X-Git-Url: http://git.silcnet.org/gitweb/?p=silc.git;a=blobdiff_plain;f=lib%2Fsilcutil%2Funix%2Fsilcunixsockconn.c;h=4d14ac5fc323626aa037aeff5eabedeca60441da;hp=dada9d6e73cb49a2255f88ae64bd04abe12d51ed;hb=382d15d447b7a95390decfa783836ae4fe255b3d;hpb=a818c5b5411bbc4436d1c5f011236985c96bb787

diff --git a/lib/silcutil/unix/silcunixsockconn.c b/lib/silcutil/unix/silcunixsockconn.c
index dada9d6e..4d14ac5f 100644
--- a/lib/silcutil/unix/silcunixsockconn.c
+++ b/lib/silcutil/unix/silcunixsockconn.c
@@ -33,6 +33,8 @@ int silc_socket_write(SilcSocketConnection sock)
   int fd = sock->sock;
   SilcBuffer src = sock->outbuf;
 
+  if (!src)
+    return -2;
   if (SILC_IS_DISABLED(sock))
     return -1;
 
@@ -41,7 +43,7 @@ int silc_socket_write(SilcSocketConnection sock)
   if (src->len > 0) {
     ret = write(fd, src->data, src->len);
     if (ret < 0) {
-      if (errno == EAGAIN) {
+      if (errno == EAGAIN || errno == EINTR) {
 	SILC_LOG_DEBUG(("Could not write immediately, will do it later"));
 	return -2;
       }
@@ -50,6 +52,13 @@ int silc_socket_write(SilcSocketConnection sock)
       return -1;
     }
 
+    if (ret < src->len) {
+      SILC_LOG_DEBUG(("Wrote data %d of %d bytes, will write rest later",
+		      ret, src->len));
+      silc_buffer_pull(src, ret);
+      return -2;
+    }
+
     silc_buffer_pull(src, ret);
   }
 
@@ -58,6 +67,19 @@ int silc_socket_write(SilcSocketConnection sock)
   return ret;
 }
 
+/* QoS read handler, this will call the read and write events to indicate
+   that data is available again after a timeout. */
+
+SILC_TASK_CALLBACK(silc_socket_read_qos)
+{
+  SilcSocketConnection sock = context;
+  sock->qos->applied = TRUE;
+  silc_schedule_set_listen_fd(sock->qos->schedule, sock->sock,
+			      (SILC_TASK_READ | SILC_TASK_WRITE), TRUE);
+  sock->qos->applied = FALSE;
+  silc_socket_free(sock);
+}
+
 /* Reads data from the socket connection into the incoming data buffer.
    It reads as much as possible from the socket connection. This returns
    amount of bytes read or -1 on error or -2 on case where all of the
@@ -72,6 +94,43 @@ int silc_socket_read(SilcSocketConnection sock)
   if (SILC_IS_DISABLED(sock))
     return -1;
 
+  /* If QoS was applied to socket then return earlier read data but apply
+     QoS to it too, if necessary. */
+  if (sock->qos) {
+    if (sock->qos->applied) {
+      if (sock->qos->data_len) {
+	/* Pull hidden data since we have it from earlier QoS apply */
+	silc_buffer_pull_tail(sock->inbuf, sock->qos->data_len);
+	len = sock->qos->data_len;
+	sock->qos->data_len = 0;
+      }
+
+      if (sock->inbuf->len - len > sock->qos->read_limit_bytes) {
+	/* Seems we need to apply QoS for the remaining data as well */
+	silc_schedule_task_add(sock->qos->schedule, sock->sock,
+			       silc_socket_read_qos, silc_socket_dup(sock),
+			       sock->qos->limit_sec, sock->qos->limit_usec,
+			       SILC_TASK_TIMEOUT, SILC_TASK_PRI_LOW);
+	silc_schedule_unset_listen_fd(sock->qos->schedule, sock->sock);
+      
+	/* Hide the rest of the data from the buffer. */
+	sock->qos->data_len = (sock->inbuf->len - len - 
+			       sock->qos->read_limit_bytes);
+	silc_buffer_push_tail(sock->inbuf, sock->qos->data_len);
+      }
+
+      if (sock->inbuf->len)
+	return sock->inbuf->len;
+    }
+
+    /* If we were called and we have active QoS data pending, return
+       with no data */
+    if (sock->qos->data_len) {
+      silc_schedule_unset_listen_fd(sock->qos->schedule, sock->sock);
+      return -2;
+    }
+  }
+
   SILC_LOG_DEBUG(("Reading data from socket %d", fd));
 
   /* Read the data from the socket. */
@@ -103,6 +162,55 @@ int silc_socket_read(SilcSocketConnection sock)
 
   SILC_LOG_DEBUG(("Read %d bytes", len));
 
+  /* Apply QoS to the read data if necessary */
+  if (sock->qos) {
+    struct timeval curtime;
+    silc_gettimeofday(&curtime);
+
+    /* If we have passed the rate time limit, set our new time limit,
+       and zero the rate limit. */
+    if (!silc_compare_timeval(&curtime, &sock->qos->next_limit)) {
+      curtime.tv_sec++;
+      sock->qos->next_limit = curtime;
+      sock->qos->cur_rate = 0;
+    }
+    sock->qos->cur_rate++;
+
+    /* If we are not withing rate limit apply QoS for the read data */
+    if (sock->qos->cur_rate > sock->qos->read_rate) {
+      silc_schedule_task_add(sock->qos->schedule, sock->sock,
+			     silc_socket_read_qos, silc_socket_dup(sock),
+			     sock->qos->limit_sec, sock->qos->limit_usec,
+			     SILC_TASK_TIMEOUT, SILC_TASK_PRI_LOW);
+      silc_schedule_unset_listen_fd(sock->qos->schedule, sock->sock);
+
+      /* Check the byte limit as well, and do not return more than allowed */
+      if (sock->inbuf->len > sock->qos->read_limit_bytes) {
+	/* Hide the rest of the data from the buffer. */
+	sock->qos->data_len = sock->inbuf->len - sock->qos->read_limit_bytes;
+	silc_buffer_push_tail(sock->inbuf, sock->qos->data_len);
+	len = sock->inbuf->len;
+      } else {
+	/* Rate limit kicked in, do not return data yet */
+	return -2;
+      }
+    } else {
+      /* Check the byte limit, and do not return more than allowed */
+      if (sock->inbuf->len > sock->qos->read_limit_bytes) {
+	silc_schedule_task_add(sock->qos->schedule, sock->sock,
+			       silc_socket_read_qos, silc_socket_dup(sock),
+			       sock->qos->limit_sec, sock->qos->limit_usec,
+			       SILC_TASK_TIMEOUT, SILC_TASK_PRI_LOW);
+	silc_schedule_unset_listen_fd(sock->qos->schedule, sock->sock);
+
+	/* Hide the rest of the data from the buffer. */
+	sock->qos->data_len = sock->inbuf->len - sock->qos->read_limit_bytes;
+	silc_buffer_push_tail(sock->inbuf, sock->qos->data_len);
+	len = sock->inbuf->len;
+      }
+    }
+  }
+
   return len;
 }