1 /* Predefined stub functions for the SilcClientOperation callbacks.
2 You can freely use this template in your application. These are
3 the functions that you as an application programmer need to implement
4 for the library. The library may call these functions at any time.
6 At the end of this file SilcClientOperation structure is defined, and
7 it is the one the you will give as an argument to the silc_client_alloc
8 function. See also lib/silcclient/README file, and silcclient.h. */
11 /* Message sent to the application by library. `conn' associates the
12 message to a specific connection. `conn', however, may be NULL.
13 The `type' indicates the type of the message sent by the library.
14 The applicationi can for example filter the message according the
18 silc_say(SilcClient client, SilcClientConnection conn,
19 SilcClientMessageType type, char *msg, ...)
25 /* Message for a channel. The `sender' is the sender of the message
26 The `channel' is the channel. The `msg' is the message. Note that
30 silc_channel_message(SilcClient client, SilcClientConnection conn,
31 SilcClientEntry sender, SilcChannelEntry channel,
32 SilcMessageFlags flags, const unsigned char *message,
33 SilcUInt32 message_len);
39 /* Private message to the client. The `sender' is the sender of the
43 silc_private_message(SilcClient client, SilcClientConnection conn,
44 SilcClientEntry sender, SilcMessageFlags flags,
45 const unsigned char *message,
46 SilcUInt32 message_len);
52 /* Notify message to the client. The notify arguments are sent in the
53 same order as servers sends them. The arguments are same as received
54 from the server except for ID's. If ID is received application receives
55 the corresponding entry to the ID. For example, if Client ID is received
56 application receives SilcClientEntry. Also, if the notify type is
57 for channel the channel entry is sent to application (even if server
58 does not send it because client library gets the channel entry from
59 the Channel ID in the packet's header). */
62 silc_notify(SilcClient client, SilcClientConnection conn,
63 SilcNotifyType type, ...)
69 /* Command handler. This function is called always in the command function.
70 If error occurs it will be called as well. `conn' is the associated
71 client connection. `cmd_context' is the command context that was
72 originally sent to the command. `success' is FALSE if error occurred
73 during command. `command' is the command being processed. It must be
74 noted that this is not reply from server. This is merely called just
75 after application has called the command. Just to tell application
76 that the command really was processed. */
79 silc_command(SilcClient client, SilcClientConnection conn,
80 SilcClientCommandContext cmd_context, int success,
87 /* Command reply handler. This function is called always in the command reply
88 function. If error occurs it will be called as well. Normal scenario
89 is that it will be called after the received command data has been parsed
90 and processed. The function is used to pass the received command data to
93 `conn' is the associated client connection. `cmd_payload' is the command
94 payload data received from server and it can be ignored. It is provided
95 if the application would like to re-parse the received command data,
96 however, it must be noted that the data is parsed already by the library
97 thus the payload can be ignored. `success' is FALSE if error occurred.
98 In this case arguments are not sent to the application. The `status' is
99 the command reply status server returned. The `command' is the command
100 reply being processed. The function has variable argument list and each
101 command defines the number and type of arguments it passes to the
102 application (on error they are not sent). */
105 silc_command_reply(SilcClient client, SilcClientConnection conn,
106 SilcCommandPayload cmd_payload, int success,
107 SilcCommand command, SilcCommandStatus status, ...)
113 /* Called to indicate that connection was either successfully established
114 or connecting failed. This is also the first time application receives
115 the SilcClientConnection objecet which it should save somewhere.
116 If the `success' is FALSE the application must always call the function
117 silc_client_close_connection. */
120 silc_connect(SilcClient client, SilcClientConnection conn, int success)
126 /* Called to indicate that connection was disconnected to the server. */
129 silc_disconnect(SilcClient client, SilcClientConnection conn)
135 /* Find authentication method and authentication data by hostname and
136 port. The hostname may be IP address as well. When the authentication
137 method has been resolved the `completion' callback with the found
138 authentication method and authentication data is called. The `conn'
142 silc_get_auth_method(SilcClient client, SilcClientConnection conn,
143 char *hostname, SilcUInt16 port, SilcGetAuthMeth completion,
150 /* Verifies received public key. The `conn_type' indicates which entity
151 (server, client etc.) has sent the public key. If user decides to trust
152 the key may be saved as trusted public key for later use. The
153 `completion' must be called after the public key has been verified. */
156 silc_verify_public_key(SilcClient client, SilcClientConnection conn,
157 SilcSocketType conn_type, unsigned char *pk,
158 SilcUInt32 pk_len, SilcSKEPKType pk_type,
159 SilcVerifyPublicKey completion, void *context)
165 /* Ask (interact, that is) a passphrase from user. The passphrase is
166 returned to the library by calling the `completion' callback with
167 the `context'. The returned passphrase SHOULD be in UTF-8 encoded,
168 if not then the library will attempt to encode. */
171 silc_ask_passphrase(SilcClient client, SilcClientConnection conn,
172 SilcAskPassphrase completion, void *context)
178 /* Notifies application that failure packet was received. This is called
179 if there is some protocol active in the client. The `protocol' is the
180 protocol context. The `failure' is opaque pointer to the failure
181 indication. Note, that the `failure' is protocol dependant and
182 application must explicitly cast it to correct type. Usually `failure'
183 is 32 bit failure type (see protocol specs for all protocol failure
187 silc_failure(SilcClient client, SilcClientConnection conn,
188 SilcProtocol protocol, void *failure)
194 /* Asks whether the user would like to perform the key agreement protocol.
195 This is called after we have received an key agreement packet or an
196 reply to our key agreement packet. This returns TRUE if the user wants
197 the library to perform the key agreement protocol and FALSE if it is not
198 desired (application may start it later by calling the function
199 silc_client_perform_key_agreement). If TRUE is returned also the
200 `completion' and `context' arguments must be set by the application. */
203 silc_key_agreement(SilcClient client, SilcClientConnection conn,
204 SilcClientEntry client_entry, const char *hostname,
205 SilcUInt16 port, SilcKeyAgreementCallback *completion,
212 /* Notifies application that file transfer protocol session is being
213 requested by the remote client indicated by the `client_entry' from
214 the `hostname' and `port'. The `session_id' is the file transfer
215 session and it can be used to either accept or reject the file
216 transfer request, by calling the silc_client_file_receive or
217 silc_client_file_close, respectively. */
220 silc_ftp(SilcClient client, SilcClientConnection conn,
221 SilcClientEntry client_entry, SilcUInt32 session_id,
222 const char *hostname, SilcUInt16 port)
228 /* The SilcClientOperation structure containing the operation functions.
229 You will give this as an argument to silc_client_alloc function. */
230 SilcClientOperations ops = {
232 silc_channel_message,
233 silc_private_message,
239 silc_get_auth_method,
240 silc_verify_public_key,