-TODO/bugs In SILC Client Library
-================================
+TODO/bugs in Irssi SILC client
+==============================
+
+ o Add local command to switch the channel's private key when channel has
+ several private keys. Currently sending channel messages with many
+ keys is not possible because changing the key is not possible by the
+ user.
- o The client library must manage somehow when receiving client that has
- same nickname, same server, same username but different Client ID than
- what we have in the cache. It is now assumed that they are different
- client but it might not be. It should at least number the clients
- using the client->num so that they can be accessed from the user
- interface separately or it could just remove the old client unless
- it is on some channels.
+ o JOINing to +a (requires passphrase to JOIN) does not work on autojoin.
+ Seems the passwords in the .silc/config has no effect.
o Add local commands to list the current server and client public keys
that the user has. And a local command to dump the contents of the
- public key to the screen.
+ public key to the screen. Something like LISTKEYS, SHOWKEY...
+
+ o The QUIT command should wait for server's disconnection (at least for
+ a while) before exiting the application.
+
+ o The JOIN command's HELP is generated from Irssi IRCs JOIN help and
+ the syntax is not same in SILC. This must be fixed. Most likely
+ we must forget the Irssi's JOIN command and mimic it to get our
+ required syntax for it too.
- o Add client library parameters or options that handle what kind of
- messages the library should print out (using `say' client operation,
- for example) and what is left for the application to print. The
- appliation could for example set that it handles all command printing
- but all error printing should be handled by the library, etc...
- This is not a showstopper.
+ o We should get rid of the clientconfig.[ch] in Irssi SILC and move the
+ cipher, hash, hmac and pkcs configuration to the Irssi SILC's config
+ file.
- o Input line on UI is buggy. Cursor movement etc bugs. Too lazy to
- fix it.
+ o Add PERL scripting support from Irssi CVS.
+
+ o Extend the /HELP command to support sub commands or something. So
+ that user can say /help set mutual_authentication they would get
+ help of the mutual_authentication setting.
+
+ o Set different kind of settings, like, /set mutual_authentication,
+ /set key_exchange_timeout, /set conn_auth_timeout etc etc.
+
+
+TODO/bugs In SILC Client Library
+================================
+
+ o JOIN command's argument handling is buggy. See the XXX in the code.
TODO/bugs In SILC Server
========================
- o The SKE protocol in the server does not verify the remote hosts
- (the router's) public key at all. All public keys are accepted without
- verification - this obviously is not secure.
-
- o When server quits and all clients of that server are removed from all
- channels the channel keys are re-generated for all clients. This is
- a bug and should be done only once per channel after all clients of
- the server has been removed.
+ o On normal server the channel count can go negative (like -3 channels).
+
+ o Change the sever to connect to another server from low ports (706)
+ and not from high ports. Currently we cannot do incoming connection
+ checking by remote port because the port is not fixed.
+
+ o Add a timeout to handling incoming JOIN commands. It should be
+ enforced that JOIN command is executed only once in a second or two
+ seconds. Now it is possible to accept n incoming JOIN commands
+ and process them without any timeouts. THis must be employed because
+ each JOIN command will create and distribute the new channel key
+ to everybody on the channel.
+
+ o Optimize the JOIN command in normal server. When router returns
+ command reply for JOIN it returns the new channel key. We however
+ still create new channel key when processing the pending JOIN command.
+ This works ok but is not necessary.
+
+ o Optimize the WHOIS and IDENTIFY commands to somehow check whether the
+ requested clients are on some channel that the server knows about. If
+ this is the case then the request is not needed to be forwarded to the
+ router. One specific optimization could be done with JOIN command.
+ If the previous command to the WHOIS and IDENTIFY commands are JOIN
+ command (from the client) it can be expected (though it must be
+ verified) that the client is resolving the users on the channel it just
+ joined. If server has done this once there is really no reason to
+ resolve it twice (from the router), it can reply directly back with
+ the information it knows. This is because the server would (will)
+ receive notifications from the router for users that are on a local
+ channel.
+
+ The same is with whowas command. Actually with all these commands
+ it should be checked also whether the requested information is local.
+ If it is, there is no reason to send it to the router, since the server
+ knows it best.
+
+ o Add support for sending the LIST command to primary router on normal
+ server to receive all the created channels. Currently the command
+ returns only the channels the server knows about. The protocol spec
+ does not prohibit of sending the LIST to the router.
o Incomplete IPv6 support:
- o silc_server_get_users_on_channel does not support IPv6 based
- Client ID's.
- o silc_server_route_get and the route code in general supports
- only IPv4.
o silcd/serverid.c and its routines supports only IPv4.
- o DNS/IP lookup blocks the server. This must be fixed. Check the
- resolver stuff (resolver(3), resolver(5)). Either we have to do the
- own resolver stuff (through scheduler, if possible without writing
- too much own stuff) or use threads.
-
- o The backup router support described in the protocol specification
- should be done at some point.
+ o Add perhaps /var/run/silcd.pid for PID information for the server.
o New configuration file format must be added. The new one will be
done using the dotconf config library (lib/dotconf). The following
TODO/bugs In SILC Libraries
===========================
- o Incomplete IPv6 support:
-
- o All network routines in lib/silcutil/silcnet.[ch] does not
- support IPv6.
- o silc_id_render supports only IPv4 based ID's in the file
- lib/silcutil/silcutil.c.
+ o Security fixes from the latest draft for MAC key and MAC computation:
+ the packet sequence number.
o Compression routines are missing. The protocol supports packet
compression thus it must be implemented. SILC Comp API must be
not in distribution), but it is not used yet, and it requires some
tweaking on the Makefiles (we want static lib not shared).
- o The CAST cipher is not compiled currently due to compilation errors;
- check those. Cast is in lib/silccrypt/cast.c.
-
o All payload parsing (decoding) functions should take unsigned char *
and uint32 as data and data length as arguments. Now some of the
routines do already that but most of the routines use SilcBuffer.
The SilcBuffer ones should be removed since buf->data and buf->len
- is more convenient to use. However, the silc_buffer_[un]format
- routines support only SilcBuffer so they would require reallocation
- of SilcBuffer. Maybe support for raw data (and not just SilcBuffer)
- should be added silc_buffer_[un]format_? routines. These are currently
- only cosmetic changes but at some point must be done to make the
- payload interfaces consistent.
+ is more convenient to use. These are currently only cosmetic changes
+ but at some point must be done to make the payload interfaces
+ consistent.
+ o Incomplete IPv6 support:
-TODO After 1.0
-==============
+ o All network routines in lib/silcutil/silcnet.[ch] does not
+ support IPv6.
+ o silc_id_render supports only IPv4 based ID's in the file
+ lib/silcutil/silcutil.c.
+
+ o Add builtin SOCKS and HTTP Proxy support, well the SOCKS at least.
+ SILC currently supports SOCKS4 and SOCKS5 but it needs to be compiled
+ in separately.
- o Pthreads support. A lot of problems are solved with server (and with
- client as well) if we add pthread support. We can forget things such
- as non-blocking connecting etc, and we can do things such as DNS/IP
- lookups async. The server itself also benefits great deal from
- threads, especially from performance point of view.
- But, this is not a small task and almost entire SILC Library has to
- be made re-entrant. Own API is probably added for the threads support
- to make changes in the future as painless as possible. So the API
- would have things like silc_mutex_lock, silc_mutex_unlock and
- friends...
+TODO/Bugs in native WIN32 support (libraries)
+=============================================
+
+ o silc_net_create_connection_async does not work the same way than on
+ Unix. Do it with threads on WIN32. The function works but is not
+ actually async currently.
+
+
+TODO In SILC Protocol
+=====================
+
+ o If channel founder mode is set and the invite mode is set on channel
+ then the founder should be added to the list automatically so that
+ if the founder signoff's it will be able join again to the invite only
+ channel wihtout being invited.
+
+
+TODO After 1.0
+==============
o X.509 certificate support. SILC protocol supports certificates and
it would be great to have support for them. This is a big task as
to start writing one myself. Anyhow, the OpenSSL X.509 lib should
be checked.
+ Other package that should be checked is the NSS's X509 library.
+
o SSH2 public keys support. Maybe - not really needed but could be
nice as SSH is widely used all over the place. SILC Protocol
supports SSH2 public keys.
projects / silc.git / blobdiff