******************************************************************************/
-/* Writes data from encrypted buffer to the socket connection. If the
- data cannot be written at once, it will be written later with a timeout.
- The data is written from the data section of the buffer, not from head
- or tail section. This automatically pulls the data section towards end
- after writing the data. */
-
-int silc_packet_write(int sock, SilcBuffer src)
-{
- int ret = 0;
-
- SILC_LOG_DEBUG(("Writing data to socket %d", sock));
-
- if (src->len > 0) {
- ret = write(sock, src->data, src->len);
- if (ret < 0) {
- if (errno == EAGAIN) {
- SILC_LOG_DEBUG(("Could not write immediately, will do it later"));
- return -2;
- }
- SILC_LOG_ERROR(("Cannot write to socket: %s", strerror(errno)));
- return -1;
- }
-
- silc_buffer_pull(src, ret);
- }
-
- SILC_LOG_DEBUG(("Wrote data %d bytes", ret));
-
- return ret;
-}
-
/* Actually sends the packet. This flushes the connections outgoing data
buffer. If data is sent directly to the network this returns the bytes
written, if error occured this returns -1 and if the data could not
SILC_LOG_DEBUG(("Forcing packet send, packet sent immediately"));
/* Write to network */
- ret = silc_packet_write(sock->sock, sock->outbuf);
+ ret = silc_socket_write(sock);
if (ret == -1) {
SILC_LOG_ERROR(("Error sending packet, dropped"));
Packet construct is as follows (* = won't be encrypted):
- x bytes SILC Header
+ n bytes SILC Header
2 bytes Payload length (*)
1 byte Flags
1 byte Packet type
- 1 byte Source ID Type
2 bytes Source ID Length
- x bytes Source ID
- 1 byte Destination ID Type
2 bytes Destination ID Length
- x bytes Destination ID
+ 1 byte Source ID Type
+ n bytes Source ID
+ 1 byte Destination ID Type
+ n bytes Destination ID
1 - 16 bytes Padding
- x bytes Data payload
+ n bytes Data payload
All fields in the packet will be authenticated by MAC. The MAC is
- not computed here, it must be computed differently before encrypting
+ not computed here, it must be computed separately before encrypting
the packet.
*/
/* There is some pending data in the buffer. */
/* Allocate more space if needed */
- if ((sock->outbuf->end - sock->outbuf->tail) < data_len) {
+ if ((sock->outbuf->end - sock->outbuf->tail) <
+ (totlen + 20)) {
SILC_LOG_DEBUG(("Reallocating outgoing data buffer"));
sock->outbuf = silc_buffer_realloc(sock->outbuf,
- sock->outbuf->truelen + totlen);
+ sock->outbuf->truelen +
+ (totlen * 2));
}
oldlen = sock->outbuf->len;
} else {
/* Buffer is free for use */
silc_buffer_clear(sock->outbuf);
+
+ /* Allocate more space if needed */
+ if ((sock->outbuf->end - sock->outbuf->tail) < (totlen + 20)) {
+ SILC_LOG_DEBUG(("Reallocating outgoing data buffer"));
+ sock->outbuf = silc_buffer_realloc(sock->outbuf,
+ sock->outbuf->truelen +
+ (totlen * 2));
+ }
+
silc_buffer_pull_tail(sock->outbuf, totlen);
silc_buffer_pull(sock->outbuf, header_len + padlen);
}
******************************************************************************/
-/* Reads data from the socket connection into the incoming data buffer.
- However, this does not parse the packet, it only reads some amount from
- the network. If there are more data available that can be read at a time
- the rest of the data will be read later with a timeout and only after
- that the packet is ready to be parsed.
-
- The destination buffer sent as argument must be initialized before
- calling this function, and, the data section and the start of the tail
- section must be same. Ie. we add the read data to the tail section of
- the buffer hence the data section is the start of the buffer.
-
- This returns amount of bytes read or -1 on error or -2 on case where
- all of the data could not be read at once. */
-
-int silc_packet_read(int sock, SilcBuffer dest)
-{
- int len = 0;
- unsigned char buf[SILC_PACKET_READ_SIZE];
-
- SILC_LOG_DEBUG(("Reading data from socket %d", sock));
-
- /* Read the data from the socket. */
- len = read(sock, buf, sizeof(buf));
- if (len < 0) {
- if (errno == EAGAIN || errno == EINTR) {
- SILC_LOG_DEBUG(("Could not read immediately, will do it later"));
- return -2;
- }
- SILC_LOG_ERROR(("Cannot read from socket: %d:%s", sock, strerror(errno)));
- return -1;
- }
-
- if (!len)
- return 0;
-
- /* Insert the data to the buffer. If the data doesn't fit to the
- buffer space is allocated for the buffer. */
- /* XXX: This may actually be bad thing as if there is pending data in
- the buffer they will be lost! */
- if (dest) {
-
- /* If the data doesn't fit we just have to allocate a whole new
- data area */
- if (dest->truelen <= len) {
-
- /* Free the old buffer */
- memset(dest->head, 'F', dest->truelen);
- silc_free(dest->head);
-
- /* Allocate new data area */
- len += SILC_PACKET_DEFAULT_SIZE;
- dest->data = silc_calloc(len, sizeof(char));
- dest->truelen = len;
- dest->len = 0;
- dest->head = dest->data;
- dest->data = dest->data;
- dest->tail = dest->data;
- dest->end = dest->data + dest->truelen;
- len -= SILC_PACKET_DEFAULT_SIZE;
- }
-
- silc_buffer_put_tail(dest, buf, len);
- silc_buffer_pull_tail(dest, len);
- }
-
- SILC_LOG_DEBUG(("Read %d bytes", len));
-
- return len;
-}
-
/* Processes the received data. This checks the received data and
calls parser callback that handles the actual packet decryption
and parsing. If more than one packet was received this calls the
sock->type == SILC_SOCKET_TYPE_SERVER ? "Server" :
"Router")));
- /* Allocate the incoming data buffer if not done already. */
- if (!sock->inbuf)
- sock->inbuf = silc_buffer_alloc(SILC_PACKET_DEFAULT_SIZE);
-
/* Read some data from connection */
- ret = silc_packet_read(sock->sock, sock->inbuf);
+ ret = silc_socket_read(sock);
return ret;
}
len1 = (truelen + padlen) - (SILC_PACKET_MIN_HEADER_LEN - 2);
silc_buffer_pull(buffer, SILC_PACKET_MIN_HEADER_LEN - 2);
+ if (len1 - 2 > buffer->len) {
+ SILC_LOG_DEBUG(("Garbage in header of packet, bad packet length, "
+ "packet dropped"));
+ return FALSE;
+ }
+
cipher->cipher->decrypt(cipher->context, buffer->data + 2,
buffer->data + 2, len1 - 2,
cipher->iv);
/* Allocate packet context */
-SilcPacketContext *silc_packet_context_alloc()
+SilcPacketContext *silc_packet_context_alloc(void)
{
SilcPacketContext *ctx = silc_calloc(1, sizeof(*ctx));
ctx->users++;