TODO/bugs in Irssi SILC client
==============================
- o Add local command to switch the channel's private key when channel has
- several private keys. Currently sending channel messages with many
- keys is not possible because changing the key is not possible by the
- user.
-
- o JOINing to +a (requires passphrase to JOIN) does not work on autojoin.
- Seems the passwords in the .silc/config has no effect.
-
- o Add local commands to list the current server and client public keys
- that the user has. And a local command to dump the contents of the
- public key to the screen. Something like LISTKEYS, SHOWKEY...
-
- o We should get rid of the clientconfig.[ch] in Irssi SILC and move the
- cipher, hash, hmac and pkcs configuration to the Irssi SILC's config
- file.
-
- o Add PERL scripting support from Irssi CVS.
-
- o Extend the /HELP command to support sub commands or something. So
- that user can say /help set mutual_authentication they would get
- help of the mutual_authentication setting.
-
- o Set different kind of settings, like, /set mutual_authentication,
- /set key_exchange_timeout, /set conn_auth_timeout etc etc.
+ o /cumode for unknown nick does not give any error message (Fix this to
+ 1.0).
TODO/bugs In SILC Client Library
o The PRIVATE_MESSAGE_KEY packet is not handled (it is implemented
though). This should be added and perhaps new client operation
should be added to notify application that it was received and
- set the key only if application wishes to set (accept the key) it.
+ set the key only if application wishes to set (accept the key) it
+ (Do this to 1.0).
- o Additions to do after protocol version 1.1:
+ o Remove conn->current_channel.
- o Fix the NICK_CHANGE notify handling not to create new entry
- for the changed client, but take the nickname from the notify
- (removes need for resolving as well). Protocol TODO entry 3.
+ o Additions to do after protocol version 1.1:
o Add support for list of errors in command replies. Protocol
TODO entry 1.
TODO/bugs In SILC Server
========================
+ o Configuration file additions (Do this to 0.8.x):
+
+ o Add incoming connection frequency, incoming connection frequency
+ for single IP address, key exchange frequency, key exchange
+ frequency for single IP. Add also frequency base.
+
+ o If server send CUMODE_CHANGE notify (like setting founder) to router
+ and router does not have founder on channel (founder is left or there's
+ no founder on channel at all), the router will accept the server's
+ founder mode change, even though it perhaps should not do that (Fix
+ this to 0.9).
+
o The router should check for validity of received notify packets from
- servers (after all buggy servers may send notify that is actually
- something that should have not been sent).
+ routers (fix this to 0.9). Following NOTIFYs needs to be verified:
- o Add hashed passwords to silcd.conf file.
+ o JOIN (check that joining is allowed)
+ o SIGNOFF (maybe should check that notifier owns the client)
- o Backup router related issues
+ o Backup router related issues (Fix this to 1.0):
o Channel user mode changes are notified unnecessarely when
switching to backup router on router crash.
seconds. Now it is possible to accept n incoming JOIN commands
and process them without any timeouts. THis must be employed because
each JOIN command will create and distribute the new channel key
- to everybody on the channel.
-
- o New configuration file format must be added. The new one will be
- done using the dotconf config library (lib/dotconf). The following
- tasks relates closely to this as well and must be done at the same time
- when adding the new config file format:
-
- o Server says that it is able to listen on multiple ports but
- currently that is bogus. It can, but internals are for single
- server.
-
- o Protocol execution timeouts are hard coded, should be
- configurable.
+ to everybody on the channel (Fix this to 1.0).
- o IP address fields in configuration file should accept mask
- format as well, IP/MASK, and not just plain IP.
+ o Lots of statistics updating is missing around the server.
o If client's public key is saved in the server (and doing public key
authentication) then the hostname and the username information could
o WIN32 silc_net_create_connection_async does not work the same way
than on Unix. Do it with threads on WIN32. The function works but
- is not actually async currently.
+ is not actually async currently (Fix this to 1.0).
- o Rewrite the lib/silcsim/silcsim.h. The SilcSimContext should be
- private and silc_sim_alloc should take necessary arguments.
+
+TODO in Toolkit Documentation
+=============================
+
+Stuff that needs to be done in order to complete the Tooolkit Reference
+Manual (Do these to 0.9 and 1.0).
+
+ o ROBOdoc documenting missing from lib/silcutil/silcbuffer.h.
+
+ o ROBOdoc documenting missing from lib/silcutil/silcdlist.h.
+
+ o ROBOdoc documenting missing from lib/silcutil/silcfileutil.h.
+
+ o ROBOdoc documenting missing from lib/silccrypt/silchash.h.
+
+ o ROBOdoc documenting missing from lib/silccrypt/silccipher.h.
+
+ o ROBOdoc documenting missing from lib/silccrypt/silcpkcs.h.
+
+ o Write "Programming with Toolkit" document, describing how to build
+ Toolkit, how the build system works, where is everything, how
+ new (external) projects can be glued into Toolkit (use irssi as an
+ example), and how external projects can use Toolkit without gluing into
+ it (how to link etc), debugging, architecture, types, etc.
+
+ o Write "Platform Implementations" document to describe what platforms
+ Toolkit support, what has been implemented, what has not been, what
+ works differently etc.
TODO in SILC Protocol
=====================
-Current protocol version is 1.0. However, it is far from being perfect,
-and needs to include additional features. Following protocol TODO entries
-describe new stuff to be added to protocol versions 1.x.
-
- 1. Re-define the Status Payload: it is now 16 bits, split it into two
- 8 bits fields. First field includes status types from 0 - 9 and
- 10 - n *if* it is not an list of errors. If it is list of errors then
- the first field includes 1, 2 and/or 3, and the second field includes
- the error status 10 - n. This way it is possible to send multiple
- errors (list of errors) and we have a way to tell the receiver that
- there will be other errors as well. The second field is used only
- if there is list of errors. If normal status, or normal (single)
- error status the second field is set to zero, and must be ignored.
- Hence, the status works same way as now except for list of errors.
- To be included in protocol version 1.1.
-
2. Define that WHOIS and IDENTIFY commands must send list of errors
if multiple Client ID (or Channel ID and Server ID for IDENTIFY) was
requested and was not found. Each unfound entry must cause an error
*after* sending successfully found entries (this way receiver may
ignore them). To be included in protocol version 1.1.
- 3. Define the NICK_CHANGE notify to send the changed nickname as a new
- third argument. This will make the NICK_CHANGE notify handling easier
- in the receiver's end (client primarily) since it removes the
- requirement that receiver must resolve (using IDENTIFY or WHOIS) the
- new Client ID received in the notify (because of the new nickname is
- unknown). To be included in protocol version 1.1.
-
- 4. Add "request parameters" or similar to the WHOIS command, which can
- be used to request various parameters (something not returned by
- standard WHOIS command) about clients (info that could be fetched
- even from clients). Additional specification (or appendix) should
- be done to define the payload and the parameters. It could be used
- to make the WHOIS command support various search conditions as well.
- This would be the way to extend the WHOIS command to support various
- new features without always making the command incompatible to previous
- version. To be included in protocol version 1.1.
-
- 5. Inviting and banning by public key should be made possible. To be
- included in protocol version 1.x.
-
- 6. Add perhaps SILENCE_USERS, SILENCE_OPERS channel user modes which
- can be used to silence (moderate) normal users and opers (this set
- only by founder). To be included in protocol version 1.1.
-
- 7. Channel Message Payload needs slight redesining to include the IV
- field to the MAC generation of the payload. It is authenticated
- by the packet's MAC but not by the payload's MAC. Since the IV
- belongs to the payload, its integrity should be protected by the
- payload MAC and not alone by packet MAC. To be included in protocol
- version 1.1.
-
- 8. Remove the administrative commands from the protocol all together.
- It does not make sense for the protocol to define how a server is
- reconnected or shutdown, since they are implementation and
- configuration issues. Besides protocol provides only limited set of
- administrative commands and cannot define all that one could imagine.
- To be included in protocol version 1.1.
-
- 9. Add SILC_MESAGE_FLAG_REPLY for being other side to the
- SILC_MESSAGE_FLAG_REQUEST. Add generic SILC_MESSAGE_FLAG_DATA, which
- can include generic payload, which can include generic data. The
- payload definition is left out for now. To be included in protocol
- version 1.1.
-
-
-TODO After 1.0
-==============
-
-A rough list of stuff that is going to be done to SILC after 1.0 or at
-least could be done.
-
- o Implement the defined SilcDH API. The definition is in
- lib/silccrypt/silcdh.h.
-
- o X.509 certificate support. SILC protocol supports certificates and
- it would be great to have support for them. This is a big task as
- support has to be made for ASN.1 as well. I've looked into OpenSSL
- package as it has X.509 certificate support (and ASN.1 as well).
- The code does not look very good to my eye but it has some potentials.
- This should be looked at more closely.
-
- Naturally own SILC Certificate API has to be defined regardles what
- the actual X.509 library is (OpenSSL X.509 or something else). Other
- choice is to write own X.509 library but I'm not going to do it -
- I can help to migrate the OpenSSL X.509 into SILC and I can help if
- someone would like to write the X.509 library - but I'm not going
- to start writing one myself. Anyhow, the OpenSSL X.509 lib should
- be checked.
-
- Other package that should be checked is the NSS's X509 library,
- which I like more over OpenSSL package.
-
- o SSH2 public keys support, allowing the use of SSH2 public keys in
- SILC.
-
- o OpenPGP certificate support, allowing the use of PGP public keys
- in SILC.
-
- o Compression routines are missing. The protocol supports packet
- compression thus it must be implemented. SILC Zip API must be
- defined.
-
- o Rewrite the lib/silcutil/silcprotocol.[ch] not to have [un]register
- functions, but to make it context based all the way. The alloc should
- take as argument the protocol type and its callback (not only
- final callback). It is not good that we have now global list of
- registered protocols.
-
- o Optimizations in Libraries
-
- o There is currently three (3) allocations per packet in the
- silc_packet_receive_process, which is used to process and
- dispatch all packets in the packet queue to the parser callback
- function. First allocation is for parse_ctx, second for the
- SilcPacketContext, and third for packet->buffer where the actual
- data is saved.
-
- The parse_ctx allocation can be removed by adding it as a
- structure to the SilcPacketContext. When the SilcPacketContext
- is allocated there is space for the parse context already.
-
- The silc_packet_context_alloc could have a free list of
- packet contexts. If free packet context is found from the list
- it is returned instead of allocating a new one. The library
- could at first allocate them and save them to the free list
- until enough contexts for smooth processing exists in the list.
- This would remove a big allocation since the structure is
- quite big, and even bigger if it would include the parse_ctx.
-
- The packet->buffer can be optimized too if the SilcBuffer
- interface would support free lists as well. Maybe such could
- be done in the same way as for SilcPacketContext. The
- silc_buffer_alloc would check free list before actually
- allocating new memory. Since the packets in the SILC protocol
- usually are about the same size (due to padding) it would be
- easy to find suitable size buffer from the free list very
- quickly.
-
- These naturally cause the overal memory consumption to grow
- but would take away many allocations that can be done several
- times in a second.
-
- o Move the actual file descriptor task callback (the callback that
- handles the incoming data, outgoing data etc, that is implemnted
- in server and client separately (silc_server_packet_process and
- silc_client_packet_proces)) to the low level socket connection
- handling routines, and create an interface where the application
- can register a callbacks for incoming data, outoing data and EOF
- receiving, which the library will call when necessary. This way
- we can move the data handling in one place.
-
- o Add silc_id_str2id to accept the destination buffer as argument
- and thus not require any memory allocation. Same will happen
- with silc_id_payload_* functions.
-
- o Optimizations in Server
-
- o Remove the big switch statement from the function
- silc_server_packet_parse_type and replace it with predefined
- table of function pointers where each of the slot in table
- represents the packet type value.
-
- Same could be done with notify packets which has big switch
- statement too. Same kind of table of notify callbacks could be
- done as well.
-
- o The parser callback in the server will add a timeout task for
- all packets. It will require registering and allocating a
- new task to the SilcSchedule. Maybe, at least, for server
- and router packets the parser would be called immediately
- instead of adding it to the scheduler with 0 timeout. It
- should be analyzed too how slow the task registering process
- actually is, and find out ways to optimize it.
-
- o Add SilcAsyncOperation to utility library.
-
- o Cipher optimizations (asm, that this) at least for i386 would be nice.
-
- o Add builtin SOCKS and HTTP Proxy support, well the SOCKS at least.
- SILC currently supports SOCKS4 and SOCKS5 but it needs to be compiled
- in separately.
+ 17. Cell wide channel founder support, and permanent channels when
+ founder mode set.
+
+ 24. Implement the <Requested Attributes> and the Attribute Payload to
+ the core library, client and server.
+
+ 26. INVITE notify blocking by mode? Quiet user mode to quiet a user on
+ channel, settable by chan op/founder?
projects / silc.git / blobdiff