Added SILC Thread Queue API

[crypto.git] / doc / draft-riikonen-silc-spec-01.nroff

diff --git a/doc/draft-riikonen-silc-spec-01.nroff b/doc/draft-riikonen-silc-spec-01.nroff
index d641e083f55b5f31f5d99d2dad755cbc184de5f6..326c79cc0c1347052472068f50288d88d74401c1 100644 (file)
--- a/doc/draft-riikonen-silc-spec-01.nroff
+++ b/doc/draft-riikonen-silc-spec-01.nroff
@@ -1791,10 +1791,15 @@ without executing SKE protocol.  In this case, the new key is created by
 hashing the old key with hash function selected earlier in the SKE
 protocol.  If the digest length of the hash function is too short for the
 key, then the key is distributed as described in section Processing the
-Key Material in [SILC3].  After both parties has regenerated the session
-key, both send SILC_PACKET_REKEY_DONE packet to each other.  These packets
-are still secured with the old key.  After these packets, the following
-packets must be protected with the new key.
+Key Material in [SILC3].
+
+After both parties has regenerated the session key, both send
+SILC_PACKET_REKEY_DONE packet to each other.  These packets are still
+secured with the old key.  After these packets, the following packets
+must be protected with the new key.  After sending the REKEY_DONE packet
+all subsequent sent packets must be encrypted with the new key.  After
+receiving the REKEY_DONE packet all subsequent packets must be
+decrypted with the new key.
 
 
 .ti 0
@@ -2264,7 +2269,7 @@ List of all defined commands in SILC follows.
    7    SILC_COMMAND_INVITE
 
         Max Arguments:  4
-            Arguments:  (1) [<Client ID>]      (2) <Channel ID>
+            Arguments:  (1) <Channel ID>       (2) [<Client ID>]
                         (3) [<adding client>]  (4) [<removing client>]
 
         This command is used to invite other clients to join to the
@@ -2303,10 +2308,12 @@ List of all defined commands in SILC follows.
 
         Reply messages to the command:
 
-        Max Arguments:  2
-            Arguments:  (1) <Status Payload>
+        Max Arguments:  3
+            Arguments:  (1) <Status Payload>  (2) <Channel ID>
+                        (3) [<invite list>]
 
-        This command replies only with Status Payload.
+       This command replies with the invite list of the channel if it
+       exists.
 
         Status messages:
 
@@ -2378,13 +2385,16 @@ List of all defined commands in SILC follows.
 
    10   SILC_COMMAND_INFO
 
-        Max Arguments:  1
-            Arguments:  (1) [<server>]
+        Max Arguments:  2
+            Arguments:  (1) [<server>]  (2) [<Server ID>]
 
         This command is used to fetch various information about a server.
         If <server> argument is specified the command must be sent to
         the requested server.
 
+        If the <Server ID> is specified the server information if fetched
+        by the provided Server ID.
+
         Reply messages to the command:
 
         Max Arguments:  4
@@ -2402,6 +2412,8 @@ List of all defined commands in SILC follows.
             SILC_STATUS_ERR_NOT_ENOUGH_PARAMS
             SILC_STATUS_ERR_TOO_MANY_PARAMS
             SILC_STATUS_ERR_NO_SUCH_SERVER
+            SILC_STATUS_ERR_NO_SUCH_SERVER_ID
+            SILC_STATUS_ERR_NO_SERVER_ID
 
 
    11   SILC_COMMAND_CONNECT
@@ -2548,13 +2560,13 @@ List of all defined commands in SILC follows.
         Reply messages to the command:
 
         Max Arguments:  14
-            Arguments:  (1) <Status Payload>      (2) <channel> 
-                        (3) <Channel ID>          (4) <Client ID>
-                        (5) <channel mode mask>   (6) <created>
-                        (7) <Channel Key Payload> (8) [<ban list>]
-                        (9) [<invite list>]       (10) [<topic>]
-                        (11) [<hmac>]             (12) <list count>
-                        (13) <Client ID list>     (14) <client mode list>
+            Arguments:  (1) <Status Payload>        (2) <channel> 
+                        (3) <Channel ID>            (4) <Client ID>
+                        (5) <channel mode mask>     (6) <created>
+                        (7) [<Channel Key Payload>] (8) [<ban list>]
+                        (9) [<invite list>]         (10) [<topic>]
+                        (11) [<hmac>]               (12) <list count>
+                        (13) <Client ID list>       (14) <client mode list>
 
         This command replies with the channel name requested by the
         client, channel ID of the channel and topic of the channel
@@ -2654,6 +2666,7 @@ List of all defined commands in SILC follows.
               privileges by SILC_COMMAND_SILCOPER command.  Client
               may unset the mode itself.
 
+
         Reply messages to the command:
 
         Max Arguments:  2
@@ -2986,9 +2999,6 @@ List of all defined commands in SILC follows.
             SILC_STATUS_ERR_NO_SERVER_PRIV
 
 
-
-
-
    21   SILC_COMMAND_CLOSE
 
         Max Arguments:  2