4 To configure and compile SILC package give the comands:
10 This will install the SILC binaries and configuration files into the
11 /usr/local/silc/ directory. System wide configuration files are installed
12 into the /etc/silc/ directory.
14 Some Configuration Options
15 ==========================
17 You can give various options to the `configure' shell script. You should
18 give --help command to the `configure' to see all of them. Here is listed
19 few options that you might want to use. Please refer to the rest of this
20 file for more generic installation instructions.
24 If you wish to use GMP library for arbitrary precision arithmetic
25 library instead of using the MPI library included in the package, you can
26 give the --with-gmp=PATH option to the `configure'. The PATH is the path
27 to the GMP library in your system.
31 If you have trouble compiling the assembler optimized code in the
32 package or does not want to use them, you can give the --disable-asm
33 option to the `configure' script. This will assure that assembler
34 optimized code is not compiled in.
38 If you would like to enable the debugging for the compiled programs
39 you can give this option to the `configure'.
43 If you do not want to compile the programs with multi threads support
44 you can give --disable-threads option. In this case all compiled programs
45 will work in single thread only.
49 The `configure' will attempt to check for IPv6 support in your system.
50 However, if it fails, but you still want to compile in the IPv6 support
51 you can give --enable-ipv6 option to force the IPv6 support.
56 These are generic installation instructions.
58 The `configure' shell script attempts to guess correct values for
59 various system-dependent variables used during compilation. It uses
60 those values to create a `Makefile' in each directory of the package.
61 It may also create one or more `.h' files containing system-dependent
62 definitions. Finally, it creates a shell script `config.status' that
63 you can run in the future to recreate the current configuration, a file
64 `config.cache' that saves the results of its tests to speed up
65 reconfiguring, and a file `config.log' containing compiler output
66 (useful mainly for debugging `configure').
68 If you need to do unusual things to compile the package, please try
69 to figure out how `configure' could check whether to do them, and mail
70 diffs or instructions to the address given in the `README' so they can
71 be considered for the next release. If at some point `config.cache'
72 contains results you don't want to keep, you may remove or edit it.
74 The file `configure.in' is used to create `configure' by a program
75 called `autoconf'. You only need `configure.in' if you want to change
76 it or regenerate `configure' using a newer version of `autoconf'.
78 The simplest way to compile this package is:
80 1. `cd' to the directory containing the package's source code and type
81 `./configure' to configure the package for your system. If you're
82 using `csh' on an old version of System V, you might need to type
83 `sh ./configure' instead to prevent `csh' from trying to execute
86 Running `configure' takes awhile. While running, it prints some
87 messages telling which features it is checking for.
89 2. Type `make' to compile the package.
91 3. Optionally, type `make check' to run any self-tests that come with
94 4. Type `make install' to install the programs and any data files and
97 5. You can remove the program binaries and object files from the
98 source code directory by typing `make clean'. To also remove the
99 files that `configure' created (so you can compile the package for
100 a different kind of computer), type `make distclean'. There is
101 also a `make maintainer-clean' target, but that is intended mainly
102 for the package's developers. If you use it, you may have to get
103 all sorts of other programs in order to regenerate files that came
104 with the distribution.
106 Compilers and Options
107 =====================
109 Some systems require unusual options for compilation or linking that
110 the `configure' script does not know about. You can give `configure'
111 initial values for variables by setting them in the environment. Using
112 a Bourne-compatible shell, you can do that on the command line like
114 CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
116 Or on systems that have the `env' program, you can do it like this:
117 env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
119 Compiling For Multiple Architectures
120 ====================================
122 You can compile the package for more than one kind of computer at the
123 same time, by placing the object files for each architecture in their
124 own directory. To do this, you must use a version of `make' that
125 supports the `VPATH' variable, such as GNU `make'. `cd' to the
126 directory where you want the object files and executables to go and run
127 the `configure' script. `configure' automatically checks for the
128 source code in the directory that `configure' is in and in `..'.
130 If you have to use a `make' that does not supports the `VPATH'
131 variable, you have to compile the package for one architecture at a time
132 in the source code directory. After you have installed the package for
133 one architecture, use `make distclean' before reconfiguring for another
139 By default, `make install' will install the package's files in
140 `/usr/local/bin', `/usr/local/man', etc. You can specify an
141 installation prefix other than `/usr/local' by giving `configure' the
142 option `--prefix=PATH'.
144 You can specify separate installation prefixes for
145 architecture-specific files and architecture-independent files. If you
146 give `configure' the option `--exec-prefix=PATH', the package will use
147 PATH as the prefix for installing programs and libraries.
148 Documentation and other data files will still use the regular prefix.
150 In addition, if you use an unusual directory layout you can give
151 options like `--bindir=PATH' to specify different values for particular
152 kinds of files. Run `configure --help' for a list of the directories
153 you can set and what kinds of files go in them.
155 If the package supports it, you can cause programs to be installed
156 with an extra prefix or suffix on their names by giving `configure' the
157 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
162 Some packages pay attention to `--enable-FEATURE' options to
163 `configure', where FEATURE indicates an optional part of the package.
164 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
165 is something like `gnu-as' or `x' (for the X Window System). The
166 `README' should mention any `--enable-' and `--with-' options that the
169 For packages that use the X Window System, `configure' can usually
170 find the X include and library files automatically, but if it doesn't,
171 you can use the `configure' options `--x-includes=DIR' and
172 `--x-libraries=DIR' to specify their locations.
174 Specifying the System Type
175 ==========================
177 There may be some features `configure' can not figure out
178 automatically, but needs to determine by the type of host the package
179 will run on. Usually `configure' can figure that out, but if it prints
180 a message saying it can not guess the host type, give it the
181 `--host=TYPE' option. TYPE can either be a short name for the system
182 type, such as `sun4', or a canonical name with three fields:
185 See the file `config.sub' for the possible values of each field. If
186 `config.sub' isn't included in this package, then this package doesn't
187 need to know the host type.
189 If you are building compiler tools for cross-compiling, you can also
190 use the `--target=TYPE' option to select the type of system they will
191 produce code for and the `--build=TYPE' option to select the type of
192 system on which you are compiling the package.
197 `configure' recognizes the following options to control how it
201 Use and save the results of the tests in FILE instead of
202 `./config.cache'. Set FILE to `/dev/null' to disable caching, for
203 debugging `configure'.
206 Print a summary of the options to `configure', and exit.
211 Do not print messages saying which checks are being made. To
212 suppress all normal output, redirect it to `/dev/null' (any error
213 messages will still be shown).
216 Look for the package's source code in directory DIR. Usually
217 `configure' can determine that directory automatically.
220 Print the version of Autoconf used to generate the `configure'
223 `configure' also accepts some other, not widely useful, options.