X-Git-Url: http://git.silcnet.org/gitweb/?a=blobdiff_plain;f=apps%2Firssi%2Fdefault.theme;fp=apps%2Firssi%2Fdefault.theme;h=501a161797d60081456a0615c290caf62098ff50;hb=23c5df1c8b0bfe539d3fa65802186e6e09e044aa;hp=0000000000000000000000000000000000000000;hpb=0f9738ce962b8498bbed0a75d5fb6fa127e3577f;p=silc.git

diff --git a/apps/irssi/default.theme b/apps/irssi/default.theme
new file mode 100644
index 00000000..501a1617
--- /dev/null
+++ b/apps/irssi/default.theme
@@ -0,0 +1,260 @@
+# When testing changes, the easiest way to reload the theme is with /RELOAD.
+# This reloads the configuration file too, so if you did any changes remember
+# to /SAVE it first. Remember also that /SAVE overwrites the theme file with
+# old data so keep backups :)
+
+# TEMPLATES:
+
+# The real text formats that irssi uses are the ones you can find with
+# /FORMAT command. Back in the old days all the colors and texts were mixed
+# up in those formats, and it was really hard to change the colors since you
+# might have had to change them in tens of different places. So, then came
+# this templating system.
+
+# Now the /FORMATs don't have any colors in them, and they also have very
+# little other styling. Most of the stuff you need to change is in this
+# theme file. If you can't change something here, you can always go back
+# to change the /FORMATs directly, they're also saved in these .theme files.
+
+# So .. the templates. They're those {blahblah} parts you see all over the
+# /FORMATs and here. Their usage is simply {name parameter1 parameter2}.
+# When irssi sees this kind of text, it goes to find "name" from abstracts
+# block below and sets "parameter1" into $0 and "parameter2" into $1 (you
+# can have more parameters of course). Templates can have subtemplates.
+# Here's a small example:
+#   /FORMAT format hello {colorify {underline world}}
+#   abstracts = { colorify = "%G$0-%n"; underline = "%U$0-%U"; }
+# When irssi expands the templates in "format", the final string would be:
+#   hello %G%Uworld%U%n
+# ie. underlined bright green "world" text.
+# and why "$0-", why not "$0"? $0 would only mean the first parameter,
+# $0- means all the parameters. With {underline hello world} you'd really
+# want to underline both of the words, not just the hello (and world would
+# actually be removed entirely).
+
+# COLORS:
+
+# You can find definitions for the color format codes in docs/formats.txt.
+
+# There's one difference here though. %n format. Normally it means the
+# default color of the terminal (white mostly), but here it means the
+# "reset color back to the one it was in higher template". For example
+# if there was /FORMAT test %g{foo}bar, and foo = "%Y$0%n", irssi would
+# print yellow "foo" (as set with %Y) but "bar" would be green, which was
+# set at the beginning before the {foo} template. If there wasn't the %g
+# at start, the normal behaviour of %n would occur. If you _really_ want
+# to use the terminal's default color, use %N.
+
+#############################################################################
+
+# default foreground color (%N) - 0 is the "default terminal color"
+default_color = 0;
+# default foreground color when "0" can't be used,
+# such as with bolds and reverses. white is default.
+default_real_color = 7;
+
+# these characters are automatically replaced with specified color
+# (dark grey by default)
+replaces = { "[]<>=" = "%K$0-%n"; };
+
+abstracts = {
+  ##
+  ## generic
+  ##
+
+  # text to insert at the beginning of each non-message line
+  line_start = "%B-%W!%B-%n ";
+
+  # timestamp styling, nothing by default
+  timestamp = "$0-";
+
+  # any kind of text that needs hilighting, default is to bold
+  hilight = "%_$0-%_";
+
+  # any kind of error message, default is bright red
+  error = "%R$0-%n";
+
+  # channel name is printed
+  channel = "%_$0-%_";
+
+  # nick is printed
+  nick = "%_$0-%_";
+
+  # nick host is printed
+  nickhost = "[$0-]";
+
+  # server name is printed
+  server = "%_$0-%_";
+
+  # some kind of comment is printed
+  comment = "[$0-]";
+
+  # reason for something is printed (part, quit, kick, ..)
+  reason = "{comment $0-}";
+
+  # mode change is printed ([+o nick])
+  mode = "{comment $0-}";
+
+  ##
+  ## channel specific messages
+  ##
+
+  # highlighted nick/host is printed (joins)
+  channick_hilight = "%C$0-%n";
+  chanhost_hilight = "{nickhost %c$0-%n}";
+
+  # nick/host is printed (parts, quits, etc.)
+  channick = "%c$0-%n";
+  chanhost = "{nickhost $0-}";
+
+  # highlighted channel name is printed
+  channelhilight = "%c$0-%n";
+
+  # ban/ban exception/invite list mask is printed
+  ban = "%c$0-%n";
+
+  ##
+  ## messages
+  ##
+
+  # the basic styling of how to print message, $0 = nick mode, $1 = nick
+  msgnick = "<$0$1-> %|";
+
+  # message from you is printed. "msgownnick" specifies the styling of the
+  # nick ($0 part in msgnick) and "ownmsgnick" specifies the styling of the
+  # whole line.
+
+  # Example1: You want the message text to be green:
+  #  ownmsgnick = "{msgnick $0 $1-}%g";
+  # Example2.1: You want < and > chars to be yellow:
+  #  ownmsgnick = "%Y{msgnick $0 $1-%Y}%n";
+  #  (you'll also have to remove <> from replaces list above)
+  # Example2.2: But you still want to keep <> grey for other messages:
+  #  pubmsgnick = "%K{msgnick $0 $1-%K}%n";
+  #  pubmsgmenick = "%K{msgnick $0 $1-%K}%n";
+  #  pubmsghinick = "%K{msgnick $1 $0$2-%n%K}%n";
+  #  ownprivmsgnick = "%K{msgnick  $0-%K}%n";
+  #  privmsgnick = "%K{msgnick  %R$0-%K}%n";
+
+  # $0 = nick mode, $1 = nick
+  ownmsgnick = "{msgnick $0 $1-}";
+  ownnick = "%W$0-%n";
+
+  # public message in channel, $0 = nick mode, $1 = nick
+  pubmsgnick = "{msgnick $0 $1-}";
+  pubnick = "%N$0-%n";
+
+  # public message in channel meant for me, $0 = nick mode, $1 = nick
+  pubmsgmenick = "{msgnick $0 $1-}";
+  menick = "%Y$0-%n";
+
+  # public highlighted message in channel
+  # $0 = highlight color, $1 = nick mode, $2 = nick
+  pubmsghinick = "{msgnick $1 $0$2-%n}";
+
+  # channel name is printed with message
+  msgchannel = "%K:%c$0-%n";
+
+  # private message, $0 = nick, $1 = host
+  privmsg = "[%R$0%K(%r$1-%K)%n] ";
+
+  # private message from you, $0 = "msg", $1 = target nick
+  ownprivmsg = "[%r$0%K(%R$1-%K)%n] ";
+
+  # own private message in query
+  ownprivmsgnick = "{msgnick  $0-}";
+  ownprivnick = "%W$0-%n";
+
+  # private message in query
+  privmsgnick = "{msgnick  %R$0-%n}";
+
+  ##
+  ## Actions (/ME stuff)
+  ##
+
+  # used internally by this theme
+  action_core = "%W * $0-%n";
+
+  # generic one that's used by most actions
+  action = "{action_core $0-} ";
+
+  # own action, both private/public
+  ownaction = "{action $0-}";
+
+  # own action with target, both private/public
+  ownaction_target = "{action_core $0}%K:%c$1%n ";
+
+  # private action sent by others
+  pvtaction = "%W (*) $0-%n ";
+  pvtaction_query = "{action $0-}";
+
+  # public action sent by others
+  pubaction = "{action $0-}";
+
+
+  ##
+  ## other IRC events
+  ##
+
+  # notices
+  ownnotice = "[%r$0%K(%R$1-%K)]%n ";
+  notice = "%K-%M$0-%K-%n ";
+  pubnotice_channel = "%K:%m$0-";
+  pvtnotice_host = "%K(%m$0-%K)";
+  servernotice = "%g!$0-%n ";
+
+  # CTCPs
+  ownctcp = "[%r$0%K(%R$1-%K)] ";
+  ctcp = "%g$0-%n";
+
+  # wallops
+  wallop = "%W$0-%n: ";
+  wallop_nick = "%n$0-";
+  wallop_action = "%W * $0-%n ";
+
+  # netsplits
+  netsplit = "%R$0-%n";
+  netjoin = "%C$0-%n";
+
+  # /names list
+  names_nick = "[%_$0%_$1-] ";
+  names_users = "[%g$0-%n]";
+  names_channel = "%G$0-%n";
+
+  # DCC
+  dcc = "%g$0-%n";
+  dccfile = "%_$0-%_";
+
+  # DCC chat, own msg/action
+  dccownmsg = "[%r$0%K($1-%K)%n] ";
+  dccownnick = "%R$0-%n";
+  dccownaction = "{action $0-}";
+  dccownaction_target = "{action_core $0}%K:%c$1%n ";
+
+  # DCC chat, others
+  dccmsg = "[%G$1-%K(%g$0%K)%n] ";
+  dccquerynick = "%G$0-%n";
+  dccaction = "%W (*dcc*) $0-%n %|";
+
+  ##
+  ## statusbar
+  ##
+
+  # background of statusbar
+  sb_background = "%4";
+
+  # default statusbar item style
+  sb = "%c[%n$0-%c]%n";
+
+  sbmode = "(%c+%n$0-)";
+  sbaway = " (%GzZzZ%n)";
+  sbservertag = "%c:%n$0 (change with ^X)";
+  sbmore = "%_-- more --%_";
+  sblag = "{sb Lag: $0-}";
+  sbmail = "{sb Mail: $0-}";
+
+  # activity. Det is used for hilights when display doesn't support colors
+  sbact = "{sb {sbact_act $0}{sbact_det $1}}";
+  sbact_act = "Act: $0-";
+  sbact_det = " Det: $0-";
+};