
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your <locale.h> file defines LC_MESSAGES.])
+ fi
+ fi])
+