# When testing changes, the easiest way to reload the theme is with /RELOAD.
# This reloads the configuration file too, so if you did any changes remember
# to /SAVE it first. Remember also that /SAVE overwrites the theme file with
# old data so keep backups :)

# TEMPLATES:

# The real text formats that irssi uses are the ones you can find with
# /FORMAT command. Back in the old days all the colors and texts were mixed
# up in those formats, and it was really hard to change the colors since you
# might have had to change them in tens of different places. So, then came
# this templating system.
    
# Now the /FORMATs don't have any colors in them, and they also have very
# little other styling. Most of the stuff you need to change is in this
# theme file. If you can't change something here, you can always go back
# to change the /FORMATs directly, they're also saved in these .theme files.

# So .. the templates. They're those {blahblah} parts you see all over the
# /FORMATs and here. Their usage is simply {name parameter1 parameter2}.
# When irssi sees this kind of text, it goes to find "name" from abstracts
# block below and sets "parameter1" into $0 and "parameter2" into $1 (you
# can have more parameters of course). Templates can have subtemplates.
# Here's a small example:
#   /FORMAT format hello {colorify {underline world}}
#   abstracts = { colorify = "%G$0-%n"; underline = "%U$0-%U"; }
# When irssi expands the templates in "format", the final string would be:
#   hello %G%Uworld%U%n
# ie. underlined bright green "world" text.
# and why "$0-", why not "$0"? $0 would only mean the first parameter,
# $0- means all the parameters. With {underline hello world} you'd really
# want to underline both of the words, not just the hello (and world would
# actually be removed entirely).

# COLORS:

# You can find definitions for the color format codes in docs/formats.txt.

# There's one difference here though. %n format. Normally it means the
# default color of the terminal (white mostly), but here it means the
# "reset color back to the one it was in higher template". For example
# if there was /FORMAT test %g{foo}bar, and foo = "%Y$0%n", irssi would
# print yellow "foo" (as set with %Y) but "bar" would be green, which was
# set at the beginning before the {foo} template. If there wasn't the %g
# at start, the normal behaviour of %n would occur. If you _really_ want
# to use the terminal's default color, use %N.

#############################################################################

# default foreground color (%N) - 0 is the "default terminal color" 
default_color = 0;

# default foreground color when "0" can't be used,
# such as with bolds and reverses. white is default.
default_real_color = 7;

# these characters are automatically replaced with specified color
# (dark grey by default)
replaces = {};

abstracts = {
  ##
  ## generic
  ##

  # text to insert at the beginning of each non-message line
  line_start = "*** ";

  # timestamp styling, nothing by default
  timestamp = "[$0-]";

  # any kind of text that needs hilighting, default is to bold
  hilight = "%_$0-%_";

  # any kind of error message, default is bright red
  error = "%R$0-%n";

  # channel name is printed
  channel = "%c$0-%n";

  # nick is printed
  nick = "%c$0-%n";

  # nick host is printed
  nickhost = "($0-)";

  # server name is printed
  server = "$0-";

  # some kind of comment is printed
  comment = "($0-)";

  # reason for something is printed (part, quit, kick, ..)
  reason = "{comment $0-}";

  # mode change is printed
  mode = "[$0-]";

  ##
  ## channel specific messages
  ##

  # highlighted nick/host is printed (joins)
  channick_hilight = "%c$0-%n";
  chanhost_hilight = "{nickhost %c$0-%n}";

  # nick/host is printed (parts, quits, etc.)
  channick = "$0-";
  chanhost = "{nickhost $0-}";

  # highlighted channel name is printed
  channelhilight = "%c$0-%n";

  # ban/ban exception/invite list mask is printed
  ban = "$0-";

  ##
  ## Action (/ME command)
  ##

  # Generic action
  action = "%Y* $0-";

  # Own sent action
  ownaction = "%c* $0-";

  ##
  ## Notice (/NOTICE command)
  ##

  # Generic notice
  notice = "%C- $0-";

  # Own sent notice
  ownnotice = "%g- $0";


  ##
  ## messages
  ##

  # the basic styling of how to print message, $0 = nick mode, $1 = nick
  msgnick = "%c%|<$0$1->%n ";

  # message from you is printed. "msgownnick" specifies the styling of the
  # nick ($0 part in msgnick) and "ownmsgnick" specifies the styling of the
  # whole line.

  # Example1: You want the message text to be green:
  #  ownmsgnick = "{msgnick $0 $1-}%g";
  # Example2.1: You want < and > chars to be yellow:
  #  ownmsgnick = "%Y{msgnick $0 $1-%Y}%n";
  #  (you'll also have to remove <> from replaces list above)
  # Example2.2: But you still want to keep <> grey for other messages:
  #  pubmsgnick = "%K{msgnick $0 $1-%K}%n";
  #  pubmsgmenick = "%K{msgnick $0 $1-%K}%n";
  #  pubmsghinick = "%K{msgnick $1 $0$2-%K}%n";
  #  ownprivmsgnick = "%K{msgnick  $0-%K}%n";
  #  privmsgnick = "%K{msgnick  %R$0-%K}%n";

  # $0 = nick mode, $1 = nick
  ownmsgnick = "{msgnick $0 $1-}%g";
  ownnick = "$0-";

  # public message in channel, $0 = nick mode, $1 = nick
  pubmsgnick = "{msgnick $0 $1-}";
  pubnick = "$0-";

  # public message in channel meant for me, $0 = nick mode, $1 = nick
  pubmsgmenick = "%g<$0$1->%n %|";
  menick = "$0-";

  # public highlighted message in channel
  # $0 = highlight color, $1 = nick mode, $2 = nick
  pubmsghinick = "{msgnick $1 $2-}$0";

  # channel name is printed with message
  msgchannel = "%w|%c$0-";

  # private message, $0 = nick, $1 = host
  privmsg = "*%c$0%n* ";

  # private message from you, $0 = "msg", $1 = target nick
  ownprivmsg = "->*%c$1-%n* %g";

  # own private message in query
  ownprivmsgnick = "{msgnick  $0-}%g";
  ownprivnick = "$0-";

  # private message in query
  privmsgnick = "{msgnick  $0-%n}";


  ##
  ## other IRC events
  ##

  # CTCPs
  ownctcp = "[$0$1-] ";
  ctcp = "$0-";

  # wallops
  wallop = "$0-: ";
  wallop_nick = "$0-";
  wallop_action = " * $0- ";

  # netsplits
  netsplit = "%c$0-%n";
  netjoin = "%C$0-%n";

  # /names list
  names_nick = "[ %n%_$0%_$1- ] ";
  names_users = "$0-";
  names_channel = "{channel $0-}";

  # DCC
  dcc = "$0-";
  dccfile = "%_$0-%_";

  # DCC chat, own msg/action
  dccownmsg = "*%c=$1-%n*> %g";
  dccownaction = "{action $0-}";
  dccownaction_target = "{ownaction_target $0-}";

  # DCC chat, others
  dccmsg = "*%c=$1-%n* ";
  dccquerynick = "$0-";
  dccaction = " (*dcc*) $0- %|";

  ##
  ## statusbar
  ##

  # background of statusbar
  sb_background = "%4";

  # default statusbar item style
  sb = "%c[%n$0-%c]%n";

  sbmode = "(%c+%n$0-)";
  sbaway = " (%GzZzZ%n)";
  sbservertag = "%c:%n$0 (change with ^X)";
  sbmore = "%_-- more --%_";
  sblag = "{sb Lag: $0-}";
  sbmail = "{sb Mail: $0-}";

  # activity. Det is used for hilights when display doesn't support colors
  sbact = "{sb {sbact_act $0}{sbact_det $1}}";
  sbact_act = "Act: $0-";
  sbact_det = " Det: $0-";

};

#
# Some default formats how to print stuff on screen
#
formats = {
  "fe-common/core" = {
    endofnames = "{channel $0}: Total of {hilight $1} nicks {comment {hilight $2} ops, {hilight $4} normal}";
    line_start_irssi = "{line_start}";
  };
};