+++ /dev/null
-% texinfo.tex -- TeX macros to handle Texinfo files.
-%
-% Load plain if necessary, i.e., if running under initex.
-\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
-%
-\def\texinfoversion{2003-10-16.18}
-%
-% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-%
-% This texinfo.tex file is free software; you can redistribute it and/or
-% modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation; either version 2, or (at
-% your option) any later version.
-%
-% This texinfo.tex file is distributed in the hope that it will be
-% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-% General Public License for more details.
-%
-% You should have received a copy of the GNU General Public License
-% along with this texinfo.tex file; see the file COPYING. If not, write
-% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-% Boston, MA 02111-1307, USA.
-%
-% In other words, you are welcome to use, share and improve this program.
-% You are forbidden to forbid anyone else to use, share and improve
-% what you give them. Help stamp out software-hoarding!
-%
-% Please try the latest version of texinfo.tex before submitting bug
-% reports; you can get the latest version from:
-% ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex
-% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
-% ftp://tug.org/tex/texinfo.tex
-% (and all CTAN mirrors, see http://www.ctan.org),
-% and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
-%
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-%
-% The texinfo.tex in any given Texinfo distribution could well be out
-% of date, so if that's what you're using, please check.
-%
-% Send bug reports to bug-texinfo@gnu.org. Please include including a
-% complete document in each bug report with which we can reproduce the
-% problem. Patches are, of course, greatly appreciated.
-%
-% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution. For a simple
-% manual foo.texi, however, you can get away with this:
-% tex foo.texi
-% texindex foo.??
-% tex foo.texi
-% tex foo.texi
-% dvips foo.dvi -o # or whatever; this makes foo.ps.
-% The extra TeX runs get the cross-reference information correct.
-% Sometimes one run after texindex suffices, and sometimes you need more
-% than two; texi2dvi does it as many times as necessary.
-%
-% It is possible to adapt texinfo.tex for other languages, to some
-% extent. You can get the existing language-specific files from the
-% full Texinfo distribution.
-
-\message{Loading texinfo [version \texinfoversion]:}
-
-% If in a .fmt file, print the version number
-% and turn on active characters that we couldn't do earlier because
-% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}%
- \catcode`+=\active \catcode`\_=\active}
-
-\message{Basics,}
-\chardef\other=12
-
-% We never want plain's \outer definition of \+ in Texinfo.
-% For @tex, we can use \tabalign.
-\let\+ = \relax
-
-% Save some plain tex macros whose names we will redefine.
-\let\ptexb=\b
-\let\ptexbullet=\bullet
-\let\ptexc=\c
-\let\ptexcomma=\,
-\let\ptexdot=\.
-\let\ptexdots=\dots
-\let\ptexend=\end
-\let\ptexequiv=\equiv
-\let\ptexexclam=\!
-\let\ptexgtr=>
-\let\ptexhat=^
-\let\ptexi=\i
-\let\ptexindent=\indent
-\let\ptexnoindent=\noindent
-\let\ptexlbrace=\{
-\let\ptexless=<
-\let\ptexplus=+
-\let\ptexrbrace=\}
-\let\ptexslash=\/
-\let\ptexstar=\*
-\let\ptext=\t
-
-% If this character appears in an error message or help string, it
-% starts a new line in the output.
-\newlinechar = `^^J
-
-% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
-\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
-\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
-\ifx\putwordin\undefined \gdef\putwordin{in}\fi
-\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
-\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
-\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
-\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
-\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
-\ifx\putwordof\undefined \gdef\putwordof{of}\fi
-\ifx\putwordon\undefined \gdef\putwordon{on}\fi
-\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
-\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
-\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
-\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
-\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
-\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
-\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
-%
-\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
-\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
-\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
-\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
-\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
-\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
-\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
-\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
-\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
-\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
-\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
-\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
-%
-\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
-\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
-\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
-\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
-\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
-\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
-\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
-
-% In some macros, we cannot use the `\? notation---the left quote is
-% in some cases the escape char.
-\chardef\colonChar = `\:
-\chardef\commaChar = `\,
-\chardef\dotChar = `\.
-\chardef\equalChar = `\=
-\chardef\exclamChar= `\!
-\chardef\questChar = `\?
-\chardef\semiChar = `\;
-\chardef\spaceChar = `\ %
-\chardef\underChar = `\_
-
-% Ignore a token.
-%
-\def\gobble#1{}
-
-% Hyphenation fixes.
-\hyphenation{ap-pen-dix}
-\hyphenation{eshell}
-\hyphenation{mini-buf-fer mini-buf-fers}
-\hyphenation{time-stamp}
-\hyphenation{white-space}
-
-% Margin to add to right of even pages, to left of odd pages.
-\newdimen\bindingoffset
-\newdimen\normaloffset
-\newdimen\pagewidth \newdimen\pageheight
-
-% Sometimes it is convenient to have everything in the transcript file
-% and nothing on the terminal. We don't just call \tracingall here,
-% since that produces some useless output on the terminal. We also make
-% some effort to order the tracing commands to reduce output in the log
-% file; cf. trace.sty in LaTeX.
-%
-\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
-\def\loggingall{%
- \tracingstats2
- \tracingpages1
- \tracinglostchars2 % 2 gives us more in etex
- \tracingparagraphs1
- \tracingoutput1
- \tracingmacros2
- \tracingrestores1
- \showboxbreadth\maxdimen \showboxdepth\maxdimen
- \ifx\eTeXversion\undefined\else % etex gives us more logging
- \tracingscantokens1
- \tracingifs1
- \tracinggroups1
- \tracingnesting2
- \tracingassigns1
- \fi
- \tracingcommands3 % 3 gives us more in etex
- \errorcontextlines\maxdimen
-}%
-
-% add check for \lastpenalty to plain's definitions. If the last thing
-% we did was a \nobreak, we don't want to insert more space.
-%
-\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
- \removelastskip\penalty-50\smallskip\fi\fi}
-\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
- \removelastskip\penalty-100\medskip\fi\fi}
-\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
- \removelastskip\penalty-200\bigskip\fi\fi}
-
-% For @cropmarks command.
-% Do @cropmarks to get crop marks.
-%
-\newif\ifcropmarks
-\let\cropmarks = \cropmarkstrue
-%
-% Dimensions to add cropmarks at corners.
-% Added by P. A. MacKay, 12 Nov. 1986
-%
-\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
-\newdimen\cornerlong \cornerlong=1pc
-\newdimen\cornerthick \cornerthick=.3pt
-\newdimen\topandbottommargin \topandbottommargin=.75in
-
-% Main output routine.
-\chardef\PAGE = 255
-\output = {\onepageout{\pagecontents\PAGE}}
-
-\newbox\headlinebox
-\newbox\footlinebox
-
-% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions, but you have to call it yourself.
-\def\onepageout#1{%
- \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
- %
- \ifodd\pageno \advance\hoffset by \bindingoffset
- \else \advance\hoffset by -\bindingoffset\fi
- %
- % Do this outside of the \shipout so @code etc. will be expanded in
- % the headline as they should be, not taken literally (outputting ''code).
- \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
- \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
- %
- {%
- % Have to do this stuff outside the \shipout because we want it to
- % take effect in \write's, yet the group defined by the \vbox ends
- % before the \shipout runs.
- %
- \escapechar = `\\ % use backslash in output files.
- \indexdummies % don't expand commands in the output.
- \normalturnoffactive % \ in index entries must not stay \, e.g., if
- % the page break happens to be in the middle of an example.
- \shipout\vbox{%
- % Do this early so pdf references go to the beginning of the page.
- \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
- %
- \ifcropmarks \vbox to \outervsize\bgroup
- \hsize = \outerhsize
- \vskip-\topandbottommargin
- \vtop to0pt{%
- \line{\ewtop\hfil\ewtop}%
- \nointerlineskip
- \line{%
- \vbox{\moveleft\cornerthick\nstop}%
- \hfill
- \vbox{\moveright\cornerthick\nstop}%
- }%
- \vss}%
- \vskip\topandbottommargin
- \line\bgroup
- \hfil % center the page within the outer (page) hsize.
- \ifodd\pageno\hskip\bindingoffset\fi
- \vbox\bgroup
- \fi
- %
- \unvbox\headlinebox
- \pagebody{#1}%
- \ifdim\ht\footlinebox > 0pt
- % Only leave this space if the footline is nonempty.
- % (We lessened \vsize for it in \oddfootingxxx.)
- % The \baselineskip=24pt in plain's \makefootline has no effect.
- \vskip 2\baselineskip
- \unvbox\footlinebox
- \fi
- %
- \ifcropmarks
- \egroup % end of \vbox\bgroup
- \hfil\egroup % end of (centering) \line\bgroup
- \vskip\topandbottommargin plus1fill minus1fill
- \boxmaxdepth = \cornerthick
- \vbox to0pt{\vss
- \line{%
- \vbox{\moveleft\cornerthick\nsbot}%
- \hfill
- \vbox{\moveright\cornerthick\nsbot}%
- }%
- \nointerlineskip
- \line{\ewbot\hfil\ewbot}%
- }%
- \egroup % \vbox from first cropmarks clause
- \fi
- }% end of \shipout\vbox
- }% end of group with \normalturnoffactive
- \advancepageno
- \ifnum\outputpenalty>-20000 \else\dosupereject\fi
-}
-
-\newinsert\margin \dimen\margin=\maxdimen
-
-\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
-{\catcode`\@ =11
-\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
-% marginal hacks, juha@viisa.uucp (Juha Takala)
-\ifvoid\margin\else % marginal info is present
- \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1 \unvbox#1
-\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
-\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
-}
-
-% Here are the rules for the cropmarks. Note that they are
-% offset so that the space between them is truly \outerhsize or \outervsize
-% (P. A. MacKay, 12 November, 1986)
-%
-\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
-\def\nstop{\vbox
- {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
-\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
-\def\nsbot{\vbox
- {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
-
-% Parse an argument, then pass it to #1. The argument is the rest of
-% the input line (except we remove a trailing comment). #1 should be a
-% macro which expects an ordinary undelimited TeX argument.
-%
-\def\parsearg#1{%
- \let\next = #1%
- \begingroup
- \obeylines
- \futurelet\temp\parseargx
-}
-
-% If the next token is an obeyed space (from an @example environment or
-% the like), remove it and recurse. Otherwise, we're done.
-\def\parseargx{%
- % \obeyedspace is defined far below, after the definition of \sepspaces.
- \ifx\obeyedspace\temp
- \expandafter\parseargdiscardspace
- \else
- \expandafter\parseargline
- \fi
-}
-
-% Remove a single space (as the delimiter token to the macro call).
-{\obeyspaces %
- \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
-
-{\obeylines %
- \gdef\parseargline#1^^M{%
- \endgroup % End of the group started in \parsearg.
- %
- % First remove any @c comment, then any @comment.
- % Result of each macro is put in \toks0.
- \argremovec #1\c\relax %
- \expandafter\argremovecomment \the\toks0 \comment\relax %
- %
- % Call the caller's macro, saved as \next in \parsearg.
- \expandafter\next\expandafter{\the\toks0}%
- }%
-}
-
-% Since all \c{,omment} does is throw away the argument, we can let TeX
-% do that for us. The \relax here is matched by the \relax in the call
-% in \parseargline; it could be more or less anything, its purpose is
-% just to delimit the argument to the \c.
-\def\argremovec#1\c#2\relax{\toks0 = {#1}}
-\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
-
-% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
-% @end itemize @c foo
-% will have two active spaces as part of the argument with the
-% `itemize'. Here we remove all active spaces from #1, and assign the
-% result to \toks0.
-%
-% This loses if there are any *other* active characters besides spaces
-% in the argument -- _ ^ +, for example -- since they get expanded.
-% Fortunately, Texinfo does not define any such commands. (If it ever
-% does, the catcode of the characters in questionwill have to be changed
-% here.) But this means we cannot call \removeactivespaces as part of
-% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
-% that \parsearg gets might well have any character at all in it.
-%
-\def\removeactivespaces#1{%
- \begingroup
- \ignoreactivespaces
- \edef\temp{#1}%
- \global\toks0 = \expandafter{\temp}%
- \endgroup
-}
-
-% Change the active space to expand to nothing.
-%
-\begingroup
- \obeyspaces
- \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
-\endgroup
-
-
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
-
-%% These are used to keep @begin/@end levels from running away
-%% Call \inENV within environments (after a \begingroup)
-\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
-\def\ENVcheck{%
-\ifENV\errmessage{Still within an environment; press RETURN to continue}
-\endgroup\fi} % This is not perfect, but it should reduce lossage
-
-% @begin foo is the same as @foo, for now.
-\newhelp\EMsimple{Press RETURN to continue.}
-
-\outer\def\begin{\parsearg\beginxxx}
-
-\def\beginxxx #1{%
-\expandafter\ifx\csname #1\endcsname\relax
-{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
-\csname #1\endcsname\fi}
-
-% @end foo executes the definition of \Efoo.
-%
-\def\end{\parsearg\endxxx}
-\def\endxxx #1{%
- \removeactivespaces{#1}%
- \edef\endthing{\the\toks0}%
- %
- \expandafter\ifx\csname E\endthing\endcsname\relax
- \expandafter\ifx\csname \endthing\endcsname\relax
- % There's no \foo, i.e., no ``environment'' foo.
- \errhelp = \EMsimple
- \errmessage{Undefined command `@end \endthing'}%
- \else
- \unmatchedenderror\endthing
- \fi
- \else
- % Everything's ok; the right environment has been started.
- \csname E\endthing\endcsname
- \fi
-}
-
-% There is an environment #1, but it hasn't been started. Give an error.
-%
-\def\unmatchedenderror#1{%
- \errhelp = \EMsimple
- \errmessage{This `@end #1' doesn't have a matching `@#1'}%
-}
-
-% Define the control sequence \E#1 to give an unmatched @end error.
-%
-\def\defineunmatchedend#1{%
- \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
-}
-
-
-%% Simple single-character @ commands
-
-% @@ prints an @
-% Kludge this until the fonts are right (grr).
-\def\@{{\tt\char64}}
-
-% This is turned off because it was never documented
-% and you can use @w{...} around a quote to suppress ligatures.
-%% Define @` and @' to be the same as ` and '
-%% but suppressing ligatures.
-%\def\`{{`}}
-%\def\'{{'}}
-
-% Used to generate quoted braces.
-\def\mylbrace {{\tt\char123}}
-\def\myrbrace {{\tt\char125}}
-\let\{=\mylbrace
-\let\}=\myrbrace
-\begingroup
- % Definitions to produce \{ and \} commands for indices,
- % and @{ and @} for the aux file.
- \catcode`\{ = \other \catcode`\} = \other
- \catcode`\[ = 1 \catcode`\] = 2
- \catcode`\! = 0 \catcode`\\ = \other
- !gdef!lbracecmd[\{]%
- !gdef!rbracecmd[\}]%
- !gdef!lbraceatcmd[@{]%
- !gdef!rbraceatcmd[@}]%
-!endgroup
-
-% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
-% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
-\let\, = \c
-\let\dotaccent = \.
-\def\ringaccent#1{{\accent23 #1}}
-\let\tieaccent = \t
-\let\ubaraccent = \b
-\let\udotaccent = \d
-
-% Other special characters: @questiondown @exclamdown
-% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
-\def\questiondown{?`}
-\def\exclamdown{!`}
-
-% Dotless i and dotless j, used for accents.
-\def\imacro{i}
-\def\jmacro{j}
-\def\dotless#1{%
- \def\temp{#1}%
- \ifx\temp\imacro \ptexi
- \else\ifx\temp\jmacro \j
- \else \errmessage{@dotless can be used only with i or j}%
- \fi\fi
-}
-
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- % Avoid using \@M directly, because that causes trouble
- % if the definition is written into an index file.
- \global\let\tiepenalty = \@M
- \gdef\tie{\leavevmode\penalty\tiepenalty\ }
-}
-
-% @: forces normal size whitespace following.
-\def\:{\spacefactor=1000 }
-
-% @* forces a line break.
-\def\*{\hfil\break\hbox{}\ignorespaces}
-
-% @/ allows a line break.
-\let\/=\allowbreak
-
-% @. is an end-of-sentence period.
-\def\.{.\spacefactor=3000 }
-
-% @! is an end-of-sentence bang.
-\def\!{!\spacefactor=3000 }
-
-% @? is an end-of-sentence query.
-\def\?{?\spacefactor=3000 }
-
-% @w prevents a word break. Without the \leavevmode, @w at the
-% beginning of a paragraph, when TeX is still in vertical mode, would
-% produce a whole line of output instead of starting the paragraph.
-\def\w#1{\leavevmode\hbox{#1}}
-
-% @group ... @end group forces ... to be all on one page, by enclosing
-% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
-% to keep its height that of a normal line. According to the rules for
-% \topskip (p.114 of the TeXbook), the glue inserted is
-% max (\topskip - \ht (first item), 0). If that height is large,
-% therefore, no glue is inserted, and the space between the headline and
-% the text is small, which looks bad.
-%
-% Another complication is that the group might be very large. This can
-% cause the glue on the previous page to be unduly stretched, because it
-% does not have much material. In this case, it's better to add an
-% explicit \vfill so that the extra space is at the bottom. The
-% threshold for doing this is if the group is more than \vfilllimit
-% percent of a page (\vfilllimit can be changed inside of @tex).
-%
-\newbox\groupbox
-\def\vfilllimit{0.7}
-%
-\def\group{\begingroup
- \ifnum\catcode13=\active \else
- \errhelp = \groupinvalidhelp
- \errmessage{@group invalid in context where filling is enabled}%
- \fi
- %
- % The \vtop we start below produces a box with normal height and large
- % depth; thus, TeX puts \baselineskip glue before it, and (when the
- % next line of text is done) \lineskip glue after it. (See p.82 of
- % the TeXbook.) Thus, space below is not quite equal to space
- % above. But it's pretty close.
- \def\Egroup{%
- \egroup % End the \vtop.
- % \dimen0 is the vertical size of the group's box.
- \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
- % \dimen2 is how much space is left on the page (more or less).
- \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
- % if the group doesn't fit on the current page, and it's a big big
- % group, force a page break.
- \ifdim \dimen0 > \dimen2
- \ifdim \pagetotal < \vfilllimit\pageheight
- \page
- \fi
- \fi
- \copy\groupbox
- \endgroup % End the \group.
- }%
- %
- \setbox\groupbox = \vtop\bgroup
- % We have to put a strut on the last line in case the @group is in
- % the midst of an example, rather than completely enclosing it.
- % Otherwise, the interline space between the last line of the group
- % and the first line afterwards is too small. But we can't put the
- % strut in \Egroup, since there it would be on a line by itself.
- % Hence this just inserts a strut at the beginning of each line.
- \everypar = {\strut}%
- %
- % Since we have a strut on every line, we don't need any of TeX's
- % normal interline spacing.
- \offinterlineskip
- %
- % OK, but now we have to do something about blank
- % lines in the input in @example-like environments, which normally
- % just turn into \lisppar, which will insert no space now that we've
- % turned off the interline space. Simplest is to make them be an
- % empty paragraph.
- \ifx\par\lisppar
- \edef\par{\leavevmode \par}%
- %
- % Reset ^^M's definition to new definition of \par.
- \obeylines
- \fi
- %
- % Do @comment since we are called inside an environment such as
- % @example, where each end-of-line in the input causes an
- % end-of-line in the output. We don't want the end-of-line after
- % the `@group' to put extra space in the output. Since @group
- % should appear on a line by itself (according to the Texinfo
- % manual), we don't worry about eating any user text.
- \comment
-}
-%
-% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
-% message, so this ends up printing `@group can only ...'.
-%
-\newhelp\groupinvalidhelp{%
-group can only be used in environments such as @example,^^J%
-where each line of input produces a line of output.}
-
-% @need space-in-mils
-% forces a page break if there is not space-in-mils remaining.
-
-\newdimen\mil \mil=0.001in
-
-\def\need{\parsearg\needx}
-
-% Old definition--didn't work.
-%\def\needx #1{\par %
-%% This method tries to make TeX break the page naturally
-%% if the depth of the box does not fit.
-%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
-%\prevdepth=-1000pt
-%}}
-
-\def\needx#1{%
- % Ensure vertical mode, so we don't make a big box in the middle of a
- % paragraph.
- \par
- %
- % If the @need value is less than one line space, it's useless.
- \dimen0 = #1\mil
- \dimen2 = \ht\strutbox
- \advance\dimen2 by \dp\strutbox
- \ifdim\dimen0 > \dimen2
- %
- % Do a \strut just to make the height of this box be normal, so the
- % normal leading is inserted relative to the preceding line.
- % And a page break here is fine.
- \vtop to #1\mil{\strut\vfil}%
- %
- % TeX does not even consider page breaks if a penalty added to the
- % main vertical list is 10000 or more. But in order to see if the
- % empty box we just added fits on the page, we must make it consider
- % page breaks. On the other hand, we don't want to actually break the
- % page after the empty box. So we use a penalty of 9999.
- %
- % There is an extremely small chance that TeX will actually break the
- % page at this \penalty, if there are no other feasible breakpoints in
- % sight. (If the user is using lots of big @group commands, which
- % almost-but-not-quite fill up a page, TeX will have a hard time doing
- % good page breaking, for example.) However, I could not construct an
- % example where a page broke at this \penalty; if it happens in a real
- % document, then we can reconsider our strategy.
- \penalty9999
- %
- % Back up by the size of the box, whether we did a page break or not.
- \kern -#1\mil
- %
- % Do not allow a page break right after this kern.
- \nobreak
- \fi
-}
-
-% @br forces paragraph break
-
-\let\br = \par
-
-% @dots{} output an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
-%
-\def\dots{%
- \leavevmode
- \hbox to 1.5em{%
- \hskip 0pt plus 0.25fil minus 0.25fil
- .\hss.\hss.%
- \hskip 0pt plus 0.5fil minus 0.5fil
- }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
- \leavevmode
- \hbox to 2em{%
- \hskip 0pt plus 0.25fil minus 0.25fil
- .\hss.\hss.\hss.%
- \hskip 0pt plus 0.5fil minus 0.5fil
- }%
- \spacefactor=3000
-}
-
-% @page forces the start of a new page.
-%
-\def\page{\par\vfill\supereject}
-
-% @exdent text....
-% outputs text on separate line in roman font, starting at standard page margin
-
-% This records the amount of indent in the innermost environment.
-% That's how much \exdent should take out.
-\newskip\exdentamount
-
-% This defn is used inside fill environments such as @defun.
-\def\exdent{\parsearg\exdentyyy}
-\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
-
-% This defn is used inside nofill environments such as @example.
-\def\nofillexdent{\parsearg\nofillexdentyyy}
-\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
-\leftline{\hskip\leftskip{\rm#1}}}}
-
-% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
-% paragraph. For more general purposes, use the \margin insertion
-% class. WHICH is `l' or `r'.
-%
-\newskip\inmarginspacing \inmarginspacing=1cm
-\def\strutdepth{\dp\strutbox}
-%
-\def\doinmargin#1#2{\strut\vadjust{%
- \nobreak
- \kern-\strutdepth
- \vtop to \strutdepth{%
- \baselineskip=\strutdepth
- \vss
- % if you have multiple lines of stuff to put here, you'll need to
- % make the vbox yourself of the appropriate size.
- \ifx#1l%
- \llap{\ignorespaces #2\hskip\inmarginspacing}%
- \else
- \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
- \fi
- \null
- }%
-}}
-\def\inleftmargin{\doinmargin l}
-\def\inrightmargin{\doinmargin r}
-%
-% @inmargin{TEXT [, RIGHT-TEXT]}
-% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
-% else use TEXT for both).
-%
-\def\inmargin#1{\parseinmargin #1,,\finish}
-\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \def\lefttext{#1}% have both texts
- \def\righttext{#2}%
- \else
- \def\lefttext{#1}% have only one text
- \def\righttext{#1}%
- \fi
- %
- \ifodd\pageno
- \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
- \else
- \def\temp{\inleftmargin\lefttext}%
- \fi
- \temp
-}
-
-% @include file insert text of that file as input.
-% Allow normal characters that we make active in the argument (a file name).
-\def\include{\begingroup
- \catcode`\\=\other
- \catcode`~=\other
- \catcode`^=\other
- \catcode`_=\other
- \catcode`|=\other
- \catcode`<=\other
- \catcode`>=\other
- \catcode`+=\other
- \parsearg\includezzz}
-% Restore active chars for included file.
-\def\includezzz#1{\endgroup\begingroup
- % Read the included file in a group so nested @include's work.
- \def\thisfile{#1}%
- \let\value=\expandablevalue
- \input\thisfile
-\endgroup}
-
-\def\thisfile{}
-
-% @center line
-% outputs that line, centered.
-%
-\def\center{\parsearg\docenter}
-\def\docenter#1{{%
- \ifhmode \hfil\break \fi
- \advance\hsize by -\leftskip
- \advance\hsize by -\rightskip
- \line{\hfil \ignorespaces#1\unskip \hfil}%
- \ifhmode \break \fi
-}}
-
-% @sp n outputs n lines of vertical space
-
-\def\sp{\parsearg\spxxx}
-\def\spxxx #1{\vskip #1\baselineskip}
-
-% @comment ...line which is ignored...
-% @c is the same as @comment
-% @ignore ... @end ignore is another way to write a comment
-
-\def\comment{\begingroup \catcode`\^^M=\other%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
-\commentxxx}
-{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
-\let\c=\comment
-
-% @paragraphindent NCHARS
-% We'll use ems for NCHARS, close enough.
-% NCHARS can also be the word `asis' or `none'.
-% We cannot feasibly implement @paragraphindent asis, though.
-%
-\def\asisword{asis} % no translation, these are keywords
-\def\noneword{none}
-%
-\def\paragraphindent{\parsearg\doparagraphindent}
-\def\doparagraphindent#1{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \defaultparindent = 0pt
- \else
- \defaultparindent = #1em
- \fi
- \fi
- \parindent = \defaultparindent
-}
-
-% @exampleindent NCHARS
-% We'll use ems for NCHARS like @paragraphindent.
-% It seems @exampleindent asis isn't necessary, but
-% I preserve it to make it similar to @paragraphindent.
-\def\exampleindent{\parsearg\doexampleindent}
-\def\doexampleindent#1{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \lispnarrowing = 0pt
- \else
- \lispnarrowing = #1em
- \fi
- \fi
-}
-
-% @firstparagraphindent WORD
-% If WORD is `none', then suppress indentation of the first paragraph
-% after a section heading. If WORD is `insert', then do indent at such
-% paragraphs.
-%
-% The paragraph indentation is suppressed or not by calling
-% \suppressfirstparagraphindent, which the sectioning commands do.
-% We switch the definition of this back and forth according to WORD.
-% By default, we suppress indentation.
-%
-\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
-\newdimen\currentparindent
-%
-\def\insertword{insert}
-%
-\def\firstparagraphindent{\parsearg\dofirstparagraphindent}
-\def\dofirstparagraphindent#1{%
- \def\temp{#1}%
- \ifx\temp\noneword
- \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
- \else\ifx\temp\insertword
- \let\suppressfirstparagraphindent = \relax
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @firstparagraphindent option `\temp'}%
- \fi\fi
-}
-
-% Here is how we actually suppress indentation. Redefine \everypar to
-% \kern backwards by \parindent, and then reset itself to empty.
-%
-% We also make \indent itself not actually do anything until the next
-% paragraph.
-%
-\gdef\dosuppressfirstparagraphindent{%
- \gdef\indent{%
- \restorefirstparagraphindent
- \indent
- }%
- \gdef\noindent{%
- \restorefirstparagraphindent
- \noindent
- }%
- \global\everypar = {%
- \kern -\parindent
- \restorefirstparagraphindent
- }%
-}
-
-\gdef\restorefirstparagraphindent{%
- \global \let \indent = \ptexindent
- \global \let \noindent = \ptexnoindent
- \global \everypar = {}%
-}
-
-
-% @asis just yields its argument. Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math outputs its argument in math mode.
-% We don't use $'s directly in the definition of \math because we need
-% to set catcodes according to plain TeX first, to allow for subscripts,
-% superscripts, special math chars, etc.
-%
-\let\implicitmath = $%$ font-lock fix
-%
-% One complication: _ usually means subscripts, but it could also mean
-% an actual _ character, as in @math{@var{some_variable} + 1}. So make
-% _ within @math be active (mathcode "8000), and distinguish by seeing
-% if the current family is \slfam, which is what @var uses.
-%
-{\catcode\underChar = \active
-\gdef\mathunderscore{%
- \catcode\underChar=\active
- \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
-}}
-%
-% Another complication: we want \\ (and @\) to output a \ character.
-% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
-% this is not advertised and we don't care. Texinfo does not
-% otherwise define @\.
-%
-% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
-\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
-%
-\def\math{%
- \tex
- \mathcode`\_="8000 \mathunderscore
- \let\\ = \mathbackslash
- \mathactive
- \implicitmath\finishmath}
-\def\finishmath#1{#1\implicitmath\Etex}
-
-% Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an
-% argument to a command which set the catcodes (such as @item or @section).
-%
-{
- \catcode`^ = \active
- \catcode`< = \active
- \catcode`> = \active
- \catcode`+ = \active
- \gdef\mathactive{%
- \let^ = \ptexhat
- \let< = \ptexless
- \let> = \ptexgtr
- \let+ = \ptexplus
- }
-}
-
-% @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{\implicitmath\ptexbullet\implicitmath}
-\def\minus{\implicitmath-\implicitmath}
-
-% @refill is a no-op.
-\let\refill=\relax
-
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% @setfilename is done at the beginning of every texinfo file.
-% So open here the files we need to have open while reading the input.
-% This makes it possible to make a .fmt file for texinfo.
-\def\setfilename{%
- \iflinks
- \readauxfile
- \fi % \openindices needs to do some work in any case.
- \openindices
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
- \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- % Just to be on the safe side, close the input stream before the \input.
- \openin 1 texinfo.cnf
- \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
- \closein1
- \temp
- %
- \comment % Ignore the actual filename.
-}
-
-% Called from \setfilename.
-%
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
-}
-
-% @bye.
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-
-
-\message{pdf,}
-% adobe `portable' document format
-\newcount\tempnum
-\newcount\lnkcount
-\newtoks\filename
-\newcount\filenamelength
-\newcount\pgn
-\newtoks\toksA
-\newtoks\toksB
-\newtoks\toksC
-\newtoks\toksD
-\newbox\boxA
-\newcount\countA
-\newif\ifpdf
-\newif\ifpdfmakepagedest
-
-\ifx\pdfoutput\undefined
- \pdffalse
- \let\pdfmkdest = \gobble
- \let\pdfurl = \gobble
- \let\endlink = \relax
- \let\linkcolor = \relax
- \let\pdfmakeoutlines = \relax
-\else
- \pdftrue
- \pdfoutput = 1
- \input pdfcolor
- \pdfcatalog{/PageMode /UseOutlines}%
- \def\dopdfimage#1#2#3{%
- \def\imagewidth{#2}%
- \def\imageheight{#3}%
- % without \immediate, pdftex seg faults when the same image is
- % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
- \ifnum\pdftexversion < 14
- \immediate\pdfimage
- \else
- \immediate\pdfximage
- \fi
- \ifx\empty\imagewidth\else width \imagewidth \fi
- \ifx\empty\imageheight\else height \imageheight \fi
- \ifnum\pdftexversion<13
- #1.pdf%
- \else
- {#1.pdf}%
- \fi
- \ifnum\pdftexversion < 14 \else
- \pdfrefximage \pdflastximage
- \fi}
- \def\pdfmkdest#1{{%
- % We have to set dummies so commands such as @code in a section title
- % aren't expanded.
- \atdummies
- \normalturnoffactive
- \pdfdest name{#1} xyz%
- }}
- \def\pdfmkpgn#1{#1}
- \let\linkcolor = \Blue % was Cyan, but that seems light?
- \def\endlink{\Black\pdfendlink}
- % Adding outlines to PDF; macros for calculating structure of outlines
- % come from Petr Olsak
- \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
- \else \csname#1\endcsname \fi}
- \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
- \advance\tempnum by 1
- \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
- %
- % #1 is the section text. #2 is the pdf expression for the number
- % of subentries (or empty, for subsubsections). #3 is the node
- % text, which might be empty if this toc entry had no
- % corresponding node. #4 is the page number.
- %
- \def\dopdfoutline#1#2#3#4{%
- % Generate a link to the node text if that exists; else, use the
- % page number. We could generate a destination for the section
- % text in the case where a section has no node, but it doesn't
- % seem worthwhile, since most documents are normally structured.
- \def\pdfoutlinedest{#3}%
- \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi
- %
- \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
- }
- %
- \def\pdfmakeoutlines{%
- \openin 1 \jobname.toc
- \ifeof 1\else\begingroup
- \closein 1
- % Thanh's hack / proper braces in bookmarks
- \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
- \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
- %
- % Read toc silently, to get counts of subentries for \pdfoutline.
- \def\numchapentry##1##2##3##4{\def\thischapnum{##2}}%
- \def\numsecentry##1##2##3##4{%
- \def\thissecnum{##2}%
- \advancenumber{chap\thischapnum}}%
- \def\numsubsecentry##1##2##3##4{%
- \def\thissubsecnum{##2}%
- \advancenumber{sec\thissecnum}}%
- \def\numsubsubsecentry##1##2##3##4{\advancenumber{subsec\thissubsecnum}}%
- %
- % use \def rather than \let here because we redefine \chapentry et
- % al. a second time, below.
- \def\appentry{\numchapentry}%
- \def\appsecentry{\numsecentry}%
- \def\appsubsecentry{\numsubsecentry}%
- \def\appsubsubsecentry{\numsubsubsecentry}%
- \def\unnchapentry{\numchapentry}%
- \def\unnsecentry{\numsecentry}%
- \def\unnsubsecentry{\numsubsecentry}%
- \def\unnsubsubsecentry{\numsubsubsecentry}%
- \input \jobname.toc
- %
- % Read toc second time, this time actually producing the outlines.
- % The `-' means take the \expnumber as the absolute number of
- % subentries, which we calculated on our first read of the .toc above.
- %
- % We use the node names as the destinations.
- \def\numchapentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
- \def\numsecentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
- \def\numsubsecentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
- \def\numsubsubsecentry##1##2##3##4{% count is always zero
- \dopdfoutline{##1}{}{##3}{##4}}%
- %
- % Make special characters normal for writing to the pdf file.
- \indexnofonts
- \turnoffactive
- \input \jobname.toc
- \endgroup\fi
- }
- %
- \def\makelinks #1,{%
- \def\params{#1}\def\E{END}%
- \ifx\params\E
- \let\nextmakelinks=\relax
- \else
- \let\nextmakelinks=\makelinks
- \ifnum\lnkcount>0,\fi
- \picknum{#1}%
- \startlink attr{/Border [0 0 0]}
- goto name{\pdfmkpgn{\the\pgn}}%
- \linkcolor #1%
- \advance\lnkcount by 1%
- \endlink
- \fi
- \nextmakelinks
- }
- \def\picknum#1{\expandafter\pn#1}
- \def\pn#1{%
- \def\p{#1}%
- \ifx\p\lbrace
- \let\nextpn=\ppn
- \else
- \let\nextpn=\ppnn
- \def\first{#1}
- \fi
- \nextpn
- }
- \def\ppn#1{\pgn=#1\gobble}
- \def\ppnn{\pgn=\first}
- \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
- \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
- \def\skipspaces#1{\def\PP{#1}\def\D{|}%
- \ifx\PP\D\let\nextsp\relax
- \else\let\nextsp\skipspaces
- \ifx\p\space\else\addtokens{\filename}{\PP}%
- \advance\filenamelength by 1
- \fi
- \fi
- \nextsp}
- \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
- \ifnum\pdftexversion < 14
- \let \startlink \pdfannotlink
- \else
- \let \startlink \pdfstartlink
- \fi
- \def\pdfurl#1{%
- \begingroup
- \normalturnoffactive\def\@{@}%
- \let\value=\expandablevalue
- \leavevmode\Red
- \startlink attr{/Border [0 0 0]}%
- user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
- % #1
- \endgroup}
- \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
- \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
- \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
- \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
- \def\maketoks{%
- \expandafter\poptoks\the\toksA|ENDTOKS|
- \ifx\first0\adn0
- \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
- \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
- \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
- \else
- \ifnum0=\countA\else\makelink\fi
- \ifx\first.\let\next=\done\else
- \let\next=\maketoks
- \addtokens{\toksB}{\the\toksD}
- \ifx\first,\addtokens{\toksB}{\space}\fi
- \fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \next}
- \def\makelink{\addtokens{\toksB}%
- {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
- \def\pdflink#1{%
- \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
- \linkcolor #1\endlink}
- \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\fi % \ifx\pdfoutput
-
-
-\message{fonts,}
-% Font-change commands.
-
-% Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf analogous to plain's \rm, etc.
-\newfam\sffam
-\def\sf{\fam=\sffam \tensf}
-\let\li = \sf % Sometimes we call it \li, not \sf.
-
-% We don't need math for this one.
-\def\ttsl{\tenttsl}
-
-% Default leading.
-\newdimen\textleading \textleading = 13.2pt
-
-% Set the baselineskip to #1, and the lineskip and strut size
-% correspondingly. There is no deep meaning behind these magic numbers
-% used as factors; they just match (closely enough) what Knuth defined.
-%
-\def\lineskipfactor{.08333}
-\def\strutheightpercent{.70833}
-\def\strutdepthpercent {.29167}
-%
-\def\setleading#1{%
- \normalbaselineskip = #1\relax
- \normallineskip = \lineskipfactor\normalbaselineskip
- \normalbaselines
- \setbox\strutbox =\hbox{%
- \vrule width0pt height\strutheightpercent\baselineskip
- depth \strutdepthpercent \baselineskip
- }%
-}
-
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
-% #3 is the font's design size, #4 is a scale factor
-\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
-
-% Use cm as the default font prefix.
-% To specify the font prefix, you must define \fontprefix
-% before you read in texinfo.tex.
-\ifx\fontprefix\undefined
-\def\fontprefix{cm}
-\fi
-% Support font families that don't use the same naming scheme as CM.
-\def\rmshape{r}
-\def\rmbshape{bx} %where the normal face is bold
-\def\bfshape{b}
-\def\bxshape{bx}
-\def\ttshape{tt}
-\def\ttbshape{tt}
-\def\ttslshape{sltt}
-\def\itshape{ti}
-\def\itbshape{bxti}
-\def\slshape{sl}
-\def\slbshape{bxsl}
-\def\sfshape{ss}
-\def\sfbshape{ss}
-\def\scshape{csc}
-\def\scbshape{csc}
-
-\newcount\mainmagstep
-\ifx\bigger\relax
- % not really supported.
- \mainmagstep=\magstep1
- \setfont\textrm\rmshape{12}{1000}
- \setfont\texttt\ttshape{12}{1000}
-\else
- \mainmagstep=\magstephalf
- \setfont\textrm\rmshape{10}{\mainmagstep}
- \setfont\texttt\ttshape{10}{\mainmagstep}
-\fi
-\setfont\textbf\bfshape{10}{\mainmagstep}
-\setfont\textit\itshape{10}{\mainmagstep}
-\setfont\textsl\slshape{10}{\mainmagstep}
-\setfont\textsf\sfshape{10}{\mainmagstep}
-\setfont\textsc\scshape{10}{\mainmagstep}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-
-% A few fonts for @defun, etc.
-\setfont\defbf\bfshape{10}{\magstep1}
-\setfont\deftt\ttshape{10}{\magstep1}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
-
-% Fonts for indices, footnotes, small examples (9pt).
-\setfont\smallrm\rmshape{9}{1000}
-\setfont\smalltt\ttshape{9}{1000}
-\setfont\smallbf\bfshape{10}{900}
-\setfont\smallit\itshape{9}{1000}
-\setfont\smallsl\slshape{9}{1000}
-\setfont\smallsf\sfshape{9}{1000}
-\setfont\smallsc\scshape{10}{900}
-\setfont\smallttsl\ttslshape{10}{900}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
-
-% Fonts for small examples (8pt).
-\setfont\smallerrm\rmshape{8}{1000}
-\setfont\smallertt\ttshape{8}{1000}
-\setfont\smallerbf\bfshape{10}{800}
-\setfont\smallerit\itshape{8}{1000}
-\setfont\smallersl\slshape{8}{1000}
-\setfont\smallersf\sfshape{8}{1000}
-\setfont\smallersc\scshape{10}{800}
-\setfont\smallerttsl\ttslshape{10}{800}
-\font\smalleri=cmmi8
-\font\smallersy=cmsy8
-
-% Fonts for title page:
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\setfont\titleit\itbshape{10}{\magstep4}
-\setfont\titlesl\slbshape{10}{\magstep4}
-\setfont\titlett\ttbshape{12}{\magstep3}
-\setfont\titlettsl\ttslshape{10}{\magstep4}
-\setfont\titlesf\sfbshape{17}{\magstep1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
-
-% Chapter (and unnumbered) fonts (17.28pt).
-\setfont\chaprm\rmbshape{12}{\magstep2}
-\setfont\chapit\itbshape{10}{\magstep3}
-\setfont\chapsl\slbshape{10}{\magstep3}
-\setfont\chaptt\ttbshape{12}{\magstep2}
-\setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{17}{1000}
-\let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}
-\font\chapi=cmmi12 scaled \magstep2
-\font\chapsy=cmsy10 scaled \magstep3
-
-% Section fonts (14.4pt).
-\setfont\secrm\rmbshape{12}{\magstep1}
-\setfont\secit\itbshape{10}{\magstep2}
-\setfont\secsl\slbshape{10}{\magstep2}
-\setfont\sectt\ttbshape{12}{\magstep1}
-\setfont\secttsl\ttslshape{10}{\magstep2}
-\setfont\secsf\sfbshape{12}{\magstep1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}
-\font\seci=cmmi12 scaled \magstep1
-\font\secsy=cmsy10 scaled \magstep2
-
-% Subsection fonts (13.15pt).
-\setfont\ssecrm\rmbshape{12}{\magstephalf}
-\setfont\ssecit\itbshape{10}{1315}
-\setfont\ssecsl\slbshape{10}{1315}
-\setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{1315}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{\magstep1}
-\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled 1315
-% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
-% but that is not a standard magnification.
-
-% In order for the font changes to affect most math symbols and letters,
-% we have to define the \textfont of the standard families. Since
-% texinfo doesn't allow for producing subscripts and superscripts except
-% in the main text, we don't bother to reset \scriptfont and
-% \scriptscriptfont (which would also require loading a lot more fonts).
-%
-\def\resetmathfonts{%
- \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
- \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
- \textfont\ttfam=\tentt \textfont\sffam=\tensf
-}
-
-% The font-changing commands redefine the meanings of \tenSTYLE, instead
-% of just \STYLE. We do this so that font changes will continue to work
-% in math mode, where it is the current \fam that is relevant in most
-% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
-% \tenbf}, for example. By redefining \tenbf, we obviate the need to
-% redefine \bf itself.
-\def\textfonts{%
- \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
- \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
- \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
- \resetmathfonts \setleading{\textleading}}
-\def\titlefonts{%
- \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
- \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
- \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
- \let\tenttsl=\titlettsl
- \resetmathfonts \setleading{25pt}}
-\def\titlefont#1{{\titlefonts\rm #1}}
-\def\chapfonts{%
- \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
- \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
- \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
- \resetmathfonts \setleading{19pt}}
-\def\secfonts{%
- \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
- \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
- \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
- \resetmathfonts \setleading{16pt}}
-\def\subsecfonts{%
- \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
- \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
- \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
- \resetmathfonts \setleading{15pt}}
-\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
-\def\smallfonts{%
- \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
- \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
- \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
- \let\tenttsl=\smallttsl
- \resetmathfonts \setleading{10.5pt}}
-\def\smallerfonts{%
- \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
- \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
- \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
- \let\tenttsl=\smallerttsl
- \resetmathfonts \setleading{9.5pt}}
-
-% Set the fonts to use with the @small... environments.
-\let\smallexamplefonts = \smallfonts
-
-% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
-% can fit this many characters:
-% 8.5x11=86 smallbook=72 a4=90 a5=69
-% If we use \smallerfonts (8pt), then we can fit this many characters:
-% 8.5x11=90+ smallbook=80 a4=90+ a5=77
-% For me, subjectively, the few extra characters that fit aren't worth
-% the additional smallness of 8pt. So I'm making the default 9pt.
-%
-% By the way, for comparison, here's what fits with @example (10pt):
-% 8.5x11=71 smallbook=60 a4=75 a5=58
-%
-% I wish we used A4 paper on this side of the Atlantic.
-%
-% --karl, 24jan03.
-
-
-% Set up the default fonts, so we can use them for creating boxes.
-%
-\textfonts
-
-% Define these so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
-
-% Count depth in font-changes, for error checks
-\newcount\fontdepth \fontdepth=0
-
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12
-\setfont\shortcontsl\slshape{12}{1000}
-\setfont\shortconttt\ttshape{12}{1000}
-
-%% Add scribe-like font environments, plus @l for inline lisp (usually sans
-%% serif) and @ii for TeX italic
-
-% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
-% unless the following character is such as not to need one.
-\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
- \ptexslash\fi\fi\fi}
-\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
-\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
-
-\let\i=\smartitalic
-\let\var=\smartslanted
-\let\dfn=\smartslanted
-\let\emph=\smartitalic
-\let\cite=\smartslanted
-
-\def\b#1{{\bf #1}}
-\let\strong=\b
-
-% We can't just use \exhyphenpenalty, because that only has effect at
-% the end of a paragraph. Restore normal hyphenation at the end of the
-% group within which \nohyphenation is presumably called.
-%
-\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
-\def\restorehyphenation{\hyphenchar\font = `- }
-
-% Set sfcode to normal for the chars that usually have another value.
-% Can't use plain's \frenchspacing because it uses the `\x notation, and
-% sometimes \x has an active definition that messes things up.
-%
-\catcode`@=11
- \def\frenchspacing{%
- \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
- \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
- }
-\catcode`@=\other
-
-\def\t#1{%
- {\tt \rawbackslash \frenchspacing #1}%
- \null
-}
-\let\ttfont=\t
-\def\samp#1{`\tclose{#1}'\null}
-\setfont\keyrm\rmshape{8}{1000}
-\font\keysy=cmsy9
-\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
- \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
- \vbox{\hrule\kern-0.4pt
- \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
- \kern-0.4pt\hrule}%
- \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-% The old definition, with no lozenge:
-%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
-% @file, @option are the same as @samp.
-\let\file=\samp
-\let\option=\samp
-
-% @code is a modification of @t,
-% which makes spaces the same size as normal in the surrounding text.
-\def\tclose#1{%
- {%
- % Change normal interword space to be same as for the current font.
- \spaceskip = \fontdimen2\font
- %
- % Switch to typewriter.
- \tt
- %
- % But `\ ' produces the large typewriter interword space.
- \def\ {{\spaceskip = 0pt{} }}%
- %
- % Turn off hyphenation.
- \nohyphenation
- %
- \rawbackslash
- \frenchspacing
- #1%
- }%
- \null
-}
-
-% We *must* turn on hyphenation at `-' and `_' in \code.
-% Otherwise, it is too hard to avoid overfull hboxes
-% in the Emacs manual, the Library manual, etc.
-
-% Unfortunately, TeX uses one parameter (\hyphenchar) to control
-% both hyphenation at - and hyphenation within words.
-% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash.
-% -- rms.
-{
- \catcode`\-=\active
- \catcode`\_=\active
- %
- \global\def\code{\begingroup
- \catcode`\-=\active \let-\codedash
- \catcode`\_=\active \let_\codeunder
- \codex
- }
- %
- % If we end up with any active - characters when handling the index,
- % just treat them as a normal -.
- \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
-}
-
-\def\realdash{-}
-\def\codedash{-\discretionary{}{}{}}
-\def\codeunder{%
- % this is all so @math{@code{var_name}+1} can work. In math mode, _
- % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
- % will therefore expand the active definition of _, which is us
- % (inside @code that is), therefore an endless loop.
- \ifusingtt{\ifmmode
- \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
- \else\normalunderscore \fi
- \discretionary{}{}{}}%
- {\_}%
-}
-\def\codex #1{\tclose{#1}\endgroup}
-
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-% `example' (@kbd uses ttsl only inside of @example and friends),
-% or `code' (@kbd uses normal tty font always).
-\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
-\def\kbdinputstylexxx#1{%
- \def\arg{#1}%
- \ifx\arg\worddistinct
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
- \else\ifx\arg\wordexample
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
- \else\ifx\arg\wordcode
- \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @kbdinputstyle option `\arg'}%
- \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is `distinct.'
-\kbdinputstyle distinct
-
-\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
-
-% For @url, @env, @command quotes seem unnecessary, so use \code.
-\let\url=\code
-\let\env=\code
-\let\command=\code
-
-% @uref (abbreviation for `urlref') takes an optional (comma-separated)
-% second argument specifying the text to display and an optional third
-% arg as text to display instead of (rather than in addition to) the url
-% itself. First (mandatory) arg is the url. Perhaps eventually put in
-% a hypertex \special here.
-%
-\def\uref#1{\douref #1,,,\finish}
-\def\douref#1,#2,#3,#4\finish{\begingroup
- \unsepspaces
- \pdfurl{#1}%
- \setbox0 = \hbox{\ignorespaces #3}%
- \ifdim\wd0 > 0pt
- \unhbox0 % third arg given, show only that
- \else
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
- \else
- \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
- \fi
- \else
- \code{#1}% only url given, so show it
- \fi
- \fi
- \endlink
-\endgroup}
-
-% rms does not like angle brackets --karl, 17may97.
-% So now @email is just like @uref, unless we are pdf.
-%
-%\def\email#1{\angleleft{\tt #1}\angleright}
-\ifpdf
- \def\email#1{\doemail#1,,\finish}
- \def\doemail#1,#2,#3\finish{\begingroup
- \unsepspaces
- \pdfurl{mailto:#1}%
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
- \endlink
- \endgroup}
-\else
- \let\email=\uref
-\fi
-
-% Check if we are currently using a typewriter font. Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-
-% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
-%
-\def\dmn#1{\thinspace #1}
-
-\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-
-% @l was never documented to mean ``switch to the Lisp font'',
-% and it is not used as such in any manual I can find. We need it for
-% Polish suppressed-l. --karl, 22sep96.
-%\def\l#1{{\li #1}\null}
-
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}} % roman font
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
-
-% @acronym downcases the argument and prints in smallcaps.
-\def\acronym#1{{\smallcaps \lowercase{#1}}}
-
-% @pounds{} is a sterling sign.
-\def\pounds{{\it\$}}
-
-% @registeredsymbol - R in a circle. For now, only works in text size;
-% we'd have to redo the font mechanism to change the \scriptstyle and
-% \scriptscriptstyle font sizes to make it look right in headings.
-% Adapted from the plain.tex definition of \copyright.
-%
-\def\registeredsymbol{%
- $^{{\ooalign{\hfil\raise.07ex\hbox{$\scriptstyle\rm R$}\hfil\crcr\Orb}}%
- }$%
-}
-
-
-\message{page headings,}
-
-\newskip\titlepagetopglue \titlepagetopglue = 1.5in
-\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
-
-% First the title page. Must do @settitle before @titlepage.
-\newif\ifseenauthor
-\newif\iffinishedtitlepage
-
-% Do an implicit @contents or @shortcontents after @end titlepage if the
-% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
-%
-\newif\ifsetcontentsaftertitlepage
- \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
-\newif\ifsetshortcontentsaftertitlepage
- \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
-
-\def\shorttitlepage{\parsearg\shorttitlepagezzz}
-\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
- \endgroup\page\hbox{}\page}
-
-\def\titlepage{\begingroup \parindent=0pt \textfonts
- \let\subtitlerm=\tenrm
- \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
- %
- \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
- \let\tt=\authortt}%
- %
- % Leave some space at the very top of the page.
- \vglue\titlepagetopglue
- %
- % Now you can print the title using @title.
- \def\title{\parsearg\titlezzz}%
- \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
- % No rule at page bottom unless we print one at the top with @title.
- \finishedtitlepagetrue
- %
- % Now you can put text using @subtitle.
- \def\subtitle{\parsearg\subtitlezzz}%
- \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
- %
- % @author should come last, but may come many times.
- \def\author{\parsearg\authorzzz}%
- \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
- {\authorfont \leftline{##1}}}%
- %
- % Most title ``pages'' are actually two pages long, with space
- % at the top of the second. We don't want the ragged left on the second.
- \let\oldpage = \page
- \def\page{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- \oldpage
- \let\page = \oldpage
- \hbox{}}%
-% \def\page{\oldpage \hbox{}}
-}
-
-\def\Etitlepage{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- % It is important to do the page break before ending the group,
- % because the headline and footline are only empty inside the group.
- % If we use the new definition of \page, we always get a blank page
- % after the title page, which we certainly don't want.
- \oldpage
- \endgroup
- %
- % Need this before the \...aftertitlepage checks so that if they are
- % in effect the toc pages will come out with page numbers.
- \HEADINGSon
- %
- % If they want short, they certainly want long too.
- \ifsetshortcontentsaftertitlepage
- \shortcontents
- \contents
- \global\let\shortcontents = \relax
- \global\let\contents = \relax
- \fi
- %
- \ifsetcontentsaftertitlepage
- \contents
- \global\let\contents = \relax
- \global\let\shortcontents = \relax
- \fi
-}
-
-\def\finishtitlepage{%
- \vskip4pt \hrule height 2pt width \hsize
- \vskip\titlepagebottomglue
- \finishedtitlepagetrue
-}
-
-%%% Set up page headings and footings.
-
-\let\thispage=\folio
-
-\newtoks\evenheadline % headline on even pages
-\newtoks\oddheadline % headline on odd pages
-\newtoks\evenfootline % footline on even pages
-\newtoks\oddfootline % footline on odd pages
-
-% Now make Tex use those variables
-\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
- \else \the\evenheadline \fi}}
-\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
- \else \the\evenfootline \fi}\HEADINGShook}
-\let\HEADINGShook=\relax
-
-% Commands to set those variables.
-% For example, this is what @headings on does
-% @evenheading @thistitle|@thispage|@thischapter
-% @oddheading @thischapter|@thispage|@thistitle
-% @evenfooting @thisfile||
-% @oddfooting ||@thisfile
-
-\def\evenheading{\parsearg\evenheadingxxx}
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\everyheading{\parsearg\everyheadingxxx}
-
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\everyfooting{\parsearg\everyfootingxxx}
-
-{\catcode`\@=0 %
-
-\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
-\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
-\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
-
-\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
-\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
-\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
- \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
- %
- % Leave some space for the footline. Hopefully ok to assume
- % @evenfooting will not be used by itself.
- \global\advance\pageheight by -\baselineskip
- \global\advance\vsize by -\baselineskip
-}
-
-\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-%
-}% unbind the catcode of @.
-
-% @headings double turns headings on for double-sided printing.
-% @headings single turns headings on for single-sided printing.
-% @headings off turns them off.
-% @headings on same as @headings double, retained for compatibility.
-% @headings after turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
-% @headings singleafter turns on single-sided headings after this page.
-% By default, they are off at the start of a document,
-% and turned `on' after @end titlepage.
-
-\def\headings #1 {\csname HEADINGS#1\endcsname}
-
-\def\HEADINGSoff{
-\global\evenheadline={\hfil} \global\evenfootline={\hfil}
-\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
-\HEADINGSoff
-% When we turn headings on, set the page number to 1.
-% For double-sided printing, put current file name in lower left corner,
-% chapter name on inside top of right hand pages, document
-% title on inside top of left hand pages, and page numbers on outside top
-% edge of all pages.
-\def\HEADINGSdouble{
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-\let\contentsalignmacro = \chappager
-
-% For single-sided printing, chapter title goes across top left of page,
-% page number on top right.
-\def\HEADINGSsingle{
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-\def\HEADINGSon{\HEADINGSdouble}
-
-\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
-\let\HEADINGSdoubleafter=\HEADINGSafter
-\def\HEADINGSdoublex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-
-\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
-\def\HEADINGSsinglex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-
-% Subroutines used in generating headings
-% This produces Day Month Year style of output.
-% Only define if not already defined, in case a txi-??.tex file has set
-% up a different format (e.g., txi-cs.tex does this).
-\ifx\today\undefined
-\def\today{%
- \number\day\space
- \ifcase\month
- \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
- \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
- \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
- \fi
- \space\number\year}
-\fi
-
-% @settitle line... specifies the title of the document, for headings.
-% It generates no output of its own.
-\def\thistitle{\putwordNoTitle}
-\def\settitle{\parsearg\settitlezzz}
-\def\settitlezzz #1{\gdef\thistitle{#1}}
-
-
-\message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
-
-% default indentation of table text
-\newdimen\tableindent \tableindent=.8in
-% default indentation of @itemize and @enumerate text
-\newdimen\itemindent \itemindent=.3in
-% margin between end of table item and start of table text.
-\newdimen\itemmargin \itemmargin=.1in
-
-% used internally for \itemindent minus \itemmargin
-\newdimen\itemmax
-
-% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
-% these defs.
-% They also define \itemindex
-% to index the item name in whatever manner is desired (perhaps none).
-
-\newif\ifitemxneedsnegativevskip
-
-\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
-
-\def\internalBitem{\smallbreak \parsearg\itemzzz}
-\def\internalBitemx{\itemxpar \parsearg\itemzzz}
-
-\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
-\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
-
-\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
-\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
-
-\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
- \itemzzz {#1}}
-
-\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
- \itemzzz {#1}}
-
-\def\itemzzz #1{\begingroup %
- \advance\hsize by -\rightskip
- \advance\hsize by -\tableindent
- \setbox0=\hbox{\itemfont{#1}}%
- \itemindex{#1}%
- \nobreak % This prevents a break before @itemx.
- %
- % If the item text does not fit in the space we have, put it on a line
- % by itself, and do not allow a page break either before or after that
- % line. We do not start a paragraph here because then if the next
- % command is, e.g., @kindex, the whatsit would get put into the
- % horizontal list on a line by itself, resulting in extra blank space.
- \ifdim \wd0>\itemmax
- %
- % Make this a paragraph so we get the \parskip glue and wrapping,
- % but leave it ragged-right.
- \begingroup
- \advance\leftskip by-\tableindent
- \advance\hsize by\tableindent
- \advance\rightskip by0pt plus1fil
- \leavevmode\unhbox0\par
- \endgroup
- %
- % We're going to be starting a paragraph, but we don't want the
- % \parskip glue -- logically it's part of the @item we just started.
- \nobreak \vskip-\parskip
- %
- % Stop a page break at the \parskip glue coming up. (Unfortunately
- % we can't prevent a possible page break at the following
- % \baselineskip glue.) However, if what follows is an environment
- % such as @example, there will be no \parskip glue; then
- % the negative vskip we just would cause the example and the item to
- % crash together. So we use this bizarre value of 10001 as a signal
- % to \aboveenvbreak to insert \parskip glue after all.
- % (Possibly there are other commands that could be followed by
- % @example which need the same treatment, but not section titles; or
- % maybe section titles are the only special case and they should be
- % penalty 10001...)
- \penalty 10001
- \endgroup
- \itemxneedsnegativevskipfalse
- \else
- % The item text fits into the space. Start a paragraph, so that the
- % following text (if any) will end up on the same line.
- \noindent
- % Do this with kerns and \unhbox so that if there is a footnote in
- % the item text, it can migrate to the main vertical list and
- % eventually be printed.
- \nobreak\kern-\tableindent
- \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
- \unhbox0
- \nobreak\kern\dimen0
- \endgroup
- \itemxneedsnegativevskiptrue
- \fi
-}
-
-\def\item{\errmessage{@item while not in a table}}
-\def\itemx{\errmessage{@itemx while not in a table}}
-\def\kitem{\errmessage{@kitem while not in a table}}
-\def\kitemx{\errmessage{@kitemx while not in a table}}
-\def\xitem{\errmessage{@xitem while not in a table}}
-\def\xitemx{\errmessage{@xitemx while not in a table}}
-
-% Contains a kludge to get @end[description] to work.
-\def\description{\tablez{\dontindex}{1}{}{}{}{}}
-
-% @table, @ftable, @vtable.
-\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
-{\obeylines\obeyspaces%
-\gdef\tablex #1^^M{%
-\tabley\dontindex#1 \endtabley}}
-
-\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
-{\obeylines\obeyspaces%
-\gdef\ftablex #1^^M{%
-\tabley\fnitemindex#1 \endtabley
-\def\Eftable{\endgraf\afterenvbreak\endgroup}%
-\let\Etable=\relax}}
-
-\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
-{\obeylines\obeyspaces%
-\gdef\vtablex #1^^M{%
-\tabley\vritemindex#1 \endtabley
-\def\Evtable{\endgraf\afterenvbreak\endgroup}%
-\let\Etable=\relax}}
-
-\def\dontindex #1{}
-\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
-\def\vritemindex #1{\doind {vr}{\code{#1}}}%
-
-{\obeyspaces %
-\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
-\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
-
-\def\tablez #1#2#3#4#5#6{%
-\aboveenvbreak %
-\begingroup %
-\def\Edescription{\Etable}% Necessary kludge.
-\let\itemindex=#1%
-\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
-\ifnum 0#4>0 \tableindent=#4\mil \fi %
-\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
-\def\itemfont{#2}%
-\itemmax=\tableindent %
-\advance \itemmax by -\itemmargin %
-\advance \leftskip by \tableindent %
-\exdentamount=\tableindent
-\parindent = 0pt
-\parskip = \smallskipamount
-\ifdim \parskip=0pt \parskip=2pt \fi%
-\def\Etable{\endgraf\afterenvbreak\endgroup}%
-\let\item = \internalBitem %
-\let\itemx = \internalBitemx %
-\let\kitem = \internalBkitem %
-\let\kitemx = \internalBkitemx %
-\let\xitem = \internalBxitem %
-\let\xitemx = \internalBxitemx %
-}
-
-% This is the counter used by @enumerate, which is really @itemize
-
-\newcount \itemno
-
-\def\itemize{\parsearg\itemizezzz}
-
-\def\itemizezzz #1{%
- \begingroup % ended by the @end itemize
- \itemizey {#1}{\Eitemize}
-}
-
-\def\itemizey#1#2{%
- \aboveenvbreak
- \itemmax=\itemindent
- \advance\itemmax by -\itemmargin
- \advance\leftskip by \itemindent
- \exdentamount=\itemindent
- \parindent=0pt
- \parskip=\smallskipamount
- \ifdim\parskip=0pt \parskip=2pt \fi
- \def#2{\endgraf\afterenvbreak\endgroup}%
- \def\itemcontents{#1}%
- % @itemize with no arg is equivalent to @itemize @bullet.
- \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
- \let\item=\itemizeitem
-}
-
-% \splitoff TOKENS\endmark defines \first to be the first token in
-% TOKENS, and \rest to be the remainder.
-%
-\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
-
-% Allow an optional argument of an uppercase letter, lowercase letter,
-% or number, to specify the first label in the enumerated list. No
-% argument is the same as `1'.
-%
-\def\enumerate{\parsearg\enumeratezzz}
-\def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
-\def\enumeratey #1 #2\endenumeratey{%
- \begingroup % ended by the @end enumerate
- %
- % If we were given no argument, pretend we were given `1'.
- \def\thearg{#1}%
- \ifx\thearg\empty \def\thearg{1}\fi
- %
- % Detect if the argument is a single token. If so, it might be a
- % letter. Otherwise, the only valid thing it can be is a number.
- % (We will always have one token, because of the test we just made.
- % This is a good thing, since \splitoff doesn't work given nothing at
- % all -- the first parameter is undelimited.)
- \expandafter\splitoff\thearg\endmark
- \ifx\rest\empty
- % Only one token in the argument. It could still be anything.
- % A ``lowercase letter'' is one whose \lccode is nonzero.
- % An ``uppercase letter'' is one whose \lccode is both nonzero, and
- % not equal to itself.
- % Otherwise, we assume it's a number.
- %
- % We need the \relax at the end of the \ifnum lines to stop TeX from
- % continuing to look for a <number>.
- %
- \ifnum\lccode\expandafter`\thearg=0\relax
- \numericenumerate % a number (we hope)
- \else
- % It's a letter.
- \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
- \lowercaseenumerate % lowercase letter
- \else
- \uppercaseenumerate % uppercase letter
- \fi
- \fi
- \else
- % Multiple tokens in the argument. We hope it's a number.
- \numericenumerate
- \fi
-}
-
-% An @enumerate whose labels are integers. The starting integer is
-% given in \thearg.
-%
-\def\numericenumerate{%
- \itemno = \thearg
- \startenumeration{\the\itemno}%
-}
-
-% The starting (lowercase) letter is in \thearg.
-\def\lowercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more lowercase letters in @enumerate; get a bigger
- alphabet}%
- \fi
- \char\lccode\itemno
- }%
-}
-
-% The starting (uppercase) letter is in \thearg.
-\def\uppercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more uppercase letters in @enumerate; get a bigger
- alphabet}
- \fi
- \char\uccode\itemno
- }%
-}
-
-% Call itemizey, adding a period to the first argument and supplying the
-% common last two arguments. Also subtract one from the initial value in
-% \itemno, since @item increments \itemno.
-%
-\def\startenumeration#1{%
- \advance\itemno by -1
- \itemizey{#1.}\Eenumerate\flushcr
-}
-
-% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
-% to @enumerate.
-%
-\def\alphaenumerate{\enumerate{a}}
-\def\capsenumerate{\enumerate{A}}
-\def\Ealphaenumerate{\Eenumerate}
-\def\Ecapsenumerate{\Eenumerate}
-
-% Definition of @item while inside @itemize.
-
-\def\itemizeitem{%
-\advance\itemno by 1
-{\let\par=\endgraf \smallbreak}%
-\ifhmode \errmessage{In hmode at itemizeitem}\fi
-{\parskip=0in \hskip 0pt
-\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
-\vadjust{\penalty 1200}}%
-\flushcr}
-
-% @multitable macros
-% Amy Hendrickson, 8/18/94, 3/6/96
-%
-% @multitable ... @end multitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble. Width
-% can be specified either with sample text given in a template line,
-% or in percent of \hsize, the current width of text on page.
-
-% Table can continue over pages but will only break between lines.
-
-% To make preamble:
-%
-% Either define widths of columns in terms of percent of \hsize:
-% @multitable @columnfractions .25 .3 .45
-% @item ...
-%
-% Numbers following @columnfractions are the percent of the total
-% current hsize to be used for each column. You may use as many
-% columns as desired.
-
-
-% Or use a template:
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item ...
-% using the widest term desired in each column.
-%
-% For those who want to use more than one line's worth of words in
-% the preamble, break the line within one argument and it
-% will parse correctly, i.e.,
-%
-% @multitable {Column 1 template} {Column 2 template} {Column 3
-% template}
-% Not:
-% @multitable {Column 1 template} {Column 2 template}
-% {Column 3 template}
-
-% Each new table line starts with @item, each subsequent new column
-% starts with @tab. Empty columns may be produced by supplying @tab's
-% with nothing between them for as many times as empty columns are needed,
-% ie, @tab@tab@tab will produce two empty columns.
-
-% @item, @tab, @multitable or @end multitable do not need to be on their
-% own lines, but it will not hurt if they are.
-
-% Sample multitable:
-
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
-% @tab Many paragraphs of text may be used in any column.
-%
-% They will wrap at the width determined by the template.
-% @item@tab@tab This will be in third column.
-% @end multitable
-
-% Default dimensions may be reset by user.
-% @multitableparskip is vertical space between paragraphs in table.
-% @multitableparindent is paragraph indent in table.
-% @multitablecolmargin is horizontal space to be left between columns.
-% @multitablelinespace is space to leave between table items, baseline
-% to baseline.
-% 0pt means it depends on current normal line spacing.
-%
-\newskip\multitableparskip
-\newskip\multitableparindent
-\newdimen\multitablecolspace
-\newskip\multitablelinespace
-\multitableparskip=0pt
-\multitableparindent=6pt
-\multitablecolspace=12pt
-\multitablelinespace=0pt
-
-% Macros used to set up halign preamble:
-%
-\let\endsetuptable\relax
-\def\xendsetuptable{\endsetuptable}
-\let\columnfractions\relax
-\def\xcolumnfractions{\columnfractions}
-\newif\ifsetpercent
-
-% #1 is the part of the @columnfraction before the decimal point, which
-% is presumably either 0 or the empty string (but we don't check, we
-% just throw it away). #2 is the decimal part, which we use as the
-% percent of \hsize for this column.
-\def\pickupwholefraction#1.#2 {%
- \global\advance\colcount by 1
- \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
- \setuptable
-}
-
-\newcount\colcount
-\def\setuptable#1{%
- \def\firstarg{#1}%
- \ifx\firstarg\xendsetuptable
- \let\go = \relax
- \else
- \ifx\firstarg\xcolumnfractions
- \global\setpercenttrue
- \else
- \ifsetpercent
- \let\go\pickupwholefraction
- \else
- \global\advance\colcount by 1
- \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
- % separator; typically that is always in the input, anyway.
- \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
- \fi
- \fi
- \ifx\go\pickupwholefraction
- % Put the argument back for the \pickupwholefraction call, so
- % we'll always have a period there to be parsed.
- \def\go{\pickupwholefraction#1}%
- \else
- \let\go = \setuptable
- \fi%
- \fi
- \go
-}
-
-% @multitable ... @end multitable definitions:
-%
-\def\multitable{\parsearg\dotable}
-\def\dotable#1{\bgroup
- \vskip\parskip
- \let\item=\crcrwithfootnotes
- % A \tab used to include \hskip1sp. But then the space in a template
- % line is not enough. That is bad. So let's go back to just & until
- % we encounter the problem it was intended to solve again. --karl,
- % nathan@acm.org, 20apr99.
- \let\tab=&%
- \let\startfootins=\startsavedfootnote
- \tolerance=9500
- \hbadness=9500
- \setmultitablespacing
- \parskip=\multitableparskip
- \parindent=\multitableparindent
- \overfullrule=0pt
- \global\colcount=0
- \def\Emultitable{%
- \global\setpercentfalse
- \crcrwithfootnotes\crcr
- \egroup\egroup
- }%
- %
- % To parse everything between @multitable and @item:
- \setuptable#1 \endsetuptable
- %
- % \everycr will reset column counter, \colcount, at the end of
- % each line. Every column entry will cause \colcount to advance by one.
- % The table preamble
- % looks at the current \colcount to find the correct column width.
- \everycr{\noalign{%
- %
- % \filbreak%% keeps underfull box messages off when table breaks over pages.
- % Maybe so, but it also creates really weird page breaks when the table
- % breaks over pages. Wouldn't \vfil be better? Wait until the problem
- % manifests itself, so it can be fixed for real --karl.
- \global\colcount=0\relax}}%
- %
- % This preamble sets up a generic column definition, which will
- % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
- % continue for many paragraphs if desired.
- \halign\bgroup&\global\advance\colcount by 1\relax
- \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
- %
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- %
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- %
- % If the user has set preamble in terms of percent of \hsize we will
- % use that dimension as the width of the column, and the \leftskip
- % will keep entries from bumping into each other. Table will start at
- % left margin and final column will justify at right margin.
- %
- % Make sure we don't inherit \rightskip from the outer environment.
- \rightskip=0pt
- \ifnum\colcount=1
- % The first column will be indented with the surrounding text.
- \advance\hsize by\leftskip
- \else
- \ifsetpercent \else
- % If user has not set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace.
- \advance\hsize by \multitablecolspace
- \fi
- % In either case we will make \leftskip=\multitablecolspace:
- \leftskip=\multitablecolspace
- \fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively marking
- % characters.
- \noindent\ignorespaces##\unskip\multistrut}\cr
-}
-
-\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
-% If so, do nothing. If not, give it an appropriate dimension based on
-% current baselineskip.
-\ifdim\multitablelinespace=0pt
-\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
-\global\advance\multitablelinespace by-\ht0
-%% strut to put in table in case some entry doesn't have descenders,
-%% to keep lines equally spaced
-\let\multistrut = \strut
-\else
-%% FIXME: what is \box0 supposed to be?
-\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
-width0pt\relax} \fi
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%% If so, set to same dimension as multitablelinespace.
-\ifdim\multitableparskip>\multitablelinespace
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi%
-\ifdim\multitableparskip=0pt
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi}
-
-% In case a @footnote appears inside an alignment, save the footnote
-% text to a box and make the \insert when a row of the table is
-% finished. Otherwise, the insertion is lost, it never migrates to the
-% main vertical list. --kasal, 22jan03.
-%
-\newbox\savedfootnotes
-%
-% \dotable \let's \startfootins to this, so that \dofootnote will call
-% it instead of starting the insertion right away.
-\def\startsavedfootnote{%
- \global\setbox\savedfootnotes = \vbox\bgroup
- \unvbox\savedfootnotes
-}
-\def\crcrwithfootnotes{%
- \crcr
- \ifvoid\savedfootnotes \else
- \noalign{\insert\footins{\box\savedfootnotes}}%
- \fi
-}
-
-\message{conditionals,}
-% Prevent errors for section commands.
-% Used in @ignore and in failing conditionals.
-\def\ignoresections{%
- \let\appendix=\relax
- \let\appendixsec=\relax
- \let\appendixsection=\relax
- \let\appendixsubsec=\relax
- \let\appendixsubsection=\relax
- \let\appendixsubsubsec=\relax
- \let\appendixsubsubsection=\relax
- %\let\begin=\relax
- %\let\bye=\relax
- \let\centerchap=\relax
- \let\chapter=\relax
- \let\contents=\relax
- \let\section=\relax
- \let\smallbook=\relax
- \let\subsec=\relax
- \let\subsection=\relax
- \let\subsubsec=\relax
- \let\subsubsection=\relax
- \let\titlepage=\relax
- \let\top=\relax
- \let\unnumbered=\relax
- \let\unnumberedsec=\relax
- \let\unnumberedsection=\relax
- \let\unnumberedsubsec=\relax
- \let\unnumberedsubsection=\relax
- \let\unnumberedsubsubsec=\relax
- \let\unnumberedsubsubsection=\relax
-}
-
-% Ignore @ignore, @ifhtml, @ifinfo, and the like.
-%
-\def\direntry{\doignore{direntry}}
-\def\documentdescriptionword{documentdescription}
-\def\documentdescription{\doignore{documentdescription}}
-\def\html{\doignore{html}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\ifplaintext{\doignore{ifplaintext}}
-\def\ifxml{\doignore{ifxml}}
-\def\ignore{\doignore{ignore}}
-\def\menu{\doignore{menu}}
-\def\xml{\doignore{xml}}
-
-% @dircategory CATEGORY -- specify a category of the dir file
-% which this file should belong to. Ignore this in TeX.
-\let\dircategory = \comment
-
-% Ignore text until a line `@end #1', keeping track of nested conditionals.
-%
-% A count to remember the depth of nesting.
-\newcount\doignorecount
-
-\def\doignore#1{\begingroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Make sure that spaces turn into tokens that match what \doignoretext wants.
- \catcode\spaceChar = 10
- %
- % Ignore braces, so mismatched braces don't cause trouble.
- \catcode`\{ = 9
- \catcode`\} = 9
- %
- % Count number of #1's that we've seen.
- \doignorecount = 0
- %
- % Swallow text until we reach the matching `@end #1'.
- \expandafter \dodoignore \csname#1\endcsname {#1}%
-}
-
-{ \catcode`@=11 % We want to use \ST@P which cannot appear in texinfo source.
- \obeylines %
- %
- \gdef\dodoignore#1#2{%
- % #1 contains, e.g., \ifinfo, a.k.a. @ifinfo.
- % #2 contains the string `ifinfo'.
- %
- % Define a command to find the next `@end #2', which must be on a line
- % by itself.
- \long\def\doignoretext##1^^M\end #2{\doignoretextyyy##1^^M#1\ST@P}%
- % And this command to find another #1 command, at the beginning of a
- % line. (Otherwise, we would consider a line `@c @ifset', for
- % example, to count as an @ifset for nesting.)
- \long\def\doignoretextyyy##1^^M#1##2\ST@P{\doignoreyyy{##2}\ST@P}%
- %
- % And now expand that command.
- \obeylines %
- \doignoretext ^^M%
- }%
-}
-
-\def\doignoreyyy#1{%
- \def\temp{#1}%
- \ifx\temp\empty % Nothing found.
- \let\next\doignoretextzzz
- \else % Found a nested condition, ...
- \advance\doignorecount by 1
- \let\next\doignoretextyyy % ..., look for another.
- % If we're here, #1 ends with ^^M\ifinfo (for example).
- \fi
- \next #1% the token \ST@P is present just after this macro.
-}
-
-% We have to swallow the remaining "\ST@P".
-%
-\def\doignoretextzzz#1{%
- \ifnum\doignorecount = 0 % We have just found the outermost @end.
- \let\next\enddoignore
- \else % Still inside a nested condition.
- \advance\doignorecount by -1
- \let\next\doignoretext % Look for the next @end.
- \fi
- \next
-}
-
-% Finish off ignored text.
-\def\enddoignore{\endgroup\ignorespaces}
-
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it. Make sure the catcode of space is correct to avoid
-% losing inside @example, for instance.
-%
-\def\set{\begingroup\catcode` =10
- \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
- \parsearg\setxxx}
-\def\setxxx#1{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
- \def\temp{#2}%
- \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
- \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
- \fi
- \endgroup
-}
-% Can't use \xdef to pre-expand #2 and save some time, since \temp or
-% \next or other control sequences that we've defined might get us into
-% an infinite loop. Consider `@set foo @cite{bar}'.
-\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\def\clear{\parsearg\clearxxx}
-\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
-
-% @value{foo} gets the text saved in variable foo.
-{
- \catcode`\_ = \active
- %
- % We might end up with active _ or - characters in the argument if
- % we're called from @code, as @code{@value{foo-bar_}}. So \let any
- % such active characters to their normal equivalents.
- \gdef\value{\begingroup
- \catcode`\-=\other \catcode`\_=\other
- \indexbreaks \let_\normalunderscore
- \valuexxx}
-}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-
-% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we \let\value to this in \indexdummies). Ones
-% whose names contain - or _ still won't work, but we can't do anything
-% about that. The command has to be fully expandable (if the variable
-% is set), since the result winds up in the index file. This means that
-% if the variable's value contains other Texinfo commands, it's almost
-% certain it will fail (although perhaps we could fix that with
-% sufficient work to do a one-level expansion on the result, instead of
-% complete).
-%
-\def\expandablevalue#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- {[No value for ``#1'']}%
- \message{Variable `#1', used in @value, is not set.}%
- \else
- \csname SET#1\endcsname
- \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-%
-\def\ifset{\parsearg\doifset}
-\def\doifset#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \let\next=\ifsetfail
- \else
- \let\next=\ifsetsucceed
- \fi
- \next
-}
-\def\ifsetsucceed{\conditionalsucceed{ifset}}
-\def\ifsetfail{\doignore{ifset}}
-\defineunmatchedend{ifset}
-
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-\def\ifclear{\parsearg\doifclear}
-\def\doifclear#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \let\next=\ifclearsucceed
- \else
- \let\next=\ifclearfail
- \fi
- \next
-}
-\def\ifclearsucceed{\conditionalsucceed{ifclear}}
-\def\ifclearfail{\doignore{ifclear}}
-\defineunmatchedend{ifclear}
-
-% @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we
-% read the text following, through the first @end iftex (etc.). Make
-% `@end iftex' (etc.) valid only after an @iftex.
-%
-\def\iftex{\conditionalsucceed{iftex}}
-\def\ifnothtml{\conditionalsucceed{ifnothtml}}
-\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
-\def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}}
-\defineunmatchedend{iftex}
-\defineunmatchedend{ifnothtml}
-\defineunmatchedend{ifnotinfo}
-\defineunmatchedend{ifnotplaintext}
-
-% True conditional. Since \set globally defines its variables, we can
-% just start and end a group (to keep the @end definition undefined at
-% the outer level).
-%
-\def\conditionalsucceed#1{\begingroup
- \expandafter\def\csname E#1\endcsname{\endgroup}%
-}
-
-% @defininfoenclose.
-\let\definfoenclose=\comment
-
-
-\message{indexing,}
-% Index generation facilities
-
-% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within \newindex.
-{\catcode`\@=11
-\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
-
-% \newindex {foo} defines an index named foo.
-% It automatically defines \fooindex such that
-% \fooindex ...rest of line... puts an entry in the index foo.
-% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
-% The name of an index should be no more than 2 characters long
-% for the sake of vms.
-%
-\def\newindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
- \fi
- \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
- \noexpand\doindex{#1}}
-}
-
-% @defindex foo == \newindex{foo}
-%
-\def\defindex{\parsearg\newindex}
-
-% Define @defcodeindex, like @defindex except put all entries in @code.
-%
-\def\defcodeindex{\parsearg\newcodeindex}
-%
-\def\newcodeindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1
- \fi
- \expandafter\xdef\csname#1index\endcsname{%
- \noexpand\docodeindex{#1}}%
-}
-
-
-% @synindex foo bar makes index foo feed into index bar.
-% Do this instead of @defindex foo if you don't want it as a separate index.
-%
-% @syncodeindex foo bar similar, but put all entries made for index foo
-% inside @code.
-%
-\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
-\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
-
-% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
-% #3 the target index (bar).
-\def\dosynindex#1#2#3{%
- % Only do \closeout if we haven't already done it, else we'll end up
- % closing the target index.
- \expandafter \ifx\csname donesynindex#2\endcsname \undefined
- % The \closeout helps reduce unnecessary open files; the limit on the
- % Acorn RISC OS is a mere 16 files.
- \expandafter\closeout\csname#2indfile\endcsname
- \expandafter\let\csname\donesynindex#2\endcsname = 1
- \fi
- % redefine \fooindfile:
- \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
- \expandafter\let\csname#2indfile\endcsname=\temp
- % redefine \fooindex:
- \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
-}
-
-% Define \doindex, the driver for all \fooindex macros.
-% Argument #1 is generated by the calling \fooindex macro,
-% and it is "foo", the name of the index.
-
-% \doindex just uses \parsearg; it calls \doind for the actual work.
-% This is because \doind is more useful to call from other macros.
-
-% There is also \dosubind {index}{topic}{subtopic}
-% which makes an entry in a two-level index such as the operation index.
-
-\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
-\def\singleindexer #1{\doind{\indexname}{#1}}
-
-% like the previous two, but they put @code around the argument.
-\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
-\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
-
-% Take care of Texinfo commands that can appear in an index entry.
-% Since there are some commands we want to expand, and others we don't,
-% we have to laboriously prevent expansion for those that we don't.
-%
-\def\indexdummies{%
- \def\@{@}% change to @@ when we switch to @ as escape char in index files.
- \def\ {\realbackslash\space }%
- % Need these in case \tex is in effect and \{ is a \delimiter again.
- % But can't use \lbracecmd and \rbracecmd because texindex assumes
- % braces and backslashes are used only as delimiters.
- \let\{ = \mylbrace
- \let\} = \myrbrace
- %
- % \definedummyword defines \#1 as \realbackslash #1\space, thus
- % effectively preventing its expansion. This is used only for control
- % words, not control letters, because the \space would be incorrect
- % for control characters, but is needed to separate the control word
- % from whatever follows.
- %
- % For control letters, we have \definedummyletter, which omits the
- % space.
- %
- % These can be used both for control words that take an argument and
- % those that do not. If it is followed by {arg} in the input, then
- % that will dutifully get written to the index (or wherever).
- %
- \def\definedummyword##1{%
- \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}%
- }%
- \def\definedummyletter##1{%
- \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
- }%
- %
- % Do the redefinitions.
- \commondummies
-}
-
-% For the aux file, @ is the escape character. So we want to redefine
-% everything using @ instead of \realbackslash. When everything uses
-% @, this will be simpler.
-%
-\def\atdummies{%
- \def\@{@@}%
- \def\ {@ }%
- \let\{ = \lbraceatcmd
- \let\} = \rbraceatcmd
- %
- % (See comments in \indexdummies.)
- \def\definedummyword##1{%
- \expandafter\def\csname ##1\endcsname{@##1\space}%
- }%
- \def\definedummyletter##1{%
- \expandafter\def\csname ##1\endcsname{@##1}%
- }%
- %
- % Do the redefinitions.
- \commondummies
-}
-
-% Called from \indexdummies and \atdummies. \definedummyword and
-% \definedummyletter must be defined first.
-%
-\def\commondummies{%
- %
- \normalturnoffactive
- %
- % Control letters and accents.
- \definedummyletter{_}%
- \definedummyletter{,}%
- \definedummyletter{"}%
- \definedummyletter{`}%
- \definedummyletter{'}%
- \definedummyletter{^}%
- \definedummyletter{~}%
- \definedummyletter{=}%
- \definedummyword{u}%
- \definedummyword{v}%
- \definedummyword{H}%
- \definedummyword{dotaccent}%
- \definedummyword{ringaccent}%
- \definedummyword{tieaccent}%
- \definedummyword{ubaraccent}%
- \definedummyword{udotaccent}%
- \definedummyword{dotless}%
- %
- % Other non-English letters.
- \definedummyword{AA}%
- \definedummyword{AE}%
- \definedummyword{L}%
- \definedummyword{OE}%
- \definedummyword{O}%
- \definedummyword{aa}%
- \definedummyword{ae}%
- \definedummyword{l}%
- \definedummyword{oe}%
- \definedummyword{o}%
- \definedummyword{ss}%
- %
- % Although these internal commands shouldn't show up, sometimes they do.
- \definedummyword{bf}%
- \definedummyword{gtr}%
- \definedummyword{hat}%
- \definedummyword{less}%
- \definedummyword{sf}%
- \definedummyword{sl}%
- \definedummyword{tclose}%
- \definedummyword{tt}%
- %
- % Texinfo font commands.
- \definedummyword{b}%
- \definedummyword{i}%
- \definedummyword{r}%
- \definedummyword{sc}%
- \definedummyword{t}%
- %
- \definedummyword{TeX}%
- \definedummyword{acronym}%
- \definedummyword{cite}%
- \definedummyword{code}%
- \definedummyword{command}%
- \definedummyword{dfn}%
- \definedummyword{dots}%
- \definedummyword{emph}%
- \definedummyword{env}%
- \definedummyword{file}%
- \definedummyword{kbd}%
- \definedummyword{key}%
- \definedummyword{math}%
- \definedummyword{option}%
- \definedummyword{samp}%
- \definedummyword{strong}%
- \definedummyword{uref}%
- \definedummyword{url}%
- \definedummyword{var}%
- \definedummyword{verb}%
- \definedummyword{w}%
- %
- % Assorted special characters.
- \definedummyword{bullet}%
- \definedummyword{copyright}%
- \definedummyword{dots}%
- \definedummyword{enddots}%
- \definedummyword{equiv}%
- \definedummyword{error}%
- \definedummyword{expansion}%
- \definedummyword{minus}%
- \definedummyword{pounds}%
- \definedummyword{point}%
- \definedummyword{print}%
- \definedummyword{result}%
- %
- % Handle some cases of @value -- where the variable name does not
- % contain - or _, and the value does not contain any
- % (non-fully-expandable) commands.
- \let\value = \expandablevalue
- %
- % Normal spaces, not active ones.
- \unsepspaces
- %
- % No macro expansion.
- \turnoffmacros
-}
-
-% If an index command is used in an @example environment, any spaces
-% therein should become regular spaces in the raw index file, not the
-% expansion of \tie (\leavevmode \penalty \@M \ ).
-{\obeyspaces
- \gdef\unsepspaces{\obeyspaces\let =\space}}
-
-
-% \indexnofonts is used when outputting the strings to sort the index
-% by, and when constructing control sequence names. It eliminates all
-% control sequences and just writes whatever the best ASCII sort string
-% would be for a given command (usually its argument).
-%
-\def\indexdummytex{TeX}
-\def\indexdummydots{...}
-%
-\def\indexnofonts{%
- \def\ { }%
- \def\@{@}%
- % how to handle braces?
- \def\_{\normalunderscore}%
- %
- \let\,=\asis
- \let\"=\asis
- \let\`=\asis
- \let\'=\asis
- \let\^=\asis
- \let\~=\asis
- \let\==\asis
- \let\u=\asis
- \let\v=\asis
- \let\H=\asis
- \let\dotaccent=\asis
- \let\ringaccent=\asis
- \let\tieaccent=\asis
- \let\ubaraccent=\asis
- \let\udotaccent=\asis
- \let\dotless=\asis
- %
- % Other non-English letters.
- \def\AA{AA}%
- \def\AE{AE}%
- \def\L{L}%
- \def\OE{OE}%
- \def\O{O}%
- \def\aa{aa}%
- \def\ae{ae}%
- \def\l{l}%
- \def\oe{oe}%
- \def\o{o}%
- \def\ss{ss}%
- \def\exclamdown{!}%
- \def\questiondown{?}%
- %
- % Don't no-op \tt, since it isn't a user-level command
- % and is used in the definitions of the active chars like <, >, |, etc.
- % Likewise with the other plain tex font commands.
- %\let\tt=\asis
- %
- % Texinfo font commands.
- \let\b=\asis
- \let\i=\asis
- \let\r=\asis
- \let\sc=\asis
- \let\t=\asis
- %
- \let\TeX=\indexdummytex
- \let\acronym=\asis
- \let\cite=\asis
- \let\code=\asis
- \let\command=\asis
- \let\dfn=\asis
- \let\dots=\indexdummydots
- \let\emph=\asis
- \let\env=\asis
- \let\file=\asis
- \let\kbd=\asis
- \let\key=\asis
- \let\math=\asis
- \let\option=\asis
- \let\samp=\asis
- \let\strong=\asis
- \let\uref=\asis
- \let\url=\asis
- \let\var=\asis
- \let\verb=\asis
- \let\w=\asis
-}
-
-\let\indexbackslash=0 %overridden during \printindex.
-\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
-
-% Most index entries go through here, but \dosubind is the general case.
-%
-\def\doind#1#2{\dosubind{#1}{#2}{}}
-
-% Workhorse for all \fooindexes.
-% #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% \empty if called from \doind, as we usually are. The main exception
-% is with defuns, which call us directly.
-%
-\def\dosubind#1#2#3{%
- \iflinks
- {%
- % Store the main index entry text (including the third arg).
- \toks0 = {#2}%
- % If third arg is present, precede it with space.
- \def\thirdarg{#3}%
- \ifx\thirdarg\empty \else
- \toks0 = \expandafter{\the\toks0 \space #3}%
- \fi
- %
- \edef\writeto{\csname#1indfile\endcsname}%
- %
- \ifvmode
- \dosubindsanitize
- \else
- \dosubindwrite
- \fi
- }%
- \fi
-}
-
-% Write the entry to the index file:
-%
-\def\dosubindwrite{%
- % Put the index entry in the margin if desired.
- \ifx\SETmarginindex\relax\else
- \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
- \fi
- %
- % Remember, we are within a group.
- \indexdummies % Must do this here, since \bf, etc expand at this stage
- \escapechar=`\\
- \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
- % so it will be output as is; and it will print as backslash.
- %
- % Process the index entry with all font commands turned off, to
- % get the string to sort by.
- {\indexnofonts
- \edef\temp{\the\toks0}% need full expansion
- \xdef\indexsorttmp{\temp}%
- }%
- %
- % Set up the complete index entry, with both the sort key and
- % the original text, including any font commands. We write
- % three arguments to \entry to the .?? file (four in the
- % subentry case), texindex reduces to two when writing the .??s
- % sorted result.
- \edef\temp{%
- \write\writeto{%
- \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
- }%
- \temp
-}
-
-% Take care of unwanted page breaks:
-%
-% If a skip is the last thing on the list now, preserve it
-% by backing up by \lastskip, doing the \write, then inserting
-% the skip again. Otherwise, the whatsit generated by the
-% \write will make \lastskip zero. The result is that sequences
-% like this:
-% @end defun
-% @tindex whatever
-% @defun ...
-% will have extra space inserted, because the \medbreak in the
-% start of the @defun won't see the skip inserted by the @end of
-% the previous defun.
-%
-% But don't do any of this if we're not in vertical mode. We
-% don't want to do a \vskip and prematurely end a paragraph.
-%
-% Avoid page breaks due to these extra skips, too.
-%
-\def\dosubindsanitize{%
- % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
- \skip0 = \lastskip
- \count255 = \lastpenalty
- %
- % If \lastskip is nonzero, that means the last item was a
- % skip. And since a skip is discardable, that means this
- % -\skip0 glue we're inserting is preceded by a
- % non-discardable item, therefore it is not a potential
- % breakpoint, therefore no \nobreak needed.
- \ifdim\lastskip = 0pt \else \vskip-\skip0 \fi
- %
- \dosubindwrite
- %
- \ifdim\skip0 = 0pt
- % if \lastskip was zero, perhaps the last item was a
- % penalty, and perhaps it was >=10000, e.g., a \nobreak.
- % In that case, we want to re-insert the penalty; since we
- % just inserted a non-discardable item, any following glue
- % (such as a \parskip) would be a breakpoint. For example:
- % @deffn deffn-whatever
- % @vindex index-whatever
- % Description.
- % would allow a break between the index-whatever whatsit
- % and the "Description." paragraph.
- \ifnum\count255>9999 \nobreak \fi
- \else
- % On the other hand, if we had a nonzero \lastskip,
- % this make-up glue would be preceded by a non-discardable item
- % (the whatsit from the \write), so we must insert a \nobreak.
- \nobreak\vskip\skip0
- \fi
-}
-
-% The index entry written in the file actually looks like
-% \entry {sortstring}{page}{topic}
-% or
-% \entry {sortstring}{page}{topic}{subtopic}
-% The texindex program reads in these files and writes files
-% containing these kinds of lines:
-% \initial {c}
-% before the first topic whose initial is c
-% \entry {topic}{pagelist}
-% for a topic that is used without subtopics
-% \primary {topic}
-% for the beginning of a topic that is used with subtopics
-% \secondary {subtopic}{pagelist}
-% for each subtopic.
-
-% Define the user-accessible indexing commands
-% @findex, @vindex, @kindex, @cindex.
-
-\def\findex {\fnindex}
-\def\kindex {\kyindex}
-\def\cindex {\cpindex}
-\def\vindex {\vrindex}
-\def\tindex {\tpindex}
-\def\pindex {\pgindex}
-
-\def\cindexsub {\begingroup\obeylines\cindexsub}
-{\obeylines %
-\gdef\cindexsub "#1" #2^^M{\endgroup %
-\dosubind{cp}{#2}{#1}}}
-
-% Define the macros used in formatting output of the sorted index material.
-
-% @printindex causes a particular index (the ??s file) to get printed.
-% It does not print any chapter heading (usually an @unnumbered).
-%
-\def\printindex{\parsearg\doprintindex}
-\def\doprintindex#1{\begingroup
- \dobreak \chapheadingskip{10000}%
- %
- \smallfonts \rm
- \tolerance = 9500
- \everypar = {}% don't want the \kern\-parindent from indentation suppression.
- \indexbreaks
- %
- % See if the index file exists and is nonempty.
- % Change catcode of @ here so that if the index file contains
- % \initial {@}
- % as its first line, TeX doesn't complain about mismatched braces
- % (because it thinks @} is a control sequence).
- \catcode`\@ = 11
- \openin 1 \jobname.#1s
- \ifeof 1
- % \enddoublecolumns gets confused if there is no text in the index,
- % and it loses the chapter title and the aux file entries for the
- % index. The easiest way to prevent this problem is to make sure
- % there is some text.
- \putwordIndexNonexistent
- \else
- %
- % If the index file exists but is empty, then \openin leaves \ifeof
- % false. We have to make TeX try to read something from the file, so
- % it can discover if there is anything in it.
- \read 1 to \temp
- \ifeof 1
- \putwordIndexIsEmpty
- \else
- % Index files are almost Texinfo source, but we use \ as the escape
- % character. It would be better to use @, but that's too big a change
- % to make right now.
- \def\indexbackslash{\rawbackslashxx}%
- \catcode`\\ = 0
- \escapechar = `\\
- \begindoublecolumns
- \input \jobname.#1s
- \enddoublecolumns
- \fi
- \fi
- \closein 1
-\endgroup}
-
-% These macros are used by the sorted index file itself.
-% Change them to control the appearance of the index.
-
-\def\initial#1{{%
- % Some minor font changes for the special characters.
- \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
- %
- % Remove any glue we may have, we'll be inserting our own.
- \removelastskip
- %
- % We like breaks before the index initials, so insert a bonus.
- \penalty -300
- %
- % Typeset the initial. Making this add up to a whole number of
- % baselineskips increases the chance of the dots lining up from column
- % to column. It still won't often be perfect, because of the stretch
- % we need before each entry, but it's better.
- %
- % No shrink because it confuses \balancecolumns.
- \vskip 1.67\baselineskip plus .5\baselineskip
- \leftline{\secbf #1}%
- \vskip .33\baselineskip plus .1\baselineskip
- %
- % Do our best not to break after the initial.
- \nobreak
-}}
-
-% This typesets a paragraph consisting of #1, dot leaders, and then #2
-% flush to the right margin. It is used for index and table of contents
-% entries. The paragraph is indented by \leftskip.
-%
-\def\entry#1#2{\begingroup
- %
- % Start a new paragraph if necessary, so our assignments below can't
- % affect previous text.
- \par
- %
- % Do not fill out the last line with white space.
- \parfillskip = 0in
- %
- % No extra space above this paragraph.
- \parskip = 0in
- %
- % Do not prefer a separate line ending with a hyphen to fewer lines.
- \finalhyphendemerits = 0
- %
- % \hangindent is only relevant when the entry text and page number
- % don't both fit on one line. In that case, bob suggests starting the
- % dots pretty far over on the line. Unfortunately, a large
- % indentation looks wrong when the entry text itself is broken across
- % lines. So we use a small indentation and put up with long leaders.
- %
- % \hangafter is reset to 1 (which is the value we want) at the start
- % of each paragraph, so we need not do anything with that.
- \hangindent = 2em
- %
- % When the entry text needs to be broken, just fill out the first line
- % with blank space.
- \rightskip = 0pt plus1fil
- %
- % A bit of stretch before each entry for the benefit of balancing columns.
- \vskip 0pt plus1pt
- %
- % Start a ``paragraph'' for the index entry so the line breaking
- % parameters we've set above will have an effect.
- \noindent
- %
- % Insert the text of the index entry. TeX will do line-breaking on it.
- #1%
- % The following is kludged to not output a line of dots in the index if
- % there are no page numbers. The next person who breaks this will be
- % cursed by a Unix daemon.
- \def\tempa{{\rm }}%
- \def\tempb{#2}%
- \edef\tempc{\tempa}%
- \edef\tempd{\tempb}%
- \ifx\tempc\tempd\ \else%
- %
- % If we must, put the page number on a line of its own, and fill out
- % this line with blank space. (The \hfil is overwhelmed with the
- % fill leaders glue in \indexdotfill if the page number does fit.)
- \hfil\penalty50
- \null\nobreak\indexdotfill % Have leaders before the page number.
- %
- % The `\ ' here is removed by the implicit \unskip that TeX does as
- % part of (the primitive) \par. Without it, a spurious underfull
- % \hbox ensues.
- \ifpdf
- \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
- \else
- \ #2% The page number ends the paragraph.
- \fi
- \fi%
- \par
-\endgroup}
-
-% Like \dotfill except takes at least 1 em.
-\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
-
-\def\primary #1{\line{#1\hfil}}
-
-\newskip\secondaryindent \secondaryindent=0.5cm
-\def\secondary#1#2{{%
- \parfillskip=0in
- \parskip=0in
- \hangindent=1in
- \hangafter=1
- \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
- \ifpdf
- \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
- \else
- #2
- \fi
- \par
-}}
-
-% Define two-column mode, which we use to typeset indexes.
-% Adapted from the TeXbook, page 416, which is to say,
-% the manmac.tex format used to print the TeXbook itself.
-\catcode`\@=11
-
-\newbox\partialpage
-\newdimen\doublecolumnhsize
-
-\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
- % Grab any single-column material above us.
- \output = {%
- %
- % Here is a possibility not foreseen in manmac: if we accumulate a
- % whole lot of material, we might end up calling this \output
- % routine twice in a row (see the doublecol-lose test, which is
- % essentially a couple of indexes with @setchapternewpage off). In
- % that case we just ship out what is in \partialpage with the normal
- % output routine. Generally, \partialpage will be empty when this
- % runs and this will be a no-op. See the indexspread.tex test case.
- \ifvoid\partialpage \else
- \onepageout{\pagecontents\partialpage}%
- \fi
- %
- \global\setbox\partialpage = \vbox{%
- % Unvbox the main output page.
- \unvbox\PAGE
- \kern-\topskip \kern\baselineskip
- }%
- }%
- \eject % run that output routine to set \partialpage
- %
- % Use the double-column output routine for subsequent pages.
- \output = {\doublecolumnout}%
- %
- % Change the page size parameters. We could do this once outside this
- % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
- % format, but then we repeat the same computation. Repeating a couple
- % of assignments once per index is clearly meaningless for the
- % execution time, so we may as well do it in one place.
- %
- % First we halve the line length, less a little for the gutter between
- % the columns. We compute the gutter based on the line length, so it
- % changes automatically with the paper format. The magic constant
- % below is chosen so that the gutter has the same value (well, +-<1pt)
- % as it did when we hard-coded it.
- %
- % We put the result in a separate register, \doublecolumhsize, so we
- % can restore it in \pagesofar, after \hsize itself has (potentially)
- % been clobbered.
- %
- \doublecolumnhsize = \hsize
- \advance\doublecolumnhsize by -.04154\hsize
- \divide\doublecolumnhsize by 2
- \hsize = \doublecolumnhsize
- %
- % Double the \vsize as well. (We don't need a separate register here,
- % since nobody clobbers \vsize.)
- \vsize = 2\vsize
-}
-
-% The double-column output routine for all double-column pages except
-% the last.
-%
-\def\doublecolumnout{%
- \splittopskip=\topskip \splitmaxdepth=\maxdepth
- % Get the available space for the double columns -- the normal
- % (undoubled) page height minus any material left over from the
- % previous page.
- \dimen@ = \vsize
- \divide\dimen@ by 2
- \advance\dimen@ by -\ht\partialpage
- %
- % box0 will be the left-hand column, box2 the right.
- \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
- \onepageout\pagesofar
- \unvbox255
- \penalty\outputpenalty
-}
-%
-% Re-output the contents of the output page -- any previous material,
-% followed by the two boxes we just split, in box0 and box2.
-\def\pagesofar{%
- \unvbox\partialpage
- %
- \hsize = \doublecolumnhsize
- \wd0=\hsize \wd2=\hsize
- \hbox to\pagewidth{\box0\hfil\box2}%
-}
-%
-% All done with double columns.
-\def\enddoublecolumns{%
- \output = {%
- % Split the last of the double-column material. Leave it on the
- % current page, no automatic page break.
- \balancecolumns
- %
- % If we end up splitting too much material for the current page,
- % though, there will be another page break right after this \output
- % invocation ends. Having called \balancecolumns once, we do not
- % want to call it again. Therefore, reset \output to its normal
- % definition right away. (We hope \balancecolumns will never be
- % called on to balance too much material, but if it is, this makes
- % the output somewhat more palatable.)
- \global\output = {\onepageout{\pagecontents\PAGE}}%
- }%
- \eject
- \endgroup % started in \begindoublecolumns
- %
- % \pagegoal was set to the doubled \vsize above, since we restarted
- % the current page. We're now back to normal single-column
- % typesetting, so reset \pagegoal to the normal \vsize (after the
- % \endgroup where \vsize got restored).
- \pagegoal = \vsize
-}
-%
-% Called at the end of the double column material.
-\def\balancecolumns{%
- \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
- \dimen@ = \ht0
- \advance\dimen@ by \topskip
- \advance\dimen@ by-\baselineskip
- \divide\dimen@ by 2 % target to split to
- %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
- \splittopskip = \topskip
- % Loop until we get a decent breakpoint.
- {%
- \vbadness = 10000
- \loop
- \global\setbox3 = \copy0
- \global\setbox1 = \vsplit3 to \dimen@
- \ifdim\ht3>\dimen@
- \global\advance\dimen@ by 1pt
- \repeat
- }%
- %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
- \setbox0=\vbox to\dimen@{\unvbox1}%
- \setbox2=\vbox to\dimen@{\unvbox3}%
- %
- \pagesofar
-}
-\catcode`\@ = \other
-
-
-\message{sectioning,}
-% Chapters, sections, etc.
-
-% \unnumberedno is an oxymoron, of course. But we count the unnumbered
-% sections so that we can refer to them unambiguously in the pdf
-% outlines by their "section number". We avoid collisions with chapter
-% numbers by starting them at 10000. (If a document ever has 10000
-% chapters, we're in trouble anyway, I'm sure.)
-\newcount\unnumberedno \unnumberedno = 10000
-\newcount\chapno
-\newcount\secno \secno=0
-\newcount\subsecno \subsecno=0
-\newcount\subsubsecno \subsubsecno=0
-
-% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount\appendixno \appendixno = `\@
-%
-% \def\appendixletter{\char\the\appendixno}
-% We do the following ugly conditional instead of the above simple
-% construct for the sake of pdftex, which needs the actual
-% letter in the expansion, not just typeset.
-%
-\def\appendixletter{%
- \ifnum\appendixno=`A A%
- \else\ifnum\appendixno=`B B%
- \else\ifnum\appendixno=`C C%
- \else\ifnum\appendixno=`D D%
- \else\ifnum\appendixno=`E E%
- \else\ifnum\appendixno=`F F%
- \else\ifnum\appendixno=`G G%
- \else\ifnum\appendixno=`H H%
- \else\ifnum\appendixno=`I I%
- \else\ifnum\appendixno=`J J%
- \else\ifnum\appendixno=`K K%
- \else\ifnum\appendixno=`L L%
- \else\ifnum\appendixno=`M M%
- \else\ifnum\appendixno=`N N%
- \else\ifnum\appendixno=`O O%
- \else\ifnum\appendixno=`P P%
- \else\ifnum\appendixno=`Q Q%
- \else\ifnum\appendixno=`R R%
- \else\ifnum\appendixno=`S S%
- \else\ifnum\appendixno=`T T%
- \else\ifnum\appendixno=`U U%
- \else\ifnum\appendixno=`V V%
- \else\ifnum\appendixno=`W W%
- \else\ifnum\appendixno=`X X%
- \else\ifnum\appendixno=`Y Y%
- \else\ifnum\appendixno=`Z Z%
- % The \the is necessary, despite appearances, because \appendixletter is
- % expanded while writing the .toc file. \char\appendixno is not
- % expandable, thus it is written literally, thus all appendixes come out
- % with the same letter (or @) in the toc without it.
- \else\char\the\appendixno
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
-
-% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it. @section does likewise.
-% However, they are not reliable, because we don't use marks.
-\def\thischapter{}
-\def\thissection{}
-
-\newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
-
-% @raisesections: treat @section as chapter, @subsection as section, etc.
-\def\raisesections{\global\advance\secbase by -1}
-\let\up=\raisesections % original BFox name
-
-% @lowersections: treat @chapter as section, @section as subsection, etc.
-\def\lowersections{\global\advance\secbase by 1}
-\let\down=\lowersections % original BFox name
-
-% Choose a numbered-heading macro
-% #1 is heading level if unmodified by @raisesections or @lowersections
-% #2 is text for heading
-\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \chapterzzz{#2}%
- \or \seczzz{#2}%
- \or \numberedsubseczzz{#2}%
- \or \numberedsubsubseczzz{#2}%
- \else
- \ifnum \absseclevel<0 \chapterzzz{#2}%
- \else \numberedsubsubseczzz{#2}%
- \fi
- \fi
- \suppressfirstparagraphindent
-}
-
-% like \numhead, but chooses appendix heading levels
-\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \appendixzzz{#2}%
- \or \appendixsectionzzz{#2}%
- \or \appendixsubseczzz{#2}%
- \or \appendixsubsubseczzz{#2}%
- \else
- \ifnum \absseclevel<0 \appendixzzz{#2}%
- \else \appendixsubsubseczzz{#2}%
- \fi
- \fi
- \suppressfirstparagraphindent
-}
-
-% like \numhead, but chooses numberless heading levels
-\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
- \ifcase\absseclevel
- \unnumberedzzz{#2}%
- \or \unnumberedseczzz{#2}%
- \or \unnumberedsubseczzz{#2}%
- \or \unnumberedsubsubseczzz{#2}%
- \else
- \ifnum \absseclevel<0 \unnumberedzzz{#2}%
- \else \unnumberedsubsubseczzz{#2}%
- \fi
- \fi
- \suppressfirstparagraphindent
-}
-
-% @chapter, @appendix, @unnumbered.
-%
-\outer\def\chapter{\parsearg\chapteryyy}
-\def\chapteryyy#1{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz#1{%
- % section resetting is \global in case the chapter is in a group, such
- % as an @include file.
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\chapno by 1
- \message{\putwordChapter\space \the\chapno}%
- %
- % Write the actual heading.
- \chapmacro{#1}{Ynumbered}{\the\chapno}%
- %
- % So @section and the like are numbered underneath this chapter.
- \global\let\section = \numberedsec
- \global\let\subsection = \numberedsubsec
- \global\let\subsubsection = \numberedsubsubsec
-}
-
-\outer\def\appendix{\parsearg\appendixyyy}
-\def\appendixyyy#1{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\appendixno by 1
- \def\appendixnum{\putwordAppendix\space \appendixletter}%
- \message{\appendixnum}%
- \chapmacro{#1}{Yappendix}{\appendixletter}%
- \global\let\section = \appendixsec
- \global\let\subsection = \appendixsubsec
- \global\let\subsubsection = \appendixsubsubsec
-}
-
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\def\centerchap{\parsearg\centerchapyyy}
-\def\centerchapyyy#1{{\unnumberedyyy{#1}}}
-
-% @top is like @unnumbered.
-\outer\def\top{\parsearg\unnumberedyyy}
-
-\outer\def\unnumbered{\parsearg\unnumberedyyy}
-\def\unnumberedyyy#1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\unnumberedno by 1
- %
- % This used to be simply \message{#1}, but TeX fully expands the
- % argument to \message. Therefore, if #1 contained @-commands, TeX
- % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
- % expanded @cite (which turns out to cause errors because \cite is meant
- % to be executed, not expanded).
- %
- % Anyway, we don't want the fully-expanded definition of @cite to appear
- % as a result of the \message, we just want `@cite' itself. We use
- % \the<toks register> to achieve this: TeX expands \the<toks> only once,
- % simply yielding the contents of <toks register>. (We also do this for
- % the toc entries.)
- \toks0 = {#1}\message{(\the\toks0)}%
- %
- \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
- %
- \global\let\section = \unnumberedsec
- \global\let\subsection = \unnumberedsubsec
- \global\let\subsubsection = \unnumberedsubsubsec
-}
-
-% Sections.
-\outer\def\numberedsec{\parsearg\secyyy}
-\def\secyyy#1{\numhead1{#1}} % normally calls seczzz
-\def\seczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
-}
-
-\outer\def\appendixsection{\parsearg\appendixsecyyy}
-\outer\def\appendixsec{\parsearg\appendixsecyyy}
-\def\appendixsecyyy#1{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
-}
-
-\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
-\def\unnumberedsecyyy#1{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
-}
-
-% Subsections.
-\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
-\def\numberedsubsecyyy#1{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
-}
-
-\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
-\def\appendixsubsecyyy#1{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Yappendix}%
- {\appendixletter.\the\secno.\the\subsecno}%
-}
-
-\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
-\def\unnumberedsubsecyyy#1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno}%
-}
-
-% Subsubsections.
-\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
-\def\numberedsubsubsecyyy#1{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynumbered}%
- {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
-\def\appendixsubsubsecyyy#1{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Yappendix}%
- {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
-\def\unnumberedsubsubsecyyy#1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-% These are variants which are not "outer", so they can appear in @ifinfo.
-% Actually, they are now be obsolete; ordinary section commands should work.
-\def\infotop{\parsearg\unnumberedzzz}
-\def\infounnumbered{\parsearg\unnumberedzzz}
-\def\infounnumberedsec{\parsearg\unnumberedseczzz}
-\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
-\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
-
-\def\infoappendix{\parsearg\appendixzzz}
-\def\infoappendixsec{\parsearg\appendixseczzz}
-\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
-\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
-
-\def\infochapter{\parsearg\chapterzzz}
-\def\infosection{\parsearg\sectionzzz}
-\def\infosubsection{\parsearg\subsectionzzz}
-\def\infosubsubsection{\parsearg\subsubsectionzzz}
-
-% These macros control what the section commands do, according
-% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
-% Define them by default for a numbered chapter.
-\let\section = \numberedsec
-\let\subsection = \numberedsubsec
-\let\subsubsection = \numberedsubsubsec
-
-% Define @majorheading, @heading and @subheading
-
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-% 1) We use \vbox rather than the earlier \line to permit
-% overlong headings to fold.
-% 2) \hyphenpenalty is set to 10000 because hyphenation in a
-% heading is obnoxious; this forbids it.
-% 3) Likewise, headings look best if no \parindent is used, and
-% if justification is not attempted. Hence \raggedright.
-
-
-\def\majorheading{%
- {\advance\chapheadingskip by 10pt \chapbreak }%
- \parsearg\chapheadingzzz
-}
-
-\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
-\def\chapheadingzzz#1{%
- {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}%
- \bigskip \par\penalty 200\relax
- \suppressfirstparagraphindent
-}
-
-% @heading, @subheading, @subsubheading.
-\def\heading{\parsearg\doheading}
-\def\subheading{\parsearg\dosubheading}
-\def\subsubheading{\parsearg\dosubsubheading}
-\def\doheading#1{\sectionheading{#1}{sec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-\def\dosubheading#1{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-\def\dosubsubheading#1{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-
-% These macros generate a chapter, section, etc. heading only
-% (including whitespace, linebreaking, etc. around it),
-% given all the information in convenient, parsed form.
-
-%%% Args are the skip and penalty (usually negative)
-\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-
-%%% Define plain chapter starts, and page on/off switching for it
-% Parameter controlling skip before chapter headings (if needed)
-
-\newskip\chapheadingskip
-
-\def\chapbreak{\dobreak \chapheadingskip {-4000}}
-\def\chappager{\par\vfill\supereject}
-\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
-
-\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
-
-\def\CHAPPAGoff{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chapbreak
-\global\let\pagealignmacro=\chappager}
-
-\def\CHAPPAGon{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chappager
-\global\let\pagealignmacro=\chappager
-\global\def\HEADINGSon{\HEADINGSsingle}}
-
-\def\CHAPPAGodd{%
-\global\let\contentsalignmacro = \chapoddpage
-\global\let\pchapsepmacro=\chapoddpage
-\global\let\pagealignmacro=\chapoddpage
-\global\def\HEADINGSon{\HEADINGSdouble}}
-
-\CHAPPAGon
-
-\def\CHAPFplain{%
-\global\let\chapmacro=\chfplain
-\global\let\centerchapmacro=\centerchfplain}
-
-% Normal chapter opening.
-%
-% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
-% Yappendix, Yomitfromtoc), #3 the chapter number.
-%
-% To test against our argument.
-\def\Ynothingkeyword{Ynothing}
-\def\Yomitfromtockeyword{Yomitfromtoc}
-\def\Yappendixkeyword{Yappendix}
-%
-\def\chfplain#1#2#3{%
- \pchapsepmacro
- {%
- \chapfonts \rm
- %
- % Have to define \thissection before calling \donoderef, because the
- % xref code eventually uses it. On the other hand, it has to be called
- % after \pchapsepmacro, or the headline will change too soon.
- \gdef\thissection{#1}%
- \gdef\thischaptername{#1}%
- %
- % Only insert the separating space if we have a chapter/appendix
- % number, and don't print the unnumbered ``number''.
- \def\temptype{#2}%
- \ifx\temptype\Ynothingkeyword
- \setbox0 = \hbox{}%
- \def\toctype{unnchap}%
- \def\thischapter{#1}%
- \else\ifx\temptype\Yomitfromtockeyword
- \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
- \def\toctype{omit}%
- \xdef\thischapter{}%
- \else\ifx\temptype\Yappendixkeyword
- \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
- \def\toctype{app}%
- % We don't substitute the actual chapter name into \thischapter
- % because we don't want its macros evaluated now. And we don't
- % use \thissection because that changes with each section.
- %
- \xdef\thischapter{\putwordAppendix{} \appendixletter:
- \noexpand\thischaptername}%
- \else
- \setbox0 = \hbox{#3\enspace}%
- \def\toctype{numchap}%
- \xdef\thischapter{\putwordChapter{} \the\chapno:
- \noexpand\thischaptername}%
- \fi\fi\fi
- %
- % Write the toc entry for this chapter. Must come before the
- % \donoderef, because we include the current node name in the toc
- % entry, and \donoderef resets it to empty.
- \writetocentry{\toctype}{#1}{#3}%
- %
- % For pdftex, we have to write out the node definition (aka, make
- % the pdfdest) after any page break, but before the actual text has
- % been typeset. If the destination for the pdf outline is after the
- % text, then jumping from the outline may wind up with the text not
- % being visible, for instance under high magnification.
- \donoderef{#2}%
- %
- % Typeset the actual heading.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent=\wd0 \centerparametersmaybe
- \unhbox0 #1\par}%
- }%
- \nobreak\bigskip % no page break after a chapter title
- \nobreak
-}
-
-% @centerchap -- centered and unnumbered.
-\let\centerparametersmaybe = \relax
-\def\centerchfplain#1{{%
- \def\centerparametersmaybe{%
- \advance\rightskip by 3\rightskip
- \leftskip = \rightskip
- \parfillskip = 0pt
- }%
- \chfplain{#1}{Ynothing}{}%
-}}
-
-\CHAPFplain % The default
-
-% I don't think this chapter style is supported any more, so I'm not
-% updating it with the new noderef stuff. We'll see. --karl, 11aug03.
-%
-\def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\nobreak
-}
-
-\def\chfopen #1#2{\chapoddpage {\chapfonts
-\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
-\par\penalty 5000 %
-}
-
-\def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt
- \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
-}
-
-\def\CHAPFopen{%
-\global\let\chapmacro=\chfopen
-\global\let\centerchapmacro=\centerchfopen}
-
-
-% Section titles. These macros combine the section number parts and
-% call the generic \sectionheading to do the printing.
-%
-\newskip\secheadingskip
-\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
-
-% Subsection titles.
-\newskip\subsecheadingskip
-\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
-
-% Subsubsection titles.
-\def\subsubsecheadingskip{\subsecheadingskip}
-\def\subsubsecheadingbreak{\subsecheadingbreak}
-
-
-% Print any size, any type, section title.
-%
-% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
-% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
-% section number.
-%
-\def\sectionheading#1#2#3#4{%
- {%
- % Switch to the right set of fonts.
- \csname #2fonts\endcsname \rm
- %
- % Insert space above the heading.
- \csname #2headingbreak\endcsname
- %
- % Only insert the space after the number if we have a section number.
- \def\sectionlevel{#2}%
- \def\temptype{#3}%
- %
- \ifx\temptype\Ynothingkeyword
- \setbox0 = \hbox{}%
- \def\toctype{unn}%
- \gdef\thissection{#1}%
- \else\ifx\temptype\Yomitfromtockeyword
- % for @headings -- no section number, don't include in toc,
- % and don't redefine \thissection.
- \setbox0 = \hbox{}%
- \def\toctype{omit}%
- \let\sectionlevel=\empty
- \else\ifx\temptype\Yappendixkeyword
- \setbox0 = \hbox{#4\enspace}%
- \def\toctype{app}%
- \gdef\thissection{#1}%
- \else
- \setbox0 = \hbox{#4\enspace}%
- \def\toctype{num}%
- \gdef\thissection{#1}%
- \fi\fi\fi
- %
- % Write the toc entry (before \donoderef). See comments in \chfplain.
- \writetocentry{\toctype\sectionlevel}{#1}{#4}%
- %
- % Write the node reference (= pdf destination for pdftex).
- % Again, see comments in \chfplain.
- \donoderef{#3}%
- %
- % Output the actual section heading.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent=\wd0 % zero if no section number
- \unhbox0 #1}%
- }%
- % Add extra space after the heading -- half of whatever came above it.
- % Don't allow stretch, though.
- \kern .5 \csname #2headingskip\endcsname
- %
- % Do not let the kern be a potential breakpoint, as it would be if it
- % was followed by glue.
- \nobreak
- %
- % We'll almost certainly start a paragraph next, so don't let that
- % glue accumulate. (Not a breakpoint because it's preceded by a
- % discardable item.)
- \vskip-\parskip
- %
- % This \nobreak is purely so the last item on the list is a \penalty
- % of 10000. This is so other code, for instance \parsebodycommon, can
- % check for and avoid allowing breakpoints. Otherwise, it would
- % insert a valid breakpoint between:
- % @section sec-whatever
- % @deffn def-whatever
- \nobreak
-}
-
-
-\message{toc,}
-% Table of contents.
-\newwrite\tocfile
-
-% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.
-%
-% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
-% We append the current node name (if any) and page number as additional
-% arguments for the \{chap,sec,...}entry macros which will eventually
-% read this. The node name is used in the pdf outlines as the
-% destination to jump to.
-%
-% We open the .toc file for writing here instead of at @setfilename (or
-% any other fixed time) so that @contents can be anywhere in the document.
-% But if #1 is `omit', then we don't do anything. This is used for the
-% table of contents chapter openings themselves.
-%
-\newif\iftocfileopened
-\def\omitkeyword{omit}%
-%
-\def\writetocentry#1#2#3{%
- \edef\writetoctype{#1}%
- \ifx\writetoctype\omitkeyword \else
- \iftocfileopened\else
- \immediate\openout\tocfile = \jobname.toc
- \global\tocfileopenedtrue
- \fi
- %
- \iflinks
- \toks0 = {#2}%
- \toks2 = \expandafter{\lastnode}%
- \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}%
- {\the\toks2}{\noexpand\folio}}}%
- \temp
- \fi
- \fi
- %
- % Tell \shipout to create a pdf destination on each page, if we're
- % writing pdf. These are used in the table of contents. We can't
- % just write one on every page because the title pages are numbered
- % 1 and 2 (the page numbers aren't printed), and so are the first
- % two pages of the document. Thus, we'd have two destinations named
- % `1', and two named `2'.
- \ifpdf \global\pdfmakepagedesttrue \fi
-}
-
-\newskip\contentsrightmargin \contentsrightmargin=1in
-\newcount\savepageno
-\newcount\lastnegativepageno \lastnegativepageno = -1
-
-% Prepare to read what we've written to \tocfile.
-%
-\def\startcontents#1{%
- % If @setchapternewpage on, and @headings double, the contents should
- % start on an odd page, unlike chapters. Thus, we maintain
- % \contentsalignmacro in parallel with \pagealignmacro.
- % From: Torbjorn Granlund <tege@matematik.su.se>
- \contentsalignmacro
- \immediate\closeout\tocfile
- %
- % Don't need to put `Contents' or `Short Contents' in the headline.
- % It is abundantly clear what they are.
- \def\thischapter{}%
- \chapmacro{#1}{Yomitfromtoc}{}%
- %
- \savepageno = \pageno
- \begingroup % Set up to handle contents files properly.
- \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
- % We can't do this, because then an actual ^ in a section
- % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
- %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
- \raggedbottom % Worry more about breakpoints than the bottom.
- \advance\hsize by -\contentsrightmargin % Don't use the full line length.
- %
- % Roman numerals for page numbers.
- \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
-}
-
-
-% Normal (long) toc.
-\def\contents{%
- \startcontents{\putwordTOC}%
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \closein 1
- \input \jobname.toc
- \fi
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \pdfmakeoutlines
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
-}
-
-% And just the chapters.
-\def\summarycontents{%
- \startcontents{\putwordShortTOC}%
- %
- \let\numchapentry = \shortchapentry
- \let\appentry = \shortchapentry
- \let\unnchapentry = \shortunnchapentry
- % We want a true roman here for the page numbers.
- \secfonts
- \let\rm=\shortcontrm \let\bf=\shortcontbf
- \let\sl=\shortcontsl \let\tt=\shortconttt
- \rm
- \hyphenpenalty = 10000
- \advance\baselineskip by 1pt % Open it up a little.
- \def\numsecentry##1##2##3##4{}
- \let\appsecentry = \numsecentry
- \let\unnsecentry = \numsecentry
- \let\numsubsecentry = \numsecentry
- \let\appsubsecentry = \numsecentry
- \let\unnsubsecentry = \numsecentry
- \let\numsubsubsecentry = \numsecentry
- \let\appsubsubsecentry = \numsecentry
- \let\unnsubsubsecentry = \numsecentry
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \closein 1
- \input \jobname.toc
- \fi
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
-}
-\let\shortcontents = \summarycontents
-
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
-%
-\def\shortchaplabel#1{%
- % This space should be enough, since a single number is .5em, and the
- % widest letter (M) is 1em, at least in the Computer Modern fonts.
- % But use \hss just in case.
- % (This space doesn't include the extra space that gets added after
- % the label; that gets put in by \shortchapentry above.)
- %
- % We'd like to right-justify chapter numbers, but that looks strange
- % with appendix letters. And right-justifying numbers and
- % left-justifying letters looks strange when there is less than 10
- % chapters. Have to read the whole toc once to know how many chapters
- % there are before deciding ...
- \hbox to 1em{#1\hss}%
-}
-
-% These macros generate individual entries in the table of contents.
-% The first argument is the chapter or section name.
-% The last argument is the page number.
-% The arguments in between are the chapter number, section number, ...
-
-% Chapters, in the main contents.
-\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
-%
-% Chapters, in the short toc.
-% See comments in \dochapentry re vbox and related settings.
-\def\shortchapentry#1#2#3#4{%
- \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
-}
-
-% Appendices, in the main contents.
-% Need the word Appendix, and a fixed-size box.
-%
-\def\appendixbox#1{%
- % We use M since it's probably the widest letter.
- \setbox0 = \hbox{\putwordAppendix{} M}%
- \hbox to \wd0{\putwordAppendix{} #1\hss}}
-%
-\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
-
-% Unnumbered chapters.
-\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
-\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
-
-% Sections.
-\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
-\let\appsecentry=\numsecentry
-\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
-
-% Subsections.
-\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsecentry=\numsubsecentry
-\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
-
-% And subsubsections.
-\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsubsecentry=\numsubsubsecentry
-\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
-
-% This parameter controls the indentation of the various levels.
-\newdimen\tocindent \tocindent = 2pc
-
-% Now for the actual typesetting. In all these, #1 is the text and #2 is the
-% page number.
-%
-% If the toc has to be broken over pages, we want it to be at chapters
-% if at all possible; hence the \penalty.
-\def\dochapentry#1#2{%
- \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
- \begingroup
- \chapentryfonts
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
- \endgroup
- \nobreak\vskip .25\baselineskip plus.1\baselineskip
-}
-
-\def\dosecentry#1#2{\begingroup
- \secentryfonts \leftskip=\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsecentry#1#2{\begingroup
- \subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsubsecentry#1#2{\begingroup
- \subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-% Final typesetting of a toc entry; we use the same \entry macro as for
-% the index entries, but we want to suppress hyphenation here. (We
-% can't do that in the \entry macro, since index entries might consist
-% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
-\def\tocentry#1#2{\begingroup
- \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
- % Do not use \turnoffactive in these arguments. Since the toc is
- % typeset in cmr, characters such as _ would come out wrong; we
- % have to do the usual translation tricks.
- \entry{#1}{#2}%
-\endgroup}
-
-% Space between chapter (or whatever) number and the title.
-\def\labelspace{\hskip1em \relax}
-
-\def\dopageno#1{{\rm #1}}
-\def\doshortpageno#1{{\rm #1}}
-
-\def\chapentryfonts{\secfonts \rm}
-\def\secentryfonts{\textfonts}
-\def\subsecentryfonts{\textfonts}
-\def\subsubsecentryfonts{\textfonts}
-
-
-\message{environments,}
-% @foo ... @end foo.
-
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
-% Since these characters are used in examples, it should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-%
-\def\point{$\star$}
-\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% The @error{} command.
-% Adapted from the TeXbook's \boxit.
-%
-\newbox\errorbox
-%
-{\tentt \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
-%
-\global\setbox\errorbox=\hbox to \dimen0{\hfil
- \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
- \advance\hsize by -2\dimen2 % Rules.
- \vbox{
- \hrule height\dimen2
- \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
- \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
- \kern3pt\vrule width\dimen2}% Space to right.
- \hrule height\dimen2}
- \hfil}
-%
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
-% @tex ... @end tex escapes into raw Tex temporarily.
-% One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain tex @ character.
-
-\def\tex{\begingroup
- \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
- \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
- \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
- \catcode `\%=14
- \catcode `\+=\other
- \catcode `\"=\other
- \catcode `\==\other
- \catcode `\|=\other
- \catcode `\<=\other
- \catcode `\>=\other
- \escapechar=`\\
- %
- \let\b=\ptexb
- \let\bullet=\ptexbullet
- \let\c=\ptexc
- \let\,=\ptexcomma
- \let\.=\ptexdot
- \let\dots=\ptexdots
- \let\equiv=\ptexequiv
- \let\!=\ptexexclam
- \let\i=\ptexi
- \let\indent=\ptexindent
- \let\noindent=\ptexnoindent
- \let\{=\ptexlbrace
- \let\+=\tabalign
- \let\}=\ptexrbrace
- \let\/=\ptexslash
- \let\*=\ptexstar
- \let\t=\ptext
- %
- \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
- \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
- \def\@{@}%
-\let\Etex=\endgroup}
-
-% Define @lisp ... @end lisp.
-% @lisp does a \begingroup so it can rebind things,
-% including the definition of @end lisp (which normally is erroneous).
-
-% Amount to narrow the margins by for @lisp.
-\newskip\lispnarrowing \lispnarrowing=0.4in
-
-% This is the definition that ^^M gets inside @lisp, @example, and other
-% such environments. \null is better than a space, since it doesn't
-% have any width.
-\def\lisppar{\null\endgraf}
-
-% Make each space character in the input produce a normal interword
-% space in the output. Don't allow a line break at this space, as this
-% is used only in environments like @example, where each line of input
-% should produce a line of output anyway.
-%
-{\obeyspaces %
-\gdef\sepspaces{\obeyspaces\let =\tie}}
-
-% Define \obeyedspace to be our active space, whatever it is. This is
-% for use in \parsearg.
-{\sepspaces%
-\global\let\obeyedspace= }
-
-% This space is always present above and below environments.
-\newskip\envskipamount \envskipamount = 0pt
-
-% Make spacing and below environment symmetrical. We use \parskip here
-% to help in doing that, since in @example-like environments \parskip
-% is reset to zero; thus the \afterenvbreak inserts no space -- but the
-% start of the next paragraph will insert \parskip.
-%
-\def\aboveenvbreak{{%
- % =10000 instead of <10000 because of a special case in \itemzzz, q.v.
- \ifnum \lastpenalty=10000 \else
- \advance\envskipamount by \parskip
- \endgraf
- \ifdim\lastskip<\envskipamount
- \removelastskip
- % it's not a good place to break if the last penalty was \nobreak
- % or better ...
- \ifnum\lastpenalty>10000 \else \penalty-50 \fi
- \vskip\envskipamount
- \fi
- \fi
-}}
-
-\let\afterenvbreak = \aboveenvbreak
-
-% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
-\let\nonarrowing=\relax
-
-% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
-% environment contents.
-\font\circle=lcircle10
-\newdimen\circthick
-\newdimen\cartouter\newdimen\cartinner
-\newskip\normbskip\newskip\normpskip\newskip\normlskip
-\circthick=\fontdimen8\circle
-%
-\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
-\def\ctr{{\hskip 6pt\circle\char'010}}
-\def\cbl{{\circle\char'012\hskip -6pt}}
-\def\cbr{{\hskip 6pt\circle\char'011}}
-\def\carttop{\hbox to \cartouter{\hskip\lskip
- \ctl\leaders\hrule height\circthick\hfil\ctr
- \hskip\rskip}}
-\def\cartbot{\hbox to \cartouter{\hskip\lskip
- \cbl\leaders\hrule height\circthick\hfil\cbr
- \hskip\rskip}}
-%
-\newskip\lskip\newskip\rskip
-
-\def\cartouche{%
-\par % can't be in the midst of a paragraph.
-\begingroup
- \lskip=\leftskip \rskip=\rightskip
- \leftskip=0pt\rightskip=0pt %we want these *outside*.
- \cartinner=\hsize \advance\cartinner by-\lskip
- \advance\cartinner by-\rskip
- \cartouter=\hsize
- \advance\cartouter by 18.4pt % allow for 3pt kerns on either
-% side, and for 6pt waste from
-% each corner char, and rule thickness
- \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing=\comment
- \vbox\bgroup
- \baselineskip=0pt\parskip=0pt\lineskip=0pt
- \carttop
- \hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \hsize=\cartinner
- \kern3pt
- \begingroup
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
-\def\Ecartouche{%
- \endgroup
- \kern3pt
- \egroup
- \kern3pt\vrule
- \hskip\rskip
- \egroup
- \cartbot
- \egroup
-\endgroup
-}}
-
-
-% This macro is called at the beginning of all the @example variants,
-% inside a group.
-\def\nonfillstart{%
- \aboveenvbreak
- \inENV % This group ends at the end of the body
- \hfuzz = 12pt % Don't be fussy
- \sepspaces % Make spaces be word-separators rather than space tokens.
- \let\par = \lisppar % don't ignore blank lines
- \obeylines % each line of input is a line of output
- \parskip = 0pt
- \parindent = 0pt
- \emergencystretch = 0pt % don't try to avoid overfull boxes
- % @cartouche defines \nonarrowing to inhibit narrowing
- % at next level down.
- \ifx\nonarrowing\relax
- \advance \leftskip by \lispnarrowing
- \exdentamount=\lispnarrowing
- \let\exdent=\nofillexdent
- \let\nonarrowing=\relax
- \fi
-}
-
-% Define the \E... control sequence only if we are inside the particular
-% environment, so the error checking in \end will work.
-%
-% To end an @example-like environment, we first end the paragraph (via
-% \afterenvbreak's vertical glue), and then the group. That way we keep
-% the zero \parskip that the environments set -- \parskip glue will be
-% inserted at the beginning of the next paragraph in the document, after
-% the environment.
-%
-\def\nonfillfinish{\afterenvbreak\endgroup}
-
-% @lisp: indented, narrowed, typewriter font.
-\def\lisp{\begingroup
- \nonfillstart
- \let\Elisp = \nonfillfinish
- \tt
- \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
- \gobble % eat return
-}
-
-% @example: Same as @lisp.
-\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
-
-% @smallexample and @smalllisp: use smaller fonts.
-% Originally contributed by Pavel@xerox.
-\def\smalllisp{\begingroup
- \def\Esmalllisp{\nonfillfinish\endgroup}%
- \def\Esmallexample{\nonfillfinish\endgroup}%
- \smallexamplefonts
- \lisp
-}
-\let\smallexample = \smalllisp
-
-
-% @display: same as @lisp except keep current font.
-%
-\def\display{\begingroup
- \nonfillstart
- \let\Edisplay = \nonfillfinish
- \gobble
-}
-%
-% @smalldisplay: @display plus smaller fonts.
-%
-\def\smalldisplay{\begingroup
- \def\Esmalldisplay{\nonfillfinish\endgroup}%
- \smallexamplefonts \rm
- \display
-}
-
-% @format: same as @display except don't narrow margins.
-%
-\def\format{\begingroup
- \let\nonarrowing = t
- \nonfillstart
- \let\Eformat = \nonfillfinish
- \gobble
-}
-%
-% @smallformat: @format plus smaller fonts.
-%
-\def\smallformat{\begingroup
- \def\Esmallformat{\nonfillfinish\endgroup}%
- \smallexamplefonts \rm
- \format
-}
-
-% @flushleft (same as @format).
-%
-\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
-
-% @flushright.
-%
-\def\flushright{\begingroup
- \let\nonarrowing = t
- \nonfillstart
- \let\Eflushright = \nonfillfinish
- \advance\leftskip by 0pt plus 1fill
- \gobble
-}
-
-
-% @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins.
-%
-\def\quotation{%
- \begingroup\inENV %This group ends at the end of the @quotation body
- {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
- \parindent=0pt
- % We have retained a nonzero parskip for the environment, since we're
- % doing normal filling. So to avoid extra space below the environment...
- \def\Equotation{\parskip = 0pt \nonfillfinish}%
- %
- % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
- \ifx\nonarrowing\relax
- \advance\leftskip by \lispnarrowing
- \advance\rightskip by \lispnarrowing
- \exdentamount = \lispnarrowing
- \let\nonarrowing = \relax
- \fi
-}
-
-
-% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
-% If we want to allow any <char> as delimiter,
-% we need the curly braces so that makeinfo sees the @verb command, eg:
-% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
-%
-% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
-%
-% [Knuth] p.344; only we need to do the other characters Texinfo sets
-% active too. Otherwise, they get lost as the first character on a
-% verbatim line.
-\def\dospecials{%
- \do\ \do\\\do\{\do\}\do\$\do\&%
- \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
- \do\<\do\>\do\|\do\@\do+\do\"%
-}
-%
-% [Knuth] p. 380
-\def\uncatcodespecials{%
- \def\do##1{\catcode`##1=12}\dospecials}
-%
-% [Knuth] pp. 380,381,391
-% Disable Spanish ligatures ?` and !` of \tt font
-\begingroup
- \catcode`\`=\active\gdef`{\relax\lq}
-\endgroup
-%
-% Setup for the @verb command.
-%
-% Eight spaces for a tab
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
-\endgroup
-%
-\def\setupverb{%
- \tt % easiest (and conventionally used) font for verbatim
- \def\par{\leavevmode\endgraf}%
- \catcode`\`=\active
- \tabeightspaces
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count
- % must do in this order:
- \obeylines \uncatcodespecials \sepspaces
-}
-
-% Setup for the @verbatim environment
-%
-% Real tab expansion
-\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
-%
-\def\starttabbox{\setbox0=\hbox\bgroup}
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabexpand{%
- \catcode`\^^I=\active
- \def^^I{\leavevmode\egroup
- \dimen0=\wd0 % the width so far, or since the previous tab
- \divide\dimen0 by\tabw
- \multiply\dimen0 by\tabw % compute previous multiple of \tabw
- \advance\dimen0 by\tabw % advance to next multiple of \tabw
- \wd0=\dimen0 \box0 \starttabbox
- }%
- }
-\endgroup
-\def\setupverbatim{%
- % Easiest (and conventionally used) font for verbatim
- \tt
- \def\par{\leavevmode\egroup\box0\endgraf}%
- \catcode`\`=\active
- \tabexpand
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count
- % must do in this order:
- \obeylines \uncatcodespecials \sepspaces
- \everypar{\starttabbox}%
-}
-
-% Do the @verb magic: verbatim text is quoted by unique
-% delimiter characters. Before first delimiter expect a
-% right brace, after last delimiter expect closing brace:
-%
-% \def\doverb'{'<char>#1<char>'}'{#1}
-%
-% [Knuth] p. 382; only eat outer {}
-\begingroup
- \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12
- \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
-\endgroup
-%
-\def\verb{\begingroup\setupverb\doverb}
-%
-%
-% Do the @verbatim magic: define the macro \doverbatim so that
-% the (first) argument ends when '@end verbatim' is reached, ie:
-%
-% \def\doverbatim#1@end verbatim{#1}
-%
-% For Texinfo it's a lot easier than for LaTeX,
-% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
-% we need not redefine '\', '{' and '}'.
-%
-% Inspired by LaTeX's verbatim command set [latex.ltx]
-%% Include LaTeX hack for completeness -- never know
-%% \begingroup
-%% \catcode`|=0 \catcode`[=1
-%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active
-%% \catcode`\\=12|gdef|doverbatim#1@end verbatim[
-%% #1|endgroup|def|Everbatim[]|end[verbatim]]
-%% |endgroup
-%
-\begingroup
- \catcode`\ =\active
- \obeylines %
- % ignore everything up to the first ^^M, that's the newline at the end
- % of the @verbatim input line itself. Otherwise we get an extra blank
- % line in the output.
- \gdef\doverbatim#1^^M#2@end verbatim{#2\end{verbatim}}%
-\endgroup
-%
-\def\verbatim{%
- \def\Everbatim{\nonfillfinish\endgroup}%
- \begingroup
- \nonfillstart
- \advance\leftskip by -\defbodyindent
- \begingroup\setupverbatim\doverbatim
-}
-
-% @verbatiminclude FILE - insert text of file in verbatim environment.
-%
-% Allow normal characters that we make active in the argument (a file name).
-\def\verbatiminclude{%
- \begingroup
- \catcode`\\=\other
- \catcode`~=\other
- \catcode`^=\other
- \catcode`_=\other
- \catcode`|=\other
- \catcode`<=\other
- \catcode`>=\other
- \catcode`+=\other
- \parsearg\doverbatiminclude
-}
-\def\setupverbatiminclude{%
- \begingroup
- \nonfillstart
- \advance\leftskip by -\defbodyindent
- \begingroup\setupverbatim
-}
-%
-\def\doverbatiminclude#1{%
- % Restore active chars for included file.
- \endgroup
- \begingroup
- \let\value=\expandablevalue
- \def\thisfile{#1}%
- \expandafter\expandafter\setupverbatiminclude\input\thisfile
- \endgroup
- \nonfillfinish
- \endgroup
-}
-
-% @copying ... @end copying.
-% Save the text away for @insertcopying later. Many commands won't be
-% allowed in this context, but that's ok.
-%
-% We save the uninterpreted tokens, rather than creating a box.
-% Saving the text in a box would be much easier, but then all the
-% typesetting commands (@smallbook, font changes, etc.) have to be done
-% beforehand -- and a) we want @copying to be done first in the source
-% file; b) letting users define the frontmatter in as flexible order as
-% possible is very desirable.
-%
-\def\copying{\begingroup
- % Define a command to swallow text until we reach `@end copying'.
- % \ is the escape char in this texinfo.tex file, so it is the
- % delimiter for the command; @ will be the escape char when we read
- % it, but that doesn't matter.
- \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}%
- %
- % We must preserve ^^M's in the input file; see \insertcopying below.
- \catcode`\^^M = \active
- \docopying
-}
-
-% What we do to finish off the copying text.
-%
-\def\enddocopying{\endgroup\ignorespaces}
-
-% @insertcopying. Here we must play games with ^^M's. On the one hand,
-% we need them to delimit commands such as `@end quotation', so they
-% must be active. On the other hand, we certainly don't want every
-% end-of-line to be a \par, as would happen with the normal active
-% definition of ^^M. On the third hand, two ^^M's in a row should still
-% generate a \par.
-%
-% Our approach is to make ^^M insert a space and a penalty1 normally;
-% then it can also check if \lastpenalty=1. If it does, then manually
-% do \par.
-%
-% This messes up the normal definitions of @c[omment], so we redefine
-% it. Similarly for @ignore. (These commands are used in the gcc
-% manual for man page generation.)
-%
-% Seems pretty fragile, most line-oriented commands will presumably
-% fail, but for the limited use of getting the copying text (which
-% should be quite simple) inserted, we can hope it's ok.
-%
-{\catcode`\^^M=\active %
-\gdef\insertcopying{\begingroup %
- \parindent = 0pt % looks wrong on title page
- \def^^M{%
- \ifnum \lastpenalty=1 %
- \par %
- \else %
- \space \penalty 1 %
- \fi %
- }%
- %
- % Fix @c[omment] for catcode 13 ^^M's.
- \def\c##1^^M{\ignorespaces}%
- \let\comment = \c %
- %
- % Don't bother jumping through all the hoops that \doignore does, it
- % would be very hard since the catcodes are already set.
- \long\def\ignore##1\end ignore{\ignorespaces}%
- %
- \copyingtext %
-\endgroup}%
-}
-
-\message{defuns,}
-% @defun etc.
-
-\newskip\defbodyindent \defbodyindent=.4in
-\newskip\defargsindent \defargsindent=50pt
-\newskip\deflastargmargin \deflastargmargin=18pt
-
-\newcount\parencount
-
-% We want ()&[] to print specially on the defun line.
-%
-\def\activeparens{%
- \catcode`\(=\active \catcode`\)=\active
- \catcode`\&=\active
- \catcode`\[=\active \catcode`\]=\active
-}
-
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
-
-% Be sure that we always have a definition for `(', etc. For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-\global\let(=\lparen \global\let)=\rparen
-\global\let[=\lbrack \global\let]=\rbrack
-
-\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
-\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
-% This is used to turn on special parens
-% but make & act ordinary (given that it's active).
-\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
-
-% Definitions of (, ) and & used in args for functions.
-% This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
- \global\advance\parencount by 1
-}
-%
-% This is the definition of ( when already inside a level of parens.
-\gdef\opnested{\char`\(\global\advance\parencount by 1 }
-%
-\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
- % also in that case restore the outer-level definition of (.
- \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
- \global\advance \parencount by -1 }
-% If we encounter &foo, then turn on ()-hacking afterwards
-\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
-%
-\gdef\normalparens{\boldbrax\let&=\ampnr}
-} % End of definition inside \activeparens
-%% These parens (in \boldbrax) actually are a little bolder than the
-%% contained text. This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
-\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
-\let\ampnr = \&
-\def\lbrb{{\bf\char`\[}}
-\def\rbrb{{\bf\char`\]}}
-
-% Active &'s sneak into the index arguments, so make sure it's defined.
-{
- \catcode`& = \active
- \global\let& = \ampnr
-}
-
-% \defname, which formats the name of the @def (not the args).
-% #1 is the function name.
-% #2 is the type of definition, such as "Function".
-%
-\def\defname#1#2{%
- % How we'll output the type name. Putting it in brackets helps
- % distinguish it from the body text that may end up on the next line
- % just below it.
- \def\temp{#2}%
- \ifx\temp\empty
- \def\defnametype{}%
- \else
- \def\defnametype{[\rm #2]}%
- \fi
- %
- % Get the values of \leftskip and \rightskip as they were outside the @def...
- \dimen2=\leftskip
- \advance\dimen2 by -\defbodyindent
- %
- % Figure out values for the paragraph shape.
- \setbox0=\hbox{\hskip \deflastargmargin{\defnametype}}%
- \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
- \dimen1=\hsize \advance \dimen1 by -\defargsindent % size for continuations
- \parshape 2 0in \dimen0 \defargsindent \dimen1
- %
- % Output arg 2 ("Function" or some such) but stuck inside a box of
- % width 0 so it does not interfere with linebreaking.
- \noindent
- %
- {% Adjust \hsize to exclude the ambient margins,
- % so that \rightline will obey them.
- \advance \hsize by -\dimen2
- \dimen3 = 0pt % was -1.25pc
- \rlap{\rightline{\defnametype\kern\dimen3}}%
- }%
- %
- % Allow all lines to be underfull without complaint:
- \tolerance=10000 \hbadness=10000
- \advance\leftskip by -\defbodyindent
- \exdentamount=\defbodyindent
- {\df #1}\enskip % output function name
- % \defunargs will be called next to output the arguments, if any.
-}
-
-% Common pieces to start any @def...
-% #1 is the \E... control sequence to end the definition (which we define).
-% #2 is the \...x control sequence (which our caller defines).
-% #3 is the control sequence to process the header, such as \defunheader.
-%
-\def\parsebodycommon#1#2#3{%
- \begingroup\inENV
- % If there are two @def commands in a row, we'll have a \nobreak,
- % which is there to keep the function description together with its
- % header. But if there's nothing but headers, we need to allow a
- % break somewhere. Check for penalty 10002 (inserted by
- % \defargscommonending) instead of 10000, since the sectioning
- % commands insert a \penalty10000, and we don't want to allow a break
- % between a section heading and a defun.
- \ifnum\lastpenalty=10002 \penalty2000 \fi
- %
- % Similarly, after a section heading, do not allow a break.
- % But do insert the glue.
- \ifnum\lastpenalty<10000 \medbreak
- \else \medskip % preceded by discardable penalty, so not a breakpoint
- \fi
- %
- % Define the \E... end token that this defining construct specifies
- % so that it will exit this group.
- \def#1{\endgraf\endgroup\medbreak}%
- %
- \parindent=0in
- \advance\leftskip by \defbodyindent
- \exdentamount=\defbodyindent
-}
-
-% Common part of the \...x definitions.
-%
-\def\defxbodycommon{%
- % As with \parsebodycommon above, allow line break if we have multiple
- % x headers in a row. It's not a great place, though.
- \ifnum\lastpenalty=10002 \penalty2000 \fi
- %
- \begingroup\obeylines
-}
-
-% Process body of @defun, @deffn, @defmac, etc.
-%
-\def\defparsebody#1#2#3{%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2{\defxbodycommon \activeparens \spacesplit#3}%
- \catcode\equalChar=\active
- \begingroup\obeylines\activeparens
- \spacesplit#3%
-}
-
-% #1, #2, #3 are the common arguments (see \parsebodycommon above).
-% #4, delimited by the space, is the class name.
-%
-\def\defmethparsebody#1#2#3#4 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 {\defxbodycommon \activeparens \spacesplit{#3{##1}}}%
- \begingroup\obeylines\activeparens
- % The \empty here prevents misinterpretation of a construct such as
- % @deffn {whatever} {Enharmonic comma}
- % See comments at \deftpparsebody, although in our case we don't have
- % to remove the \empty afterwards, since it is empty.
- \spacesplit{#3{#4}}\empty
-}
-
-% Used for @deftypemethod and @deftypeivar.
-% #1, #2, #3 are the common arguments (see \defparsebody).
-% #4, delimited by a space, is the class name.
-% #5 is the method's return type.
-%
-\def\deftypemethparsebody#1#2#3#4 #5 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 ##2 {\defxbodycommon \activeparens \spacesplit{#3{##1}{##2}}}%
- \begingroup\obeylines\activeparens
- \spacesplit{#3{#4}{#5}}%
-}
-
-% Used for @deftypeop. The change from \deftypemethparsebody is an
-% extra argument at the beginning which is the `category', instead of it
-% being the hardwired string `Method' or `Instance Variable'. We have
-% to account for this both in the \...x definition and in parsing the
-% input at hand. Thus also need a control sequence (passed as #5) for
-% the \E... definition to assign the category name to.
-%
-\def\deftypeopparsebody#1#2#3#4#5 #6 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 ##2 ##3 {\def#4{##1}%
- \defxbodycommon \activeparens \spacesplit{#3{##2}{##3}}}%
- \begingroup\obeylines\activeparens
- \spacesplit{#3{#5}{#6}}%
-}
-
-% For @defop.
-\def\defopparsebody #1#2#3#4#5 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 ##2 {\def#4{##1}%
- \defxbodycommon \activeparens \spacesplit{#3{##2}}}%
- \begingroup\obeylines\activeparens
- \spacesplit{#3{#5}}%
-}
-
-% These parsing functions are similar to the preceding ones
-% except that they do not make parens into active characters.
-% These are used for "variables" since they have no arguments.
-%
-\def\defvarparsebody #1#2#3{%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2{\defxbodycommon \spacesplit#3}%
- \catcode\equalChar=\active
- \begingroup\obeylines
- \spacesplit#3%
-}
-
-% @defopvar.
-\def\defopvarparsebody #1#2#3#4#5 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 ##2 {\def#4{##1}%
- \defxbodycommon \spacesplit{#3{##2}}}%
- \begingroup\obeylines
- \spacesplit{#3{#5}}%
-}
-
-\def\defvrparsebody#1#2#3#4 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
- \begingroup\obeylines
- \spacesplit{#3{#4}}%
-}
-
-% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
-% type is just `struct', because we lose the braces in `{struct
-% termios}' when \spacesplit reads its undelimited argument. Sigh.
-% \let\deftpparsebody=\defvrparsebody
-%
-% So, to get around this, we put \empty in with the type name. That
-% way, TeX won't find exactly `{...}' as an undelimited argument, and
-% won't strip off the braces.
-%
-\def\deftpparsebody #1#2#3#4 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
- \begingroup\obeylines
- \spacesplit{\parsetpheaderline{#3{#4}}}\empty
-}
-
-% Fine, but then we have to eventually remove the \empty *and* the
-% braces (if any). That's what this does.
-%
-\def\removeemptybraces\empty#1\relax{#1}
-
-% After \spacesplit has done its work, this is called -- #1 is the final
-% thing to call, #2 the type name (which starts with \empty), and #3
-% (which might be empty) the arguments.
-%
-\def\parsetpheaderline#1#2#3{%
- #1{\removeemptybraces#2\relax}{#3}%
-}%
-
-% Split up #2 (the rest of the input line) at the first space token.
-% call #1 with two arguments:
-% the first is all of #2 before the space token,
-% the second is all of #2 after that space token.
-% If #2 contains no space token, all of it is passed as the first arg
-% and the second is passed as empty.
-%
-{\obeylines %
- \gdef\spacesplit#1#2^^M{\endgroup\spacesplitx{#1}#2 \relax\spacesplitx}%
- \long\gdef\spacesplitx#1#2 #3#4\spacesplitx{%
- \ifx\relax #3%
- #1{#2}{}%
- \else %
- #1{#2}{#3#4}%
- \fi}%
-}
-
-% Define @defun.
-
-% This is called to end the arguments processing for all the @def... commands.
-%
-\def\defargscommonending{%
- \interlinepenalty = 10000
- \advance\rightskip by 0pt plus 1fil
- \endgraf
- \nobreak\vskip -\parskip
- \penalty 10002 % signal to \parsebodycommon and \defxbodycommon.
-}
-
-% This expands the args and terminates the paragraph they comprise.
-%
-\def\defunargs#1{\functionparens \sl
-% Expand, preventing hyphenation at `-' chars.
-% Note that groups don't affect changes in \hyphenchar.
-% Set the font temporarily and use \font in case \setfont made \tensl a macro.
-{\tensl\hyphenchar\font=0}%
-#1%
-{\tensl\hyphenchar\font=45}%
-\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
- \defargscommonending
-}
-
-\def\deftypefunargs #1{%
-% Expand, preventing hyphenation at `-' chars.
-% Note that groups don't affect changes in \hyphenchar.
-% Use \boldbraxnoamp, not \functionparens, so that & is not special.
-\boldbraxnoamp
-\tclose{#1}% avoid \code because of side effects on active chars
- \defargscommonending
-}
-
-% Do complete processing of one @defun or @defunx line already parsed.
-
-% @deffn Command forward-char nchars
-
-\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
-
-\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
-}
-
-% @defun == @deffn Function
-
-\def\defun{\defparsebody\Edefun\defunx\defunheader}
-
-\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDeffunc}%
-\defunargs {#2}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
-}
-
-% @deftypefun int foobar (int @var{foo}, float @var{bar})
-
-\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
-
-% #1 is the data type. #2 is the name and args.
-\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
-% #1 is the data type, #2 the name, #3 the args.
-\def\deftypefunheaderx #1#2 #3\relax{%
-\doind {fn}{\code{#2}}% Make entry in function index
-\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}%
-\deftypefunargs {#3}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
-}
-
-% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
-
-\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
-
-% \defheaderxcond#1\relax$.$
-% puts #1 in @code, followed by a space, but does nothing if #1 is null.
-\def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi}
-
-% #1 is the classification. #2 is the data type. #3 is the name and args.
-\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
-% #1 is the classification, #2 the data type, #3 the name, #4 the args.
-\def\deftypefnheaderx #1#2#3 #4\relax{%
-\doind {fn}{\code{#3}}% Make entry in function index
-\begingroup
-\normalparens % notably, turn off `&' magic, which prevents
-% at least some C++ text from working
-\defname {\defheaderxcond#2\relax$.$#3}{#1}%
-\deftypefunargs {#4}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
-}
-
-% @defmac == @deffn Macro
-
-\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
-
-\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDefmac}%
-\defunargs {#2}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
-}
-
-% @defspec == @deffn Special Form
-
-\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
-
-\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDefspec}%
-\defunargs {#2}\endgroup %
-\catcode\equalChar=\other % Turn off change made in \defparsebody
-}
-
-% @defop CATEGORY CLASS OPERATION ARG...
-%
-\def\defop #1 {\def\defoptype{#1}%
-\defopparsebody\Edefop\defopx\defopheader\defoptype}
-%
-\def\defopheader#1#2#3{%
- \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% function index entry
- \begingroup
- \defname{#2}{\defoptype\ \putwordon\ #1}%
- \defunargs{#3}%
- \endgroup
-}
-
-% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
-%
-\def\deftypeop #1 {\def\deftypeopcategory{#1}%
- \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
- \deftypeopcategory}
-%
-% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
-\def\deftypeopheader#1#2#3#4{%
- \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
- \begingroup
- \defname{\defheaderxcond#2\relax$.$#3}
- {\deftypeopcategory\ \putwordon\ \code{#1}}%
- \deftypefunargs{#4}%
- \endgroup
-}
-
-% @deftypemethod CLASS TYPE METHOD ARG...
-%
-\def\deftypemethod{%
- \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
-%
-% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
-\def\deftypemethodheader#1#2#3#4{%
- \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
- \begingroup
- \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}%
- \deftypefunargs{#4}%
- \endgroup
-}
-
-% @deftypeivar CLASS TYPE VARNAME
-%
-\def\deftypeivar{%
- \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
-%
-% #1 is the class name, #2 the data type, #3 the variable name.
-\def\deftypeivarheader#1#2#3{%
- \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
- \begingroup
- \defname{\defheaderxcond#2\relax$.$#3}
- {\putwordInstanceVariableof\ \code{#1}}%
- \defvarargs{#3}%
- \endgroup
-}
-
-% @defmethod == @defop Method
-%
-\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
-%
-% #1 is the class name, #2 the method name, #3 the args.
-\def\defmethodheader#1#2#3{%
- \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
- \begingroup
- \defname{#2}{\putwordMethodon\ \code{#1}}%
- \defunargs{#3}%
- \endgroup
-}
-
-% @defcv {Class Option} foo-class foo-flag
-
-\def\defcv #1 {\def\defcvtype{#1}%
-\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
-
-\def\defcvarheader #1#2#3{%
- \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% variable index entry
- \begingroup
- \defname{#2}{\defcvtype\ \putwordof\ #1}%
- \defvarargs{#3}%
- \endgroup
-}
-
-% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
-%
-\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
-%
-\def\defivarheader#1#2#3{%
- \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% entry in var index
- \begingroup
- \defname{#2}{\putwordInstanceVariableof\ #1}%
- \defvarargs{#3}%
- \endgroup
-}
-
-% @defvar
-% First, define the processing that is wanted for arguments of @defvar.
-% This is actually simple: just print them in roman.
-% This must expand the args and terminate the paragraph they make up
-\def\defvarargs #1{\normalparens #1%
- \defargscommonending
-}
-
-% @defvr Counter foo-count
-
-\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
-
-\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
-
-% @defvar == @defvr Variable
-
-\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
-
-\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{\putwordDefvar}%
-\defvarargs {#2}\endgroup %
-}
-
-% @defopt == @defvr {User Option}
-
-\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
-
-\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{\putwordDefopt}%
-\defvarargs {#2}\endgroup %
-}
-
-% @deftypevar int foobar
-
-\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
-
-% #1 is the data type. #2 is the name, perhaps followed by text that
-% is actually part of the data type, which should not be put into the index.
-\def\deftypevarheader #1#2{%
-\dovarind#2 \relax% Make entry in variables index
-\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}%
- \defargscommonending
-\endgroup}
-\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
-
-% @deftypevr {Global Flag} int enable
-
-\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
-
-\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
-\begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1}
- \defargscommonending
-\endgroup}
-
-% Now define @deftp
-% Args are printed in bold, a slight difference from @defvar.
-
-\def\deftpargs #1{\bf \defvarargs{#1}}
-
-% @deftp Class window height width ...
-
-\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
-
-\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
-\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
-
-% These definitions are used if you use @defunx (etc.)
-% anywhere other than immediately after a @defun or @defunx.
-%
-\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
-\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
-\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
-\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
-\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
-\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
-\def\defopx#1 {\errmessage{@defopx in invalid context}}
-\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
-\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
-\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
-\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
-\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
-\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
-\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
-\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
-\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
-\def\defunx#1 {\errmessage{@defunx in invalid context}}
-\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
-\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
-
-
-\message{macros,}
-% @macro.
-
-% To do this right we need a feature of e-TeX, \scantokens,
-% which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\undefined
- \newwrite\macscribble
- \def\scanmacro#1{%
- \begingroup \newlinechar`\^^M
- % Undo catcode changes of \startcontents and \doprintindex
- \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
- % Append \endinput to make sure that TeX does not see the ending newline.
- \toks0={#1\endinput}%
- \immediate\openout\macscribble=\jobname.tmp
- \immediate\write\macscribble{\the\toks0}%
- \immediate\closeout\macscribble
- \let\xeatspaces\eatspaces
- \input \jobname.tmp
- \endgroup
-}
-\else
-\def\scanmacro#1{%
-\begingroup \newlinechar`\^^M
-% Undo catcode changes of \startcontents and \doprintindex
-\catcode`\@=0 \catcode`\\=\other \escapechar=`\@
-\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
-\fi
-
-\newcount\paramno % Count of parameters
-\newtoks\macname % Macro name
-\newif\ifrecursive % Is it recursive?
-\def\macrolist{} % List of all defined macros in the form
- % \do\macro1\do\macro2...
-
-% Utility routines.
-% Thisdoes \let #1 = #2, except with \csnames.
-\def\cslet#1#2{%
-\expandafter\expandafter
-\expandafter\let
-\expandafter\expandafter
-\csname#1\endcsname
-\csname#2\endcsname}
-
-% Trim leading and trailing spaces off a string.
-% Concepts from aro-bend problem 15 (see CTAN).
-{\catcode`\@=11
-\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
-\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
-\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
-\def\unbrace#1{#1}
-\unbrace{\gdef\trim@@@ #1 } #2@{#1}
-}
-
-% Trim a single trailing ^^M off a string.
-{\catcode`\^^M=\other \catcode`\Q=3%
-\gdef\eatcr #1{\eatcra #1Q^^MQ}%
-\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
-\gdef\eatcrb#1Q#2Q{#1}%
-}
-
-% Macro bodies are absorbed as an argument in a context where
-% all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \.
-
-% It's necessary to have hard CRs when the macro is executed. This is
-% done by making ^^M (\endlinechar) catcode 12 when reading the macro
-% body, and then making it the \newlinechar in \scanmacro.
-
-\def\macrobodyctxt{%
- \catcode`\~=\other
- \catcode`\^=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\+=\other
- \catcode`\{=\other
- \catcode`\}=\other
- \catcode`\@=\other
- \catcode`\^^M=\other
- \usembodybackslash}
-
-\def\macroargctxt{%
- \catcode`\~=\other
- \catcode`\^=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\+=\other
- \catcode`\@=\other
- \catcode`\\=\other}
-
-% \mbodybackslash is the definition of \ in @macro bodies.
-% It maps \foo\ => \csname macarg.foo\endcsname => #N
-% where N is the macro parameter number.
-% We define \csname macarg.\endcsname to be \realbackslash, so
-% \\ in macro replacement text gets you a backslash.
-
-{\catcode`@=0 @catcode`@\=@active
- @gdef@usembodybackslash{@let\=@mbodybackslash}
- @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
-}
-\expandafter\def\csname macarg.\endcsname{\realbackslash}
-
-\def\macro{\recursivefalse\parsearg\macroxxx}
-\def\rmacro{\recursivetrue\parsearg\macroxxx}
-
-\def\macroxxx#1{%
- \getargs{#1}% now \macname is the macname and \argl the arglist
- \ifx\argl\empty % no arguments
- \paramno=0%
- \else
- \expandafter\parsemargdef \argl;%
- \fi
- \if1\csname ismacro.\the\macname\endcsname
- \message{Warning: redefining \the\macname}%
- \else
- \expandafter\ifx\csname \the\macname\endcsname \relax
- \else \errmessage{Macro name \the\macname\space already defined}\fi
- \global\cslet{macsave.\the\macname}{\the\macname}%
- \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
- % Add the macroname to \macrolist
- \toks0 = \expandafter{\macrolist\do}%
- \xdef\macrolist{\the\toks0
- \expandafter\noexpand\csname\the\macname\endcsname}%
- \fi
- \begingroup \macrobodyctxt
- \ifrecursive \expandafter\parsermacbody
- \else \expandafter\parsemacbody
- \fi}
-
-\def\unmacro{\parsearg\dounmacro}
-\def\dounmacro#1{%
- \if1\csname ismacro.#1\endcsname
- \global\cslet{#1}{macsave.#1}%
- \global\expandafter\let \csname ismacro.#1\endcsname=0%
- % Remove the macro name from \macrolist:
- \begingroup
- \expandafter\let\csname#1\endcsname \relax
- \let\do\unmacrodo
- \xdef\macrolist{\macrolist}%
- \endgroup
- \else
- \errmessage{Macro #1 not defined}%
- \fi
-}
-
-% Called by \do from \dounmacro on each macro. The idea is to omit any
-% macro definitions that have been changed to \relax.
-%
-\def\unmacrodo#1{%
- \ifx#1\relax
- % remove this
- \else
- \noexpand\do \noexpand #1%
- \fi
-}
-
-% This makes use of the obscure feature that if the last token of a
-% <parameter list> is #, then the preceding argument is delimited by
-% an opening brace, and that opening brace is not consumed.
-\def\getargs#1{\getargsxxx#1{}}
-\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname #1 #2\relax{\macname={#1}}
-\def\getmacargs#1{\def\argl{#1}}
-
-% Parse the optional {params} list. Set up \paramno and \paramlist
-% so \defmacro knows what to do. Define \macarg.blah for each blah
-% in the params list, to be ##N where N is the position in that list.
-% That gets used by \mbodybackslash (above).
-
-% We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX: let \hash be something
-% unexpandable, insert that wherever you need a #, and then redefine
-% it to # just before using the token list produced.
-%
-% The same technique is used to protect \eatspaces till just before
-% the macro is used.
-
-\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
- \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
-\def\parsemargdefxxx#1,{%
- \if#1;\let\next=\relax
- \else \let\next=\parsemargdefxxx
- \advance\paramno by 1%
- \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
- {\xeatspaces{\hash\the\paramno}}%
- \edef\paramlist{\paramlist\hash\the\paramno,}%
- \fi\next}
-
-% These two commands read recursive and nonrecursive macro bodies.
-% (They're different since rec and nonrec macros end differently.)
-
-\long\def\parsemacbody#1@end macro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-\long\def\parsermacbody#1@end rmacro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-
-% This defines the macro itself. There are six cases: recursive and
-% nonrecursive macros of zero, one, and many arguments.
-% Much magic with \expandafter here.
-% \xdef is used so that macro definitions will survive the file
-% they're defined in; @include reads the file inside a group.
-\def\defmacro{%
- \let\hash=##% convert placeholders to macro parameter chars
- \ifrecursive
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\scanmacro{\temp}}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup\noexpand\scanmacro{\temp}}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{\egroup\noexpand\scanmacro{\temp}}%
- \fi
- \else
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \expandafter\noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \fi
- \fi}
-
-\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
-
-% \braceorline decides whether the next nonwhitespace character is a
-% {. If so it reads up to the closing }, if not, it reads the whole
-% line. Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
-\def\braceorlinexxx{%
- \ifx\nchar\bgroup\else
- \expandafter\parsearg
- \fi \next}
-
-% We mant to disable all macros during \shipout so that they are not
-% expanded by \write.
-\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
- \edef\next{\macrolist}\expandafter\endgroup\next}
-
-
-% @alias.
-% We need some trickery to remove the optional spaces around the equal
-% sign. Just make them active and then expand them all to nothing.
-\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
-\def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{\ignoreactivespaces
-\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
- \expandafter\noexpand\csname#2\endcsname}%
-\expandafter\endgroup\next}
-
-
-\message{cross references,}
-
-\newwrite\auxfile
-
-\newif\ifhavexrefs % True if xref values are known.
-\newif\ifwarnedxrefs % True if we warned once that they aren't known.
-
-% @inforef is relatively simple.
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
- node \samp{\ignorespaces#1{}}}
-
-% @node's only job in TeX is to define \lastnode, which is used in
-% cross-references.
-\def\node{\ENVcheck\parsearg\nodezzz}
-\def\nodezzz#1{\nodexxx #1,\finishnodeparse}
-\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}}
-\let\nwnode=\node
-\let\lastnode=\empty
-
-% Write a cross-reference definition for the current node. #1 is the
-% type (Ynumbered, Yappendix, Ynothing).
-%
-\def\donoderef#1{%
- \ifx\lastnode\empty\else
- \setref{\lastnode}{#1}%
- \global\let\lastnode=\empty
- \fi
-}
-
-% @anchor{NAME} -- define xref target at arbitrary point.
-%
-\newcount\savesfregister
-%
-\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
-
-% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
-% anchor), namely NAME-title (the corresponding @chapter/etc. name),
-% NAME-pg (the page number), and NAME-snt (section number and type).
-% Called from \foonoderef.
-%
-% We take care not to expand the title.
-%
-% Use \turnoffactive so that punctuation chars such as underscore
-% and backslash work in node names.
-%
-\def\setref#1#2{%
- \pdfmkdest{#1}%
- \iflinks
- {%
- \turnoffactive
- \edef\writexrdef##1##2{%
- \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
- ##1}{##2}}% these are parameters of \writexrdef
- }
- \toks0 = \expandafter{\thissection}
- \immediate \writexrdef{title}{\the\toks0 }%
- \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
- \writexrdef{pg}{\folio}% will be written later, during \shipout
- }%
- \fi
-}
-
-% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
-% the node name, #2 the name of the Info cross-reference, #3 the printed
-% node name, #4 the name of the Info file, #5 the name of the printed
-% manual. All but the node name can be omitted.
-%
-\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
-\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
-\def\ref#1{\xrefX[#1,,,,,,,]}
-\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
- \unsepspaces
- \def\printedmanual{\ignorespaces #5}%
- \def\printednodename{\ignorespaces #3}%
- \setbox1=\hbox{\printedmanual}%
- \setbox0=\hbox{\printednodename}%
- \ifdim \wd0 = 0pt
- % No printed node name was explicitly given.
- \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
- % Use the node name inside the square brackets.
- \def\printednodename{\ignorespaces #1}%
- \else
- % Use the actual chapter/section title appear inside
- % the square brackets. Use the real section title if we have it.
- \ifdim \wd1 > 0pt
- % It is in another manual, so we don't have it.
- \def\printednodename{\ignorespaces #1}%
- \else
- \ifhavexrefs
- % We know the real title if we have the xref values.
- \def\printednodename{\refx{#1-title}{}}%
- \else
- % Otherwise just copy the Info node name.
- \def\printednodename{\ignorespaces #1}%
- \fi%
- \fi
- \fi
- \fi
- %
- % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
- % insert empty discretionaries after hyphens, which means that it will
- % not find a line break at a hyphen in a node names. Since some manuals
- % are best written with fairly long node names, containing hyphens, this
- % is a loss. Therefore, we give the text of the node name again, so it
- % is as if TeX is seeing it for the first time.
- \ifpdf
- \leavevmode
- \getfilename{#4}%
- {\turnoffactive \otherbackslash
- \ifnum\filenamelength>0
- \startlink attr{/Border [0 0 0]}%
- goto file{\the\filename.pdf} name{#1}%
- \else
- \startlink attr{/Border [0 0 0]}%
- goto name{\pdfmkpgn{#1}}%
- \fi
- }%
- \linkcolor
- \fi
- %
- \ifdim \wd1 > 0pt
- \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
- \else
- % _ (for example) has to be the character _ for the purposes of the
- % control sequence corresponding to the node, but it has to expand
- % into the usual \leavevmode...\vrule stuff for purposes of
- % printing. So we \turnoffactive for the \refx-snt, back on for the
- % printing, back off for the \refx-pg.
- {\turnoffactive \otherbackslash
- % Only output a following space if the -snt ref is nonempty; for
- % @unnumbered and @anchor, it won't be.
- \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
- \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
- }%
- % output the `[mynode]' via a macro.
- \xrefprintnodename\printednodename
- %
- % But we always want a comma and a space:
- ,\space
- %
- % output the `page 3'.
- \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
- \fi
- \endlink
-\endgroup}
-
-% This macro is called from \xrefX for the `[nodename]' part of xref
-% output. It's a separate macro only so it can be changed more easily,
-% since not square brackets don't work in some documents. Particularly
-% one that Bob is working on :).
-%
-\def\xrefprintnodename#1{[#1]}
-
-% Things referred to by \setref.
-%
-\def\Ynothing{}
-\def\Yomitfromtoc{}
-\def\Ynumbered{%
- \ifnum\secno=0
- \putwordChapter@tie \the\chapno
- \else \ifnum\subsecno=0
- \putwordSection@tie \the\chapno.\the\secno
- \else \ifnum\subsubsecno=0
- \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
- \else
- \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
- \fi\fi\fi
-}
-\def\Yappendix{%
- \ifnum\secno=0
- \putwordAppendix@tie @char\the\appendixno{}%
- \else \ifnum\subsecno=0
- \putwordSection@tie @char\the\appendixno.\the\secno
- \else \ifnum\subsubsecno=0
- \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
- \else
- \putwordSection@tie
- @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
- \fi\fi\fi
-}
-
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
- \let\linenumber = \empty % Pre-3.0.
-\else
- \def\linenumber{\the\inputlineno:\space}
-\fi
-
-% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
-% If its value is nonempty, SUFFIX is output afterward.
-%
-\def\refx#1#2{%
- {%
- \indexnofonts
- \otherbackslash
- \expandafter\global\expandafter\let\expandafter\thisrefX
- \csname X#1\endcsname
- }%
- \ifx\thisrefX\relax
- % If not defined, say something at least.
- \angleleft un\-de\-fined\angleright
- \iflinks
- \ifhavexrefs
- \message{\linenumber Undefined cross reference `#1'.}%
- \else
- \ifwarnedxrefs\else
- \global\warnedxrefstrue
- \message{Cross reference values unknown; you must run TeX again.}%
- \fi
- \fi
- \fi
- \else
- % It's defined, so just use it.
- \thisrefX
- \fi
- #2% Output the suffix in any case.
-}
-
-% This is the macro invoked by entries in the aux file.
-%
-\def\xrdef#1{\expandafter\gdef\csname X#1\endcsname}
-
-% Read the last existing aux file, if any. No error if none exists.
-\def\readauxfile{\begingroup
- \catcode`\^^@=\other
- \catcode`\^^A=\other
- \catcode`\^^B=\other
- \catcode`\^^C=\other
- \catcode`\^^D=\other
- \catcode`\^^E=\other
- \catcode`\^^F=\other
- \catcode`\^^G=\other
- \catcode`\^^H=\other
- \catcode`\^^K=\other
- \catcode`\^^L=\other
- \catcode`\^^N=\other
- \catcode`\^^P=\other
- \catcode`\^^Q=\other
- \catcode`\^^R=\other
- \catcode`\^^S=\other
- \catcode`\^^T=\other
- \catcode`\^^U=\other
- \catcode`\^^V=\other
- \catcode`\^^W=\other
- \catcode`\^^X=\other
- \catcode`\^^Z=\other
- \catcode`\^^[=\other
- \catcode`\^^\=\other
- \catcode`\^^]=\other
- \catcode`\^^^=\other
- \catcode`\^^_=\other
- % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
- % in xref tags, i.e., node names. But since ^^e4 notation isn't
- % supported in the main text, it doesn't seem desirable. Furthermore,
- % that is not enough: for node names that actually contain a ^
- % character, we would end up writing a line like this: 'xrdef {'hat
- % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
- % argument, and \hat is not an expandable control sequence. It could
- % all be worked out, but why? Either we support ^^ or we don't.
- %
- % The other change necessary for this was to define \auxhat:
- % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
- % and then to call \auxhat in \setq.
- %
- \catcode`\^=\other
- %
- % Special characters. Should be turned off anyway, but...
- \catcode`\~=\other
- \catcode`\[=\other
- \catcode`\]=\other
- \catcode`\"=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\$=\other
- \catcode`\#=\other
- \catcode`\&=\other
- \catcode`\%=\other
- \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
- %
- % Make the characters 128-255 be printing characters
- {%
- \count 1=128
- \def\loop{%
- \catcode\count 1=\other
- \advance\count 1 by 1
- \ifnum \count 1<256 \loop \fi
- }%
- }%
- %
- % Turn off \ as an escape so we do not lose on
- % entries which were dumped with control sequences in their names.
- % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^
- % Reference to such entries still does not work the way one would wish,
- % but at least they do not bomb out when the aux file is read in.
- \catcode`\\=\other
- %
- % @ is our escape character in .aux files.
- \catcode`\{=1
- \catcode`\}=2
- \catcode`\@=0
- %
- \openin 1 \jobname.aux
- \ifeof 1 \else
- \closein 1
- \input \jobname.aux
- \global\havexrefstrue
- \fi
- % Open the new aux file. TeX will close it automatically at exit.
- \openout\auxfile=\jobname.aux
-\endgroup}
-
-
-% Footnotes.
-
-\newcount \footnoteno
-
-% The trailing space in the following definition for supereject is
-% vital for proper filling; pages come out unaligned when you do a
-% pagealignmacro call if that space before the closing brace is
-% removed. (Generally, numeric constants should always be followed by a
-% space to prevent strange expansion errors.)
-\def\supereject{\par\penalty -20000\footnoteno =0 }
-
-% @footnotestyle is meaningful for info output only.
-\let\footnotestyle=\comment
-
-\let\ptexfootnote=\footnote
-
-{\catcode `\@=11
-%
-% Auto-number footnotes. Otherwise like plain.
-\gdef\footnote{%
- \let\indent=\ptexindent
- \let\noindent=\ptexnoindent
- \global\advance\footnoteno by \@ne
- \edef\thisfootno{$^{\the\footnoteno}$}%
- %
- % In case the footnote comes at the end of a sentence, preserve the
- % extra spacing after we do the footnote number.
- \let\@sf\empty
- \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
- %
- % Remove inadvertent blank space before typesetting the footnote number.
- \unskip
- \thisfootno\@sf
- \dofootnote
-}%
-
-% Don't bother with the trickery in plain.tex to not require the
-% footnote text as a parameter. Our footnotes don't need to be so general.
-%
-% Oh yes, they do; otherwise, @ifset and anything else that uses
-% \parseargline fail inside footnotes because the tokens are fixed when
-% the footnote is read. --karl, 16nov96.
-%
-% The start of the footnote looks usually like this:
-\gdef\startfootins{\insert\footins\bgroup}
-%
-% ... but this macro is redefined inside @multitable.
-%
-\gdef\dofootnote{%
- \startfootins
- % We want to typeset this text as a normal paragraph, even if the
- % footnote reference occurs in (for example) a display environment.
- % So reset some parameters.
- \hsize=\pagewidth
- \interlinepenalty\interfootnotelinepenalty
- \splittopskip\ht\strutbox % top baseline for broken footnotes
- \splitmaxdepth\dp\strutbox
- \floatingpenalty\@MM
- \leftskip\z@skip
- \rightskip\z@skip
- \spaceskip\z@skip
- \xspaceskip\z@skip
- \parindent\defaultparindent
- %
- \smallfonts \rm
- %
- % Because we use hanging indentation in footnotes, a @noindent appears
- % to exdent this text, so make it be a no-op. makeinfo does not use
- % hanging indentation so @noindent can still be needed within footnote
- % text after an @example or the like (not that this is good style).
- \let\noindent = \relax
- %
- % Hang the footnote text off the number. Use \everypar in case the
- % footnote extends for more than one paragraph.
- \everypar = {\hang}%
- \textindent{\thisfootno}%
- %
- % Don't crash into the line above the footnote text. Since this
- % expands into a box, it must come within the paragraph, lest it
- % provide a place where TeX can split the footnote.
- \footstrut
- \futurelet\next\fo@t
-}
-}%end \catcode `\@=11
-
-% @| inserts a changebar to the left of the current line. It should
-% surround any changed text. This approach does *not* work if the
-% change spans more than two lines of output. To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
-%
-\def\|{%
- % \vadjust can only be used in horizontal mode.
- \leavevmode
- %
- % Append this vertical mode material after the current line in the output.
- \vadjust{%
- % We want to insert a rule with the height and depth of the current
- % leading; that is exactly what \strutbox is supposed to record.
- \vskip-\baselineskip
- %
- % \vadjust-items are inserted at the left edge of the type. So
- % the \llap here moves out into the left-hand margin.
- \llap{%
- %
- % For a thicker or thinner bar, change the `1pt'.
- \vrule height\baselineskip width1pt
- %
- % This is the space between the bar and the text.
- \hskip 12pt
- }%
- }%
-}
-
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt}
-
-% @image. We use the macros from epsf.tex to support this.
-% If epsf.tex is not installed and @image is used, we complain.
-%
-% Check for and read epsf.tex up front. If we read it only at @image
-% time, we might be inside a group, and then its definitions would get
-% undone and the next image would fail.
-\openin 1 = epsf.tex
-\ifeof 1 \else
- \closein 1
- % Do not bother showing banner with epsf.tex v2.7k (available in
- % doc/epsf.tex and on ctan).
- \def\epsfannounce{\toks0 = }%
- \input epsf.tex
-\fi
-%
-% We will only complain once about lack of epsf.tex.
-\newif\ifwarnednoepsf
-\newhelp\noepsfhelp{epsf.tex must be installed for images to
- work. It is also included in the Texinfo distribution, or you can get
- it from ftp://tug.org/tex/epsf.tex.}
-%
-\def\image#1{%
- \ifx\epsfbox\undefined
- \ifwarnednoepsf \else
- \errhelp = \noepsfhelp
- \errmessage{epsf.tex not found, images will be ignored}%
- \global\warnednoepsftrue
- \fi
- \else
- \imagexxx #1,,,,,\finish
- \fi
-}
-%
-% Arguments to @image:
-% #1 is (mandatory) image filename; we tack on .eps extension.
-% #2 is (optional) width, #3 is (optional) height.
-% #4 is (ignored optional) html alt text.
-% #5 is (ignored optional) extension.
-% #6 is just the usual extra ignored arg for parsing this stuff.
-\newif\ifimagevmode
-\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
- \catcode`\^^M = 5 % in case we're inside an example
- \normalturnoffactive % allow _ et al. in names
- % If the image is by itself, center it.
- \ifvmode
- \imagevmodetrue
- \nobreak\bigskip
- % Usually we'll have text after the image which will insert
- % \parskip glue, so insert it here too to equalize the space
- % above and below.
- \nobreak\vskip\parskip
- \nobreak
- \line\bgroup\hss
- \fi
- %
- % Output the image.
- \ifpdf
- \dopdfimage{#1}{#2}{#3}%
- \else
- % \epsfbox itself resets \epsf?size at each figure.
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
- \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
- \epsfbox{#1.eps}%
- \fi
- %
- \ifimagevmode \hss \egroup \bigbreak \fi % space after the image
-\endgroup}
-
-
-\message{localization,}
-% and i18n.
-
-% @documentlanguage is usually given very early, just after
-% @setfilename. If done too late, it may not override everything
-% properly. Single argument is the language abbreviation.
-% It would be nice if we could set up a hyphenation file here.
-%
-\def\documentlanguage{\parsearg\dodocumentlanguage}
-\def\dodocumentlanguage#1{%
- \tex % read txi-??.tex file in plain TeX.
- % Read the file if it exists.
- \openin 1 txi-#1.tex
- \ifeof1
- \errhelp = \nolanghelp
- \errmessage{Cannot read language file txi-#1.tex}%
- \let\temp = \relax
- \else
- \def\temp{\input txi-#1.tex }%
- \fi
- \temp
- \endgroup
-}
-\newhelp\nolanghelp{The given language definition file cannot be found or
-is empty. Maybe you need to install it? In the current directory
-should work if nowhere else does.}
-
-
-% @documentencoding should change something in TeX eventually, most
-% likely, but for now just recognize it.
-\let\documentencoding = \comment
-
-
-% Page size parameters.
-%
-\newdimen\defaultparindent \defaultparindent = 15pt
-
-\chapheadingskip = 15pt plus 4pt minus 2pt
-\secheadingskip = 12pt plus 3pt minus 2pt
-\subsecheadingskip = 9pt plus 2pt minus 2pt
-
-% Prevent underfull vbox error messages.
-\vbadness = 10000
-
-% Don't be so finicky about underfull hboxes, either.
-\hbadness = 2000
-
-% Following George Bush, just get rid of widows and orphans.
-\widowpenalty=10000
-\clubpenalty=10000
-
-% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
-% using an old version of TeX, don't do anything. We want the amount of
-% stretch added to depend on the line length, hence the dependence on
-% \hsize. We call this whenever the paper size is set.
-%
-\def\setemergencystretch{%
- \ifx\emergencystretch\thisisundefined
- % Allow us to assign to \emergencystretch anyway.
- \def\emergencystretch{\dimen0}%
- \else
- \emergencystretch = .15\hsize
- \fi
-}
-
-% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
-% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8)
-% physical page width.
-%
-% We also call \setleading{\textleading}, so the caller should define
-% \textleading. The caller should also set \parskip.
-%
-\def\internalpagesizes#1#2#3#4#5#6#7#8{%
- \voffset = #3\relax
- \topskip = #6\relax
- \splittopskip = \topskip
- %
- \vsize = #1\relax
- \advance\vsize by \topskip
- \outervsize = \vsize
- \advance\outervsize by 2\topandbottommargin
- \pageheight = \vsize
- %
- \hsize = #2\relax
- \outerhsize = \hsize
- \advance\outerhsize by 0.5in
- \pagewidth = \hsize
- %
- \normaloffset = #4\relax
- \bindingoffset = #5\relax
- %
- \ifpdf
- \pdfpageheight #7\relax
- \pdfpagewidth #8\relax
- \fi
- %
- \setleading{\textleading}
- %
- \parindent = \defaultparindent
- \setemergencystretch
-}
-
-% @letterpaper (the default).
-\def\letterpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % If page is nothing but text, make it come out even.
- \internalpagesizes{46\baselineskip}{6in}%
- {\voffset}{.25in}%
- {\bindingoffset}{36pt}%
- {11in}{8.5in}%
-}}
-
-% Use @smallbook to reset parameters for 7x9.5 (or so) format.
-\def\smallbook{{\globaldefs = 1
- \parskip = 2pt plus 1pt
- \textleading = 12pt
- %
- \internalpagesizes{7.5in}{5in}%
- {\voffset}{.25in}%
- {\bindingoffset}{16pt}%
- {9.25in}{7in}%
- %
- \lispnarrowing = 0.3in
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = .5cm
-}}
-
-% Use @afourpaper to print on European A4 paper.
-\def\afourpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % Double-side printing via postscript on Laserjet 4050
- % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
- % To change the settings for a different printer or situation, adjust
- % \normaloffset until the front-side and back-side texts align. Then
- % do the same for \bindingoffset. You can set these for testing in
- % your texinfo source file like this:
- % @tex
- % \global\normaloffset = -6mm
- % \global\bindingoffset = 10mm
- % @end tex
- \internalpagesizes{51\baselineskip}{160mm}
- {\voffset}{\hoffset}%
- {\bindingoffset}{44pt}%
- {297mm}{210mm}%
- %
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = 5mm
-}}
-
-% Use @afivepaper to print on European A5 paper.
-% From romildo@urano.iceb.ufop.br, 2 July 2000.
-% He also recommends making @example and @lisp be small.
-\def\afivepaper{{\globaldefs = 1
- \parskip = 2pt plus 1pt minus 0.1pt
- \textleading = 12.5pt
- %
- \internalpagesizes{160mm}{120mm}%
- {\voffset}{\hoffset}%
- {\bindingoffset}{8pt}%
- {210mm}{148mm}%
- %
- \lispnarrowing = 0.2in
- \tolerance = 800
- \hfuzz = 1.2pt
- \contentsrightmargin = 0pt
- \defbodyindent = 2mm
- \tableindent = 12mm
-}}
-
-% A specific text layout, 24x15cm overall, intended for A4 paper.
-\def\afourlatex{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{237mm}{150mm}%
- {\voffset}{4.6mm}%
- {\bindingoffset}{7mm}%
- {297mm}{210mm}%
- %
- % Must explicitly reset to 0 because we call \afourpaper.
- \globaldefs = 0
-}}
-
-% Use @afourwide to print on A4 paper in landscape format.
-\def\afourwide{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{241mm}{165mm}%
- {\voffset}{-2.95mm}%
- {\bindingoffset}{7mm}%
- {297mm}{210mm}%
- \globaldefs = 0
-}}
-
-% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
-% Perhaps we should allow setting the margins, \topskip, \parskip,
-% and/or leading, also. Or perhaps we should compute them somehow.
-%
-\def\pagesizes{\parsearg\pagesizesxxx}
-\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
-\def\pagesizesyyy#1,#2,#3\finish{{%
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
- \globaldefs = 1
- %
- \parskip = 3pt plus 2pt minus 1pt
- \setleading{\textleading}%
- %
- \dimen0 = #1
- \advance\dimen0 by \voffset
- %
- \dimen2 = \hsize
- \advance\dimen2 by \normaloffset
- %
- \internalpagesizes{#1}{\hsize}%
- {\voffset}{\normaloffset}%
- {\bindingoffset}{44pt}%
- {\dimen0}{\dimen2}%
-}}
-
-% Set default to letter.
-%
-\letterpaper
-
-
-\message{and turning on texinfo input format.}
-
-% Define macros to output various characters with catcode for normal text.
-\catcode`\"=\other
-\catcode`\~=\other
-\catcode`\^=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode`\+=\other
-\catcode`\$=\other
-\def\normaldoublequote{"}
-\def\normaltilde{~}
-\def\normalcaret{^}
-\def\normalunderscore{_}
-\def\normalverticalbar{|}
-\def\normalless{<}
-\def\normalgreater{>}
-\def\normalplus{+}
-\def\normaldollar{$}%$ font-lock fix
-
-% This macro is used to make a character print one way in ttfont
-% where it can probably just be output, and another way in other fonts,
-% where something hairier probably needs to be done.
-%
-% #1 is what to print if we are indeed using \tt; #2 is what to print
-% otherwise. Since all the Computer Modern typewriter fonts have zero
-% interword stretch (and shrink), and it is reasonable to expect all
-% typewriter fonts to have this, we can check that font parameter.
-%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
-
-% Same as above, but check for italic font. Actually this also catches
-% non-italic slanted fonts since it is impossible to distinguish them from
-% italic fonts. But since this is only used by $ and it uses \sl anyway
-% this is not a problem.
-\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
-
-% Turn off all special characters except @
-% (and those which the user can use as if they were ordinary).
-% Most of these we simply print from the \tt font, but for some, we can
-% use math or other variants that look better in normal text.
-
-\catcode`\"=\active
-\def\activedoublequote{{\tt\char34}}
-\let"=\activedoublequote
-\catcode`\~=\active
-\def~{{\tt\char126}}
-\chardef\hat=`\^
-\catcode`\^=\active
-\def^{{\tt \hat}}
-
-\catcode`\_=\active
-\def_{\ifusingtt\normalunderscore\_}
-% Subroutine for the previous macro.
-\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
-
-\catcode`\|=\active
-\def|{{\tt\char124}}
-\chardef \less=`\<
-\catcode`\<=\active
-\def<{{\tt \less}}
-\chardef \gtr=`\>
-\catcode`\>=\active
-\def>{{\tt \gtr}}
-\catcode`\+=\active
-\def+{{\tt \char 43}}
-\catcode`\$=\active
-\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
-
-% Set up an active definition for =, but don't enable it most of the time.
-{\catcode`\==\active
-\global\def={{\tt \char 61}}}
-
-\catcode`+=\active
-\catcode`\_=\active
-
-% If a .fmt file is being used, characters that might appear in a file
-% name cannot be active until we have parsed the command line.
-% So turn them off again, and have \everyjob (or @setfilename) turn them on.
-% \otherifyactive is called near the end of this file.
-\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
-
-\catcode`\@=0
-
-% \rawbackslashxx outputs one backslash character in current font,
-% as in \char`\\.
-\global\chardef\rawbackslashxx=`\\
-
-% \rawbackslash defines an active \ to do \rawbackslashxx.
-% \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other.
-{\catcode`\\=\active
- @gdef@rawbackslash{@let\=@rawbackslashxx}
- @gdef@otherbackslash{@let\=@realbackslash}
-}
-
-% \realbackslash is an actual character `\' with catcode other.
-{\catcode`\\=\other @gdef@realbackslash{\}}
-
-% \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\rawbackslashxx}}
-
-\catcode`\\=\active
-
-% Used sometimes to turn off (effectively) the active characters
-% even after parsing them.
-@def@turnoffactive{%
- @let"=@normaldoublequote
- @let\=@realbackslash
- @let~=@normaltilde
- @let^=@normalcaret
- @let_=@normalunderscore
- @let|=@normalverticalbar
- @let<=@normalless
- @let>=@normalgreater
- @let+=@normalplus
- @let$=@normaldollar %$ font-lock fix
-}
-
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'. (Thus, \ is not expandable when this is in
-% effect.)
-%
-@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
-
-% Make _ and + \other characters, temporarily.
-% This is canceled by @fixbackslash.
-@otherifyactive
-
-% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
-% That is what \eatinput is for; after that, the `\' should revert to printing
-% a backslash.
-%
-@gdef@eatinput input texinfo{@fixbackslash}
-@global@let\ = @eatinput
-
-% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\{ in the file would cause an error. This macro tries to fix
-% that, assuming it is called before the first `\' could plausibly occur.
-% Also back turn on active characters that might appear in the input
-% file name, in case not using a pre-dumped format.
-%
-@gdef@fixbackslash{%
- @ifx\@eatinput @let\ = @normalbackslash @fi
- @catcode`+=@active
- @catcode`@_=@active
-}
-
-% Say @foo, not \foo, in error messages.
-@escapechar = `@@
-
-% These look ok in all fonts, so just make them not special.
-@catcode`@& = @other
-@catcode`@# = @other
-@catcode`@% = @other
-
-@c Set initial fonts.
-@textfonts
-@rm
-
-
-@c Local variables:
-@c eval: (add-hook 'write-file-hooks 'time-stamp)
-@c page-delimiter: "^\\\\message"
-@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d.%02H"
-@c time-stamp-end: "}"
-@c End:
-
-@ignore
- arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
-@end ignore
projects / runtime.git / blobdiff