No specific mode for client. This is the initial
setting when new client is created. The client is
- normal client now.
+ normal client and is present in the network.
0x00000001 SILC_UMODE_SERVER_OPERATOR
0x00000002 SILC_UMODE_ROUTER_OPERATOR
Marks the user as router (SILC) operator. Client
- MUST NOT this mode itself. Router sets this mode to
- the client when client attains the router operator
+ MUST NOT set this mode itself. Router sets this mode
+ to the client when client attains the router operator
privileges by SILC_COMMAND_SILCOPER command. Client
MAY unset the mode itself.
Marks that the user is not currently present in the
SILC Network. Client MAY set and unset this mode.
+
+ 0x00000008 SILC_UMODE_INDISPOSED
+
+ Marks that the user is currently indisposed and may
+ not be able to receive any messages, and that user may
+ not be present in the network. Client MAY set and
+ unset this mode.
+
+
+ 0x00000010 SILC_UMODE_BUSY
+
+ Marks that the user is currently busy and may not
+ want to receive any messages, and that user may not
+ be present in the network. Client MAY set and unset
+ this mode.
+
+
+ 0x00000020 SILC_UMODE_PAGE
+
+ User is not currently present or is unable to receive
+ messages, and prefers to be paged in some mechanism
+ if the user needs to be reached. Client MAY set and
+ unset this mode.
+
+
+ 0x00000040 SILC_UMODE_HYPER
+
+ Marks that the user is hyper active and is eager to
+ receive and send messages. Client MAY set and unset
+ this mode.
+
+
+ 0x00000080 SILC_UMODE_ROBOT
+
+ Marks that the client is actually a robot program.
+ Client MAY set and unset this mode.
+
+
+ 0x00000100 SILC_UMODE_ANONYMOUS
+
+ Marks that the client is anonymous client. Server
+ that specificly is designed for anonymous services
+ can set and unset this mode. Client MUST NOT set or
+ unset this mode itself. A client with this mode set
+ would have the username and the hostname information
+ scrambled by the server which set this mode.
+
+
+ 0x00000200 SILC_UMODE_BLOCK_PRIVMSG
+
+ Marks that the client wishes to block private
+ messages sent to the client, unless the Private
+ Message Key flag is set in the SILC packet header.
+ If this mode is set server MUST NOT deliver private
+ messages to the client without the Private Message
+ Key flag being set.
+
+ A separate service could provide additional filtering
+ features for accepting private messages from certain
+ sender. However, this document does not specify such
+ service.
+
+ The client MAY set and unset this mode.
+
+
Reply messages to the command:
Max Arguments: 2
Sets channel operator privileges on the channel for a
client on the channel. Channel founder and channel operator
- MAY set/unset this mode.
+ MAY set/unset this mode. The client MAY remove this mode
+ at any time.
+
+
+ 0x00000004 SILC_CUMODE_BLOCK_MESSAGES
+
+ Marks that the client wishes not to receive any channel
+ messages sent for the channel. Client MAY set and unset
+ this mode to itself. Client MUST NOT set it to anyone else.
+ When this mode is set server MUST NOT deliver channel
+ messages to this client. Other packets such as channel
+ key packets are still sent to the client.
+
+ A separate service could provide additional filtering
+ features for accepting channel messages from certain
+ sender. However, this document does not specify such
+ service.
+
Reply messages to the command:
1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-| Status Message |
+| Status | Error |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
.in 3
.in 6
-o Status Message (2 bytes) - Indicates the status message.
- All Status messages are described in the next section.
+o Status (1 byte) - Indicates the status message type,
+ error, start of list, entry of list or end of list.
+
+o Error (1 byte) - Indicates the error if the Status
+ field is some list status, which means there are list
+ of errors.
.in 3
+The values in Status and Error fields are set according
+the following rules:
+
+.in 6
+o If there is single reply and error has not occurred
+ then Status field includes value SILC_STATUS_OK, and
+ the Error field MUST be ignored (and set to zero
+ value).
+
+o If there is single error, then Status field includes
+ one of the error values, and the Error field MUST be
+ ignored (and set to zero value).
+
+o If there will be multiple successful command replies
+ then Status field includes SILC_STATUS_LIST_START,
+ SILC_STATUS_LIST_ITEM or SILC_STATUS_LIST_END value,
+ and Error field is set to SILC_STATUS_OK.
+
+o If there are multiple error replies then Status field
+ includes SILC_STATUS_LIST_START, SILC_STATUS_LIST_ITEM
+ or SILC_STATUS_LIST_END value, and the Error field
+ includes the error value.
+.in 3
+
+This way it is possible to send single successful or
+single error reply, but also multiple successful and
+multiple error replies. Note that it is possible to
+send both list of successful replies and list of error
+replies at the same time, however in this case the
+list of error replies MUST be sent after the successful
+replies. This way the recipient may ignore the multiple
+errors if it wishes to do so.
+
+All Status messages are described in the next section.
+
.ti 0
2.3.2 SILC Command Status List
projects / silc.git / blobdiff