1 TODO/bugs in Irssi SILC client
2 ==============================
4 o /cumode for unknown nick does not give any error message (Fix this to
8 TODO/bugs In SILC Client Library
9 ================================
11 o The PRIVATE_MESSAGE_KEY packet is not handled (it is implemented
12 though). This should be added and perhaps new client operation
13 should be added to notify application that it was received and
14 set the key only if application wishes to set (accept the key) it
17 o Additions to do after protocol version 1.1:
19 o Fix the NICK_CHANGE notify handling not to create new entry
20 for the changed client, but take the nickname from the notify
21 (removes need for resolving as well). Protocol TODO entry 3.
23 o Add support for list of errors in command replies. Protocol
27 TODO/bugs In SILC Server
28 ========================
30 o KICKing doesn't work.
32 o Configuration file additions (Do this to 0.8.x):
34 o Add incoming connection frequency, incoming connection frequency
35 for single IP address, key exchange frequency, key exchange
36 frequency for single IP. Add also frequency base.
38 o Add rehashing support.
40 o If server send CUMODE_CHANGE notify (like setting founder) to router
41 and router does not have founder on channel (founder is left or there's
42 no founder on channel at all), the router will accept the server's
43 founder mode change, even though it perhaps should not do that (Fix
46 o The router should check for validity of received notify packets from
47 routers (fix this to 0.9). Following NOTIFYs needs to be verified:
49 o JOIN (check that joining is allowed)
50 o SIGNOFF (maybe should check that notifier owns the client)
51 o KILLED (check that killling is allowed (Protocol TODO #13))
53 o Backup router related issues (Fix this to 1.0):
55 o Channel user mode changes are notified unnecessarely when
56 switching to backup router on router crash.
58 o Add a timeout to handling incoming JOIN commands. It should be
59 enforced that JOIN command is executed only once in a second or two
60 seconds. Now it is possible to accept n incoming JOIN commands
61 and process them without any timeouts. THis must be employed because
62 each JOIN command will create and distribute the new channel key
63 to everybody on the channel (Fix this to 1.0).
65 o Lots of statistics updating is missing around the server.
67 o If client's public key is saved in the server (and doing public key
68 authentication) then the hostname and the username information could
69 be taken from the public key. Should be a configuration option!
72 TODO/bugs In SILC Libraries
73 ===========================
75 o WIN32 silc_net_create_connection_async does not work the same way
76 than on Unix. Do it with threads on WIN32. The function works but
77 is not actually async currently.
79 o EPOC specific additions/changes required:
81 o lib/silcutil/epoc routines missing or not completed.
84 TODO in Toolkit Documentation
85 =============================
87 Stuff that needs to be done in order to complete the Tooolkit Reference
90 o ROBOdoc documenting missing from lib/silcutil/silcbuffer.h.
92 o ROBOdoc documenting missing from lib/silcutil/silcdlist.h.
94 o ROBOdoc documenting missing from lib/silcutil/silcfileutil.h.
96 o ROBOdoc documenting missing from lib/silcutil/silcutil.h.
98 o ROBOdoc documenting missing from lib/silccrypt/silchash.h.
100 o ROBOdoc documenting missing from lib/silccrypt/silccipher.h.
102 o ROBOdoc documenting missing from lib/silccrypt/silcpkcs.h.
104 o Write "Programming with Toolkit" document, describing how to build
105 Toolkit, how the build system works, where is everything, how
106 new (external) projects can be glued into Toolkit (use irssi as an
107 example), and how external projects can use Toolkit without gluing into
108 it (how to link etc), debugging, architecture, types, etc.
110 o Write "Platform Implementations" document to describe what platforms
111 Toolkit support, what has been implemented, what has not been, what
112 works differently etc.
115 TODO in SILC Protocol
116 =====================
118 Current protocol version is 1.0. However, it is far from being perfect,
119 and needs to include additional features. Following protocol TODO entries
120 describe new stuff to be added to protocol versions 1.x.
122 1. Re-define the Status Payload: it is now 16 bits, split it into two
123 8 bits fields. First field includes status types from 0 - 9 and
124 10 - n *if* it is not an list of errors. If it is list of errors then
125 the first field includes 1, 2 and/or 3, and the second field includes
126 the error status 10 - n. This way it is possible to send multiple
127 errors (list of errors) and we have a way to tell the receiver that
128 there will be other errors as well. The second field is used only
129 if there is list of errors. If normal status, or normal (single)
130 error status the second field is set to zero, and must be ignored.
131 Hence, the status works same way as now except for list of errors.
132 To be included in protocol version 1.1.
134 2. Define that WHOIS and IDENTIFY commands must send list of errors
135 if multiple Client ID (or Channel ID and Server ID for IDENTIFY) was
136 requested and was not found. Each unfound entry must cause an error
137 command reply to the sender. Also define that errors must be sent
138 *after* sending successfully found entries (this way receiver may
139 ignore them). To be included in protocol version 1.1.
141 3. Define the NICK_CHANGE notify to send the changed nickname as a new
142 third argument. This will make the NICK_CHANGE notify handling easier
143 in the receiver's end (client primarily) since it removes the
144 requirement that receiver must resolve (using IDENTIFY or WHOIS) the
145 new Client ID received in the notify (because of the new nickname is
146 unknown). To be included in protocol version 1.1.
148 4. Add "request parameters" or similar to the WHOIS command, which can
149 be used to request various parameters (something not returned by
150 standard WHOIS command) about clients (info that could be fetched
151 even from clients). Additional specification (or appendix) should
152 be done to define the payload and the parameters. It could be used
153 to make the WHOIS command support various search conditions as well.
154 This would be the way to extend the WHOIS command to support various
155 new features without always making the command incompatible to previous
156 version. To be included in protocol version 1.1.
158 5. Inviting and banning by public key should be made possible. To be
159 included in protocol version 1.x.
161 6. Add perhaps SILENCE_USERS, SILENCE_OPERS channel user modes which
162 can be used to silence (moderate) normal users and opers (this set
163 only by founder). To be included in protocol version 1.1.
165 7. Channel Message Payload needs slight redesining to include the IV
166 field to the MAC generation of the payload. It is authenticated
167 by the packet's MAC but not by the payload's MAC. Since the IV
168 belongs to the payload, its integrity should be protected by the
169 payload MAC and not alone by packet MAC. To be included in protocol
172 8. Remove the administrative commands from the protocol all together.
173 It does not make sense for the protocol to define how a server is
174 reconnected or shutdown, since they are implementation and
175 configuration issues. Besides protocol provides only limited set of
176 administrative commands and cannot define all that one could imagine.
177 To be included in protocol version 1.1.
179 9. Add SILC_MESAGE_FLAG_REPLY for being other side to the
180 SILC_MESSAGE_FLAG_REQUEST. Add generic SILC_MESSAGE_FLAG_DATA, which
181 can include generic payload, which can include generic data. The
182 payload definition is left out for now. To be included in protocol
185 10. Check command reply error status types in various commands,
186 specifically NO_FOPRIV is missing from many commands. To be
187 included in protocol version 1.1.
189 11. Change the wording in Private Message Key Payload definition to
190 describe the problems of trusting the payload, and to indicate that
191 the receiver may not accept the key in the payload, and to describe
192 other means of distributing a key.
194 13. Add the killer's client ID to the KILLED notify. To be included in
195 protocol version 1.1.
197 14. The length of Arguments Num field in Notify Payload and Command
198 Payload enforces that total of 256 arguments can be associated
199 to a such payload. However, command-xx draft specified much higher
200 values, and these should be fixed.