updates.

[crypto.git] / doc / FAQ

   Frequently Asked Questions

   1. General Questions
        1.1 What is SILC?
        1.2 When was SILC Project started?
        1.3 Why SILC in the first place?
        1.4 What license covers the SILC release?
        1.5 Why SILC? Why not IRC3?
        1.6 What platforms SILC supports?
        1.7 How do you pronounce SILC?
        1.8 Where can I find more information?
        1.9 I would like to help out, what can I do?

   2. Protocol Questions
        2.1 What is the status of SILC protocol in the IETF?
        2.2 How much the SILC protocol is based on IRC?
        2.3 Why use SILC? Why not IRC with SSL?
        2.4 Can I talk from SILC network to IRC network?
        2.5 Does SILC support file transfer?
        2.6 Does SILC support DCC or alike?
        2.7 I am behind a firewall, can I use SILC?
        2.8 How secure SILC really is?
        2.9 Does SILC support instant messaging?
        2.10 Why SILC does not have LINKS command like in IRC?
        2.11 Why SILC does not have STATS command like in IRC?
        2.12 Is anyone outside a channel able to see the channel
   messages?
        2.13 How can I register my channel in SILC?
        2.14 Is it true that all messages are encrypted in SILC?
        2.15 Can server or SILC operator gain operator mode on a channel?
        2.16 Channel name doesn't have #-character or does it?
        2.17 I have suggestions to SILC Protocol, what can I do?

   3. Client Questions
        3.1 Where can I find SILC clients?
        3.2 Can I use SILC with IRC client and vice versa?
        3.3 The default theme sucks, where can I find a better one?
        3.4 How do I send a private message?
        3.5 How do I negotiate secret key with another user?
        3.6 How do I negotiate secret keys behind a NAT?
        3.7 How do I change channel modes?
        3.8 What does the founder mode on channel mean, and how do I set
   it?
        3.9 I am founder of invite only channel, how can I join the
   channel after I have left it?
        3.10 How can I op or deop somebody on channel?
        3.11 How do I set private key for channel, and what does that
   mean exactly?
        3.12 How do I transfer a file?
        3.13 How can I get other users public keys?
        3.14 How can I see the fingerprint of my public key?
        3.15 I gave WHOIS to a nick, and it returned multiple replies,
   why?
        3.16 Is there a command to see all linked servers?
        3.17 How do I list the users of a channel?
        3.18 What is the difference between OPER and SILCOPER commands?
        3.19 My Cygwin client crashes with message "Couldn't create
   //.silc directory"
        3.20 Why /join #silc and /join silc doesn't join the same
   channel?

   4. Server Questions
        4.1 Where can I find SILC servers?
        4.2 Can I run my own SILC server?
        4.3 What is the difference between SILC server and SILC router?
        4.4 Why server says permission denied to write to a log file?
        4.5 When I connect to to my server, it says "server does not
   support one of your proposed cipher", what is wrong?
        4.6 Why SILC server runs on privileged port 706?
        4.7 I see [Unknown] in the log file, what does it mean?
        4.8 How can I generate a new server key pair?

   5. Toolkit Questions
        5.1 What is SILC Toolkit?
        5.2 Is the SILC Toolkit Reference Manual Available?
        5.3 How do I compile the Toolkit on Unix?
        5.4 How do I compile the Toolkit on Win32?
        5.5 Does the Toolkit package include any sample code?

   1. General Questions

   Q: What is SILC?
   A: SILC (Secure Internet Live Conferencing) is a protocol which
   provides secure conferencing services in the Internet over insecure
   channel. SILC is IRC like although internally they are very different.
   Biggest similarity between SILC and IRC is that they both provide
   conferencing services and that SILC has almost same commands as IRC.
   Other than that they are nothing alike.

   Biggest differences are that SILC is secure what IRC is not in any
   way. The network model is also entirely different compared to IRC.

   Q: When was SILC Project started?
   A: The SILC development started in 1996 and early 1997. But, for
   various reasons it suspended many times until it finally got some wind
   under its wings in 1999. First public release was in summer 2000.

   Q: Why SILC in the first place?
   A: Simply for fun, nothing more. And actually for need back in the
   days when it was started. When SILC was first developed there really
   did not exist anything like this. SILC has been very interesting and
   educational project.

   Q: What license covers the SILC release?
   A: The SILC software developed here at silcnet.org, the SILC Client,
   the SILC Server and the SILC Toolkit are covered by the GNU General
   Public License.

   Q: Why SILC? Why not IRC3?
   A: Question that is justified no doubt of that. SILC was not started
   to become a replacement for IRC. SILC was something that didn't exist
   in 1996 or even today except that SILC is now released. However, I did
   check out the IRC3 project in 1997 when I started coding and planning
   the SILC protocol.

   But, IRC3 is problematic. Why? Because it still doesn't exist. The
   project is almost at the same spot where it was in 1997 when I checked
   it out. And it was old project back then as well. That's the problem
   of IRC3 project. The same almost happened to SILC as well as I wasn't
   making real progress over the years. I talked to the original author
   of IRC, Jarkko Oikarinen, in 1997 and he directed me to the IRC3
   project, although he said that IRC3 is a lot of talking and not that
   much of anything else. I am not trying to put down the IRC3 project
   but its problem is that no one in the project is able to make a
   decision what is the best way to go about making the IRC3 and I wasn't
   going to be part of that. The fact is that if I would've gone to IRC3
   project, nor IRC3 or SILC would exist today. I think IRC3 could be
   something really great if they just would get their act together and
   start coding the thing.

   Q: What platforms SILC supports?
   A: The SILC Client is available on various Unix systems and is
   reported to work under cygwin on Windows. The SILC Server also works
   on various Unix systems. However, the server has not been tested under
   cygwin as far as we know. The SILC Toolkit is distributed for all
   platforms, Unix, Cygwin and native Windows.

   Q: How do you pronounce SILC?
   A: SILC is usually pronounced as `silk', but you are free to pronounce
   it the way you want.

   Q: Where can I find more information?
   A: For more technical information we suggest reading the SILC Protocol
   specifications. You might also want to take a look at the
   documentation page on the web page.

   Q: I would like to help out, what can I do?
   A: You might want to take a look at the Contributing page and the TODO
   list. You might also want to join the SILC development mailing list.

   2. Protocol Questions

   Q: What is the status of SILC protocol in the IETF?
   A: The SILC protocol specifications has been submitted currently as
   individual submissions. There does not currently exist a working group
   for this sort of project. Our goal is to fully standardize the SILC
   and thus submit it as RFC to the IETF at a later time. This can happen
   only after we have requested the IETF to accept SILC as RFC. As of
   today, we have not yet even requested this from the IETF. We want to
   let the protocol mature a bit more.

   Q: How much SILC Protocol is based on IRC?
   A: SILC is not based on IRC. The client superficially resembles IRC
   client but everything that happens under the hood is nothing alike
   IRC. SILC could *never* support IRC because the entire network
   toppology is different (hopefully more scalable and powerful). So no,
   SILC protocol (client or server) is not based on IRC. Instead, We've
   taken good things from IRC and left all the bad things behind and not
   even tried to burden the SILC with the IRCs problems that will burden
   IRC and future IRC projects till the end. SILC client resembles IRC
   client because it is easier for new users to start using SILC when
   they already know all the commands.

   Q: Why use SILC? Why not IRC with SSL?
   A: Sure, that is possible, although, does that secure the entire IRC
   network? And does that increase or decrease the lags and splits in the
   IRC network? Does that provide user based security where some specific
   private message are secured? Does that provide security where some
   specific channel messages are secured? And I know, you can answer yes
   to some of these questions. But, security is not just about applying
   encryption to traffic and SILC is not just about `encrypting the
   traffic`. You cannot make insecure protocol suddenly secure just by
   encrypting the traffic. SILC is not meant to be IRC replacement. IRC
   is good for some things, SILC is good for same and some other things.

   Q: Can I talk from SILC network to IRC network?
   A: Simple answer for this is No. The protocols are not compatible
   which makes it impossible to directly talk from SILC network to IRC
   network or vice versa. Developing a gateway between these two networks
   would technically be possible but from security point of view strongly
   not recommended. We have no plans for developing such a gateway.

   Q: Does SILC support file transfer?
   A: Yes. The SILC protocol support SFTP as mandatory file transfer
   protocol. It provides simple client to client file transfer, but also
   a possibility for file and directory manipulation. Even though the
   SFTP is the file transfer protocol the support for file transferring
   has been done so that practically any file transfer protocol may be
   used with SILC protocol.

   Q: Does SILC support DCC or alike?
   A: SILC does not support the DCC commonly used in IRC. It does not
   need it since it has builtin support for same features that DCC have.
   You can transfer files securely and encrypted directly with another
   client. You can also negotiate secret key material with another client
   directly to use it in private message encryption. The private messages
   are not, however sent directly between clients. The protocol, on the
   other hand does not prohibit sending messages directly between clients
   if the implementation would support it. The current SILC Client
   implementation does not support it. This means that private messages
   travel through the SILC Network. SILC protocol also has a capability
   to support DCC and CTCP like protocols with SILC. None of them,
   however have not been defined to be used with SILC at the present
   time.

   Q: I am behind a firewall, can I use SILC?
   A: Yes. If your network administrator can open the remote port 706
   (TCP) you can use SILC without problems. You may also compile your
   SILC client with SOCKS support which will proxy your SILC session
   through the firewall.

   Q: How secure SILC really is?
   A: We have tried to make SILC as secure as possible. However, there is
   no security protocol or security software that has not been vulnerable
   to some sort of attacks. SILC is in no means different from this. So,
   it is suspected that there are security holes in the SILC. These holes
   just need to be found so that they can be fixed. SILC's security
   features has been developed from attacker's point of view, and we've
   tried to find all the possible attacks and guard the protocol against
   them.

   But to give you some parameters of security SILC uses the most secure
   crytographic algorithms such as AES (Rijndael), Twofish, Blowfish,
   RC5, etc. SILC does not have DES or 3DES as DES is insecure and 3DES
   is just too slow. SILC also uses cryptographically strong random
   number generator when it needs random numbers. Public key cryptography
   uses RSA (PKCS #1) and Diffie-Hellman algorithms. Key lengths for
   ciphers are initially set to 256. For public key algorithms the
   starting key length is 1024 bits.

   But the best answer for this question is that SILC is as secure as its
   weakest link. SILC is open and the protocol is open and in public thus
   open for security analysis.

   To give a list of attacks that are ineffective against SILC:

   - Man-in-the-middle attacks are ineffective if proper public key
   infrastructure is used, and if all public keys are always verified.
   - IP spoofing is ineffective (because of encryption and trusted keys).
   - Attacks that change the contents of the data or add extra data to
   the packets are ineffective (because of encryption and integrity
   checks).
   - Passive attacks (listenning network traffic) are ineffective
   (because of encryption). Everything is encrypted including
   authentication data such as passwords when they are needed.
   - Any sort of cryptanalytic attacks are tried to make ineffective by
   using the best cryptographic algorithms out there, and by designing
   the protocol to guard against them.

   Q: Does SILC support instant messaging?
   A: SILC is not an instant message (IM) system, like ICQ and the
   others. SILC is more IRC like system, "real-time", connection-oriented
   chat and that kind of stuff. But I guess IRC is too sometimes called
   an Instant Messaging system.

   Q: Why SILC does not have LINKS command like in IRC?
   A: It was felt that this information as an own command in SILC is not
   necessary. Moreover, the topology of the network might be undisclosed
   information even though the servers and routers in the network are
   still open. We feel that the network topology information, if it is
   wanted to be public, and the list of accessible servers can be made
   available in other ways than providing command like LINKS, which shows
   the active server links in IRC.

   Q: Why SILC does not have STATS command like in IRC?
   A: This too was considered as information that the protocol should not
   address. We feel that server implementations will need to implement
   some sort of adminstrative plugin, or module which provides various
   means of accessing statistical and other information in the server.
   And, we do consider this implementation issue, not protocol design
   issue.

   Q: Is anyone outside a channel able to see the channel messages?
   A: A short answer is simply No. A longer answer involves assumptions
   about security conditions. Initially channel keys are generated by the
   server, so if the server would get compromised it would be possible
   for an adversary to see the messages. However, users on the channel
   can prevent this even if the server would be compromised. It is
   possible to set so called channel private key that only the users on
   the channel know about. The servers does not know about the key, and
   therefore cannot see the messages even if they would be compromised.
   So, longer answer results into same as the short one; No.

   Q: How can I register my channel in SILC?
   A: There is no channel registration in SILC. When you join a
   non-existing channel, it is created and it will exist until the last
   person leaves it. When you join a new channel you became the founder
   (see also Q: What does the founder mode on channel mean, and how do I
   set it? and Q: I am founder of invite only channel, how can I join the
   channel after I have left it?) and you can preserve your founder
   status while the channel exists. Cell or network wide founder status
   or persistent founder status (preserving even empty channels for
   limited time) is a debated TODO item and it may or may not happen. If
   it does, its effect could be similar to channel registration.

   Q: Is it true that all messages are encrypted in SILC?
   A: Most definitely yes. The SILC protocol makes it impossible to send
   unencrypted messages or packets to the SILC network. All messages are
   always encrypted, either using session keys, or other secret keys such
   as channel keys or private message keys.

   Q: Can server or SILC operator gain operator mode on a channel?
   A: They cannot get operator status, founder status, join invite only
   channels, escape active bans, escape user limits or anything alike,
   without explicitly being allowed. Only way to get channel operator
   status is that someone ops him. Server and SILC operators in the
   network are normal users with the extra privileges of being able to
   adminstrate their server. They cannot do anything more than a normal
   user.

   Q: Channel name doesn't have #-character or does it?
   A: The #-character is not mandatory part of channel name, like it is
   in IRC. This means that giving the command /JOIN #silc and /JOIN silc
   will join to different channels. This is intentional since the
   #-character clearly is IRC feature and has nothing to do with SILC. If
   you want it to have the character then just join to the channel with
   #-character in the name.

   Q: I have suggestions to SILC Protocol, what can I do?
   A: All suggestions and improvements are of course welcome. You should
   read the protocol specifications first to check out whether your idea
   is covered by them already. The best place to make your idea public is
   the SILC development mailing list. You might want to checkout the TODO
   list from the CVS as well.

   3. Client Questions

   Q: Where can I find SILC clients?
   A: The SILC client is available for free download from the silcnet.org
   web page. Some people have also mentioned words Java and Perl when
   talking about SILC clients. Nothing has appeared yet, though.

   Q: Can I use SILC with IRC client and vice versa?
   A: Generally the answer would be no for both. However, there exist
   already at least one IRC client that supports SILC, the Irssi client.
   The current SILC client is actually based on the user interface of the
   Irssi client. So, yes it is possible to use SILC with some IRC clients
   and vice versa. But, this does not mean that you can talk from SILC
   network to IRC network, that is not possible.

   Q: The default theme sucks, where can I find a better one?
   A: The Irssi SILC client's theme files are almost 100% compatible with
   the original Irssi IRC client's themes. You can get those theme files
   from the Irssi project website. You can also try to make a better
   theme by yourself.

   Q: How do I send a private message?
   A: Sending private message is done by using the MSG command. For
   example, command: /MSG john hello, will send a `hello' message to a
   nickname `john'. By default private messages are secured with session
   keys, and the message is re-encrypted by the servers when the message
   travels to the receiver. If you would like to secure the private
   messages with a private key, you can negotiate a secret key with the
   receiver. Always remember to give WHOIS command before sending a
   private message to assure that you are sending the message to correct
   person.

   Q: How do I negotiate secret key with another user?
   A: It is important to negotiate secret keys if you cannot trust the
   servers and the network you are using. By negotiating a key with the
   user you want to talk to assures that no one except you and your
   friend is able to encrypt and decrypt the messages. The secret key
   negotiation is done with the KEY command. Here is an example of how to
   negotiate keys for securing private messages.

   By giving command: /KEY MSG john agreement 192.168.2.100, you will
   send a key negotiation request to a nickname `john'. The 192.168.2.100
   IP address would be your machine's IP address. You can also define an
   port to the KEY command after the IP address. If you do not do that
   the operating system will bind to a port of its choosing. John will
   receive a notification on the screen that you would like to negotiate
   secret keys with him, and he will receive the IP address and port
   where you are listenning for the negotiation. When he gives command:
   /KEY MSG You negotiate 192.168.2.100 31382, the key negotiation is
   started. During the key negotiation you will be prompted on the screen
   to verify and accept John's public key if you do not have his public
   key already. The John will be prompted to accept your public key as
   well. After the key negotiation is over all private messages sent
   between you and John are secured with the negotiated secret key. Note
   that you must verify the public key you are prompted for, and this is
   very important since someone could be doing man-in-the-middle attack.

   Q: How do I negotiate secret keys behind a NAT?
   A: If only you are behind a NAT, or firewall then key negotiation
   works, but if both you and your friend are behind a NAT then key
   negotiation will not work, since it is done peer to peer. If you are
   behind a NAT then you obviously cannot receive key negotiations, and
   cannot bind to any IP address and port. However, you can still use KEY
   command to negotiate the keys.

   By giving command: /KEY MSG john agreement, without any other
   arguments (such as IP address and port) you will send a negotiation
   request to John, but do not provide an address and port for the John
   to connect to. When John receives the notification on the screen that
   you would like to perform key negotiation, he can give command: /KEY
   MSG You agreement 172.16.100.78, which will send key negotiation
   request back to you. You will receive the IP address and port where
   you need to connect in order to perform the negotiation. After
   receiving the notification you can give command: /KEY MSG john
   negotiate 172.16.100.78 31181, which will start the key negotiation
   with John. This way you can negotiate the keys if you are behind a
   NAT.

   Q: How do I change channel modes?
   A: The command to manage channel modes is CMODE. With this command you
   can change the channel status (to change it to secret channel for
   example), set user limit on the channel, passphrase for the channel,
   set the channel to use private keys on channel, and set the founder
   mode.

   Q: What does the founder mode on channel mean, and how do I set it?
   A: Who ever creates the channel by being the first user to join the
   channel becomes automatically the founder of the channel. Founder has
   some extra privileges on the channel. For example, it is not possible
   to kick the founder off the channel, and there are some channel modes
   that only the founder of the channel can change. If the creator of the
   channel wishes to preserve the channel founder mode even if he leave
   the channel he can set the founder mode for the channel.

   The mode is set by giving command: /CMODE #channel +f -pubkey. This
   will set the founder mode and will use the public key of the founder
   as authenticator when the user is reclaiming the mode back. If the
   founder leaves the channel he will be able to get the founder mode
   back by using JOIN or CUMODE commmands. Giving command /JOIN #channel
   -founder -pubkey, will get the founder mode back at the same time he
   joins the channel, or giving commmand /CUMODE #channel +f -pubkey,
   will also give the founder mode back on the channel after he has
   joined the channel.

   If the channel is destroyed after the last client leaves the channel,
   the founder mode is also reset. Who ever creates the channel after
   that will also get the channel founder mode automatically. Note also
   that the founder mode is local. You can reclaim the mode back only on
   the same server where you set the founder mode in the first place.

   Q: I am founder of invite only channel, how can I join the channel
   after I have left it?
   A: Founder can override the invite only status by reclaiming the
   founder status on the channel using the JOIN command. The channel must
   have the founder mode set in order for it to work. Reclaiming founder
   status using JOIN command is important also if the channel has user
   limit set, and has active bans. Founder can override these conditions
   as well. However, founder cannot override the passphrase of the
   channel if it is set. To get the founder mode during JOIN and to
   override the invite only condition, give command: /JOIN #channel
   -founder -pubkey. This will join the channel and attempt to reclaim
   the founder status back to you. Note that you need to be on the same
   server where you gave the founder mode for the channel for this to
   work.

   Q: How can I op or deop somebody on channel?
   A: Giving operator status, or removing the operator status on a
   channel requires you to have at least operator status, or founder
   status on the channel. You can give operator status to another user by
   using CUMODE command. To give ops give the command: /CUMODE #channel
   +o john, and to remove ops give command: /CUMODE #channel -o john. To
   indicate current channel you can also use `*' character in #channel's
   stead.

   Q: How do I set private key for channel, and what does that mean
   exactly?
   A: Setting private key for channel requires first to set the private
   key mode for the channel. You need to be the founder of the channel to
   be able to do this. Give the command: /CMODE #channel +k. After this
   mode is set the old channel key will not be used to encrypt and
   decrypt channel messages. To set the key for the channel use the KEY
   command. Every user on the channel must do the same thing and set the
   same key. If some user on the channel does not set the key (or does
   not know the key) he won't be able to see any messages on the channel.
   Give the command: /KEY CHANNEL #channel set verysecretkey. This
   command will set the `verysecretkey' passphrase as key to the
   #channel. How exactly other users will know this key is out of scope
   of the SILC protocol. SILC does not provide yet a possibility of
   negotiating secret key with many users at the same time. For this
   reason the secret key on the channel is usually a passphrase or a
   password that all users on the channel have to know. Setting a private
   key for channel means that only the users on the channel who know the
   key is able to encrypt and decrypt messages. Servers do not know the
   key at all. If you remove the private key mode from the channel, all
   users will start automatically using a new channel key to secure
   channel messages.

   Q: How do I transfer a file?
   A: You can transfer files securely using the FILE command. This
   command will automatically negotiate secret key with the remote user
   and the file transfer stream is secured using that key. The file
   transfer stream is always sent peer to peer. If you would like to send
   a file to another user you can give command: /FILE SEND
   path/to/the/file john. This command sends, or actually makes the
   `path/to/the/file' available for download for the user `john'. The
   John will decide whether he wants to actually download the file. When
   John gives the command: /FILE RECEIVE, the key negotiation is started.
   You and John will be prompted to verify and accept each other's public
   key if you do not have it cached already. After key negotiation is
   over the file transfer process starts. If you want to cancel the file
   transfer session, or if John wants to reject the file transfer
   request, giving the command: /FILE CLOSE will close the session.

   Q: How can I get other users public keys?
   A: You can get a user's public key using the GETKEY command. This
   command will fetch the user's public key from the server where the
   user has connected to. The server has verified that the user posesses
   the corresponding private key, however, you will be prompted to verify
   and accept the public key. All client public keys are saved in your
   local key directory in ~/.silc/clientkeys/. You can also receive
   clients public keys during key negotiation and file transfers. The
   GETKEY command can be used to fetch a server's public key as well.
   Those keys are saved in ~/.silc/serverkeys/ directory.

   Q: How can I see the fingerprint of my public key?
   A: You can check out your own fingerprint by giving just WHOIS command
   without any arguments. Additionally you can also dump the contents of
   the key file using the silc program and giving -S option to it. Your
   own public key is always saved in ~/.silc/public_key.pub file. To dump
   your key run silc as: silc -S .silc/public_key.pub. The same way you
   can dump the contents of any public key inside ~/.silc/clientkeys/ and
   ~/.silc/serverkeys/ directories. The WHOIS command will also show
   other users public key fingerprints.

   Q: I gave WHOIS to a nick, and it returned multiple replies, why?
   A: This will happen if there are several same nicknames in the network
   at the same time. As you may already know nicknames are not unique in
   SILC network. This means there can be multiple same nicknames. This
   also means that you can always have the nickname you want. If WHOIS
   returns multiple replies, you can distinguish the users by their
   realname, username, hostname and ultimately by the fingerprint of
   their public key, which the WHOIS will also show. You will also notice
   an additional nickname inside a parenthesis. It may show for example:
   nickname: John (John@otaku). The real nickname is `John', but since
   there are many John's in the network you can access this one using
   `John@otaku'. So, if you were to send private message to this
   particular John you can do it by giving command: /MSG John@otaku
   hello. This will send `hello' message to the John@otaku.

   Q: Is there a command to see all linked servers?
   A: No there is not. For longer answer see also this FAQ.

   Q: How do I list the users of a channel?
   A: The command to list all users on a particular channel is USERS. It
   is also aliased to WHO command in Irssi SILC Client. To see the users
   of the current channel give the command: /USERS *. You can replace the
   `*' with the channel name of your choosing. If the channel is private
   or secret channel, and you have not joined the channel, you cannot
   list the users of that channel.

   Q: What is the difference between OPER and SILCOPER commands?
   A: The OPER command is used to gain server operator privileges on
   normal SILC server, while SILCOPER is used to gain router operator
   (also known as SILC operator) privileges on router server. You cannot
   use SILCOPER command on normal SILC server, it works only on router
   server.

   Q: My Cygwin client crashes with message "Couldn't create //.silc
   directory"
   A: A solutions should be setting HOME enviroment variable to the
   directory where you have unpacked your SILC Client. Type to your
   command prompt something like:
   c:\>set HOME=c:\silc

   Q: Why /join #silc and /join silc doesn't join the same channel?
   A: The #-character is not mandatory part of channel name in SILC. So
   #silc and silc are two different channels. The #-character in channel
   name is IRC feature and has nothing to do with SILC. If you have
   #-character in the channel name, then it is part of the channel name,
   just like %-character, or &-character could be part of channel name.

   4. Server Questions

   Q: Where can I find SILC servers?
   A: The SILC server is available for free download from the silcnet.org
   web page. We are not aware of any other SILC server implementations,
   so far.

   Q: Can I run my own SILC server?
   A: Yes of course. Download the SILC server package, compile and
   install it. Be sure to check out the installation instructions and the
   README file. You also should decide whether you want to run SILC
   server or SILC router.

   Q: What is the difference between SILC server and SILC router?
   A: The topology of the SILC network includes SILC routers and the SILC
   servers (and SILC clients of course). Normal SILC server does not have
   direct connections with other SILC servers. They connect directly to
   the SILC router. SILC Routers may have several server connections and
   they may connect to several SILC routers. The SILC routers are the
   servers in the network that know everything about everything. The SILC
   servers know only local information and query global information from
   the router when necessary.

   If you are running SILC server you want to run it as router only if
   you want to have server connections in it and are prepared to accept
   server connections. You also need to get the router connected to some
   other router to be able to join the SILC network. You may run the
   server as normal SILC server if you do not want to accept other server
   connections or cannot run it as router.

   Q: Why server says permission denied to write to a log file?
   A: The owner of the log files must be same user that the server is run
   under, by default it is user `nobody'. Just change the permissions and
   try again.

   Q: When I connect to my server it says "server does not support one of
   your proposed ciphers", what is wrong?
   A: Most likely the ciphers and others has not been compiled as SIMs
   (modules) and they are configured as modules in the silcd.conf. If
   they are not compiled as modules remove the module paths from the
   ciphers and hash functions from the silcd.conf, so that the server use
   the builtin ciphers. Then try connecting to the server again. It is
   also possible that the client IS proposing some ciphers that your
   server does not support.

   Q: Why SILC server runs on privileged port 706?
   A: Ports 706/tcp and 706/udp have been assigned for the SILC protocol
   by IANA. Server on the network listening above privileged ports
   (>1023) SHOULD NOT be trusted as it could have been set up by
   untrusted party. The server normally drops root privileges after
   startup and then run as user previously defined in silcd.conf.

   Q: I see [Unknown] in the log file, what does it mean?
   A: You can see in the log file for example: [Info] Closing connection
   192.168.78.139:3214 [Unknown]. The [Unknown] means that the connection
   was not authenticated yet, and it is not known whether the connection
   was a client, server or router. There will appear [Client], [Server]
   or [Router] if the connection is authenticated at that point.

   Q: How can I generate a new server key pair?
   A: You can generate a new key pair using the silcd command with the -C
   option. When SILC Server is installed a key pair is generated
   automatically for you. However, it is suggested that you check the
   information found in that key and generate a new key pair if the
   information is incorrect. You can check the information of your public
   key by giving command: silc -S file.pub.

   If you want to generate a new key pair then you can give for example
   command: silcd -C . --identifier="UN=silc-oper, HN=silc.silcnet.org,
   RN=SILC Router Admin, E=silc-oper@silcnet.org, O=SILC Project, C=SK".
   This will create the key pair to current directory, with the specified
   identifier. Please, give the --help option to the silcd to see usage
   help for the -C and --identifier options.

   5. Toolkit Questions

   Q: What is SILC Toolkit?
   A: SILC Toolkit is a package intended for software developers who
   would like to develope their own SILC based applications or help in
   the development of the SILC. The Toolkit includes SILC Protocol Core
   library, SILC Crypto library, SILC Key Exchange (SKE) library, SILC
   Math library, SILC Modules (SIM) library, SILC Utility library, SILC
   Client library and few other libraries.

   Q: Is the SILC Toolkit Reference Manual Available?
   A: Yes, partially completed reference manual is available in the
   Toolkit releases as HTML package and they are available from the
   silcnet.org website as well at the documentation page.

   Q: How do I compile the Toolkit on Unix?
   A: You should read the INSTALL file from the package and follow its
   instructions. The compilation on Unix is as simple as compiling any
   other SILC package. Give, `./configure' command and then `make'
   command.

   Q: How do I compile the Toolkit on Win32?
   A: We have prepared instructions to compile the Toolkit on Win32 in
   the Toolkit package. Please, read the README.WIN32 file from the
   package for detailed instructions how to compile the Toolkit for
   Cygwin, MinGW and native Win32 systems. We have also prepared ready
   MSVC++ Workspace files in the win32/ directory in the package that
   will compile automatically the Toolkit.

   Q: Does the Toolkit package include any sample code?
   A: Yes, naturally. It includes sample codes for two different SILC
   Client implementations, and SILC Server. The silcer/ directory
   includes a simple GUI client based on GTK--, and Win32 samples are
   included in the win32/ directory, for simple client.